Benutzeranleitung / Produktwartung 3047 des Produzenten Concord Camera
Zur Seite of 50
3047 User ’ s Guide.
1 ENGLISH CONGRA TULA TIONS Congratulations on the purchase of your new camera. Y our camera has been carefully engineered and manufactured to give you dependable operation. Read this manual before operating the camera to become more familiar with it.
2 T able of Contents GETTING ST ARTED ............................................................................................................4 Package Contents ......................................................................................
3 SOFTW ARE INST ALLA TION ............................................................................................ 24 Installing Y our Camera Driver .................................................................................................
4 GETTING ST ARTED GETTING ST ARTED P ACKAGE CONTENTS Check that all of the items shown below are included with your camera. • Digital Camera • Camera Case • Wrist Strap • CD-ROM(Includes Camera Driver , Photo editing software, multi-lingual User ’s Guide etc.
5 GETTING ST ARTED SYSTEM REQUIREMENTS Windows: • PC with processor better than MMX Pentium 300 MHz • Windows XP/2000/ME/98SE • Minimum 128 MB RAM • USB port • CD-ROM driver • 1024 x 768 monitor , 24-bit color (true color) Macintosh: • Mac OS 10 or later Specifications are subject to change without prior notice.
6 GETTING ST ARTED CAMERA OVERVIEW Camera The following illustrations show the names of each component, button and switch on the camera. Front V iew Back V iew Flash Viewfinder Lens Self-T imer/Red-ey.
7 GETTING ST ARTED T op View Bottom V iew Side V iew Shutter Button Battery Door SD Card Slot USB Port T erminal TV OUT T erminal Strap Eyelet Power Button T ripod Socket.
8 GETTING ST ARTED LCD indications Shooting Mode Review Mode Turning the LCD On or Of f: In Capture mode, the LCD can be turned on or off: 1. Press the ENTER button to turn off the icons on the LCD. 2. Press the ENTER button once more to turn the LCD off.
9 GETTING ST ARTED LOADING THE BA TTERIES The camera uses 2x AAA alkaline or rechargeable batteries. 1. Slide the battery door and lift it open. 2. Insert the batteries according to the polarity indication engraved on the battery contact as shown. 3. Close the battery door .
10 GETTING ST ARTED T o remove the SD card: Press the memory card into the slot then release. When the card is partially ejected, pull it out. Note: If the “ Memory Full! ” warning message appears on the LCD, it means the SD card or internal memory is full.
11 T AKING PICTURES AND VIDEOS CLIPS T AKING PICTURES 1. Power on the camera. 2. Slide the Function switch to (Capture mode). Note: In picture taking mode, the icon will be shown on the lower left side of the LCD. If this icon is not shown, press the button repeatedly until the icon is shown.
12 T AKING PICTURES AND VIDEOS CLIPS T AKING VIDEO CLIPS The camera can capture video clips with sound( Sound playback only on TV&PC). 1. T urn on the camera. 2. Slide the Function switch to (Capture mode). 3. Press the button repeatedly until the Video Mode icon appears on the LCD.
13 T AKING PICTURES AND VIDEOS CLIPS USING THE DIGIT AL ZOOM The camera provides up to 4x digital zoom. 1. Press the to zoom in. The digital zoom bar will be shown on the LCD. 2. Press the to zoom out or return to the normal mode. Important: 1. Hold your camera steady when using Digital Zoom to prevent blurred pictures, caused by jittery movement.
14 T AKING PICTURES AND VIDEOS CLIPS SETTING WHITE BALANCE When the white balance is set to match the light source, the camera can take picture more accurately . 1. Slide the Function switch to (Capture mode). 2. Press the MENU button, the LCD will show White Bal ( White Balance ) in highlight.
15 T AKING PICTURES AND VIDEOS CLIPS SETTING SIZE / RESOLUTION 1. Slide the Function switch to (Capture mode). 2. press the MENU button. 3. Press the or to select PS (Pict Size) and then press the Enter button. 4. Press the or button to select the desired size/resolution.
16 T AKING PICTURES AND VIDEOS CLIPS Setup menu and features Beeper( ): ON When Beeper is set on, a beep sound can be heard when the camera is powered on .
17 T AKING PICTURES AND VIDEOS CLIPS Language( ): English (Default) Setting the language to English. Français Setting the language to French. Deutsch Setting the language to German. Español Setting the language to Spanish. Italiano Setting the language to Italian.
18 REVIEWING YOUR FILES REVIEWING YOUR FILES VIEWING FILES 1. Slide the Function switch to (Playback mode). The last picture or video clip will be shown on the LCD. The file type will be shown on the lower left corner of the LCD: = Picture, = Video Clip 2.
19 REVIEWING YOUR FILES shows options as below: Single T o display one picture each time. Thumbnails T o display up to six files on the LCD at a time. Slide Show T o play a slide show of all the stored files one by one. 4. Press the or button to select ( [Thumbnail] ) and then press the Enter button.
20 DELETING STORED FILES DELETING STORED FILES Note: Once file is deleted, it cannot be recovered. DELETING ONE FILE 1. Slide the Function switch to (Playback mode). 2. Press the or button to select the picture or video you want to delete, and then press the MENU button.
21 DELETING STORED FILES FORMA TTING THE INTERNAL MEMOR Y OR SD CARD Caution: 1. Formatting will delete all pictures and video clips from the memory . 2. During the formatting process, never remove the memory card or batteries, as it will damage the card and/or the camera.
22 PRINTING STORED PICTURES PRINTING STORED PICTURES SELECTING PICTURES FOR PRINTING Y ou can select pictures for direct printing by a photo developing service center or on a direct print compatible printer . 1. Insert the SD card. 2. Slide the Function switch to (Playback mode).
23 PRINTING STORED PICTURES PRINTING PICTURES DIRECTL Y 1. Select the desired pictures (see ‘Selecting Pictures for Printing’ section). 2. T ake the SD card out of the camera. 3. Insert the SD card into the SD card slot of a direct printing compatible printer .
24 SOFTWARE INST ALLA TION (FOR WINDOWS USERS) SOFTW ARE INST ALLA TION (FOR WINDOWS USERS) Option Description Camera Drivers Enable the camera to become an external drive on your computer under Windows 98SE, and enables the PC-Cam function under any of required Windows systems.
25 SOFTWARE INST ALLA TION (FOR WINDOWS USERS) INST ALLING YOUR CAMERA DRIVER Note: T o avoid compatibility issues, we recommend users of Win98SE and Windows ME to upgrade their OS through microsoft’s website before installing the camera driver . Step 1 Make sure that your camera is not connected to the computer .
26 SOFTWARE INST ALLA TION (FOR WINDOWS USERS) Step 8 Click [Next] . Step 9 Click [Finish] . Step 10 T o ensure the complete installation and enable the camera to function well, please do select “ restart your computer ”.
27 SOFTWARE INST ALLA TION (FOR WINDOWS USERS) INST ALLING DIRECTX 9 Step 1 Make sure your camera is powered off and not connected to the computer . Step 2 Make sure the computer is powered on and Windows 2000 is running. Step 3 Close any other applications or software you may be running.
28 SOFTWARE INST ALLA TION (FOR WINDOWS USERS) Step 8 Click [Next >] . Step 9 Click [Finish] . Y our computer will automatically restart. INST ALLING ARCSOFT SOFW ARE Step 1 Make sure your camera is powered off and not connected to the computer . Step2 Make sure the computer is powered on and Windows is running.
29 SOFTWARE INST ALLA TION (FOR WINDOWS USERS) Step 6 The installation screen will appear , Click on Install ArcSoft Software . Step 7 Click [Next >] .
30 SOFTWARE INST ALLA TION (FOR WINDOWS USERS) Step 10 Make sure the two applications are checked and then click [Next >] . Step 1 1 Click [Next] . Step 12 The screen will show the status of the installation. Step 13 Click [Finish] . Win98SE will request for restart.
31 SOFTWARE INST ALLA TION (FOR WINDOWS USERS) INSA TLLING ADOBE ACROBA T READER (OPTIONAL) Step 1 Make sure your camera is powered off and not connected to the computer . Step 2 Make sure the computer is powered on and Windows is running. Step 3 Close any other applications or software you may be running.
32 SOFTWARE INST ALLA TION (FOR WINDOWS USERS) Step 7 “Recomposing data ...” status bar appear . Note for Win 98 SE users: As Adobe Reader 6 requires Internet Explorer 5.
33 SOFTWARE INST ALLA TION (FOR WINDOWS USERS) Step 9 Click [Next >] . Step 10 Click [Next >] . The files will be saved into C:Program FilesAdobeAcrobat 6.0 automatically . Y ou may change the default folder by clicking [Change Destination Folder .
34 DOWNLOADING PICTURES AND VIDEO CLIPS ONTO YOUR COMPUTER DOWNLOADING PICTURES AND VIDEO CLIPS ONT O YOUR COMPUTER PREP ARING TO DOWNLOAD FILES TO YOUR COMPUTER Note: For Win 98SE, you must install the driver before downloading files. 1. Slide the Function switch to (Playback mode).
35 DOWNLOADING PICTURES AND VIDEO CLIPS ONTO YOUR COMPUTER FOR MACINTOSH USERS 1. Connect the camera to the computer . • After a few moments, the external hard drive will appear on the desktop. 2. Double-click the “ Removable Disk ” removable drive that is on your desktop.
36 USING CONCORD 3047 AS A WEB CAMERA (FOR WINDOWS ONL Y) USING CONCORD 3047 AS A WEB CAMERA (FOR WINDOWS ONL Y) Note : Y ou must install the camera’s driver before using the web camera. 1. Slide the Function switch to (Capture mode). 2. Make sure that the camera is securely connected to your computer .
37 USING CONCORD 3047 AS A WEB CAMERA (FOR WINDOWS ONL Y) 4. Make sure the drive option is CD-ROM drive, then locate and double click Win98 folder , then click “ OK ” . 5. Click “ OK ” to continue and complete the installation. For Win 2000 1.
38 USING CONCORD 3047 AS A WEB CAMERA (FOR WINDOWS ONL Y) 2. The “ Hardware Installation” warning will appear , click “ Continue Anyway ” to proceed. Note: The message of “ Hardware Installation ” will occur 2 times successively , just click “ Continue Anyway ” to proceed.
39 UNPLUGGING YOUR CAMERA FROM THE COMPUTER UNPLUGGING YOUR CAMERA FROM THE COMPUTER Windows 98SE: Unplug the Mini-USB from the camera directly . Windows ME/2000/XP: 1. T urn the camera off. 2. Click once on the “Unplug or Eject Hardware” icon on the right hand side of your task bar .
40 CONNECTING THE CAMERA T O TV CONNECTING THE CAMERA T O TV SETTING TV MODE The camera allows you to view individual files and to take pictures or record clips on the television. T o begin, check your television documentation to determine the suitable type of TV broadcast standard: NTSC or PA L .
41 TROUBLE SHOOTING TROUBLE SHOOTING Problem Possible Cause Possible Solution The camera is not running. The power is not on. Press the Power button to turn the camera on. The batteries were not loaded properly . See “ Loading the Batteries ”. Batteries are depleted.
42 TROUBLE SHOOTING Cannot take a picture or a video clip when using an SD memory card. The SD card is locked or write protected. Remove the SD card from the card slot and slide the lock switch to off. Part of the picture/ video clip is missing. Something was blocking the lens when taking the picture.
43 SPECIFICA TION SPECIFICA TION Image Sensor CMOS Sensor (2048 x 1536 pixel), Sensor area 1 / 2 “ Lens Specification F 2.8, f = 8.8 mm(0.35 in.) Focus Range Normal: 1.
44 GETTING HELP GETTING HELP Y ou can get help from the troubleshooting section, F AQ or Customer Support on our website. T roubleshooting Section in this User’s Guide Please refer to the T roubleshooting section first, as it contains some of the most common problems that users encounter .
45 SAFETY TIPS AND MAINTENANCE SAFETY TIPS AND MAINTENANCE Cleaning the camera body Please use a soft dry cloth to clean the camera. Cleaning the lens and LCD 1. Blow of f dirt or dust with a blower or canned air . 2. Gently wipe the lens and/or LCD with a micro-fiber cloth.
46 SAFETY TIPS AND MAINTENANCE • Do not swallow batteries or small camera accessories. • Keep the camera away from water and other liquids, and never let it get wet. Do not use outdoors when it is raining or snowing. • Should any form of liquid enter the camera, do not use it.
47 SAFETY TIPS AND MAINTENANCE • Avoid heat, liquid and direct sunlight when using and for when storing. • Do not open the battery/card cover or remove the SD Memory Card while data is being read or written.
48 REGULA TOR Y INFORMA TION REGULA TOR Y INFORMA TION FCC INFORMA TION FCC W ARNING: This equipment meets the limits for a Class B digital device, pursuant to Part 15 of FCC rules.
Visit Concord on the Internet www .concord-camera.com Concord 3047 User ’s Guide Copyright 2005 Concord Camera Corp. V ersion 1.0 584690-00 R1.
Ein wichtiger Punkt beim Kauf des Geräts Concord Camera 3047 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Concord Camera 3047 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Concord Camera 3047 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Concord Camera 3047 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Concord Camera 3047 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Concord Camera 3047 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Concord Camera 3047 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Concord Camera 3047. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Concord Camera 3047 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
