Benutzeranleitung / Produktwartung TFDVD2495 des Produzenten COBY electronic
Zur Seite of 31
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’ s enclosure that may be of sufcient magnitude to constitute a risk of electric shock.
W ARNING: T o prevent re or shock hazard, do not expose this device to rain or mois ture. Dangerous high voltage is present inside the enclosure. Do not open the cabinet. Note: If the product suddenly has no response or powers off, an electrostatic discharge may be the cause.
W arnings and precautions T o prevent any injuries, the following safety precautions should be observed in the installation, use, servicing and maintenance of this equipment. Before operating this equipment, please read this manual completely , and keep it nearby for future reference.
Antenna Safety Instructions If an outdoor antenna is connected, follow the precautions below: An outdoor antenna should not be located in any area where it could come in contact with overhead • power lines, or any other electric light or power circuits.
T able Of Contents Precautions Important Safety Instructions Main Feature-----------------------------------------------------------------------------------------------------------------------------1 .
1 This product incorporates the LCD display and the TV receiver in one system. Multiple Mode TV AV S-VIDEO COMPONENT DVD VGA HDMI High Quality Property High Resolution Adopt an MPEG2 decoding format to achieve horizontal resolution more than 500 lines.
2 Please make sure the followi ng items are included with your LCD TV/monitor . If any item is missing, contact your dealer . a, Main Unit b, Power Cord & RCA Cable c, Remote Control Unit Package Contents a.
3 9 10 11 W all Mounting - Attach the TV case to the wall Separate the TV case and the stand-base by removing screws before installation. • Use the VESA standard mountings to x the unit on the wall. T ake care when mounting, it may cause • damage or serious injury should it fall from its mountings.
4 Remote Control Drawing 1. POWER T urn the unit on or off (standby). 2. Numeric Keypad Input numberic data. Access the TV channel directly . 3. Sub-channel Selector <-> This button is usually used with the numeric keypad to tune to a channel substation (e.
5 20. ANGEL Some discs are recorded with Multi-angle, press this button to chose the desired viewing angle. 21. OPEN/CLOSE In the DVD mode, press this button to take in/out disc automatically . 22. RETURN Reveal the previously viewed channel. 23. Skip Forward Repeatedly press this button to skip forward through DVD playback.
6 Remote Control Remote Control Preparation Remove the battery compartment cover located on the rear of the remote control. Insert 2 x “AAA” • batteries, making sure to match their polarities (+/-) to the markings on the inside of the compartment.
7 Antenna/Power Connection Connect TV RF sources to the Coaxia l TV Antenna In jack. TV RF signals includ e: receiving antenna/ 1. CA TV net. Y ou can use 75 Ohm coaxial cable to connect outdoor antenna. Insert one end of the supplied power cord to the player ’s power jack and the other end to a 1 10-240V AC 2.
8 Coaxial Output - Digital Audio Output Connector If y ou are us ing th e bu ilt -in TV t uner, you may wan t t o p lay th e TV a udi o t hro ugh you r s ter eo syst em for better sound quality . Select TV from the Input source menu to use this connection to watch TV with digital audio sound.
9 HDMI Input HDMI (High Denition Multimedia Interface) is a new type of connection that transmits digital audio and video signals simultaneously over a single cable. A HDMI cable is required for the HDMI connection.This cable has a male HDMI T ype-A connector on each end, carrying both digital video and audio.
10 S-Video Input The S-Video port is capable of accepting signals from standard video sources. (e.g., cable/satellite boxes, DVD players, VCRs, etc.) RCA Input The CVBS port is capable of accepting signals from standard video sources(e.g., cable/satellite boxes, DVD pla yer s, VCR s, et c.
11 Preparations Connect cables.(Refer to the “Cable Connections” section for details). 1. Press the POWER button to turn on the player . 2. Select the TV signal mode, using the SOURCE button. 3. Press the CH+/- buttons to skip channels. Or you can press the number buttons to input channels 4 .
12 Audio Menu Channel Menu TV Function ITEM DESCRIPTION Mode Set the audio mode as Custom/Standard/Theater/ Music/News. T reble/Bass/Balance Press the left/right direction button to adjust settings.
13 Settings Menu TV Function ITEM DESCRIPTION Parental Y ou are required to enter the 4-digit password to access this option. The initial password is 0000. Button Lock - This option would enable users to lock buttons on the unit panel. Block Unrated TV -The option would enable users to lock unrated TV program.
14 Settings Menu TV Function ITEM DESCRIPTION Time This option would enable users to adjust Date/Time information as well as to setup the sleep timer .
15 The player ’s A V input function would enable user to view programs from external signal sources. When input A V signals, read the user's manual of the external device as well. Connect the external A V signal source. Refer to the “Cable Connection” section for details 1.
16 Y ou can use the unit’s TFT LCD as your computer ’s monitor . Sh ut do wn t he u ni t a nd t he c om pu ter, co nn ec t t he V GA ja ck an d PC Aud io I n ja ck . S ee t he “C abl e 1. Connection” section. T urn on units and use the SOURCE button to select VGA 2.
17 Preparation After all necessary connections have been made, press POWER to turn on the player and then press the MODE button to select DVD. The following discs can be read by the player : DVD /CD / MP3 /JPEG. Disc Loading 1. Put the disc slightly into the disc tray .
18 CD Playback The player will play all tracks on a CD disc by default. MP3 Playback Load a disc into the disc tray . 1. It will start playback automatically . Or press direction buttons to select a le from the menu and press OK 2. or PLA Y/P AUSE button to start playback.
19 Start Playing Press PLA Y/P AUSE to start playback Pause Playing Press PLA Y/P AUSE once to hold playback, press it again to resume. Stop Playing Press STOP once to stop playback at a time point. (Pre-stop mode) It will resume from where it was stopped, when you press PLA Y button.
20 Slow Playback Slow Motion Press the SLOW button on the remote to have current playback advanced in a slow motion, repeatedly press this button to change speed as below . Step by Step Press Play/Pause to pause current playback, and then repeatedly press SLOW to have playback moved step by step forward.
21 V arious features can be preset through the DVD setup menu. Press the DVD SETUP button to show the DVD menu. While working with the setup menu: Press the direction buttons to select the desired item. 1. Press the right direction button or the OK button to conrm settings.
22 Language Setup Item Instruction Default OSD Language Setup the OSD language. English Audio Lang Setup the audio language. English Subtitle Lang Setup the subtitle language. When OFF is English selected, the subtitle will not be displayed. Menu Lang Setup the menu language.
23 If you have a problem with this device, please read the troubleshooting guide section and check our website at www .cobyusa.com for Freq uently Asked Questions (F AQs) and rmware updates. If these resources do not resolve the problem, please contact T echnical Support.
24 Specication TFDVD 2425 TFDVD1995(S2) Active Area Resolution Display Color Pixel Pitch TV System Antenna Impedance Standby Power Consumption Power Consumption Operating T emperature Range W all Mounting TFT Panel Characteristic TV Charactoristic Standard 23.
25 TFDVD2295(S2) TFDVD1595(S3) Active Area Resolution Display Color Pixel Pitch TV System Antenna Impedance Standby Power Consumption Power Consumption Operating T emperature Range W all Mounting TFT Panel Characteristic TV Charactoristic Standard 21.
TFT LCD Widescreen Television Instruction Manual Please read this manual carefully before connection and use TFDVD2495/2295(S2)/1995(S2)/1595(S3).
Ein wichtiger Punkt beim Kauf des Geräts COBY electronic TFDVD2495 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie COBY electronic TFDVD2495 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für COBY electronic TFDVD2495 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von COBY electronic TFDVD2495 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über COBY electronic TFDVD2495 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon COBY electronic TFDVD2495 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von COBY electronic TFDVD2495 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit COBY electronic TFDVD2495. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei COBY electronic TFDVD2495 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
