Benutzeranleitung / Produktwartung Omega Super Audio des Produzenten Classe Audio
Zur Seite of 12
OWNER’S MANUAL Omega Super Audio Compact Disc Player V1.0.
CONTENTS Safety Precautions 3 Introduction 3 Congratulations 3 How to use this manual 3 Classé Omega SACD Player: Design Overview 3 T ransport 3 Digital Filtering Section 3 DAC Section 4 Power Supply.
3 SAFETY PRECAUTIONS W ARNING: failure to comply with these safety instructions can cause serious injury or death, or cause your Classé Omega SACD Player to be severely damaged or destroyed. Do not operate the Classé Omega SACD Player with any portion of the chassis removed or open.
4 DAC Section The digital to analog conversion circuitry is a completely new design by Classé Audio. This unique design utilizes six channels of the Crystal CS4397 delta-sigma converter . For each of the Omega SACD balanced outputs, two channels of this DAC are used, one for the positive signal and one for the negative.
AC power Check that the AC voltage for which this unit is configured matches your local AC line voltage. The correct operating voltage is indicated on the rear of the power supply chassis, adjacent to the AC power inlet.
6 CONTROLS AND OPERA TION This section describes all of the controls, front panel display , and operation of the Omega SACD Player . T urning on AC power The Omega SACD is turned on by means of a power switch located on the power supply unit. Do not turn the AC power on until all connections have been made.
Front panel display Below is an illustration of the Omega SACD front panel display and a description of each indicator . The remote control The remote control pr ovides access to all functions available on the front panel. In addition, several functions can only be accessed from the remote control.
8 Playing a disc After the disc is loaded and the drawer closed, the Omega SACD Player will begin to detect which type of disc has been loaded and read the table of contents. Note that the Omega SACD player takes longer to start playing after the disc is loaded compared to conventional CD players.
Using the direct access keypad The ten-digit keypad on the remote control can be used to directly access any track on the disc. Press the digits of the track you wish to access. T o access a track number greater than 11, press the >10 key , and then enter the two digit track number .
10 Controlling the display The Omega SACD Player display function can be changed using keys on the remote control as follows: ON/OFF Pressing the ON/OFF key will cause the display toggle between ON mode and OFF mode. In OFF mode, the display will remain off unless a key on the top panel or the remote control is pressed.
Using the Omega SACD remote control with other Classé products The Omega SACD Player remote control can be used to control all Classé pre-amplifiers and integrated amplifiers. VOLUME UP/DOWN Pressing these keys will raise or lower the pre-amplifier or integrated amplifier volume level.
W ARRANTY AND SERVICE For warranty service, contact your Classé dealer or Classé Audio directly at: Classé Audio 5070 Francois-Cusson Lachine, Québec Canada H8T 1B3 T elephone: +1 514 636 6384 Fax: +1 514 636 1428 email: cservice @ classeaudio.com Website: www .
Ein wichtiger Punkt beim Kauf des Geräts Classe Audio Omega Super Audio (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Classe Audio Omega Super Audio noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Classe Audio Omega Super Audio - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Classe Audio Omega Super Audio reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Classe Audio Omega Super Audio erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Classe Audio Omega Super Audio besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Classe Audio Omega Super Audio verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Classe Audio Omega Super Audio. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Classe Audio Omega Super Audio gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.