Benutzeranleitung / Produktwartung 12.2(35)SE des Produzenten Cisco Systems
Zur Seite of 26
Corporate Headquarters: © 20 07 Cisco Systems, Inc. All rights reserved. Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA Release Notes for the Cisco Catalyst Blade Switch 3040 for FSC, Cisco IOS Release 12.2(35)SE January 8, 2007 Cisco IOS Release 12.
2 Release Notes for the Cisco Catalyst Blade Switch 3040 for FSC, Cisco IOS Release 12.2(35)SE OL-12212-01 Contents Contents This information is in the release notes: • “System Requirements” sec.
3 Release Notes for the Cisco Catalyst Blade Switch 3040 for FSC, Cisco IOS Release 12.2(35)SE OL-12212-01 System Requirements System Requirements The system requirements are described in these sectio.
4 Release Notes for the Cisco Catalyst Blade Switch 3040 for FSC, Cisco IOS Release 12.2(35)SE OL-12212-01 Upgrading the Switch Software Upgrading the Switch Software These are the procedures for do wnloading software.
5 Release Notes for the Cisco Catalyst Blade Switch 3040 for FSC, Cisco IOS Release 12.2(35)SE OL-12212-01 Upgrading the Switch Software Cisco routinely remov es old Cisco IOS versions from Cisco.com. See Pr oduct Bulletin 2863 for more information: http://www .
6 Release Notes for the Cisco Catalyst Blade Switch 3040 for FSC, Cisco IOS Release 12.2(35)SE OL-12212-01 Installation Notes Step 5 (Optional) Ensure that you hav e IP connecti vity to the TFTP serve.
7 Release Notes for the Cisco Catalyst Blade Switch 3040 for FSC, Cisco IOS Release 12.2(35)SE OL-12212-01 Limitations and Restrictions Limitations and Restrictions Y ou should revie w this section before you be gin working with the switch. These are kno wn limitations that will not be f ixed, and there is not always a workaround.
8 Release Notes for the Cisco Catalyst Blade Switch 3040 for FSC, Cisco IOS Release 12.2(35)SE OL-12212-01 Limitations and Restrictions • When port security is enabled on an interface in restricted .
9 Release Notes for the Cisco Catalyst Blade Switch 3040 for FSC, Cisco IOS Release 12.2(35)SE OL-12212-01 Limitations and Restrictions MAC Addressing Multicasting These are the multicasting limitatio.
10 Release Notes for the Cisco Catalyst Blade Switch 3040 for FSC, Cisco IOS Release 12.2(35)SE OL-12212-01 Limitations and Restrictions QoS These are the quality of service (QoS) limitations: • Some switch queues are disabled if the buf fer size or threshold le vel is set too lo w with the mls qos queue-set output global conf iguration command.
11 Release Notes for the Cisco Catalyst Blade Switch 3040 for FSC, Cisco IOS Release 12.2(35)SE OL-12212-01 Important Notes • For trunk ports or access ports conf igured with IEEE 802.1Q tagging, inconsistent statistics might appear in the show interfaces counters pri vileged EXEC command output.
12 Release Notes for the Cisco Catalyst Blade Switch 3040 for FSC, Cisco IOS Release 12.2(35)SE OL-12212-01 Important Notes Device Manager Notes These notes apply to the device manager: • W e recommend this browser setting to more quickly display the de vice manager from Microsoft Internet Explorer .
13 Release Notes for the Cisco Catalyst Blade Switch 3040 for FSC, Cisco IOS Release 12.2(35)SE OL-12212-01 Open Caveats Beginning in pri vileged EXEC mode, follo w these steps to conf igure the HTTP server interface: • If you use Internet Explorer V ersion 5.
14 Release Notes for the Cisco Catalyst Blade Switch 3040 for FSC, Cisco IOS Release 12.2(35)SE OL-12212-01 Open Caveats • CSCsc96474 The switch might display tracebacks similar to these examples when a lar ge number of IEEE 802.1x supplicants try to repeatedly log in and log out.
15 Release Notes for the Cisco Catalyst Blade Switch 3040 for FSC, Cisco IOS Release 12.2(35)SE OL-12212-01 Resolved Caveats • CSCsg81334 If IEEE 802.
16 Release Notes for the Cisco Catalyst Blade Switch 3040 for FSC, Cisco IOS Release 12.2(35)SE OL-12212-01 Updates to System Message Guide • CSCsc29225 When you remov e the bridge topology change trap with the no snmp-server enable traps bridge topologychange conf iguration command, the stpx root-inconsistency trap is now acti ve.
17 Release Notes for the Cisco Catalyst Blade Switch 3040 for FSC, Cisco IOS Release 12.2(35)SE OL-12212-01 Updates to System Message Guide Error Message GBIC_SECURITY_CRYPT-4-ID_MISMATCH: Identificat.
18 Release Notes for the Cisco Catalyst Blade Switch 3040 for FSC, Cisco IOS Release 12.2(35)SE OL-12212-01 Updates to System Message Guide Error Message WCCP-5-SERVICEFOUND: Service [chars] acquired on WCCP Client [IP_address] Explanation W eb Cache Communication Protocol (WCCP) has found a service on the specif ied WCCP client.
19 Release Notes for the Cisco Catalyst Blade Switch 3040 for FSC, Cisco IOS Release 12.2(35)SE OL-12212-01 Related Documentation Related Documentation These documents provide complete information about the Cisco Catalyst Blade Switch 3040 for FSC and are av ailable at Cisco.
20 Release Notes for the Cisco Catalyst Blade Switch 3040 for FSC, Cisco IOS Release 12.2(35)SE OL-12212-01 Documentation Feedback The Product Documentation D VD is created and released regularly . D VDs are a vailable singly or by subscription. Registered Cisco.
21 Release Notes for the Cisco Catalyst Blade Switch 3040 for FSC, Cisco IOS Release 12.2(35)SE OL-12212-01 Product Alerts and Field Notices Reporting Security Problems in Cisco Products Cisco is committed to deli vering secure products. W e test our products internally before we release them, and we striv e to correct all vulnerabilities quickly .
22 Release Notes for the Cisco Catalyst Blade Switch 3040 for FSC, Cisco IOS Release 12.2(35)SE OL-12212-01 Obtaining Technical Assistance Obtaining Technical Assistance Cisco T echnical Support provides 24-hour -a-day award-winning technical assistance.
23 Release Notes for the Cisco Catalyst Blade Switch 3040 for FSC, Cisco IOS Release 12.2(35)SE OL-12212-01 Obtaining Additional Publications and Information Submitting a Service Request Using the online T AC Service Request T ool is the fastest way to open S3 and S4 service requests.
24 Release Notes for the Cisco Catalyst Blade Switch 3040 for FSC, Cisco IOS Release 12.2(35)SE OL-12212-01 Obtaining Additional Publications and Information • The Cisco Pr oduct Quic k Refer ence G.
25 Release Notes for the Cisco Catalyst Blade Switch 3040 for FSC, Cisco IOS Release 12.2(35)SE OL-12212-01 Obtaining Additional Publications and Information This document is to be used in conjunction with the documents listed in the “Related Documentation” section.
26 Release Notes for the Cisco Catalyst Blade Switch 3040 for FSC, Cisco IOS Release 12.2(35)SE OL-12212-01 Obtaining Additional Publications and Information.
Ein wichtiger Punkt beim Kauf des Geräts Cisco Systems 12.2(35)SE (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Cisco Systems 12.2(35)SE noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Cisco Systems 12.2(35)SE - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Cisco Systems 12.2(35)SE reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Cisco Systems 12.2(35)SE erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Cisco Systems 12.2(35)SE besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Cisco Systems 12.2(35)SE verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Cisco Systems 12.2(35)SE. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Cisco Systems 12.2(35)SE gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
