Benutzeranleitung / Produktwartung (VIP6-80) des Produzenten Cisco Systems
Zur Seite of 40
Corporate Headquarters: Copyright © 2003 Cisco Systems, Inc. All rights reserved. Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA Versatile Interface Processor (VIP6-80) Insta.
2 Versatile Interface Processor (VIP6-80) Installation and Configuration Guide OL-5078-01 • Guidelines for Remo v al and Installation, page 15 • Removing a VIP6-80, page 18 • Removing and I nsta.
3 Versatile Interfa ce Processor (VIP6-80) Installation and Configuration Guide OL-5078-01 – Re gulatory Compliance an d Safety Information for the Cisco 7500 Series Routers onlin e at http://www .cisco.com/u niv ercd/cc/td/doc/prod uct/core/cis7505/4194p c75.
4 Versatile Interface Processor (VIP6-80) Installation and Configuration Guide OL-5078-01 The VIP6-80 installs in any of the follo wing interface proc essor slots on your router: • Slots 0, 1, 2, 3,.
5 Versatile Interfa ce Processor (VIP6-80) Installation and Configuration Guide OL-5078-01 Figur e 1 VIP6-80 CPU Memory Components Y ou can use any co mbination of a vailab le CPU memory configuratio ns and packet memory configurations on th e VIP6-80.
6 Versatile Interface Processor (VIP6-80) Installation and Configuration Guide OL-5078-01 LEDs The VIP6-80 has LEDs; ho wev er , they are not be visible once the VIP is installed in the Cisco 7500 or the Cisco 7000 router . The port adapters that f it into the VIP do ha ve visible LEDs.
7 Versatile Interfa ce Processor (VIP6-80) Installation and Configuration Guide OL-5078-01 The VIP6-80 R OM monitor fu nctions similarly to the boot loader i mage on the RSP , which runs a copy of the Cisco IOS image. The boot loader image allo ws th e router to access the Cisco IOS image when po wering up or initial izing the system.
8 Versatile Interface Processor (VIP6-80) Installation and Configuration Guide OL-5078-01 P A-2FE-FX Dual-Port Fast Ethernet 100BaseFX 2 Single P A-4E Ethernet 10BaseT 4 Single P A-8E Ethernet 10BaseT.
9 Versatile Interfa ce Processor (VIP6-80) Installation and Configuration Guide OL-5078-01 Note All interface processors are dual-width. For more information on the a v ailable port adapters, interface processors, and se rvice adapters supported by the VIP6-80, refer to the Cisco Pr o duct Catalog onlin e, or contact a Cisco sales representative.
10 Versatile Interface Processor (VIP6-80) Installation and Configuration Guide OL-5078-01 Traffic Management The VIP6-80 supports the foll owing: • Simple Network Manageme nt Protocol (SNMP) agent .
11 Versatile Interfa ce Processor (VIP6-80) Installation and Configuration Guide OL-5078-01 • Cisco 7000 series routers with the 7000 Series Route Switch Processor (RSP7000) and 7000 Series Chassis .
12 Versatile Interface Processor (VIP6-80) Installation and Configuration Guide OL-5078-01 Safety Warnings Safety warnings appear throu ghout this publication i n procedures that, if performed incorrectly , may harm you. A warning s ymbol pre cedes each warning statement.
13 Versatile Interfa ce Processor (VIP6-80) Installation and Configuration Guide OL-5078-01 Electrical Equipment Guidelines Follo w these basic guidelines when working with any electrical equipment: .
14 Versatile Interface Processor (VIP6-80) Installation and Configuration Guide OL-5078-01 Preventing Electrostatic Discharge Damage Electrostatic disc harge (ESD) damage, which ca n oc cur when electr onic cards or compon ents are improperly handled, result s in complete or intermittent f ailures.
15 Versatile Interfa ce Processor (VIP6-80) Installation and Configuration Guide OL-5078-01 Guidelines for Removal and Installation This section describes the corr ect procedures to a void un necessary board failures. Note The VIP6-80 installation is the same for each ro uter model, except where o therwise noted.
16 Versatile Interface Processor (VIP6-80) Installation and Configuration Guide OL-5078-01 Figur e 2 Handling Int erf ace Pr ocessors—V ertical Or ientation Sho wn H1355a.
17 Versatile Interfa ce Processor (VIP6-80) Installation and Configuration Guide OL-5078-01 Figure 3 sho ws a detail of th e ejector lev er mechanism on th e ends of the VIP .
18 Versatile Interface Processor (VIP6-80) Installation and Configuration Guide OL-5078-01 Removing a VIP6-80 This section descri bes the procedure for removi ng a VIP6-80.
19 Versatile Interfa ce Processor (VIP6-80) Installation and Configuration Guide OL-5078-01 Step 5 Place the remov ed board on an antistatic mat o r foam pad, or place it in an antist atic container if you plan to return it to the f actory . This completes the procedure for re moving a VIP6-80.
20 Versatile Interface Processor (VIP6-80) Installation and Configuration Guide OL-5078-01 Figur e 4 Handling a P ort A dapter Single-Width Port Adapter Single-width p ort adapters occupy one of the tw o port adapter slots on a VIP6- 80.
21 Versatile Interfa ce Processor (VIP6-80) Installation and Configuration Guide OL-5078-01 Figur e 5 Remo ving and Installing a Single-Wid th P ort A dapter Note: You must first remove the VIP from the chassis before removing a port adapter from the VIP.
22 Versatile Interface Processor (VIP6-80) Installation and Configuration Guide OL-5078-01 Dual-Width Port Adapter Dual-width port adapters occupy both port adapter slots on a VIP6-80. Before you can install a dual-width port adapter , first re mov e the slot di vider located between the two port adapter slots.
23 Versatile Interfa ce Processor (VIP6-80) Installation and Configuration Guide OL-5078-01 Figur e 7 Removing and Installing a Dual-Width P or t A dapter Note: You must first remove the VIP from the chassis before removing the dual-width port adapter from the VIP.
24 Versatile Interface Processor (VIP6-80) Installation and Configuration Guide OL-5078-01 Connecting Cables to the Port Adapter Refer to the Installation and Confi guration Guide th at shipped with yo ur specif ic port adapter fo r cabling instructio ns.
25 Versatile Interfa ce Processor (VIP6-80) Installation and Configuration Guide OL-5078-01 Step 6 Using your t humbs, simul taneously pu sh both eject o r le vers inwa rd until the VIP6-80 is pushed entirely into its slot. (See Figure 3 c.) Step 7 T ighten both of the capti v e installation scre ws to ensure proper EMI isol ation for the router .
26 Versatile Interface Processor (VIP6-80) Installation and Configuration Guide OL-5078-01 Checking the VIP6-80 Installation This section describes the pr ocedures you can use to v erify your VIP6-80 .
27 Versatile Interfa ce Processor (VIP6-80) Installation and Configuration Guide OL-5078-01 %LINK-5-CHANGED: Interface GigabitEthernet3/0/0, changed state to administratively down Use the follo wing p.
28 Versatile Interface Processor (VIP6-80) Installation and Configuration Guide OL-5078-01 Step 9 Repeat Step 1 through Step 8 to verify that an y additional VIP6-80s are properl y installed.
29 Versatile Interfa ce Processor (VIP6-80) Installation and Configuration Guide OL-5078-01 Using show Commands to Display Interface Information This section descri bes using show commands to display i nterface information.
30 Versatile Interface Processor (VIP6-80) Installation and Configuration Guide OL-5078-01 T o display hardw are information about a specif ic interf ace on a VIP6-80 port adapter , append the type ar.
31 Versatile Interfa ce Processor (VIP6-80) Installation and Configuration Guide OL-5078-01 EEPROM format version 1 VIP6 RM7000B controller, FRU:VIP6, HW rev 2.
32 Versatile Interface Processor (VIP6-80) Installation and Configuration Guide OL-5078-01 Follo wing is an example of a successful ping command to a remote serv er with the IP address 10.1.1.60: Router# ping 10.1.1.60 <Return> Type escape sequence to abort.
33 Versatile Interfa ce Processor (VIP6-80) Installation and Configuration Guide OL-5078-01 Note In the output displa y of the show diag command (see page 30 ), the line that b egins with Contr oller Memory Size shows the amou nt of memory installed on the VIP6-80.
34 Versatile Interface Processor (VIP6-80) Installation and Configuration Guide OL-5078-01 Removing SDRAM DIMMs Use the follo wing procedure to remo ve the e xisting DIMMs: Step 1 T urn of f the system po wer and remov e the VIP6-80 from the system. (Fo llow th e steps in the “Removing a VIP6-80” s ection on page 18 .
35 Versatile Interfa ce Processor (VIP6-80) Installation and Configuration Guide OL-5078-01 Step 8 Repeat Step 4 through Step 7 for the remaining DIMM, if required for your upgrade.
36 Versatile Interface Processor (VIP6-80) Installation and Configuration Guide OL-5078-01 Checking the VIP6-80 Memory Upgrade This section descri bes how you w ould veri fy the memory upgrade. • Observe the LED states and the console display . As the system reinitializes the interf aces, the enabled LEDs on the VIP6-80 P A s should go on .
37 Versatile Interfa ce Processor (VIP6-80) Installation and Configuration Guide OL-5078-01 • Remov e and reinstall the port adapters. See the “Removing and Installing Port Adapters” section on page 19 . Obtaining Documentation Cisco provid es sev eral ways to obtain documentat ion, technical assistance, and other technical resources.
38 Versatile Interface Processor (VIP6-80) Installation and Configuration Guide OL-5078-01 Documentation Feedback Y ou can submit comments electro nically on Cisco.com. On the Cisco Documentation ho me page, click Feedback at th e top of the page. Y ou can send your comments in e-mail to b ug-doc@cisco.
39 Versatile Interfa ce Processor (VIP6-80) Installation and Configuration Guide OL-5078-01 T o open a case b y telephone, use one of the follo wing numbers: Asia-Pacif ic: +61 2 8446 741 1 (Australia: 1 800 805 227) EMEA: +32 2 704 55 55 USA: 1 800 553-2 447 For a complete listing of Cisco T AC contacts, go to t his URL: http://www .
40 Versatile Interface Processor (VIP6-80) Installation and Configuration Guide OL-5078-01 • Internet Protocol Journal is a quarterly journal published b y Cisco Systems for engineering professionals in v olved in designing, de velop ing, and operating public and p riv ate internets and intranets.
Ein wichtiger Punkt beim Kauf des Geräts Cisco Systems (VIP6-80) (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Cisco Systems (VIP6-80) noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Cisco Systems (VIP6-80) - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Cisco Systems (VIP6-80) reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Cisco Systems (VIP6-80) erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Cisco Systems (VIP6-80) besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Cisco Systems (VIP6-80) verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Cisco Systems (VIP6-80). Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Cisco Systems (VIP6-80) gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
