Benutzeranleitung / Produktwartung 358.796131- 26.2CC des Produzenten Craftsman
Zur Seite of 28
operator's manual MODEL NO. 358.796131 - 26.2cc ___ WARNING: Carefully read and follow Safety Rules, Precautions and Operating Instructions. Failure to do sO-can result in serious personal injury.
FULL ONE YEAR WARRANTY ON SEARS CRAFTSMAN GAS WEEDWACKER ® If this CRAFTSMAN GAS WEEDWACKER trimmer fails toperform properly due to adefect in materia! or workmanshipwithin one year of purchase, Sears will repair it, free of charge.
SAFETY RULES AND PRECAUTIONS Failure to follow safety rules and precautions could result in serious personal injury. AI KNOW YOUR UNIT 1. Read your Operator's Manual carefully until you completely understand and can follow all safety rules, precautions and operating instructions before operating the unit.
KNOW YOUR WEEDWACKER ® TRIMMER A. INTRODUCTION Your WEEDWACKER ® Trimmer is a versatile product developed for large lawns and to make short work of a variety of lawn care tasks - trimming, mowing, edging, sweeping, and scalping.
ASSEMBLY A. PREPARATION Your Operator's Manual has been developed to help you assemble the unit and to understand its safe opera- tion. It is important that you read your manual com- pletely to become familiar with the unit before you begin assembly.
3. SPLASH DEFLECTOR -- Figure 4 a. Locate the raised "V" ridge on the splash deflector into the indented "V" slot on the drive shaft housing. Figure 4. b. Rest the bottom of the splash deflector on top of the drive shaft housing shoulder above the dust cup.
b. USE THE M 1GALLON REGULAR UNLEADED GASOLINE FOLLOWING: + --OR-- = 2. HOW TO MIX FUEL AND FILL TANK -a. Pour 112 gallon gasoline into an approved marked container. Do not try to mix fuel directly in the fuel tank. b. Add entire measure of 2-cycle engine oil.
2. STARTING PROCEDURE 3. IMPORTANT POINTS TO REMEMBER a. Extenda minimumof4inchesoflinefromthe cutting head to provide the correct load on the engine. b. Stand in the operating position, and place the cutting head on the ground. Figure 9. This insures that fuel will flow into the in- jector pump.
D= Sm OPERATING INSTRUCTIONS For maximum performance and efficiency: 1. Always accelerate the engine to the desired speed before cutting. 2, Never operate the engine at a higher speed than necessary. 3. Always release the trigger and allow the en- gine to return to idle speed when not cutting.
USING YOUR UNIT Your Trimmer is equipped with a semi-automatic advancing cutting head that cuts with the tip of a monofilament nylon line. The nylon cutting line will easily remove grass and weeds from around walls, fences, trees, and flower beds, but it also can cut the tender bark of trees or shrubs and scar fences.
C. CUTTING METHODS • The tip of the line does the cutting. Allow the unit to trim at its own pace. You wilJ achieve better results by not crowding the line into the cutting area. The right way and wrong way are shown in Figure 13. • Always cut left to right, ii RIGHT , I '- _WRONG iii i Figure 13 _WARNING Always wear eye protection.
D. CUTTING HEAD MAINTENANCE 1. CUTTING LINE REPLACEMENT a. Hold the cutting head as shown in Figure 18. Press the lock tab, and turn lock ring counter- clockwise b. Remove the lock ring, tap button, and spool. Figure 19. c. Clean dirt and debris from housing and spool.
h. Pull on the nylon line to change the spool from the locked position to the operating position. Figure 24. Obtain correct line length by pressing tap button and pulling on nylon line again. NOTE: Approximately 2 inches of line can be advanced each time the tap button is pressed.
GENERAL MAINTENANCE A. DRIVE SHAFT LUBRICATION • Lubricate the Flexible Drive Shaft: -- After each ten (10) hours of operation: -- Before operating if the unit has been stored for 90 days or longer. • Use gear grease stock #28-59071. NOTE: A tube of grease has been suppliedwith your unit to be used after the first 10 hours of operation.
D. STARTER ROPE REPAIR • Repair the starter rope If the rope breaks next to the pulley. • Replace the starter rope if the rope breaks 2-3 inches away from the pulley as the rope will be too short to repair properly. /_WARNING Always wear eye protection when ser- vicing the starter rope.
TROUBLE SHOOTING CHART TROUBLE CAUSE Engine will not start 1. Ignition switch off. 2. Fuel tank empty, 3, Spark plug not firing. 4. Fuel not reaching carburetor, 5. Engine flooded. 6. Compression low. Engine will not idle properly Engine will not - 1.
ACCESSORIES A. ACCESSORIES 2-Cycle Engine Oil ............................................ Stock No. Gear Grease (14-112oz.) ........................................ Stock No. Spark Plug ................................................... Part No. Replacement Cutting Head .
SEARS WEEDWACKER ® PARTS LIST -- MODEL 358.796131 -26.2cc Figure 1 25 101 26 27 28 29 30 f I 10 31 19 2O 14 18.
SEARS WEEDWACKER ® PARTS LIST m MODEL 358.796131-26.2cc Figure I KEY NO. 1 PART NO. 706515 QTY. RECL 1 2 93896 1 3 93898 1 4 92067 1 5 92068 1 6 93897 1 7 706502 1 8 ....... 9338? ..... 1 9 92133 1 10 92243 2 "93653 1 93716 1 94440 1 15337 2 93853 1 STD 2 540410 11 12 14 15 19 2O DESCRIPTION Cutting Head Assembley Stock #71-85764 (Incl.
SEARS WEEDWACKER ® PARTS LIST -- MODEL 358.796131-26.2cc Figure 2 21 J I I t I I I 6 ] 11 ! ! 24 ( -35 43 36 20.
SEARS WEEDWACKER ® PARTS LIST -- MODEL 358.796131-26.2cc Figure 2 KEY NO. 1 2 3 5 24371 6 23575 7 STD 6108O7 8 69182 9 15706 10 24569 11 15582 12 24461 13 15367 14 26109 15 21052 16 10729 18 22290 19 21053 20 26931 21. 69178 22 _ 42067 - 23 26035 24 15544* 25 26048 PART QTY.
SEARS WEEDWACKER ® PARTS LIST -- MODEL 358.796131-26.2cc Figure 3 4 10- 11- 7 16 35 51 52 9 7 53 54 57 58 22.
SEARS WEEDWACKER ® PARTS LIST- MODEL 358.796131-26.2cc Figure 3 KEY NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 2O 21 22 23 24 25 26 :27 26 29 3O PART NO.
SEARS WEEDWACKER ® PARTS LIST -- MODEL 358.796131-26.2cc CARBURETOR NUMBER 35183 Figure 4 KEY PART NO. NO. 1 35017 2 35191 3 35164 4 35156 5_ 35178 6 35166 7 35133 8 35007 9 35138 10 35015 11 35132 12 35023 13 35141 14 35106 15 35031 16 35o31 QTY'.
NOTES 25.
NOTES 26.
I I I IIII III III QUICK REFERENCE PAGE Read and follow all Safety Rules, Precautions and Operating Instructions. Failure to do so can cause in serious personal injury. PAGE PREPARATION .................................................................
MODEL NO. 358.796131 - 26.2cc How to Order Repair Parts SEARS SERVICE IS AT YOUR SERVICE The Model Number will be found under the handle with the Serial Number. Always mention the Model Number when requesting service or repair parts for your unit. All parts listed herein may be ordered from any Sears Service Center and most Sears Stores.
Ein wichtiger Punkt beim Kauf des Geräts Craftsman 358.796131- 26.2CC (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Craftsman 358.796131- 26.2CC noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Craftsman 358.796131- 26.2CC - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Craftsman 358.796131- 26.2CC reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Craftsman 358.796131- 26.2CC erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Craftsman 358.796131- 26.2CC besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Craftsman 358.796131- 26.2CC verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Craftsman 358.796131- 26.2CC. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Craftsman 358.796131- 26.2CC gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
