Benutzeranleitung / Produktwartung 137.219 des Produzenten Craftsman
Zur Seite of 24
Operator's ManuaM .3 10 in. DRILL PRESS With Laser Trac ® Model No, 137,219000 CAUTION: Before using this DriJl Press, read this manual and follow all its Safety Rules and Operating Instructions o Safety Instructions o Installation ® Operation o Maintenance • Parts List Customer He_p Line 1-80@-843-1682 Sears, Roebuck and Co.
SECTmON PAGE Warranty ........................................ 2 Product Specifications ....................... 2 Power Tool Safety ............................. 3 Drill Press Safety .................................. 4 Electrical Requirements and Safety .
GENERAL SAFETY mNSTRUCTmONS BEFORE USING THIS DRILL PRESS Safety is a combination of common sense, stay alert and knowing how to use your dril! press. [AWARN NG I To avoid mistakes that could cause serious injury, do not plug the drill press in until you have read and understood the following.
[AWARNING I For your own safety, do not try to use your drill press or plug it in until it is completely assembled and installed according to the instructions, and until you have read and understood this instruction manual: 1. YOUR DRILL PRESS MUST BE BOLTED securely to a workbench.
GROUNDING INSTRUCTIONS tNTHE EVENT OF A _,_ALFUNCTION OR BREAKDOWN, grounding provides a path of least resistance forelectric current and reduces the risk of shock. This tool is equipped with an electric cordthat has an equipment grounding conductor andgrounding plug.
RECOMMENDED ACCESSORmES [AWARN NG I Use only accessories recommend for this drill press. Follow instructions that accompany accessories. Use of improper accessories may cause hazards.
UNPACKING AND CHECKING CONTENTS D E H I WWWW K N O # DD Q S R.
Belt spee_ Oo Quill retu Depth stop nuts Depth scale pointer - --C / Depth scale in coil / spring Rack ring Table bracket Spindle pulley Motor pulley Table bracket lock handle Bevel lock bolt Pulley c.
BASE - Supports dril! press. For additional stability, holes are provided in base to bolt drill press to workbench. BACKUP MATERIAL - A piece of scrap wood placed between the workpiece and table. The backup board prevents wood in the workpiece from splintering when the drill passes through the backside of the workpiece.
ASSEMBLY JNSTRUCTmONS [AWARNmNG 1 For your own safety, never connect plug to power source outlet until all assembly steps are complete and you have read and understood the safety and operating instructions. [AWARN NG I The drill press is a heavy power too! and should be lifted with the help of two PEOPLE OR MORE to safely assemble it.
4_ Slide the table assembly withtherack onto the column. 5_ Engage the bottom of the rack (5) with the lip of the column support (6)_ Tighten thetable bracket lock handle (4) to lock the table assembly tothe column.
tNSTALUNG FEED HANDLES (FIG. H) 1_ Thread each feed handle (1) into the threaded holes (2) on the hubassembly (3) andTighten_ Fig.H 4. Unlock the table support lock (4- Fig.D) andswing the table away from the bottom of the chuck. 5. Using a rubber mallet or a hammer and a block of wood, tap the chuck onto the spindle firmly (Fig.
FENCE ASSEMBLY (FIG. M) 1_ Align the mounting holes of the fence over the table slots. 2. Place a washer (2) on the threaded end of the knob (3). Insert the knob through the mounting hole of the fence and the table slot. 3. Place a washer and wing nut (4) on the knob from under the table.
[AWARNING I To prevent persona! injury, always disconnect the plug from the power source when making any adjustments. SPINDLE / QUILL (FIG. O) Rotate the feed handles counterclockwise to lower spindle to its lowest position. Hold the chuck and move it front to back.
[AWARNING I AVOID DIRECT EYE CONTACT A Laser light is radiated when the laser guide is turned on. Avoid direct eye contact. Always un=plug the drill press from the power source before making any adjustments. A laser pointer is not a toy and should not come into hands of children.
BASmC DRILL PRESS OPERATmONS NOTE: This machine incorporates view windows on the pulley cover used to observe the location of the belL [AWARN NG ! To avoid possible injury, keep guard closed and in place while tool is in operation. SPEEDS AND BELT PLACEMENT (FIG.
Fig.U 1 3 " USING THE FENCE (FIG. V) The fence provides a way of accurately and quickly setting up the workpiece for precision or for repitive drilling operations. 1. Using a centerpunch or sharp nail, make an indentation in the workpiece where you want to dril!.
Fig,× 3 5 7 f [AWAR"I"G i To avoid injury from an accidental start, ALWAYS make sure the power switch is in the "OFF" position, the switch key is removed, and the plug is not connected to the power source outlet before removing or installing the chuck.
POSITIONING THE TABLE AND WORKPtECE (FIG. AA AND BB) 1. Lock the table (1) to the column (2) at a position so the tip of the drill bit (3) is just above the top of the workpiece (4). 2. ALWAYS place a BACK-UP MATERIAL (scrap wood) on the table beneath the workpiece.
[AWARNING ] For your own safety, turn the switch OFF and remove the plug from the power source outlet before maintaining or lubricating your dril! press_ Frequently blow out, using an air compressor or dust vacuum, any dust that accumulates inside the motor.
[,&WARNING I To avoid injury from accidental starting, always turn switch OFF and unplug the tool before moving, replacing the blade or making adjustments. , Consult your Sears Service Center if for any reason the motor will not run. PROBLEM POSSIBLE CAUSES REMEDY Noisy operation 1.
10 in. DRmLL PRESS MODEL NO. 137.219000 [AWARNING I When servicing use only CRAFTSMAN replacement parts. Use of any other parts many create a HAZARD or cause product damage. [,_WARNING I Any attempt to repair or replace electriea! parts on this Drill Press may create a HAZARD unless repair is done by a qualified service technician.
10 in. DRILL PRESS SCHEMATIC MODEL NO. 137.219000 OJJZ 2C08 2C08 048K 04WG 0KDH 3 _0UGH OVPE 0KSQ 2 o_ 0K7K 048P 048Z OJP44 0KQY2 0L6D 06SV 0KDJ OKFF 2 OKUX 04AD 0KDJ2 04BM 0KC62 OLWC 047X 047U /-.
Your Home For repair - in your home - of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and Operator's Manuals that you need to do-itoyourself.
Ein wichtiger Punkt beim Kauf des Geräts Craftsman 137.219 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Craftsman 137.219 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Craftsman 137.219 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Craftsman 137.219 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Craftsman 137.219 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Craftsman 137.219 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Craftsman 137.219 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Craftsman 137.219. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Craftsman 137.219 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
