Benutzeranleitung / Produktwartung NI-1 des Produzenten Cisco Systems
Zur Seite of 28
C HAPTER 6-1 Cisco Provis ioning Cent er User’s Guid e 78-11339-01 6 Configuring the Cisco NI-1 DLSAM Equipment Module The Cisco 6100/6130 NI-1 DSLAM Equ ipment Module supports provisioning of cross connections on Cisco 6100/6130 NI-1 DSL access co ncentrators.
6-2 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Supported Equipment • Subtended N etwork Configuration. Allo ws up to se ven Cisco 6100/6130 chassis t o be linked to a sin gle W AN trunk.
6-3 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Summary of Configuration Tasks Note In order to conf igure the NI-1 DLSA M Equipment Module you must ha ve installed it during the CPC Serv er and Client inst allation procedures.
6-4 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Initial System Upload Step 4 Run the follo wing commands in succession to source the Server en vironment and start the CPC Server: cd /opt/SY/Activator/Server/mng/utility .
6-5 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Initial System Upload Before You Upload: Creating a Network Object One network object must be crea ted for each network. The follo win g steps explain ho w to create a network object.
6-6 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Initial System Upload Creating a Node Object Y ou should create node objects for all Cisco 6100/6130 nodes in t he network. The foll ow ing steps explain ho w to create a node object.
6-7 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Initial System Upload T ransit Cost This is the cost of crossing the sub-network. Thi s attrib ute is used by the Threader to determine the lo west cost path when threading a service.
6-8 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Initial System Upload Network Upload Uploading the Fabric and Servi ce Elements fo.
6-9 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Initial System Upload Uploading the Fabric Elem ents for a Network Object Gi ven that the network obj ect is in place, you can no w upload fabric.
6-10 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Re-Upload Uploading the Fabric Elements for a Node Object After you create a node object, you may want to upload just the f abric elements for that node.
6-11 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Working with Logical Ports T o re-upload y ou need to upload the f abric and Serv ice elements for t hat node.
6-12 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Naming Logical Ports Deleting Logical Ports Deleting an A TM logical port will d elete an agent subscr iber from the Cisco 610 0/6130.
6-13 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Working wit h Service Elem ent Profiles Working with Service Element Profiles Service element prof iles provide you with access to th e Cisco-specif ic attributes for a particular Serv ice element.
6-14 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Working with Service Element Profiles Step 4 Sav e and apply the pr ofile ob ject by cli cking the Sa ve an d A pply butto ns on the toolbar .
6-15 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Working wit h Service Elem ent Profiles Figure 6-1 Cisco 61 0 0/6130 DSL Phys ica.
6-16 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Working with Service Element Profiles T able 6-4 lists the configurabl e attribut es for a Cisco 6100/ 6130 DSL physical p ort prof ile.
6-17 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Working wit h Service Elem ent Profiles Cisco 6100/6130 Modem Card Ty p e The modem card type (line card type) that contai ns this physical port CAP ADSL, DMT2ADSL, 2B1QSDSL CAP ADSL Modem Card Subtype The modem card subtype.
6-18 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Working with Service Element Profiles T raining Mode The training mode for the ph ysical port. In standard mode, the modem attempts to train us ing the method specifi ed by T1.
6-19 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Working wit h Service Elem ent Profiles A TU-C CAP CPE Signature This attribut e specif ies a CPE software signature (w hich corresponds to a speci fic v e rsion).
6-20 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Working with Service Element Profiles Reed Solomon Reed Solomo n erro r encoding can be config ured for the A TU-C running in CAP mode.
6-21 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Working wit h Service Elem ent Profiles ATM Logical Port Profile Attributes The A TM logical port prof ile provides you with acce ss to the A TM attributes that you can configure for an A TM logical port.
6-22 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Working with Service Element Profiles Figure 6-2 Cisco 61 0 0/6130 A TM Logi cal P or t Pr ofile Object V i ewer T able 6-5 lists the configurabl e attrib utes for a Cisco 6100/ 6130 A TM logical port prof ile.
6-23 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Working wit h Service Elem ent Profiles Administrati ve Status Specify the administrativ e status of the logical port.
6-24 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Working with Service Element Profiles Multiple Ranges Specify whether or not to enable or disable mult iple ranges. TR UE, F ALSE F ALSE EMS Name The name of the logical port used in the Element Management System.
6-25 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Working wit h Service Elem ent Profiles ATM-ATM Cross Connection Service Element .
6-26 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Working with Service Element Profiles Figure 6-3 C isco 61 00/61 30 A TM-A TM Cr .
6-27 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Working wit h Service Elem ent Profiles T able 6-6 lists the configurabl e attribut es for a Cisco 6100/613 0 A TM-A T M cross connections.
6-28 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Working with Service Element Profiles A to Z, Z to A Directions Bandwidth (kbits/ s) The bandwidth for the cr oss connection.
Ein wichtiger Punkt beim Kauf des Geräts Cisco Systems NI-1 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Cisco Systems NI-1 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Cisco Systems NI-1 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Cisco Systems NI-1 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Cisco Systems NI-1 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Cisco Systems NI-1 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Cisco Systems NI-1 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Cisco Systems NI-1. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Cisco Systems NI-1 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
