Benutzeranleitung / Produktwartung C8CCTVKITP2TB des Produzenten Conceptronic
Zur Seite of 74
P1 User's inst allation and operatio n Manual Import ant Safeguards and W arding Do not plac e heavy object s on the DVR. Do not let any solid or liquid f all into or infiltrate the DVR Please brush printed circuit boards, connectors,fan s,machine box and so on regul arly .
P2 Director y 1 Productio n Introduction ........................................................................................................................................ 4 1.1 Product ov erview .................................................
P3 4.4.6 PTZ dev ice /RS485 dev ice ......................................................................................................... 44 4.4.7 T our ..............................................................................................
P4 1 Production I ntrod uction 1.1 Product overview The series DVR is desig ned specifically for security and defence fie ld which is an out stand ing digita l surveillance product. It introduces embedded LINUX operating sy stem which is m ore stable.
P5 · individual real-time video recording as well as s earching, play back, netw ork s urveillance, r ecording check, dow nloading and s o on · multi-playbac k mode · zoom at arbitrary region Net o.
P6 1. Front p anel and rear p anel The key function specifica tion in the front panel and the interface specification in the real panel are in the sp ecification. Please chec k the prod uct type in the front panel whether is acco rdant with the product ty pe you order .
P7 2. 3 Front p anel 2.5 Rear p anel The rear p anel of 4 /8 channel series 1. Video input (4chann el:Video1- 4,8channel:Vide o5- 8) 2. Audio output 3. VGA output 4. HDMI output 5. Audio input 6. Network port 7. USB port 8. RS485 port 9. Power input 2.
P8 low aberration and low interference. The image must be clear and has natur al color in the appropr iate brightness. Insure the cam era signal stable an d credible The camera should be inst alled i .
P9 2.6.4 Audio si gnal output Commonly the output par ameter of DVR audio signal is greater than 200mv 1KΩ( RCA ) which can connect the low impedance earphone and active sound box or other audio output equipment s throug h power amplifier . If the sound box and the tone arm can not be isolated, howling phenomena is ofte n existed.
P 10 shining and t he DVR is workin g normally . Note: 1. Ma ke sure that the i nput v oltage correspo nds with the sw itch of the D VR power supply . 2. Power ad apter supply de mands: 12 V± 10% . 3.1 T urn off There are t wo methods to turn off the DVR.
P 11 Picture 3.1 System Login Passwor d protectio n: If the pass word is continuous wr ong three times, the alarm will start. If the pass word is continu ou s wrong five times, the account will be locked. (Through rebo ot or af ter half an hour , the account w ill be u nlocked autom atically).
P 12 *comp are to analog/hybrid mode's shortcut menu,th e full digit al mode do not have color setting function. 3.5.1 M ain menu When you l ogin, the system main menu is show n as below . Picture3.3 M ain Menu 3.5.2 Play back There are t wo methods for you to play the v ideo files in the hard d isk.
P 13 Picture 3.4 video playback 1. Playbac k contro l 2. Process b ar 3. file searching 4. listed files 5. file in formation 【 Listed files 】 Look up the li sted f iles that accord w ith the searching cr iteria. 【 File in f ormat ion 】 Look up the fo und file informati on.
P 14 mouse to ex it. Note: Whe n current resolution of the channel is over M ax resolution, to playback this channel, will show a Red “X” . 3.5.3 Recor d Control Pl e as e ch e ck cu rr en t ch a nn el st at u s: “ ○ ” me an s i t i s no t in re co rd i ng s t a tu s , “● ” me an s i t i s in re c or di ng st at us .
P 15 3. The PTZ functions ar e decided by the P TZ protocols. Picture 3.10 PTZ setup 【 S peed 】 Set the P TZ rotation ran ge. Default r ange: 1 ~ 8. 【 Zoom 】 C lick / button to adjust the zoom multip le of the camera. 【 Focus 】 C lick / button to adjust the f ocus of the ca mera .
P 16 S tep 2: clic k the Preset butt on , then write the preset points in t he input blank, S tep 3: click Settings button, return the Picture 3.10 Complete setup, that is the preset points and preset positi on corresponds. Clear Preset ： Input preset points, click Remove but ton, remove the preset.
P 17 S tep1: In Picture 3.10, th e Direction key will turn PTZ to des ignated location , click Settings button to ent er Picture 3.13, S tep 2: c lick Cruise button s, t he write proper value into the.
P 18 Picture 3.14 Scan Setup 2 ） Scan Ca lls In Picture 3.10, click P age Shift button, then enter PTZ control menu as shown in Picture 3.12. Please inp ut the number of scan i n the value blank , then click Scan button ， PTZ begins to w ork on the scan lin e .
P 19 Picture 3.15 Boundary Sc an Setup 2 ） Boundary Scan Calls In Picture 3.10, click P age Shift button, then enter PTZ control menu as shown in Picture 3.12. Please inp ut the number of scan i n the value blank , then click Scan button ， PTZ begins to w ork on the scan lin e .
P 20 【 Intuitive Auxiliary Operation 】 choose auxiliary equipment , select Open or Close button, switch contro l ； 【 Auxiliary Number 】 The operation of corresponding auxiliary switch according to P TZ agreem ent ； 【 Page S hif t 】 In Picture 3.
P 21 Picture 3.19 Output Adjust Note: The black margin vertical & horizont al at ou tput adju st of hybrid mode is only effect to analog c hannel. 3.5.8 Logo ut Log out, shut down the system or reboot up. Y ou can use the desktop shortcut m enu or enter [main menu].
P 22 Note ： differe nt video input number have dif ferent switcha ble preview picture. 4 Main menu 4.1 Main menu navigation Main menu Sub menu Function Record Config Set the record ing configurat io.
P 23 Net Service PPPOE 、 NTP 、 Email 、 IP purview 、 DDNS para meter GUI display Set channel title, preview hint icon stat e, transparency , cover area, time title, cha nnel title fold . Note ： only analog channel can set channel name,regi on cover ,t ime title,channel title fold.
P 24 Import/Export Export the device's l og or configuration to external dev ice(like USB flash disk);Input the configuration with external dev ice(like USB flash disk).
P 25 【 Channe l 】 Choose the correspo nding channel number to set the channel. Choose the all option to set the entire channels. 【 Redunda ncy 】 Choose the redundancy functi on o ption to im pl ement the f ile double bac kup function. Double backup is writing t he video files in two hard disks.
P 26 Picture 4.2 Backup 【 Detect 】 Detect the storage connected with the DVR s uch as hard dis k or universal di sk. 【 Backup 】 Click backup button and t he dialog box is poppe d up. Y ou can choose the bac kup fil e according t o the type, channe l and time.
P 27 Backup format ： configurate t he backup file format ,according to requir e,can choose St art/paus e ： Click the play button to st art the backup and click the pause button to stop the backup. Note ： Dur ing backup you can exit the page layout to carry out other functions.
P 28 Pic 4.4 motio n detection 【 Channe l 】 Choose the set motion dete ct channel. 【 Enable 】 ■ means that the motion detect funct ion is on.
P 29 Picture 4.6 set the time section 【 Interval 】 Only one alarm signa l is turned on even there are sev eral motion detect signals in t he s et interval. 【 Alarm output 】 S tart the external eq uipment of corresponding linkage a larm when t he mot ion d etect alarm is turned on.
P 30 Picture 4.7 PTZ Activation under hy brid mode 【 Delay 】 W hen al arm is over ,recording w ill last some seco nds(10~300sec),t hen stop. 【 Show mess age 】 Pop the alar m information d ialog box in the loc al host comput er screen. 【 Send EM AIL 】 ■ means sending an email t o user when the al arm is turned on.
P 31 Pic 4.8 V ideo blind Set method: r efer to chapter 4.3.1. Motion detect 4.3.3 V ideo Loss When the equipment can not obta in the channel video signal, the video loss alarm is turned on and the linkage function is turned on.
P 32 Pic 4.9 V ideo loss Set method: r efer to chapter 4.3.1. Motion detect 4.3.4 Abnormal Analysing and inspect ing current so ftware and hardware of the dev ice: W hen some a bnormal ev ents happen,the dev ice will make a relative answer such as show mes sage and buzz er .
P 33 【 Event T ype 】 selecting abnormity you want to inspect 【 Enable 】 Sel ect it to make sure abnor mal function wor kable 【 Show mess age 】 Autom atica ll y alar m cue dialog box come out of t he main screen 【 Buzzer 】 D evice will hav e one long nos ie “di” while alarm is h appening 4.
P 34 ese,S -Chinese,T urkish,Brazilian,Bulgarian,Farsi, French,German,Hebrew,Hungarian,Polish,Romanian,Spani sh,Swedish,Vietnamese 【 HDD full 】 Choose stop record: S top record ing when the hard d isk is full. Choose overwrite: Cover the earliest recording files and continue rec ording when the hard disk is full.
P 35 playback simult aneously , Dial-up multi-channe l real-tim e m onitor under poor bandwid th, or mobil e monitor and so on. Picture 4.20 Encode setup Independent channel code set ting 【 Channe l 】 Choose the channel nu mber . 【 Compressi on 】 S tand ard H.
P 36 【 Channel title 】 select channel title and then to choose whether need enable video & audio. The resolution, frame rate, bit r ate type settings is t he same as main stream. 4.4.3 Networ k setup Picture4.21 Network 【 Net Card 】 Y ou ca n choose cable net work card or w ireless network card.
P 37 valid only when the assist ant code stream is turned on. O therwise image qua lity precedence is v alid. 4.4.4 NetServ ice Choose the network service option and click the set button to configure the advanced network function s or double c li ck th e service button to configure the p arameters.
P 38 【 NTP setup 】 Picture 4.24 NTP The NTP server must be installe d in the PC. Enable ： R everse■mean choose ， setting can be come eff ective. Host com puter IP: Input the I P address inst alled N TP serv er . Port: Defau lt: 123. Y ou ca n set the port according t o NTP s erver .
P 39 Picture 4.25 EMAIL SMTP server: Email serv er address. It could be an IP address or domain name. Domain name can be translated only it is the corr ect DNS configurati on. Port: Email serv er port numb er . SSL: Decide w hether usin g Secure Socket Lay er protocol to l ogin.
P 40 Picture 4.26 IP FIL TER 【 DDNS 】 Picture 4.27 DDNS setu p It is the abbreviation of dy namic domain na me server . Local dom ain name ： Prov ide the domain na me registered by DDNS. User nam e ： Provide the accou nt registered by DDNS. Passwor d ： Prov ide the password registered by DDNS.
P 41 Picture 4.28 FTP setu p 【 Enable 】 C lick Enable,t hen all settings wi ll be av ailable 【 Server I P 】 IP address for FTP server 【 Port 】 Do m ain Port of FT P,default 21 【 User Na .
P 42 【 UPNP 】 UPNP protocol is to realiz e auto port forwarding on router , precondition of using this function is to make sure th e UPNP function of router is enabled.
P 43 4.4.5 GUI Di splay Configure the video outpu t parameters i ncluding the front output mode and encode o utput mode. Front output ： I n the local preview m ode include: channel title, time display , channel display , record status, alarm stat us, transparen cy and region cov er .
P 44 【 Channe l 】 Choose the set code outp ut channel numb er . 【 Region C over 】 means the selective state. Click th e cov er area button and enter the corre sponding channel w indow .
P 45 4.38 RS485 dev ice 【 Protocol 】 c hoose related protocol of brand model ； 【 Address 】 s et with corre sponding address, de fault is 1 ； 【 Baud rate 】 choose bar d rate that relate.
P 46 【 interval 】 Set the patro l switch interval. The set range is 5-120 seconds. 【 alarm tour 】 set the interval t o shift alarm tour , range is 5-120 se conds, choose return when alarm ends, when a larm link to t our , syst em will auto sh ift to six-view after alar m finished.
P 47 Digital channel: Single lin k p age of digit al channel Multi-lin k age pa ge of Digit al channel Pic 4.43 digit al channel interface 【 Channel 】 select channel title 【 Enable 】 O pen dig.
P 48 Pic 4.44 re mote channel conf igure page 【 Configure Name 】 device is with default con figure title, user ca n revise it if n ecessary ； 【 Device T ype 】 3 types: IPC 、 DVR 、 HVR .
P 49 Channel Stat us: channel status is to show the status of all the digital channel W hen there is w hat existing, status including Max Resolution, This Reso lution, Connection S tatus.
P 50 Remark: when the curre nt resolution is over the max resoluti on that the channel support ed, then a red “X” will be shown on the prev iew image, for example : Under full digit al chan nel mo.
P 51 4.5 A dvanced Manage tool s menu includ ing: HDD manag e, account m anage, online user , output adjust, auto maint ain, upgrade. 4.5.1 HDD Manage Configure and manage the hard disk. The menu displays current hard disk information: hard disk number , input port, type, status and overall capa bility .
P 52 2. There is no limit in the user and user group. You can add or delete the user group accord ing to user definition. The factor y setup include: useradmin. Y ou can set the team as you wish. The user can appoint the purview in t he group. 3. The user management include: group/ user .
P 53 【 Add user 】 Add a user in the group and set the user purview . Enter the menu interface and input the user name and p assword. Choos e the tea m and choo se whether c over using the user . Cover usin g means that t he account can be used by multip le users at t he same time.
P 54 【 Delete Us er 】 Delete th e current user . Choose t he user and click de l ete us er button. 【 Delete G roup 】 Delete the curr ent group.
P 55 4.5.4 Output a djust Refer to chapter 3.5.7 . 4.5.5 Auto M aint ain The user can set the time to auto reboot and auto delete file. Picture 4.39 Auto maint ain 4.5.6 Restore The syste m restore to the default . Y ou can choose the items a ccording to t he menu.
P 56 4.5.7 Upgra de Pic 4.55 Upgrade 【 Upgrade 】 choos e USB interface. 【 Upgrade f ile 】 choose the u pgrade file. 4.5.8 Device Info Provide dev ice interface info like audio in,alar m in/out to be conv eniently used for user . Pic 4.56 device inf o 4.
P 57 4.57 Import / Export interface 4.6 Info Display the hard disk infor m ation, i ncluding HDD info, code strea m stat istic, log in fo, version info 4.6.1 HDD inf o Display the hard disk state: hard disk type, overall capabi li ty , residual capab ility , the recording time and so on.
P 58 Ti ps ： ○ means that the hard disk is n ormal. X m eans that the hard di sk is broken -down.- means that there is no hard disk. If the user need to change th e damaged hard disk, you must shut down the DV R and ta ke up all the damag ed hard disks,t hen install a new one.
P 59 Pic: 4.60 Log i nformation 4.6.4 V ersion Display the basic information such as hardware information, sof tware version, issue date, serial number , N A T st atus and so on. Pic 4.61 v ersion informat ion 4.7 Shut down system Refer to cha pter 3.
P 60 Chapter 5: Clo ud Technology Basic Operation 5.1 Cloud tec hnology monitor Cloud techno logy make the device one step on n et, greatly bring c onvenience for cust omer to monitor via w ide area network, this technology is using the seria l no to visit de vice.
P 61 Log in by user Customer use their registered user name and p assword t o log in, will see be low interface Pic 5.3 clo ud technology operat ion interface Device ma nage Mainly use to add device, clic k “add”to add the ser ial number o f device to be monitore d.
P 62 Pic 5.4 dev ice manage int erface Pic 5.5 add i nterface at dev ice manage *Remark ： in pic 5.5, the user n ame means the u ser name of monit ored dev ice, pass word means the pass word of related u ser . My Device Mainly show all the added device here, click th e on-line device name, can access to control this device accord ingly .
P 63 Pic 5.6 monit or page - lo g in by user *Remark ： th e icon of“ ” means offl ine, the devi ce do not connect to server suc cessfully . Log in by device Pic 5.7 inter face of log in by device Input the seria l number of dev ice and the verify code to monitor and c ontrol the dev ice directly .
P 64 Pic: 5.8 m onitor pa ge - log in by device.
P 65 6 FAQ and maintenance 6.1 F AQ If the problems are not l isted, please contact the local service or call th e HQ service. We are willing to of fer the service. 1 、 The DVR c an not boot u p normally . Possible rea sons are as followed: 1 The power supply is not c orrect.
P 66 4 、 There are n o video output s in sin gle channel, m ultiple channel s and all chann els. Possible rea sons are as followed: 1 The progra m is not matched. Please update t he program. 2 The image brightness is al l 0. Please restore the default setu p.
P 67 Possible rea sons are as followed: 1 It is not an active tone arm. 2 It is not an active sound b ox. 3 The audio l ines are damaged. 4 The hardware of the DVR is da maged. 9 、 There is audio signal in the survei llance w indow but mo audio signal in the playback st ate.
P 68 2 The motion d etect area set is not correct. 3 The sens itivity is too low . 4 Limited by some hardware edition. 13 、 I can not lo gin via web o r CMS. Possible rea sons are as followed: 1 The system is windows 98 or win me. We recom mend updat ing to windows 2000sp4 or higher V ersion or installing the software for low edition.
P 69 1 The rewrit able machine and the hard d isk are shared the same data lines. 2 The dat a is too much. P lease stop recordi ng and backup. 3 The dat a exceeds the bac kup storage. 4 The bac k up equip ment is not co mpatible. 5 The bac k up equip ment is damaged.
P 70 21 、 The stora ge time is not enough. Possible rea sons are as followed: 1 Front camer a quality is bad. The lens is too dirty . The camera is i n bac klighting inst allation. 2 The hard di sk capability is not enough. 3 The hard di sk is damaged.
P 71 26 、 The sna psh ot at alarm functi on was enabl e, why not catch pict ure Possible rea sons are as followed: 1 HDD manage without partition for snaps hot. 2 Partition for snaps hot is 0 3 The snapshot function is not ena ble on record-> storag e of related chan nel.
P 72 Appendix 1.Remote co ntroller opera tion （ Optional ） Serial number Name Function 1 Multi-window button Same function as Mul ti -window button in the front panel 2 Numeric but ton Code input/.
P 73 Appendix 2.Mouse o peration （ optional ） *T ake right hand as an example The mouse i n USB conne ction is supported. Operation Function Do uble left click Double clic k one ite m in the file .
P 74 Appendix 3.Har d disk capability calcula tion Make sure the hard disk installe d to the DVR for the first time. Pay attention to the IDE hard di sk lines conne ction. 1 、 Hard disk c apability There is no limit for r ecording machine. We r ecommend 120G~250G size to keep bet ter stabil ity .
Ein wichtiger Punkt beim Kauf des Geräts Conceptronic C8CCTVKITP2TB (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Conceptronic C8CCTVKITP2TB noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Conceptronic C8CCTVKITP2TB - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Conceptronic C8CCTVKITP2TB reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Conceptronic C8CCTVKITP2TB erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Conceptronic C8CCTVKITP2TB besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Conceptronic C8CCTVKITP2TB verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Conceptronic C8CCTVKITP2TB. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Conceptronic C8CCTVKITP2TB gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
