Benutzeranleitung / Produktwartung Mini-ITX Motherboard LV-671 des Produzenten Commell
Zur Seite of 58
L V -671 Mini-ITX Motherboard User ’ s Manual Edition: 1.42 2007/1 1/19.
L V -671 User ’ s Manual 2.
L V -671 User ’ s Man ual 3.
L V -671 User ’ s Manual 4 Copyright Copyright © 2003 - 200 4. All rights reserved. This document is copyrighted and all rights are reserved. The information in this docum ent is subject to change w ithout prior notice to make improvements to the products.
L V -671 User ’ s Man ual 5 Packing List Please check the package before y ou use this product Hardware: L V -671 Mini-ITX motherboard x 1 Cable Kit: 40-pin A T A 100 IDE Cable x 1 26-pin Slim T y p.
L V -671 User ’ s Man ual Index 6 Index Chapter 1 <Int roduction> ..................................................................................... 9 1.1 <Product Overview> ............................................................
L V -671 User ’ s Man ual Index 7 Chapter 3 <Sy s tem Set up> ................................................................................ 37 3.1 <W atchdog T imer Setti ng> ...........................................................
L V -671 User ’ s Man ual 8 (This Page is Lef t for Blank).
L V -671 User ’ s Manual Introduction Product Ov erv iew 9 Chapter 1 <Introduction> 1.1 <Product Overview> LV-671 is an all-in-one industrial compact Pentium-M level mot herboard based on Mini-ITX form factor at 170 x 170 mm of dimension.
L V -671 User ’ s Man ual 10 1.2 <Product S pecification> General S pecification Form Factor Mini-ITX motherboard at 170 x 170 mm (L x W) CPU Package: 478 pin PGA/ 479 pin BGA L2 Cache: 512KB/.
L V -671 User ’ s Manual Introduction Product S pecification 1 1 Frame Buffer Intel DVMT (Dynamic Video Memory Technology) 2.0 up to 64Mbytes shared w ith system* Display Type CRT and LCD monitors f.
L V -671 User ’ s Man ual Product S pecification 12 Pow er and Env ironment Pow er Requirement One external 19V/12V (auto sw itching) DC Adapter connector on rear panel 4-pin onboard 12V P4 4-pin po.
L V -671 User ’ s Manual Introduction Component Placement 13 1.3 <Component Placement> 1 x 184-pin DDR266/333 DIMM up to 1GB Intel 855GME (Northbridge) Socket479 For 478-pin PGA Pentium M/Celeron M Onboard DC to DC inverter Intel ICH4 (Southbridge) Intel 82540EM Gigabit LA N REA L TEK A LC655 5.
L V -671 User ’ s Man ual Block Diagram 14 1.4 <Block Diagram> Intel Pentium M processor w ith FC-PGA2/FC-BG A 2 855GME CRT LCD LV D S 400MHz/533MHz FSB 1 x 184-pin DIMM Up to 1GB DDR266/333 ICH4 A T A PI Devices USB Devices UltraA T A 100 USB2.
L V -671 User ’ s Manu al Hardw are Setup Connector Location 15 Chapter 2 <Hardware Setup> This chapter contains the infor mation for inst allation of hard ware. The install procedure includes jumper settings, CPU and memory installation, fan, I/O and panel connections.
L V -671 User ’ s Manu al Hardw are Setup Jumper Reference 16 2.2 <Jumper Reference> Jumper Function JRTC COMS Operate / Clear Setting JLAN LAN1 Enable/Disable JVLCD LCD Panel Voltage Setting .
L V -671 User ’ s Manu al Hardw are Setup Connector Referen ce 17 2.3 <Connector Reference> 2.3.1 <Internal Connector> Connector Function Remark CPU MicroPGA479 CPU Socket Standard DIMM .
L V -671 User ’ s Manu al Hardw are Setup CPU Inst allation 18 2.4 <System Setup> 2.4.1 <CPU Inst allation> The board sup port s Intel P entium M/ Celeron M processor with 4 00MHz/533MHz.
L V -671 User ’ s Manu al Hardw are Setup Memory Inst allation 19 2.4.2 <Memory Inst allation> The board s upports one 184-pin DDR 266/333 (PC2100/P C2700) SDRAM up to 1GB of capacity , and supports ECC (Error Correcting Code), unbuf ferred memory modules.
L V -671 User ’ s Manu al Hardw are Setup CPU Cooler Inst allation 20 2.4.3 <CPU Cooler Inst allation> The board accessori es come with one CPU cooler , the cooler ’ s specification is listed below , please check the installation step s before you start.
L V -671 User ’ s Manu al Hardw are Setup CMOS Setup 21 2.5 <CMOS Setup> The board’s data of CMOS can be setting in BIOS. If the board refuses to boot due to inappropriate CMOS setting s, here is how to proceed to clear (reset) the CMOS to its default values.
L V -671 User ’ s Manu al Hardw are Setup IDE Interface 22 2.6 <IDE Interface> The board supports two IDE interface up to 4 A T API devices, base on Intel ICH4, the ID E interface supports A T A66/100 A T API drives. The IDE1 supports +5V on pin-20 for DOM (Disk on Module), the jumper JDOM can let you select enable/disable this support.
L V -671 User ’ s Manu al Hardw are Setup Compact Flash Interface 23 2.7 Comp act Flash Interface The board supports Compact Flash T ype I socket for storage flash disk only , the jumper JCFSEL can let you to setup the flash card operate on secondary mast er or slave mode.
L V -671 User ’ s Manu al Hardw are Setup Display Interface 24 2.8 <Display Interface> 2.8.1 <Analog display interface> The board is integrated with Intel 855G M GMCH chipset built-in Intel Extreme Graphics 2 with 266 MHz VGA core, 25 6-bit 3D engine and Intel Dynami c Video Memory up to 64MBytes shared with system memory.
L V -671 User ’ s Manu al Hardw are Setup Display Interface 25 Connector: CN_INV Connector: JVLCD Type: 5-pin LVDS Pow er Header Type: 3-pin Pow er select Header Pin Description Pin Description 1 +1.
L V -671 User ’ s Manu al Hardw are Setup Display Interface 26 LCD installing guide: 1. Prepare a panel, inverter and LV-671 . 2. Please check the datasheet o f the panel to see the voltage of the panel, and set the jumper JVLCD to +5V or +3.3V. 3. Prepare a LVDS type LCD cable 4.
L V -671 User ’ s Manu al Hardw are Setup Display Interface 27 After setup the devices w ell, you need to select the LCD p anel type in the BIOS. The panel type mapping is list below : BIOS panel type selection form For 18-bit color For 24-bit color NO.
L V -671 User ’ s Manu al Hardw are Setup A udio Interface 28 2.9 <Audio Interface> The board integrates Intel ICH4 with REAL T EK ALC655 codec for AC97 Rev 2.3; it comes w ith the features below: ● Microsoft WHQL/WLP 2.0 audio compliance ● Sof tware selectable for 2-channel/5.
L V -671 User ’ s Manu al Hardw are Setup A udi o In terface 29 Connector: CN_A UDIO Type: 10-pin (2 x 5) 2.54-pitch header Pin Description Pin Description 1 Line – Right 2 Ground 3 Line – Left .
L V -671 User ’ s Manu al Hardw are Setup Ethernet Interface 30 2.10 <Ethernet Interface> The board integrates w it h Intel 82540E M Gigabit controller at the type of 10Base-T/ 100Base-TX/1000Base- T auto-switching Ethernet w ith full duplex and IEEE 802.
L V -671 User ’ s Manu al Hardw are Setup Pow er and Fan Conne ctor 31 2.1 1 <Power and Fan connector> The board comes w ith a 4-p in Mini-DIN power connector for DC 12V/19V auto-s witching input, it also has one 4-pin P 4 additional use power conne ctor for internal power supply , you can choose one p f them to meet your application.
L V -671 User ’ s Manu al Hardw are Setup Pow er and Fan Conne ctor 32 Connector: CN_12V Type: 4-pin standard Pentium 4 +12V power connector Pin Description Pin Description 1 +12V 2 + 12V 3 Ground 4.
L V -671 User ’ s Manu al Hardw are Setup GPIO Interface 33 2.12 <GPIO Interface> The board offers 16-bit digital I/O to customiz e its configurat ion to your control needs. For example, you may configur e the digital I/O to control t he opening and closing of the cash draw er or to sense the warning signal from a tripped UPS.
L V -671 User ’ s Manu al Hardw are Setup Exp ansive Interface 34 2.13 <Exp ansive Interface> The board comes wi th one slim type PCI slot and one optio nal Mini-AGP or Mini-PCI interface. The slim PCI slot supports up to 2 PCI devices through an optio nal riser card.
L V -671 User ’ s Manu al Hardw are Setup Sw itch and Indicator 35 2.14 <Switch and Indicator> Connector: JFRNT Type: onboard 14-pin (2 x 7) 2.
L V -671 User ’ s Man ual 36 (This Page is Lef t for Blank).
L V -671 User ’ s Manu al System Set up W atchdog T imer Setting 37 Chapter 3 <System Setup> 3.1 <W atchdog Timer Setting> The watchdog timer makes the s y stem auto- reset while it stops to work for a period. The integrated wa tchdog timer can be setup as system reset mode by program.
L V -671 User ’ s Manu al System Set up A udio Setup 38 3.2 <Audio Setting> The board integrates Intel ® ICH4 with REAL T EK ® ALC655 codec. It can support 2-channel or 5.1 channel sou nd under s ystem c onfigurati on. Please foll o w the steps below to setup your sound sy stem.
L V -671 User ’ s Manu al System Set up Display Dev ice Setup 39 3.3 <Display Device Setup> This chapter shows y ou how to set up the display device under Windows OS. Before you us ing your display dev ice: 1. Check your sof tware Before you can use the display device properly , please install the VGA driver .
L V -671 User ’ s Manu al System Set up Display Dev ice Setup 40 For advanced display settings, please cli ck Advanced… button and choose Intel(R) Extreme Graphics.
L V -671 User ’ s Manu al System Set up Display Dev ice Setup 41 While you entering the Graphics Properties, y ou will see the options below : This o ption can le t you conf igure the CRT monitors for C olors, Screen Area (Resolution) and Refresh Rate.
L V -671 User ’ s Manu al System Set up Display Dev ice Setup 42 This o ption can le t you conf igure the Dual Display for clone mo de (same display on two devices) This o ption can le t you conf ig.
BIOS Setup BIOS Setup 43 L V -671 User ’ s Manual Chapter 4 <BIOS Setup> The single board comp uter uses the Award BIOS for the system configuratio n. The Award BIOS in the single board comp uter is a customiz ed version of the industria l stand ard BIOS for IBM PC AT-compatible computers.
L V -671 User ’ s Man ual 44 (This Page is Lef t for Blank).
L V -671 User ’ s Manual I/O Port Pin Assignment IDE Port 45 Appendix A <I/O Port Pin Assignment> A.1 <IDE Port> Connector: IDE1 Type: 40-pin (20 x 2) box header Pin Description Pin Desc.
L V -671 User ’ s Manual I/O Port Pin Assignment IDE Port 46 Connector: IDE2 Type: 44-pin (22 x 2) box header Pin Description Pin Description 1 Reset 2 Ground 3 D7 4 D8 5 D6 6 D9 7 D5 8 D10 9 D4 10 .
L V -671 User ’ s Manual I/O Port Pin Assignment Floppy Port 47 A.2 <Floppy Port> Connector: FDD Type: 26-pin connector Pin Description Pin Description 1 VCC 2 INDEX 3 VCC 4 DRV0 5 VCC 6 DSKCH.
L V -671 User ’ s Manual I/O Port Pin Assignment IrDA Port 48 A.4 <IrDA Port> Connector: CN_IR Type: 5-pin header for SIR Ports Pin Description 1 VCC 2 N/C 3 IRRX 4 Ground 5 IRTX A.
L V -671 User ’ s Manual I/O Port Pin Assignment Serial Port 49 A.7 < Serial Port > Connector: COM1 Type: 9-pin D-sub male connector on bracket Pin Description Pin Description 1 MDCD1- 6 MDSR1.
L V -671 User ’ s Man ual 50 (This Page is Lef t for Blank).
L V -671 User ’ s Manu al Flash BIOS Flash BIOS 51 Appendix B <Flash BIOS> B.1 <Flash T ool> The board is based on Award BIOS and can be updated easily by the BIOS auto flash tool. You can download the tool online at the address below : ht t p: / /www.
L V -671 User ’ s Man ual 52 (This Page is Lef t for Blank).
L V -671 User ’ s Man ual System Resource I/O A ddress Map 53 Appendix C <System Resource> C.1 <I/O Address Map> A dd ress Ran ge Dev ice x0000 - x000F Direct Memory Access Controller x0.
L V -671 User ’ s Man ual System Resource I/O A ddress Map 54 x03F8 - x03FF Communication Port (COM1) x0400 - x04BF Motherboard Resource x04D0 - x04D1 Motherboard Resource x0500 - x051F Intel(R) 828.
L V -671 User ’ s Man ual System Resource Memory A ddress Map 55 C.2 <Memory Address Map> Range Dev ice x00000000 - x0009FFFF System board extension for ACPI BIOS x000A0000 - x000AFFFF Intel(R.
L V -671 User ’ s Man ual System Resource System IRQ and DMA Resource 56 C.3 <System IRQ and DMA Resource> C3.1 IRQ IRQ Number Device 0 S y s t e m C l o c k 1 Standard 101/102-Key or Microsof.
L V -671 User ’ s Man ual System Resource System IRQ and DMA Resource 57 C3.2 DMA Channel Dev ice 0 (free) 1 (free) 2 Standard Floppy Disk Controller 3 (free) 4 Direct Memory Access Controller 5 (fr.
L V -671 User ’ s Man ual 58 Contact Information Any advice or comment about our pr oducts and service, or anything we can help you please don’t hesitate to cont act with us. We will do our best to support you for your products, project s and business T aiwan Commate Computer Inc.
Ein wichtiger Punkt beim Kauf des Geräts Commell Mini-ITX Motherboard LV-671 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Commell Mini-ITX Motherboard LV-671 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Commell Mini-ITX Motherboard LV-671 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Commell Mini-ITX Motherboard LV-671 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Commell Mini-ITX Motherboard LV-671 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Commell Mini-ITX Motherboard LV-671 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Commell Mini-ITX Motherboard LV-671 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Commell Mini-ITX Motherboard LV-671. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Commell Mini-ITX Motherboard LV-671 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
