Benutzeranleitung / Produktwartung 340622-002 des Produzenten Compaq
Zur Seite of 79
SLR Tape Drive User Guide Second Edition ( January 1998) Part Number 340622-002 Compaq Computer Corporation.
Notice The information in this publication is subject to change without notice. COMPAQ COMPUTER CORPORATION SHALL NOT BE LIABLE FOR TECHNICAL OR EDITORIAL ERRORS OR OMISSIONS CONTAINED HEREIN, NOR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE FURNISHING, PERFORMANCE, OR USE OF THIS MATERIAL.
iii Compaq SLR Tape Drive User Guide Contents About This Guide Text Conventions .................................................................................................................vi i Symbols in Text .....................................
iv Compaq SLR Tape Drive User Guide Chapter 3 Installing the Software Drivers Obtaining the Drivers ......................................................................................................... 3 -1 Novell IntranetWare/NetWare ............
v Compaq SLR Tape Drive User Guide Troubleshooting continued Checking Software ............................................................................................................. 5-7 Sense Codes ..............................................
vi Compaq SLR Tape Drive User Guide Appendix C Drive Configuration Options Locating the Jumper Block ................................................................................................. C-1 Identifying the Jumpers ........................
vii About This Guide Compaq SLR Tape Drive User Guide About This Guide This guide is designed to be used as step-by-step instructions for installation, and as a reference for operation, troubleshooting, and future upgrades. Text Conventions This document uses the following conventions to distinguish elements of text: Keys Keys appear in boldface.
viii About This Guide Compaq SLR Tape Drive User Guide Symbols in Text These symbols may be found in the text of this guide. They have the following meanings. ! WARNING: Indicates that failure to follow directions in the warning could result in bodily harm or loss of life.
ix About This Guide Compaq SLR Tape Drive User Guide Telephone Numbers For the name of your nearest Compaq Authorized Reseller: In the United States, call 1-800-345-1518 In Canada, call 1-800-263-5868.
1-1 Overview Compaq SLR Tape Drive User Guide Chapter 1 Overview This chapter provides information on: ■ The capacity of the drive ■ Drive performance ■ Data compression ■ Cartridge Specificat.
1-2 Overview Compaq SLR Tape Drive User Guide Cartridge Specifications, Compatibility, and Formats IMPORTANT: We recommend that you use only tapes purchased from vendors that have been qualified by Compaq. The qualified vendors are Sony and Imation. The drive supports the standard QIC formats listed in the following table .
1-3 Overview Compaq SLR Tape Drive User Guide Kit Contents This kit contains the following items: ■ A Compaq SLR Drive with rails installed ■ Additional mounting screws ■ A data cartridge ■ A .
2-1 Drive Installation Compaq SLR Tape Drive User Guide Chapter 2 Drive Installation This chapter provides instructions for installing the drive in: ■ The removable media bay of a workstation or ser.
2-2 Drive Installation Compaq SLR Tape Drive User Guide Preparing the System To prepare your system prior to the installation: 1. Perform a normal system shutdown. 2. Turn OFF the system. 3. Turn OFF all external peripheral devices attached to the system.
2-3 Drive Installation Compaq SLR Tape Drive User Guide Locating the Jumper Block Locate the jumper block at the rear of the drive. P o wer Connector Jumper Bloc k SCSI Connector Figure 2-1. The Rear of the Compaq SLR Drive Selecting the SCSI ID SCSI ID Jumper s SEL0 SEL1 SEL2 Figure 2-2.
2-4 Drive Installation Compaq SLR Tape Drive User Guide IMPORTANT: Do not use SCSI ID = 7. This is reserved for SCSI controllers. Table 2-1 Selecting the SCSI ID SEL2 SEL1 SEL0 SCSI ID OPEN OPEN OPEN .
2-5 Drive Installation Compaq SLR Tape Drive User Guide WARNING: Some Compaq servers are capable of producing energy levels that are considered hazardous. To reduce the risk of personal injury: ■ Do not attempt to defeat the safety interlocks that prevent access to hazardous energy.
2-6 Drive Installation Compaq SLR Tape Drive User Guide Installing the Drive With Rails Figure 2-3. Typical Media Bay - Rails Required 1. Obtain access to the removable media bay. 2. Install the drive. 3. Secure the drive. (The screws supplied with this kit may be used.
2-7 Drive Installation Compaq SLR Tape Drive User Guide Figure 2-4. Installing Power and SCSI Cables IMPORTANT: If available, use the last connector on the power cable. Since the drive’s power receptacle is recessed, you will require an extender cable to use an intermediate power cable connector.
2-8 Drive Installation Compaq SLR Tape Drive User Guide 1. Obtain access to the removable media bay. 2. Remove the rails from the drive. 3. Slide the drive into the bay. 4. Secure the drive to the bay. 5. Connect a power cable and a SCSI signal cable to the drive.
2-9 Drive Installation Compaq SLR Tape Drive User Guide Reassembling the System Reassemble the system by reversing the steps of the procedure for “Preparing the System.” Completing the Installation To complete the installation of the drive: 1. Install the appropriate software.
3-1 Installing the Software Drivers Compaq SLR Tape Drive User Guide Chapter 3 Installing the Software Drivers This chapter contains guidelines for installing software drivers and includes information.
3-2 Installing the Software Drivers Compaq SLR Tape Drive User Guide If the appropriate drivers are not inherent to your operating system, you can obtain them from one of the following sources: ■ The SmartStart and Support Software CD supplied with your system ■ The QuickFind database ■ Compaq’s web site on the Internet: http:www.
3-3 Installing the Software Drivers Compaq SLR Tape Drive User Guide Novell IntranetWare/NetWare The following table provides information on identifying appropriate drivers for Compaq SCSI controllers.
3-4 Installing the Software Drivers Compaq SLR Tape Drive User Guide ASPI Support Certain applications require the use of the Advanced SCSI Programming Interface (ASPI). The information supplied with your application will specify whether or not ASPI support is required.
3-5 Installing the Software Drivers Compaq SLR Tape Drive User Guide Application and Driver Level Device Hardware Level SCSI Controllers Compaq ASPI Support Any ASPI Compliant Application Cheyenne ARCserve Seagate Backup Exec (Tape Backup Applications) CPQSASPI.
3-6 Installing the Software Drivers Compaq SLR Tape Drive User Guide Microsoft Windows NT The following table provides information on identifying appropriate drivers for Compaq SCSI controllers: Table.
3-7 Installing the Software Drivers Compaq SLR Tape Drive User Guide Microsoft Windows 95 The following table provides information on identifying appropriate drivers for Compaq SCSI controllers: Table.
3-8 Installing the Software Drivers Compaq SLR Tape Drive User Guide SCO OpenServer The drivers required to support the Compaq SLR Drive under SCO UNIX are: ■ The SCO SCSI tape driver stp which is b.
3-9 Installing the Software Drivers Compaq SLR Tape Drive User Guide SCO UnixWare The following table provides information on identifying appropriate drivers for Compaq SCSI controllers: Table 3-5 SCO.
3-10 Installing the Software Drivers Compaq SLR Tape Drive User Guide IBM OS/2 The following table provides information on identifying appropriate drivers for Compaq SCSI controllers: Table 3-6 IBM OS.
3-11 Installing the Software Drivers Compaq SLR Tape Drive User Guide SunSoft Solaris The following table provides information on identifying appropriate drivers for Compaq SCSI controllers: Table 3-7.
3-12 Installing the Software Drivers Compaq SLR Tape Drive User Guide Banyan VINES The following table provides information on identifying appropriate drivers for Compaq SCSI controllers: Table 3-8 Ba.
4-1 Operating and Cleaning the Drive Compaq SLR Tape Drive User Guide Chapter 4 Operating and Cleaning the Drive This chapter contains guidelines for operating and cleaning the Compaq SLR Drive and in.
4-2 Operating and Cleaning the Drive Compaq SLR Tape Drive User Guide Operation Front Panel Indicators LED Indicator Car tridge Ejector Figure 4-1. The Front Panel of the Compaq SLR Drive There is a front panel LED display featuring green, amber, and red LEDs which may be OFF, STEADY ON, or BLINKING ON.
4-3 Operating and Cleaning the Drive Compaq SLR Tape Drive User Guide Meaning of Front Panel LED Display continued LED Display Meaning STEADY AMBER A media or hardware error has occurred.
4-4 Operating and Cleaning the Drive Compaq SLR Tape Drive User Guide Handling and Storing a Cartridge Data reliability is a function of many variables and may be improved by suitable handling and storage. The user should follow these guidelines: ■ Do not drop cartridges.
4-5 Operating and Cleaning the Drive Compaq SLR Tape Drive User Guide Loading and Unloading a Cartridge Figure 4-2. Loading a Cartridge To load a cartridge: 1. Press the cartridge ejector button to open the front of the drive. 2. Insert the cartridge.
4-6 Operating and Cleaning the Drive Compaq SLR Tape Drive User Guide Retensioning a Cartridge IMPORTANT: Use your software application to retension a cartridge.
4-7 Operating and Cleaning the Drive Compaq SLR Tape Drive User Guide Using the Cartridge’s Write Protect Switch Figure 4-3. The Write Protect Switch Enabling Data Compression Use your application software to enable or disable data compression.
4-8 Operating and Cleaning the Drive Compaq SLR Tape Drive User Guide 3. Manually unload the cleaning cartridge. 4. Record the cleaning date on the cartridge’s label.
5-1 Troubleshooting Compaq SLR Tape Drive User Guide Chapter 5 Troubleshooting This chapter provides guidelines for troubleshooting your Compaq SLR Drive and includes information on the following topi.
5-2 Troubleshooting Compaq SLR Tape Drive User Guide Quick Checklist Listed below are some checks that can be used to identify problems associated with your drive.
5-3 Troubleshooting Compaq SLR Tape Drive User Guide Problem occurs Drive Installed successfully LED display illuminated with cartridge loaded Problem intermittent See "CHECKING FOR INTERMITTENT .
5-4 Troubleshooting Compaq SLR Tape Drive User Guide Checking for Resource Conflicts Many of the problems that occur during installation are the result of resource conflicts between the drive, the controller, and the other devices in your system. Complete the System Configuration Worksheet to identify then correct resource conflicts.
5-5 Troubleshooting Compaq SLR Tape Drive User Guide Table 5-1 System Configuration Worksheet Item Notes Operating System Operating System Version Software Available Base Memory Tape Software Vendor T.
5-6 Troubleshooting Compaq SLR Tape Drive User Guide Checking Power to the Drive If the tape drive is not operational, make sure that power is connected to the drive. 1. Turn on your system and insert a tape cartridge. 2. If the front panel LED display is not illuminated: a.
5-7 Troubleshooting Compaq SLR Tape Drive User Guide 6. Examine the list of installed devices. If the tape drive is not shown, try the following: a. Check the SCSI cable connections. b . Check the seating of the controller. c. If multiple tape drives are used, ensure that each tape drive has a unique SCSI ID.
5-8 Troubleshooting Compaq SLR Tape Drive User Guide Troubleshooting in Microsoft Windows NT This section applies to applications such as Arcada Backup Exec for NT, SQLServer for NT, and NT Backup run.
5-9 Troubleshooting Compaq SLR Tape Drive User Guide The following are examples of Stop messages: ■ ‘The tape device reported an error on a request to read data from tape. Error reported: Bad data.’ ■ ‘Tape device “Archive 1” reported an error on a request to write data to tape.
5-10 Troubleshooting Compaq SLR Tape Drive User Guide NOTE: The device selected in the above Event Viewer display is a DAT drive: make sure that you select the 4/8 GB SLR Drive. 5. Switch the Data buttons from Bytes to Words to make the display easier to read.
5-11 Troubleshooting Compaq SLR Tape Drive User Guide If you wish to save the System Event Log, use the following procedure: 1. Select the Log drop-down menu from the Event Viewer. 2. Select System. 3. Select Save As from the Log drop-down menu. 4. Enter a filename with a .
5-12 Troubleshooting Compaq SLR Tape Drive User Guide Troubleshooting in SCO OpenServer Verify that the tape driver is configured in the kernel: 1. Determine if the driver is installed or identify the current tape parameters using one of these methods: ❏ Use the Hwconfig command ❏ View the / USR/ADM/MESSAGES file 2.
5-13 Troubleshooting Compaq SLR Tape Drive User Guide Troubleshooting in Banyan VINES Backup jobs in Banyan can be configured by the user to report error information to the System Log. NOTE: Banyan reports sense codes in decimal rather than hexadecimal.
5-14 Troubleshooting Compaq SLR Tape Drive User Guide a. highlighting System Log, and b . pressing Enter 4. Press F10 . 5. Enter the beginning and ending dates for the period you wish to examine. 6. Press Enter to omit the consistency check. 7. Specify whether you wish to display or save the System Log.
5-15 Troubleshooting Compaq SLR Tape Drive User Guide Follow this procedure to view information in the Activity Log and the Tape Engine Log: 1. Launch the ArcServe Server Admin utility. 2. Select the Manager icon. 3. Select Quick Status. 4. Select the appropriate tab to display either the Activity Log or the Tape Engine Log.
5-16 Troubleshooting Compaq SLR Tape Drive User Guide SPE CIFIC SENS E CODE 03 31 00 Figure 5-6. A typical Tape Engine Log display IMPORTANT: While troubleshooting a problem the user should review these logs regularly. Delete or archive older information to keep the size of the logs manageable.
5-17 Troubleshooting Compaq SLR Tape Drive User Guide Troubleshooting with ArcServe for NetWare ArcServe for Novell NetWare records useful information in these logs: Table 5-3 ArcServe for NetWare Logs Name of Log Contents Activity Log (ARCH$SVR.LOG) This reports whether or not a backup has been performed successfully.
5-18 Troubleshooting Compaq SLR Tape Drive User Guide GENERIC ER ROR REPORT Figure 5-7. A typical Activity Log display Error messages in the Activity Log are in two parts, for example: E1014 Failed to.
5-19 Troubleshooting Compaq SLR Tape Drive User Guide SPE CIFI C SE NSE CODE 04 44 A F Figure 5-8. A typical Tape Server log display Verifying Recent Changes If the drive was installed correctly but a problem has since occurred, verify any recent changes to the system to ensure that these changes are not causing the problem.
5-20 Troubleshooting Compaq SLR Tape Drive User Guide Correcting Intermittent Failures If the drive fails intermittently: 1. Clean the drive. 2. Run the Compaq Diagnostics Utility and the tape drive Diagnostics Utility. 3. If a drive operation begins correctly but then stops with an error: a.
5-21 Troubleshooting Compaq SLR Tape Drive User Guide Upgrading the Firmware Compaq occasionally releases upgraded firmware to correct specific problems so you should make sure that your drive’s firmware is the latest revision. To identify the revision level of your current firmware, follow this procedure: 1.
5-22 Troubleshooting Compaq SLR Tape Drive User Guide To upgrade your firmware with a cartridge, follow this procedure: 1. Exit all applications before proceeding. 2. Verify that the drive is not in use. 3. Insert the cartridge into the drive. 4. The upgrade process automatically takes place; the front panel LED display shows steady green.
5-23 Troubleshooting Compaq SLR Tape Drive User Guide Creating a ROMPaq diskette To create the diskette, follow this procedure: 1. Boot your system from the Compaq SmartStart and Support Software CD version 3.10 or higher. 2. Select Create Support Software from the Compaq System Utilities screen.
5-24 Troubleshooting Compaq SLR Tape Drive User Guide 6. If appropriate, select Enter from the Select an Image screen. 7. Review the Caution screen: Table 5-5 Caution screen Item Contents Device to re.
A-1 Regulatory Compliance Notices Compaq SLR Tape Drive User Guide Appendix A Regulatory Compliance Notices Federal Communications Commission Notice Part 15 of the Federal Communications Commission (FCC) Rules and Regulations has established Radio Frequency (RF) emission limits to provide an interference-free radio frequency spectrum.
A-2 Regulatory Compliance Notices Compaq SLR Tape Drive User Guide Class B Equipment This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
A-3 Regulatory Compliance Notices Compaq SLR Tape Drive User Guide Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Compaq Computer Corporation may void the user's authority to operate the equipment.
A-4 Regulatory Compliance Notices Compaq SLR Tape Drive User Guide ■ EN60950 (IEC950) - Product Safety Japanese Notice Australian Notice This customer equipment is to be installed and maintained by service personnel as defined by AS/NZS 3260 Clause 1.
B-1 Electrostatic Compaq SLR Tape Drive User Guide Appendix B Electrostatic Discharge To prevent damaging the system, be aware of the precautions you need to follow when setting up the system or handling parts. A discharge of static electricity from a finger or other conductor may damage system boards or other static-sensitive devices.
B-2 Electrostatic Compaq SLR Tape Drive User Guide ■ Use a portable field service kit with a folding static-dissipating work mat. If you do not have any of the suggested equipment for proper grounding, have an Authorized Compaq Reseller install the part.
C-1 Drive Configuration Options Compaq SLR Tape Drive User Guide Appendix C Drive Configuration Options Your Compaq SLR SLR Drive has been configured by Compaq to meet the requirements of the typical user. This chapter contains information on changing the default configuration.
C-2 Drive Configuration Options Compaq SLR Tape Drive User Guide Identifying the Jumpers The layout of the jumper block is as follows: OUT TEST IN TEST CONN TPWR P ARITY SELECT 0 1 2 Figure C-2 .
C-3 Drive Configuration Options Compaq SLR Tape Drive User Guide Selecting the SCSI ID Since each device on the same SCSI bus must have a unique ID, the user may need to set the drive’s ID before installation. IMPORTANT: The drive has been configured by Compaq with SCSI ID = 6 selected.
C-4 Drive Configuration Options Compaq SLR Tape Drive User Guide Configuring the SCSI ID in a SCO OpenServer environment In the pre-configured kernel used to install SCO OpenServer, the following SCSI IDs are automatically set: ■ Disk = 0 ■ Tape = 2 ■ CD-ROM = 5.
I ndex -1 Compaq SLR Tape Drive User Guide Index A About This Guide vii Activity Log 5-15, 5-17 Arcada Backup Exec for NT, troubleshooting 5-8 ArcServe for Netware, troubleshooting 5-17 ArcServe for N.
I ndex -2 Compaq SLR Tape Drive User Guide Formats 1-2 Supported QIC formats 1-2 G Getting Help viii Grounding Methods B-1 H http://www.compaq.com viii, 5-24 I IBM OS/2 Identifying software drivers 3-.
I ndex -3 Compaq SLR Tape Drive User Guide P Parity checking C-4 Performance 1-1 Power cable extender, installing 2-8 Q Quick Checklist 5-2 R Reliability of data 4-4 Removable media bay No rails requi.
I ndex -4 Compaq SLR Tape Drive User Guide Arcada Backup Exec for NT 5- 8 ArcServe for Netware 5-17 ArcServe for NT 5-14 Banyan VINES environment 5- 13 Checking for resource conflicts 5-4 Checking pow.
Ein wichtiger Punkt beim Kauf des Geräts Compaq 340622-002 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Compaq 340622-002 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Compaq 340622-002 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Compaq 340622-002 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Compaq 340622-002 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Compaq 340622-002 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Compaq 340622-002 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Compaq 340622-002. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Compaq 340622-002 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
