Benutzeranleitung / Produktwartung CH-432BS des Produzenten Citizen
Zur Seite of 25
English INSTRUCTION MANUAL FOR DIGIT AL BLOOD PRESSURE MONITOR REF CH-432BS Design and Speci fi c atio n are sub je ct to cha ng e wi thou t noti ce. CITIZEN is a r egist ered trade mark of Citiz en Holdings Co . , Japan . CITIZEN es una mar ca registrada de Citizen Holdings Co .
- Eng 2 - CH-432BS Ensure that you have all the following components Contents 3 - GENERAL REMARKS 5 - PRECAUTIONS FOR USE AND MAINTENANCE 8 - IDENTIFICA TIONS OF P ARTS 10 - LOADING THE BA TTERIES 11 .
- Eng 3 - English General remarks on blood pr essure and blood pr essure measurement 1. T o de fl ate the cuf f quickly , press the “ST ART/STOP” switch. 2. The attached cuff is suitable for arm cir cumferences of 22-32 cm. 3. When attaching the cuff, the air hose should be placed on the inside of your arm on top of the artery .
- Eng 4 - English GENERAL REMARKS 9. DO NOT measure blood pr essure when the cuff has been on your arm for a few minutes or more. During this time, your arm will have built up a higher blood pressur e and you will not get valid reading. 10. The fi gur e below shows the blood pressur e classi fi cations under the WHO standards.
- Eng 5 - English Precautions for use 1. If you suffer fr om heart disease, high blood pressure or other cir culatory disease, consult your physician before using the monitor .
- Eng 6 - English PRECAUTIONS FOR USE AND MAINTENANCE 15. Be sure to use this unit only for measuring blood pressure. DO NOT use it for any other purpose.
- Eng 7 - English Nature and fr equency of maintenance: This product is designed for use over an extended period of time; however , it is generally recommended that it be inspected every two years to ensure pr oper function and performance.
- Eng 8 - English IDENTIFICA TION OF P AR TS Component names ST ART/STOP Switch w Stand-by Systolic blood pressure display Air hose socket Diastolic blood pressure/Pulse display Pressurization setting.
- Eng 9 - English IDENTIFICA TION OF P ARTS Battery cover Air hose connector Air hose <Cuff> Blue marker.
- Eng 10 - English LOADING THE BA TTERIES (Batteries supplied with the unit should be loaded in compartment before you use the blood pressur e monitor .) 1 Open the cover of battery compartment. Pressing the hook down, pull the cover towar d you to open.
- Eng 11 - English LOADING THE BA TTERIES REMOVING THE BA TTERIES • When the icon is displayed or nothing appears in the display , replace the old batteries with four new ones. All four batteries should be changed at once. • The memory is erased if the batteries are r emoved for replacement.
- Eng 12 - English USING AC ADAPTER (OPTION) • If you plan to use the AC adapter for an extended period of time, remove the batteries. If the batteries are left in the compartment, electr olyte may leak from the batteries and cause a fault in the blood pressur e monitor .
- Eng 13 - English MEASURING YOUR BLOOD PRESSURE 3 Adjust the position of the arm cuff so that the blue marker is located in the center of your arm and the hem of the cuff is 1 to 2 cm above your elbow . * The cuff should be put on the bare arm or over a light-weight underwear .
- Eng 14 - English MEASURING YOUR BLOOD PRESSURE 4 Pull the end of the arm cuff outwards so that the cuf f is snug around your arm and then secure the end to the V elcro. 5 Place your arm on a table or the like, so that the center of the cuff comes to the height of your heart.
- Eng 15 - English TIPS FOR OBT AINING ACCURA TE MEASUREMENTS Y our blood pressur e varies according to your postur e, the time of day and a range of other factors. Ideally , you should measure your blood pr essure in the same postur e at the same time every day .
- Eng 16 - English MEASURING YOUR BLOOD PRESSURE • Plug the air hose connector fi rmly into the air hose socket on the main unit, as illustrated. 2 Plug the air hose connector into the main unit. 3 Set the pressurization setting value The setting value should be at least 30mmHg higher than the normal systolic blood pressur e value.
- Eng 17 - English MEASURING YOUR BLOOD PRESSURE 4 Place the cuff at the height of the heart. 5 Press the ST ART/STOP switch (the yellow switch). * If the pr essurization value exceeds 280mmHg, if pressurization feels abnormal, or if you want to stop the measurement pr ocess, press the ST ART/STOP switch again.
- Eng 18 - English MEASURING YOUR BLOOD PRESSURE 3 Once pressurization is complete, there is a pause befor e lights and measurement begins automatically . 4 fl ashes each time a pulse is counted, and the pressur e value is displayed on the diastolic blood pressur e display .
- Eng 19 - English MEASURING YOUR BLOOD PRESSURE • Press the “ST ART/STOP” switch to turn the monitor off. * When you want to stop measurement, press the “ST ART/STOP” switch. The cuff is de fl ated and measurement stops. 6 Finishing measurement.
- Eng 20 - English Icon displayed Condition/Cause Displayed during measurement. Lit Measurement is under way . Flashing Pulse detected. Displayed during measurement. “PUL Err” is displayed when the pulse value is below 40 or above 181. If any of the following marks is displayed, take the specifi ed action, then repeat the operation.
- Eng 21 - English ABOUT “BLOOD PRESSURE” What is blood pressur e? The heart is a pump that circulates blood thr oughout your body . Blood is pumped from the heart at a constant pr essure into arteries. This pressur e is called the arterial blood pressur e and represents, in general terms, your blood pr essure.
- Eng 22 - English Q Why is the blood pressure measured at home differ ent from that measured by the physician or at a hospital? A Y our blood pressure may vary due to exer cise, the ambient temperature or your mental state.
- Eng 23 - English Make sure to check the following befor e sending your blood pressure monitor away to be tested or repair ed. Problem Checks Response Display stays blank when you press the “ST ART/ STOP” switch. Check whether the batteries are dead.
- Eng 24 - English SPECIFICA TIONS Model Number: CH-432BS Measurement system: Oscillometric method Measurement Localization Upper Arm Cuff: Soft cuff Arm circumference range: 22.
English INSTRUCTION MANUAL FOR DIGIT AL BLOOD PRESSURE MONITOR REF CH-432BS Design and Speci fi c atio n are sub je ct to cha ng e wi thou t noti ce. CITIZEN is a r egistered trade mark of Citizen Holdings Co ., Japan. CITIZEN es una mar ca registrada de Citizen Holdings Co .
Ein wichtiger Punkt beim Kauf des Geräts Citizen CH-432BS (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Citizen CH-432BS noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Citizen CH-432BS - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Citizen CH-432BS reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Citizen CH-432BS erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Citizen CH-432BS besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Citizen CH-432BS verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Citizen CH-432BS. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Citizen CH-432BS gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
