Benutzeranleitung / Produktwartung GP500 des Produzenten Clifford
Zur Seite of 28
.
.
Main te nance Your GP500 system requires no maintenance except for replacement o f remote control batteries when they reach the end of their useful life. Fo r further information on this, see the Automatic low battery warning and Remot e control battery replacement sections on page 13.
Wel come to the world of high- technology ve hi cle se cu rity and con ven ience C ongratulations on the purchase of your GP500 motorcycle security/convenience system.
Re motely con trol ling your GP500 Each of your two remote controls can command several different functions . TO ARM : Press button I on the remote control. You wil l hear two chirp s and the indicator lights will flas h twice. The LED will flash repeatedly.
TO AC TI VAT E IN STAN T AUTOARMIN G BYPASS : Press button III on the remote control and hold for three seconds. Two indicator light flashe s confirm that GP500 will NOT AutoArm. If you press and hold button III for three seconds onc e more, the system will respond with one indicator light flas h which means that AutoArming has been reactivated.
QUICK REF ER ENCE: RE MOTE CON TROL FUNC TIONS Functio n Press button(s ) Arm or dis ar m I Si lently arm or dis arm II In stant AutoArming By pass (press and hold but ton for three sec ond s while sy.
ACG-2™ (Anti- CodeGrabbing 2™) Clifford’s ACG-2 protects your motorcycle from thieves’ remote control “cloning” devices that are used to record the disarming code transmitted from your remote .
Two- Point In ter nal Im mo bi li sa tion Please be aware that the AutoArming feature has no effect o n Immobilisation. The system automatically immobilizes your vehicle’s starte r and ignition 30 seconds after engine shutdown or when you arm with th e remote control .
AutoArming ™ If this feature is enabled and you forget to remotely arm. After 30 second s pass, the system is automatically armed. In instances where you want to bypass AutoArming, such as when fueling the motorcycle, simply turn th e ignition on and then off again after you have parked.
TO RE MOTELY BY PASS BOTH ZONES : During the first 10 seconds after arming the system remotely, simultaneously press buttons I I and III on the remote control and hold for three seconds.
TO RE MOTEL Y AD JUST THE DUAL- ZONE PIEZO SEN SOR: With the ig ni tion turned OFF. Press but tons I I and III si mul ta ne ously for three sec onds. Th e sys tem will re spond with one chir p . To adjust the warning level of the sensor, yo u must have the ignition turned ON, to adjust th e trigger level of the sensor, turn the ignition OFF.
TO RE MOTELY BY PASS THE WARN ING ZONE: During the first 10 seconds after arming the system remotely, press button III on the remot e control. The system provides f our indicator ligh t flashes when the warning level is bypassed .
False Alarm Pre ven tion & FACT ™ With Clifford’s patented FACT (False Alarm Control and Test) feature , you’ll never experience repeated false alarms. If the siren sounds, DO NO T remotely disarm the system; allow it to run for the full 30-second sire n duration.
How to in ter pret the LED status in di ca tor LED Condition Meaning Of f Sys tem is dis arme d Flashing Steadil y (Ignition off ) Sys tem is arme d Flashing rapidl y (ignition off ) AutoArming Count .
Smart Au toTest ing ™ Each time you remotely arm the system, it tests all triggers and sensors. Fo r example, if the Helmet Theft Prevention System is active, you will receiv e the usual 2 chirps and flashes , then , 5 seconds later , there will be 4 chirp s and 4 flashe s .
LED flashe s Meaning 1 flash Ig ni tion switch was turned on 2 flashe s Ac ti va tion of Digi tal Tilt/Mo tion Sen so r 3 flashe s Ac ti va tion of Dual- Level Piezo Sen so r 4 flashe s Ac ti va tion .
Smart prior in tru sion at tempt aler t If you hear three chirps when you remotely disarm, it means that a trigger or sensor was activated in your absence. When you turn on the ignition (or start the engine), the LED will flash 1-8 times, pause, then repeat the flash cycle 4 more times.
Smart Powe rUp™ 2 If power to the system is ever removed, SmartPowerUp 2 ensures that you r GP500 system automatically restores itself to its previous state when power i s restored.
How to en ter your PIN Code for the first time The PIN code provides two functions: to turn the alarm off in the event tha t you cannot use your remote control and secondly, to access programmin g mode.
2 . Within 5 seconds, press and release the Plain V iew 2 ✱ button 7 times. T o help you count, you will hear a chirp each time you press the ✱ button.
Step- by- step pro gram ming in struc tions 1. Refer to the T able of programmable features on page 32 and find the feature you wish to program. Make note of the number of times to press the ✱ button . 2 . T urn the ignition on, or start the engine (skip this step if the engine i s running).
Ta ble of Pro gram ma ble Fea tures Featur e Factor y Settin g No. o f times to press the ✱ butto n Sec - ondar y Actio n Progra m completio n confirm - atio n Additiona l Actio n AutoArmin g OF F 2.
Featur e Factory Settin g No. o f times to press the ✱ butto n Sec - ondar y Actio n Progra m completion confirm - atio n Additiona l Actio n Pro gram othe r Clif ford ACG- 2 Re mote t o Arm/Dis arm.
Feature Factor y Setting No. o f times to press the ✱ butto n Sec - ondar y Actio n Progra m completio n confirm - atio n Additional Actio n Pro gram othe r Clif ford ACG- 2 Re mote to Ad jus t Piez.
2 4 GP50 0.
Your serial number is : REGISTER ONLINE: Within 10 days of purchase, yo u may register your Clifford purchase online at ww w .clifford.com/manuals so that we can contact you in the future if there are any changes or improvements to your GP500 system.
USA Head quar ters: Clif ford Elec tron ics, Inc. 20750 Las sen Street, Chatsworth, CA 91311 Within USA: 1- 800- 824- 3208 Phone: (818) 709- 7551 Fax: (818)407- 1743 All Clifford sys tems are cov ered.
Ein wichtiger Punkt beim Kauf des Geräts Clifford GP500 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Clifford GP500 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Clifford GP500 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Clifford GP500 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Clifford GP500 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Clifford GP500 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Clifford GP500 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Clifford GP500. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Clifford GP500 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
