Benutzeranleitung / Produktwartung PR14KIT des Produzenten ConnectPRO
Zur Seite of 22
1 Limited Warranty IN NO EVENT SHALL THE DIRECT VENDOR'S LIABILITY FOR DIRECT OR INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF PROFIT, LOSS OF BUSINESS, OR FINANCIAL LOSS WHICH MAY BE CAUSED BY THE USE OF THE PRODUCT EXCEED THE PRICE PAID FOR THE PRODUCT.
2 Table of Contents CHAPTER 1 – I NTRODUCTION Overview 1 Features 1 Configurations 2 CHAPTER 2 – I NSTALLATION Installation Overview 3 Components 4 Single Master Configuration 5 Cascade Configurat.
3 Table of Contents – cont. CHAPTER 3 – O PERATION ( CONT .) Hot-Key Commands 9 To Select a Port 9 To Initiate or Deactivate Auto-Scan 10 To Initiate Manual Scan 10 To Adjust the Scan Rate Interva.
4 1 INTRODUCTION Overview Connect PRO is proud to announce the Master-IT PRO professional line of KVM switches. With the use of one keyboard, one monitor, and one mouse, multiple computer systems can be accessed and controlled.
5 Configurations The Master-IT PRO can be set up as a Single Master or cascaded in a Master/Slave configuration. A single master involves only one Master-IT PRO KVM switch, and has the keyboard, monitor and mouse directly connected to its’ console ports.
6 2 INSTALLATION Installation Overview Installation is simply a matter of connecting cables to their appropriate ports on each Master-IT PRO and each computer. Prior to beginning the installation procedures, verify that all Master-IT PRO KVM switches are powered OFF.
7 Single Master Configuration A Single Master configuration involves only one Master-IT PRO KVM switch into which the PS/2 keyboard, monitor and PS/2 mouse are directly connected as well as the computers.
8 Cascade Configuration (Master/Slave) A cascade configuration consists of one master unit and one or more slave units. The master unit has the PS/2 keyboard, PS/2 mouse and VGA monitor directly connected to its’ console ports, from which the operator will access any computer.
9 Dual-Console Configuration The advanced Dual-Console Master-IT PRO , has the same functionality and features as the single console version. However, it also enables individual access and control from either of two separate consoles at different locations.
10 Rack-Mount Kit (optional) An optional Rack-Mount Kit is available for Master-IT PRO models with 4 through 16 ports. It fits perfectly in standard 19” server racks. The kit includes side mount brackets, and a cable support bar, which mounts on the back of the rack enclosure.
11 3 OPERATION Front Panel Buttons Each Master-IT PRO model has front panel buttons, which can be used to initiate different functions manually. They can be used to select ports, initiate the Auto-Scan function, and reset keyboard and mouse connectivity.
12 Buzzers and Beeps Whenever a command or event is initiated, either a buzzer or beep will sound to indicate a successful or failed command. A built-in buzzer generates a high-pitch beep for correct .
13 T O I NITIATE OR D EACTIVATE A UTO -S CAN : Press and release the left CTRL key twice, followed by the F1 key once. C TRL , C TRL , F 1 To deactivate the Auto Scan feature, press and release the left CTRL key twice.
14 T O A DJUST THE K EYBOARD T YPEMATIC R ATE : To adjust keyboard typematic rate (characters/sec ), press and release the left CTRL key twice , followed by the F4 key once . C TRL , C TRL , F 4 Each time this key sequence is entered ,1 to 4 beeps will sound corresponding to 10 , 15 , 20 and 30 characters/sec respectively.
15 On-Screen-Display (OSD) T O I NITIATE OSD: Press and release the left CTRL key twice to view the hot-key menu. Press and release the left CTRL key three times to view the KVM MENU. The Hot-Key Menu shows instructions for the various OSD functions. Use this as a guide to become familiar with its’ functions.
16 F igure 6. On-Screen-Display T O SELECT A COMPUTER FROM WITHIN THE OSD: Use the ↑ ↑ (up), ↓ ↓ (down), and → → (right) arrow keys on the keyboard, to choose the computer, then press the ENTER key to finalize the selection.
17 E YE M ARK ( N N ): An eye mark ( N ) to the right of a name indicates this computer is selected to be monitored while in Scan mode. In OSD, t his mark can be switched on or off by pressing and releasing the F2 key once . T O L OCK A D EVICE WITH A P ASSWORD : 1.
18 4 APPENDIX Part Descriptions Master-IT PRO Models: Model # PR-12 PR-14 PR-18 PR-116 PR-28 PR-216 # of Console Ports 1 1 1 1 2 2 # of PC Ports 2 4 8 16 8 16 Max.
19 Troubleshooting If at any time the Master-IT PRO behaves abnormally, Consult the following table for possible solutions. As always, first verify that all cables are connected correctly and securely, and that all power adapters necessary are connected and functioning.
20 Troubleshooting - Cont. SYMPTOMS CAUSES SOLUTIONS The ↑ ↑ and ↓ ↓ keys do not work in Manual Scan mode . • Either all computers are powered OFF or only one computer is powered ON. • Scan type is eye mark selected but no ports are eye mark selected in OSD.
21 Troubleshooting – Cont. SYMPTOMS CAUSES SOLUTIONS Cannot switch to computers located on a slave. • The cables are not securely fastened. • There is a another slave cascaded to the first slave . • The slave has more ports than the master . • The slave is cascaded from a port other than 1~8 of the master.
22 Specifications PR-12 PR-14 PR-18 PR-116 PR-28 PR-216 # of Console Ports 111122 # of Computer Ports 2 4 8 16 8 16 Max. # of Computers 4 16 64 128 64 128 On-screen display (OSD) N/a Yes Front panel b.
Ein wichtiger Punkt beim Kauf des Geräts ConnectPRO PR14KIT (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie ConnectPRO PR14KIT noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für ConnectPRO PR14KIT - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von ConnectPRO PR14KIT reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über ConnectPRO PR14KIT erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon ConnectPRO PR14KIT besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von ConnectPRO PR14KIT verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit ConnectPRO PR14KIT. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei ConnectPRO PR14KIT gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
