Benutzeranleitung / Produktwartung 6100 des Produzenten Cisco Systems
Zur Seite of 26
CHAPTER Cisco 6100 Series User Guide 3-1 3 Cisco 6100 Ser ies System Cab les This chapter provides Netw ork Equipment Building Systems (NEBS) compliance cabling guidelines, cabling configuration diag.
3 Cisco 6100 Series System Cables 78-6643-01 09/27/99 Cisco 6100 Series User Guide 3-2 T able 3-1 shows an ov erview of the cables used for each Cisco 6100 Series system configuration.
78-6643-01 09/27/99 Cisco 6100 Series System Cables 3 Cisco 6100 Series User Guide 3-3 3.1 NEBS Compliance Cabling Guidelines T o comply with NEBS requirements, ensure that all cables are scre wed in to the backplane and that the Champ connectors are tie wrapped.
3 Cisco 6100 Series System Cables 78-6643-01 09/27/99 Cisco 6100 Series User Guide 3-4 3.2.1 MC to PSC Cab les Y ou can use the following cables when you are cabling the MC to the PSC in a Direct Connect with a PSC configuration: • One-to-one cables—Used to connect the MC to the PSC for systems using dual-port CAP or DMT -2 A TU-C modules.
78-6643-01 09/27/99 Cisco 6100 Series System Cables 3 Cisco 6100 Series User Guide 3-5 Figure 3-2 shows the cabling between the MC and the PSC in which the cables listed in T able 3-2 are used.
3 Cisco 6100 Series System Cables 78-6643-01 09/27/99 Cisco 6100 Series User Guide 3-6 T w o-to-One Cab les Y ou can use two-to-one cables to connect one MC to two PSCs for systems using dual-port or quad-port A TU-C modules. Quad-port A TU-C modules will be av ailable in a future release.
78-6643-01 09/27/99 Cisco 6100 Series System Cables 3 Cisco 6100 Series User Guide 3-7 Figure 3-4 shows the cabling between one MC and tw o PSCs in which the cables listed in T able 3-3 are used.
3 Cisco 6100 Series System Cables 78-6643-01 09/27/99 Cisco 6100 Series User Guide 3-8 3.2.2 PSC to MDF Cab les Y ou can use the following cables to connect the PSC to the MDF in a Direct Connect with a PSC configuration: • One-to-one cables—Used to connect the PSC to the MDF .
78-6643-01 09/27/99 Cisco 6100 Series System Cables 3 Cisco 6100 Series User Guide 3-9 Figure 3-6 shows the cabling between the PSC to the MDF in which the cables listed in T able 3-4 are used.
3 Cisco 6100 Series System Cables 78-6643-01 09/27/99 Cisco 6100 Series User Guide 3-10 Note When you use the two-to-two cable, see T able C-3 on page C-8 for port mapping information.
78-6643-01 09/27/99 Cisco 6100 Series System Cables 3 Cisco 6100 Series User Guide 3-11 Figure 3-9 shows the cabling between the xDSL subscriber line connectors on the PSC and the MDF in which the cables listed in T able 3-5 are used.
3 Cisco 6100 Series System Cables 78-6643-01 09/27/99 Cisco 6100 Series User Guide 3-12 3.3.1 T wo-to-Three Cab les T o associate the MDF wire pairs and the MC modem ports, the two-to-three cable remaps the wire pairs from the MC connectors to the MDF connectors.
78-6643-01 09/27/99 Cisco 6100 Series System Cables 3 Cisco 6100 Series User Guide 3-13 Figure 3-12 shows the cabling between the MC and the MDF in which the cables listed in T able 3-6 are used. Figure 3-12 MC to MDF Cabling Diagram with T w o-to-Three Cables 3.
3 Cisco 6100 Series System Cables 78-6643-01 09/27/99 Cisco 6100 Series User Guide 3-14 Figure 3-13 shows the three-to-three cable. Figure 3-13 Three-to-Three Cable 23648 J40 J41 P5 Slots 7, 8, 21 to .
78-6643-01 09/27/99 Cisco 6100 Series System Cables 3 Cisco 6100 Series User Guide 3-15 Figure 3-14 shows the cabling between the MC and the MDF in which the cables listed in T able 3-7 are used. Figure 3-14 MC to MDF Cabling Diagram with Three-to-Three Cab les 3.
3 Cisco 6100 Series System Cables 78-6643-01 09/27/99 Cisco 6100 Series User Guide 3-16 Figure 3-15 shows the fi ve-to-six cable. Figure 3-15 Five-to-Six Cable Figure 3-16 shows the cabling between the MC and the MDF in which the cables listed in T able 3-8 are used.
78-6643-01 09/27/99 Cisco 6100 Series System Cables 3 Cisco 6100 Series User Guide 3-17 3.4 DOH Configuration Cables In a DOH configuration, use only designated cables to connect the MC, LCC, PSC, and MDF .
3 Cisco 6100 Series System Cables 78-6643-01 09/27/99 Cisco 6100 Series User Guide 3-18 Figure 3-17 shows the cabling connecting the DOH components in which the cables listed in T able 3-9 are used. Figure 3-17 Cabling Components f or a DOH Configuration 3.
78-6643-01 09/27/99 Cisco 6100 Series System Cables 3 Cisco 6100 Series User Guide 3-19 One-to-One Cables Y ou can use one-to-one cables to connect the PSC to the MDF or external v oice equipment.
3 Cisco 6100 Series System Cables 78-6643-01 09/27/99 Cisco 6100 Series User Guide 3-20 Figure 3-20 shows the cabling between the PSC and the e xternal voice equipment in which the cables listed in T able 3-10 are used.
78-6643-01 09/27/99 Cisco 6100 Series System Cables 3 Cisco 6100 Series User Guide 3-21 Figure 3-21 shows the tw o-to-two cable. Figure 3-21 T wo-to-T wo Cable Figure 3-22 shows the cabling between the xDSL subscriber line connectors on the PSC and the MDF in which the cables listed in T able 3-11 are used.
3 Cisco 6100 Series System Cables 78-6643-01 09/27/99 Cisco 6100 Series User Guide 3-22 Figure 3-23 shows the cabling between the v oice lines on the PSC and the voice switching equipment that provides local PO TS service. The cables listed in T able 3-11 are used for the connection.
78-6643-01 09/27/99 Cisco 6100 Series System Cables 3 Cisco 6100 Series User Guide 3-23 3.5.1 Cab ling Diagr ams T wo DS3 system I/O cards are currently av ailable. Figure 3-24 shows the basic cabling of the subtended network configuration with the DS3 system I/O card that is a v ailable from Release 2.
3 Cisco 6100 Series System Cables 78-6643-01 09/27/99 Cisco 6100 Series User Guide 3-24 Figure 3-25 shows the basic cabling of the subtended netw ork configuration with the DS3 system I/O card that is av ailable earlier than Release 2.4.0. Figure 3-25 Basic Cabling f or Subtending Before Release 2.
78-6643-01 09/27/99 Cisco 6100 Series System Cables 3 Cisco 6100 Series User Guide 3-25 3.6 Siecor PO TS Splitter Cables The Siecor ADSL PO TS Splitter Rack-Mount Shelf is compatible with the Cisco 6130. If you use the Siecor PO TS splitter, you need six one-to-one cables to connect the PO TS splitter to the Cisco MC connectors J39 through J44.
3 Cisco 6100 Series System Cables 78-6643-01 09/27/99 Cisco 6100 Series User Guide 3-26.
Ein wichtiger Punkt beim Kauf des Geräts Cisco Systems 6100 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Cisco Systems 6100 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Cisco Systems 6100 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Cisco Systems 6100 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Cisco Systems 6100 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Cisco Systems 6100 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Cisco Systems 6100 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Cisco Systems 6100. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Cisco Systems 6100 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.