Benutzeranleitung / Produktwartung AS5300 des Produzenten Cisco Systems
Zur Seite of 24
Quick Start Guide Cisco AS5300 Universal Access Server 1 Documents, Equipment, and T ools 2 Install the Cisco AS5300 3 Gather Configuration Information 4 Configure the Cisco AS5300 5 Obtaining Documen.
2 1 Documents, Equipment, and Tools User Documentation All of the documents described here are available online and on the documentation CD-ROM that you received with your Cisco AS5300. T o be sure of obtaining the latest information, you should access the online documentation.
3 Release Notes Cisco IOS release notes for the Cisco AS5300 provide up-to-date information about specif ic Cisco IOS software releases used on Cisco AS5300s.
4 Release Notes Cisco IOS release notes for all platforms provide up-to-date information about specif ic Cisco IOS software releases. Y ou can access these documents at: Cisco Product Documentation &g.
5 • Serial 12-in-1 cable (serial to W AN access) • Slot cover for unused slots • 19-in. telco rack-mount brackets 2 Install the Cisco AS5300 Warning This unit is intended for installation in restricted access areas.
6 Prepare the Chassis for Desktop Use Attach the rubber feet before installing the chassis on a desktop. Note Rubber feet are included. Step 1 Locate the rubber feet on the black adhesive strip that shipped with the chassis. Step 2 Place the Cisco AS5300 upside-down on a f lat, smooth surface.
7 Connect the Ethernet Port for LAN Access Y ou can connect the Cisco AS5300 to a 10BASE-T or 100BASE-T Ethernet network. Y ou will need an Ethernet cable to connect the Cisco AS5300 to an Ethernet hub.
8 Connect the T1/PRI Card for WAN Access Warning Do not work on the system or connect or disconnect cables during periods of lightning activity . Warning The ISDN connection is regarded as a source of voltage that should be inaccessible to user contact.
9 Connect the E1/PRI Card for WAN Access Warning This equipment is to be installed and maintained by service personnel only as defined by AS/NZS 3260 Clause 1.2.14.3 Service Personnel. Warning The telecommunications lines must be disconnected 1) before unplugging the main power connector and/or 2) while the housing is open.
10 Connect the Serial Port for WAN Access Use a serial 12-in-1 cable (DTE if connecting to a DSU or DCE if connecting to a CSU) to connect one of the four synchronous serial ports on the E1 or T1 PRI cards (with serial support) to a modem or a CSU or DSU.
11 Connect a Console for Local Administrative Access T o conf igure the Cisco AS5300 from a locally-connected PC or terminal, you will need an RJ-45-to-RJ-45 rollover cable and a terminal adapter (RJ-45-to-DB-9 or RJ-45-to-DB-25). The cable and adapter are included.
12 Connect a Modem for Remote Administrative Access (Optional) T o conf igure the Cisco AS5300 from a remote location, you will need an RJ-45-to-RJ-45 rollover cable and a modem adapter (RJ-45-to-DB-25) for connecting a modem.
13 Connect Power The access server is available with either an AC or DC power supply . Y ou can also order a power supply as a spare if you decide later that you need a different type of power supply or the power supply fails. Warning Do not touch the power supply when the power cord is connected.
14 Warning The illustration shows the DC power supply terminal block. Wire the DC power supply using the appropriate wire terminations at the wiring end, as illustrated. The proper wiring sequence is ground to ground, positive to positive, and negative to negative.
15 3 Gather Configuration Information Use this section to help gather and organize the information you need to run the setup script to conf igure your Cisco AS5300. The information in the table is not an exhaustive list, but provided only as a starting point when using the setup script.
16 6. Do you want to conf igure the modems for: Default chat script? Dial-in IP SLIP/PPP access? Dynamic IP address? Default IP address? TCP header compression? Routing updates on async lines? Async IPX? ARA? • ARA clients? • Zone name for ARA clients? 7.
17 4 C onfigure the Cisco AS5300 Use any of the following options for conf iguring your Cisco AS5300: • Cisco Fast Step Software • Cisco IOS Release Setup Script • Initial Conf iguration Using the CLI (Manual Conf iguration) • Conf iguring V oIP The option you select depends on how you want to conf igure your Cisco AS5300.
18 Configure the Cisco AS5300 After installation, the Cisco Fast Step setup program starts automatically . Follow the onscreen instructions to guide you through conf iguring and testing the Cisco AS5300.
19 --- System Configuration Dialog --- Step 2 When the following prompt appears, enter yes to continue: Would you like to enter the initial configuration dialog? [yes]: yes At any point you may enter a question mark '?' for help. Use ctrl-c to abort configuration dialog at any prompt.
20 Configuring VoIP The actual conf iguration procedure depends entirely upon the topology of your voice network, but, in general, you need to complete the following conf iguration tasks: 1. Conf igure IP Networks for Real-T ime V oice T raff ic. 2. Conf iguring V oice Ports for ISDN PRI.
21 5 Obtaining Documentation The following sections provide sources for obtaining documentation from Cisco Systems. World Wide Web Y ou can access the most current Cisco documentation on the W orld Wide W eb at the following sites: • http://www .cisco.
22 6 Obtaining Technical Assistance Cisco provides Cisco.com as a starting point for all technical assistance. Customers and partners can obtain documentation, troubleshooting tips, and sample conf igurations from online tools. For Cisco.com registered users, additional troubleshooting tools are available from the T AC website.
23 Contacting TAC by Telephone If you have a priority level 1 (P1) or priority level 2 (P2) problem, contact T AC by telephone and immediately open a case. T o obtain a directory of toll-free numbers for your country , go to the following website: http://www .
Corporate Headquarters Cisco Systems, Inc. 170 W est T asman Drive San Jose, CA 95134-1706 USA www .cisco.com T el: 408 526-4000 800 553-NETS (6387) Fax: 408 526-4100 European Headquarters Cisco Systems Europe 11 Rue Camille Desmoulins 92782 Issy-les-Moulineaux Cedex 9 France www-europe.
Ein wichtiger Punkt beim Kauf des Geräts Cisco Systems AS5300 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Cisco Systems AS5300 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Cisco Systems AS5300 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Cisco Systems AS5300 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Cisco Systems AS5300 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Cisco Systems AS5300 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Cisco Systems AS5300 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Cisco Systems AS5300. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Cisco Systems AS5300 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
