Benutzeranleitung / Produktwartung 3200 des Produzenten Cisco
Zur Seite of 282
Americas Hea dquarters Cisc o Syst ems , Inc . 170 West Ta sman Driv e San Jos e, CA 95 134-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553- NETS (638 7) Fax: 408 527-0883 Cisco T elePresence.
THE SPECIFICATIONS AND INFORMATION REGARDING TH E PRODUCTS IN THIS MANUAL ARE SUBJE CT TO CHANGE WITHOUT NO TICE. ALL STATEMENT S, INFORMATI ON, AND RE COMMENDATIONS IN T HIS MA NUAL ARE BELI EVED TO BE ACCURATE BUT ARE P RESENTED WITHOUT WARRANTY OF ANY KIND, EXPRE SS OR IMPLIED.
Content s iii Cisco T elePresen ce System 3200 OL-14521-01 Preface ix Introd uct ion i-ix Conv enti ons i-ix Obtain ing Docu mentat ion, Obt aining Su pport , and Secur ity Gui deline s i-x Relat ed D.
Cont ent s iv Cisco Tele Presence Syste m 3200 OL-14521-01 CHAPTER 9 Routing Power and Signal Cables 9-1 Parts Li st 9-1 Powe r Req uire ment s for th e Cisc o TelePres ence 320 0 9-2 CHAPTER 10 First.
Content s v Cisco T elePresen ce System 3200 OL-14521-01 Removing a D isplay Shel f 12-8 Removing the Displ ay Scree n and Complet ing the Pr ocedu re 12-9 Replac ing a Spe aker—Par t Number C TS-LD.
Cont ent s vi Cisco Tele Presence Syste m 3200 OL-14521-01 Carton 2 of 58: Mech anical Accesso ry Kit, 53 -2855 -xx, CTS3K -ACC2- KIT A-3 Carton 3 o f 58 : Prima ry C odec, CTS-CODEC -PRI- G2, 800-306.
Content s vii Cisco T elePresen ce System 3200 OL-14521-01 Carton 38 of 5 8: Pres entat ion Co dec, 69 -1887 -xx, CTS-HFR- COLLAB- 3K A-13 Carton 39 of 58: Spare Fluor escen t Bulb s for Ligh t Fixt u.
Cont ent s viii Cisco Tele Presence Syste m 3200 OL-14521-01 CHAPTER C Cisco Tele Presence Syst em 3200 P allet Dimension s and Descri ption C-1.
ix Cisco T elePresen ce System 3200 OL-14521-01 Preface Revised: July 28 , 2008, OL-14521-0 1 Introduction The Cisco T elePr esence 320 0 Assembly Gui de ou tline s the s teps a nd be st p ractices for asse mbling and installing the Cisco T elePresence 3200.
x Cisco Tele Presence Syste m 3200 OL-14521-01 Preface Obtaining D ocumentat ion, Obtai ning Suppor t, and Secur ity Gui delines Ti p Means the inf ormation cont ains useful tips.
CH A P T E R 1-1 Cisco TelePre sence System 3200 OL-14521-01 1 Overview Revised: July 28 , 2008, OL-14521-0 1 Chapter Organization Chapter 1, “Overview” (this chapter ) • Provides c hapter organization and content of th is do cument and a n overview of the steps y ou perform to install a CTS 3200 syste m.
1-2 Cisco Tele Presence Syste m 3200 OL-14521-01 Ch apter 1 Ov erv iew Chapter Organiza tion Chap ter 7, “Bui ldin g the Seco nd Row Tab le Ass embly” • This ch apter de scri bes ho w to b uild the second ro w table and is or ganized the same as Cha pter 2 .
1-3 Cisco TelePre sence System 3200 OL-14521-01 Chapter 1 Overview Conventi ons and Te rminol ogy Step 2 Install and co nnect the PDUs for the display an d f irst ro w table assem bly .
1-4 Cisco Tele Presence Syste m 3200 OL-14521-01 Ch apter 1 Ov erv iew Tools and Equ ipm ent List • Larg e Phillips scre wd ri ve r • T i n snips* • Palle t jack o r hand cart ( for mo ving comp.
CH A P T E R 2-1 Cisco TelePre sence System 3200 OL-14521-01 2 Building the Display Assembly Revised: Februar y 10, 2010, OL-14521 -01 Parts List Key Part De scrip tion Part Nu mber Qty Ctn Notes 1 Di.
2-2 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 2 Building the Display Assembly Parts Li st Cautio n The disp lay stru ctures are unstabl e durin g assemb ly . Use c aution , and suppor t all struc tures as re quired . Cautio n Some system component s hav e metal and plas tic edges with hard angl es.
2-3 Cisco TelePre sence System 3200 OL-14521-01 Chapter 2 Buildin g the Dis play Assem bly Parts List Step 2 Attach th e Codec Safety tra ys to the Front F oot stab ilizers . Note If you ordere d a Presen tation Cod ec, atta ch the lar ger tra y that comes with the Pres entation Codec packag e, p art no .
2-4 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 2 Building the Display Assembly Parts Li st Step 3 Attach the Rear and Front Foot stabi lizers to the Display structur es.
2-5 Cisco TelePre sence System 3200 OL-14521-01 Chapter 2 Buildin g the Dis play Assem bly Parts List Step 4 Attach the left and right Display Shel f supports t o each Displa y structure.
2-6 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 2 Building the Display Assembly Parts Li st Step 5 Attach the D isplay T ilt brac ket s to e ach Disp lay st ructure. Figur e 2-4 Displa y Tilt brac k ets Note Do not tighten the Disp lay T ilt brackets.
2-7 Cisco TelePre sence System 3200 OL-14521-01 Chapter 2 Buildin g the Dis play Assem bly Parts List Step 6 Attach the Camera As sembly br acket to the center Dis play stru cture, making sur e that this s truct ure use s the lar g er code c tray .
2-8 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 2 Building the Display Assembly Parts Li st Step 7 Attach t he upp er and lower Suppor t crossba rs to t he left an d right Display structur es.
2-9 Cisco TelePre sence System 3200 OL-14521-01 Chapter 2 Buildin g the Dis play Assem bly Parts List Step 8 Attach t he upp er and lower Suppor t crossba rs to the cent er Displ ay struc ture. Figur e 2-7 Upper and Low er Support cr ossbars Ti p Use the screw holes near est the ends of the Support cro ssbars.
2-10 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 2 Building the Display Assembly Parts Li st Step 9 Position the three Disp lay structu res relati ve to the r ear w all. Note Using the measur ements p rov ided i n Figure 2-8 , there will be approximate ly 3 inches (8 cm) of space between the light reflector and t he wal l.
CH A P T E R 3-1 Cisco TelePre sence System 3200 OL-14521-01 3 Mounting and Leveling the Plasma Displays Revised: September 16, 2009, OL-1 4521-01 Parts List War ni n g Only trained and qualified personnel s hould be allowed to install , replace, or service this equipment.
3-2 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 3 Mounting and Leveling the Plasma Displays Parts Li st Note Figur e 3-3 thr ough Figu re 3- 8 illustrat e the process of l e veling t he Pla sma disp lays. Y o u may want to re vie w all of this chap ter be fore be ginning the le v eling process.
3-3 Cisco TelePre sence System 3200 OL-14521-01 Chapter 3 Mounting and L eveling the Plasma Display s Purpose of Leveling th e Plasm a displays War ni n g The display s are heavy and may cause injury or damage if care is not taken to support them properly while mounting.
3-4 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 3 Mounting and Leveling the Plasma Displays Purpose of Le veling t he Plasm a displays Leveling Alignment Points Step 3 Use the le velin g alignmen t points to le ve l and align the Plasm a displays.
3-5 Cisco TelePre sence System 3200 OL-14521-01 Chapter 3 Mounting and L eveling the Plasma Display s Purpose of Leveling th e Plasm a displays The le veling goals illu strated in Figure 3-4 throug h Figure 3-8 show ho w to use the le veling alig nment points in Figure 3-3 .
3-6 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 3 Mounting and Leveling the Plasma Displays Purpose of Le veling t he Plasm a displays Figur e 3-5 Mak e sure no lines of r esolution ar e bloc k ed b y the Displa y shelves Step 6 Use the Plasma displa y Le v eling fee t to le vel the Pla sma disp lays along t he X axis.
3-7 Cisco TelePre sence System 3200 OL-14521-01 Chapter 3 Mounting and L eveling the Plasma Display s Purpose of Leveling th e Plasm a displays Figur e 3-6 Lev el th e Plasma di spla ys alon g the X and Y ax es Cautio n Do not place the le vel against the Pla sma display screen.
3-8 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 3 Mounting and Leveling the Plasma Displays Purpose of Le veling t he Plasm a displays Figur e 3-7 Align the edges of Plasma displa ys Step 8 Align th e seams of the Disp lay shelv es with the s eams between Plasma displa ys.
3-9 Cisco TelePre sence System 3200 OL-14521-01 Chapter 3 Mounting and L eveling the Plasma Display s Purpose of Leveling th e Plasm a displays Caution W hile moving the Plasma display to the left or right you ne ed to make sure the Pl asma display Lev elin g feet remain f irmly sea ted on top of th e Displa y shelf suppo rts.
3-10 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 3 Mounting and Leveling the Plasma Displays Purpose of Le veling t he Plasm a displays Figur e 3-9 Apply the B lack B uff er strips 201119.
CH A P T E R 4-1 Cisco TelePre sence System 3200 OL-14521-01 4 Building the Display Shelf Assembly Revised: September 16, 2009, OL-1 4521-01 Parts List Display Shelf, T ype 1 Key Part Descr iption Par.
4-2 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 4 Building the Display Shelf Assembly Part s List Cautio n The shel f segments are un stable dur ing assem bly . Use caution, and suppor t all struct ures as req uired. Cautio n Some system component s hav e metal and plas tic edges with hard angl es.
4-3 Cisco TelePre sence System 3200 OL-14521-01 Chapter 4 Buildin g the Dis play She lf Asse mbly Parts List Step 1 Attach the D isplay sh elf har dwar e.
4-4 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 4 Building the Display Shelf Assembly Part s List Step 2 Attach the l eft Di splay s helf. Figur e 4-2 Lef t Dis pla y shelf 201148 1 13 13.
4-5 Cisco TelePre sence System 3200 OL-14521-01 Chapter 4 Buildin g the Dis play She lf Asse mbly Parts List Step 3 Attach the c enter D isplay s helf Figur e 4-3 Cent er Displ a y shelf Note Refer to Figure 4-1 to see the h ardw are us ed to atta ch the cent er Di splay she lf to t he left Disp lay shelf.
4-6 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 4 Building the Display Shelf Assembly Part s List Step 4 Attach the r ight Di splay shelf. Figur e 4-4 Right Displa y shelf Note Refer to Figure 4-1 to see the hardwar e used to attach the righ t Display shelf to the cente r Display shelf.
4-7 Cisco TelePre sence System 3200 OL-14521-01 Chapter 4 Buildin g the Dis play She lf Asse mbly Parts List Step 5 Attach the screen sup ports to th e access ory cab inets an d position, but do not a.
4-8 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 4 Building the Display Shelf Assembly Part s List.
CH A P T E R 5-1 Cisco TelePre sence System 3200 OL-14521-01 5 Building the Lightin g Assembly Revised: September 16, 2009, OL-1 4521-01 Parts List Key Part Description Part Number Qty Ctn No tes 1 Li.
5-2 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 5 Building the Lighting Assembly Parts Li st War ni n g Only trained and qualified personnel s hould be allowed to install , replace, or service this equipment. Cautio n Metal and plastic edge s can be sharp.
5-3 Cisco TelePre sence System 3200 OL-14521-01 Chapter 5 Building th e Lighti ng Assemb ly Parts List Step 1 Assemble the six Suppor t struts and si x Lighti ng Suppor t brac kets.
5-4 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 5 Building the Lighting Assembly Parts Li st Step 2 Attach the left and ri ght outer Supp ort brac kets (from Figure 5-1 ) to the horizontal ba r on the left and right Display structures.
5-5 Cisco TelePre sence System 3200 OL-14521-01 Chapter 5 Building th e Lighti ng Assemb ly Parts List Step 3 Attach the four inne r Support bra ckets to the Supp ort crossb ars. Figur e 5-3 Fou r inner Suppo rt br ack ets (fr om Fi gure 5-1 ) Note Use any of t he six b rackets that y ou assemb led in Step 1 .
5-6 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 5 Building the Lighting Assembly Parts Li st Step 4 Attach th e four En d struc ture bra ckets to the ends of the Suppo rt cross bars.
5-7 Cisco TelePre sence System 3200 OL-14521-01 Chapter 5 Building th e Lighti ng Assemb ly Parts List Step 5 Attach th e three Refl ector botto m trays to th e Support br acket s.
5-8 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 5 Building the Lighting Assembly Parts Li st Step 6 Attach the t wo Reflector bottom spacers to join the three Refl ector bottom tray s.
5-9 Cisco TelePre sence System 3200 OL-14521-01 Chapter 5 Building th e Lighti ng Assemb ly Parts List Step 7 Attach the l eft and righ t (v ertical) Reflec tor Bottom e nds t o the End Str ucture brack ets and att ach t he complian ce sticke r to the left reflector bottom end.
5-10 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 5 Building the Lighting Assembly Parts Li st Step 8 Attach the Light Cup brac ket to the l eft and rig ht (v ertical) Reflecto r Bottom e nds.
5-11 Cisco TelePre sence System 3200 OL-14521-01 Chapter 5 Building th e Lighti ng Assemb ly Parts List Step 9 Attach the three 5-foot Light f ixtures inside th e Reflector bottoms.
5-12 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 5 Building the Lighting Assembly Parts Li st Step 10 Attach the l eft and rig ht 4-foot Side L ight f ixtures to the left and right (v ertica l) Reflector Bottom ends.
5-13 Cisco TelePre sence System 3200 OL-14521-01 Chapter 5 Building th e Lighti ng Assemb ly Parts List Step 11 Attach th e two center Met al T rim panels.
5-14 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 5 Building the Lighting Assembly Parts Li st Step 12 Attach the tw o side Meta l T rim panels.
5-15 Cisco TelePre sence System 3200 OL-14521-01 Chapter 5 Building th e Lighti ng Assemb ly Parts List Step 13 Attach the cen ter Pl astic Di ff user panel.
5-16 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 5 Building the Lighting Assembly Parts Li st Step 14 Attach the lef t and right plastic dif fuser panels. Bef ore fully tight ening the scre ws, adj ust the panels to the left or right to ens ure that the spa cing betwe en the dif fuser panels are e v en.
5-17 Cisco TelePre sence System 3200 OL-14521-01 Chapter 5 Building th e Lighti ng Assemb ly Parts List Step 15 Attach the fo ur L- brack ets to the tw o (ver tical) e nd Plastic Dif fuser panels.
5-18 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 5 Building the Lighting Assembly Parts Li st Step 16 Attach the t wo (v ertical) Plastic D iff user panels to the End Stru cture b rack ets.
5-19 Cisco TelePre sence System 3200 OL-14521-01 Chapter 5 Building th e Lighti ng Assemb ly Parts List Step 17 Slide the Plast ic Dif fuser Panel br ace betwee n the end (v ertical) Plasti c Dif fuser panel and the left an d right Plastic Dif fuser panels.
5-20 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 5 Building the Lighting Assembly Parts Li st Step 18 Attach the cent er Reflecto r top to the c enter Refle ctor bott om. Figur e 5-1 8 Center Reflect o r top Note Do not tighten scre ws until co mpleting Step 22 .
5-21 Cisco TelePre sence System 3200 OL-14521-01 Chapter 5 Building th e Lighti ng Assemb ly Parts List Step 19 Attach the lef t and rig ht Refle ctor tops to the le ft and r ight Ref lector botto ms. Figur e 5-1 9 Left and Right Refle ct or top s Note Do not tighten scre ws until co mpleting Step 22 .
5-22 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 5 Building the Lighting Assembly Parts Li st Step 20 Join the left, c enter , and righ t Reflector tops with the left and rig ht Reflec tor T ransition pieces. Figur e 5-2 0 Lef t and Righ t Reflect or T r ansition pieces Note Do not tighten scre ws until co mpleting Step 22 .
5-23 Cisco TelePre sence System 3200 OL-14521-01 Chapter 5 Building th e Lighti ng Assemb ly Parts List Step 21 Attach the l eft and righ t (v ertical) Reflec tor en ds to the le ft and right (ve rtical ) Ref lector Bottom ends. Figur e 5-2 1 Lef t and Righ t (v ertic al) Reflect or ends Note Do not tighten scre ws until co mpleting Step 22 .
5-24 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 5 Building the Lighting Assembly Parts Li st Step 22 Attach the l eft and r ight c orner Reflecto r T ransition p ieces t o the Reflector tops. Figur e 5-2 2 Lef t and Righ t cor ner Reflect or T ran sitio n pieces Note T ighten all scre ws from Figure 5-18 thro ugh Figure 5-2 2 .
5-25 Cisco TelePre sence System 3200 OL-14521-01 Chapter 5 Building th e Lighti ng Assemb ly Parts List Step 23 Attach the tw o Metal T rim panels to th e L-brack ets attac hed to the tw o (v ertical) Plastic Dif fuser panels. Figur e 5-2 3 T wo Metal T r im panels Note Install the code cs before you contin ue to the ne xt chapter .
5-26 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 5 Building the Lighting Assembly Parts Li st Ti p If requi red, use t he whi te touch- up paint on the lig ht reflec tors to fix any minor cosme tic issue s caused by assembly , shi pping, or handling.
CH A P T E R 6-1 Cisco TelePre sence System 3200 OL-14521-01 6 Building the First Row Table Assembly Revised: October 29, 2009, OL- 14521-01 Parts List Key Part Descr iption Part Numbe r Qty Ctn Notes.
6-2 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 6 Building the First Row Table Assembly Parts Li st Cautio n The tab le segments are unstabl e during asse mbly . Use cauti on, and suppor t all stru ctures a s require d. Cautio n Some system component s hav e metal and plas tic edges with hard angl es.
6-3 Cisco TelePre sence System 3200 OL-14521-01 Chapter 6 Buildin g the Firs t Row Table As sembl y Parts List Cautio n T ab le eleme nts are he avy , and met al edges can be very sharp. Pro tect your hands and eyes from i njury by wearing safety glov es and glasses.
6-4 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 6 Building the First Row Table Assembly Parts Li st Figur e 6-2 Fou r Mold ed fo am bumper s and t he f our T able leg b ases Note The leg base with only one top ri ght attachment brack et is the left most table le g (see Figure 6-12 ).
6-5 Cisco TelePre sence System 3200 OL-14521-01 Chapter 6 Buildin g the Firs t Row Table As sembl y Parts List Figur e 6-3 Foa m Bumper A ssembly Note St eps f or rou tin g th e Ethe rnet an d power ca bles are in Cha pter 9, “Routing Po wer and Sig nal Cable s.
6-6 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 6 Building the First Row Table Assembly Parts Li st Figur e 6-4 Foa m Bumper A ssembly Note St eps f or rou tin g th e Ethe rnet an d power ca bles are in Cha pter 9, “Routing Po wer and Sig nal Cable s.
6-7 Cisco TelePre sence System 3200 OL-14521-01 Chapter 6 Buildin g the Firs t Row Table As sembl y Parts List Figur e 6-5 Right Wing T ablet op Sectio n Step 6 Attach the r ight T able se gme nt. a. Make sur e you tighte n the draw b olt evenly on b oth sides .
6-8 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 6 Building the First Row Table Assembly Parts Li st Figur e 6-6 Right T able segme nt Note The splines hav e dif ferent lengths. Use a spli ne that is slightly smaller than the slot in the table top.
6-9 Cisco TelePre sence System 3200 OL-14521-01 Chapter 6 Buildin g the Firs t Row Table As sembl y Parts List Figur e 6-7 r igh t Most T able Leg Step 8 Attach the c enter T able se gment . a. Make sur e you tighte n the draw b olt evenly on b oth sides .
6-10 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 6 Building the First Row Table Assembly Parts Li st d. While on e pe rson is tight ening the dr aw bolt f rom b elow , it i s impor tant for the suppo rt p erson t o maintain the alig nment of the table se gment edges.
6-11 Cisco TelePre sence System 3200 OL-14521-01 Chapter 6 Buildin g the Firs t Row Table As sembl y Parts List Figur e 6-9 r ight cen ter T abl e le g Step 10 Attach th e lef t T able se gment. a. The dra w bolt s ha ve tw o halv es that scr e w into a center p iece.
6-12 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 6 Building the First Row Table Assembly Parts Li st b. While a draw bolt is being t ightene d, hold the tab le edg es togeth er to avoid damage to the d raw bolt or the table s egm ent. c. T ig hten th e draw bolts so t he two table segmen ts are con nected sn ugly .
6-13 Cisco TelePre sence System 3200 OL-14521-01 Chapter 6 Buildin g the Firs t Row Table As sembl y Parts List Figur e 6-1 1 Le ft center T abl e le g Step 12 Attach th e left most T able le g.
6-14 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 6 Building the First Row Table Assembly Parts Li st Figur e 6-1 2 lef t Most T able Leg Step 13 Attach on e mi croph one to the le ft, ri ght a nd cent er f irst ro w ta ble se gments.
6-15 Cisco TelePre sence System 3200 OL-14521-01 Chapter 6 Buildin g the Firs t Row Table As sembl y Parts List Note Step s for rout ing and connec ting the m icropho ne exten sion ca bles f rom the au dio/vide o extension uni t and co dec to the microph ones ar e in Chapte r 9, “Rou ting Po we r and Sig nal Cabl es.
6-16 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 6 Building the First Row Table Assembly Parts Li st Figur e 6-1 4 Lef t co nnecting T ablet op sec tion Step 15 Attach th e center Pri v ac y pan el.
6-17 Cisco TelePre sence System 3200 OL-14521-01 Chapter 6 Buildin g the Firs t Row Table As sembl y Parts List Figur e 6-1 5 Pr iv acy P anel Assembly Step 16 Attach th e left Pr i v ac y panel.
6-18 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 6 Building the First Row Table Assembly Parts Li st Figur e 6-1 6 Pr iv acy P anel Assembly Step 17 Attac h the right Privac y panel.
6-19 Cisco TelePre sence System 3200 OL-14521-01 Chapter 6 Buildin g the Firs t Row Table As sembl y Parts List Figur e 6-1 7 Pr iv acy P anel Assembly Step 18 Atta ch the right w ing Priv acy panel.
6-20 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 6 Building the First Row Table Assembly Parts Li st Figur e 6-1 8 Pr iv acy P anel Assembly 4 5 201174.
CH A P T E R 7-1 Cisco TelePre sence System 3200 OL-14521-01 7 Building the Second Ro w Table Assembly Revised: October 29, 2009, OL- 14521-01 Table Numbe ring Information Used in This Chapter The ta ble tops a nd privac y panels are nu mbered to assist you in i nstal lation .
7-2 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 7 Building the Second Row Table Assemb ly Parts Li st 5 Gutter and priv acy panel su pport bra cket, type 2 700-272 79-xx 5 50 6 Gutter pane l,.
7-3 Cisco TelePre sence System 3200 OL-14521-01 Chapter 7 Building the Seco nd Row Ta ble Assem bly Parts List 31 Priv a cy panel, section 5 (secti ons 2 and 7) 800-31121- xx 2 50 32 Priv a cy Panel, .
7-4 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 7 Building the Second Row Table Assemb ly Parts Li st Cautio n The tab le segments are unstabl e during asse mbly . Use cauti on, and suppor t all stru ctures a s require d. Cautio n Some system component s hav e metal and plas tic edges with hard angl es.
7-5 Cisco TelePre sence System 3200 OL-14521-01 Chapter 7 Building the Seco nd Row Ta ble Assem bly Parts List Figur e 7 -1 Metal p ack aging brace s and th eir Molde d f oam bump ers Step 2 Assemble the se ven Molded foam b umpers and the se ven T able leg bases.
7-6 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 7 Building the Second Row Table Assemb ly Parts Li st Figur e 7 -2 F our Mold ed f oam bum pers and t he f our T able leg b ases Step 3 Attach the first set of suppor t brackets for the gutt er and priv acy panel to the t able legs.
7-7 Cisco TelePre sence System 3200 OL-14521-01 Chapter 7 Building the Seco nd Row Ta ble Assem bly Parts List Figur e 7 -3 Gut te r and Pr iv ac y P anel Suppor t Br ack ets, T ype 1 Step 4 Attach th e second set of f iv e support brack ets to the table leg s.
7-8 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 7 Building the Second Row Table Assemb ly Parts Li st Figur e 7 -4 Gut te r and Pr iva cy P anel Suppor t Br ac k ets, T ype 2 Step 5 While one or more assistants k eep the table legs steady , attach the section 1 (sect ion 5) gutter panel to the section 1 (secti on 5) table le gs.
7-9 Cisco TelePre sence System 3200 OL-14521-01 Chapter 7 Building the Seco nd Row Ta ble Assem bly Parts List Figur e 7 -5 Section 1 (Sectio n 5) Gu t t er P anel Step 6 Attach th e section 2 (section 4) gutt er panel to the sectio n 2 (section 4) table le gs.
7-10 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 7 Building the Second Row Table Assemb ly Parts Li st Figur e 7 -6 Section 2 (Sectio n 4) Gu t t er P anel Step 7 Attach the Sect ion 3 ( section 6) gu tter pa nel to the Se ction 3 (sectio n 6) table legs.
7-11 Cisco TelePre sence System 3200 OL-14521-01 Chapter 7 Building the Seco nd Row Ta ble Assem bly Parts List Figur e 7 -7 Section 3 (Sectio n 6) Gu t t er P anel Step 8 Attach th e section 4 (section 3) gutt er panel to the sectio n 4 (section 3) table le gs.
7-12 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 7 Building the Second Row Table Assemb ly Parts Li st Figur e 7 -8 Section 4 (Sectio n 3) Gu t t er P anel Step 9 Attach th e left section 5 (sectio n 7) gutter panels to the remaining table legs .
7-13 Cisco TelePre sence System 3200 OL-14521-01 Chapter 7 Building the Seco nd Row Ta ble Assem bly Parts List Figur e 7 -9 Section 5 (Lef t) Gut ter P anels Step 10 Attac h the right section 5 (se ction 2) gut ter pane ls to the r emain ing tabl e legs.
7-14 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 7 Building the Second Row Table Assemb ly Parts Li st Figur e 7 -1 0 Section 5 (Ri ght) Gut te r P a nels Step 11 Assemble the I/O modules for the outside left and outside right molded foam b umpers.
7-15 Cisco TelePre sence System 3200 OL-14521-01 Chapter 7 Building the Seco nd Row Ta ble Assem bly Parts List Figur e 7 -1 1 F oam Bum per Assembly Step 12 Assemble the I/O modules for the inne r molded foam b umpers. Note Th e Ether net ca bles are of different lengths.
7-16 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 7 Building the Second Row Table Assemb ly Parts Li st Figur e 7 -12 Foam Bump er Assem bl y Step 13 Inser t the second row PDUs in the l ower cable gutters. Note Y o u install the remain ing PDUs and ro ute the ca bles in Chapter 9, “Ro uting Power and Signal Cables.
7-17 Cisco TelePre sence System 3200 OL-14521-01 Chapter 7 Building the Seco nd Row Ta ble Assem bly Parts List Note Be fore you att ach the floating br ackets, ro ute the Etherne t and power cables in Chapter 9, “Rout ing Po wer and Signal Cables.
7-18 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 7 Building the Second Row Table Assemb ly Parts Li st Figur e 7 -15 Fl oa ting Brack ets, T ype 2 Step 16 Attach the pr iv acy pan el hanger s to the tabl e assemb ly .
7-19 Cisco TelePre sence System 3200 OL-14521-01 Chapter 7 Building the Seco nd Row Ta ble Assem bly Parts List Step 17 Place the sec tion 1 (sec tion 5) an d secti on 2 (secti on 4) tabletop s on the.
7-20 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 7 Building the Second Row Table Assemb ly Parts Li st • I nsert four woo den biscuits in the slot betwee n the two table secti ons and join the sec tions together , then inse rt and ti ghten th e draw bolts e venly o n each sid e until t he table top sectio ns are joined.
7-21 Cisco TelePre sence System 3200 OL-14521-01 Chapter 7 Building the Seco nd Row Ta ble Assem bly Parts List Figur e 7 -19 T abletop Sec tion 4 (Sec tion 3) Step 20 Place the left tableto p section.
7-22 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 7 Building the Second Row Table Assemb ly Parts Li st Figur e 7 -20 T abletop, Sec tion 5 L ef t (Section 7) Step 21 Place the right tabletop .
7-23 Cisco TelePre sence System 3200 OL-14521-01 Chapter 7 Building the Seco nd Row Ta ble Assem bly Parts List Figur e 7 -21 T abletop, Sec tion 5 Rig ht (Section 2) Step 22 Attac h the left tab letop end t o tabletop sec tion 5 usi ng the using the draw bo lts, splin e or biscuits, an d alignment pla te.
7-24 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 7 Building the Second Row Table Assemb ly Parts Li st Figur e 7 -22 Lef t T abletop End, Dr a w Bolts, Spline and Align ment Plat e Step 23 Atta ch the Right tabl etop en d.
7-25 Cisco TelePre sence System 3200 OL-14521-01 Chapter 7 Building the Seco nd Row Ta ble Assem bly Parts List Figur e 7 -23 Right T abletop End Step 24 Attach tab letop se ctions 1 and 2 to the ta ble l eg.
7-26 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 7 Building the Second Row Table Assemb ly Parts Li st Figur e 7 -24 T abletop Sections 1 and 2 an d T able Leg Step 25 Attach tab letop se ctions 1 and 3 to the ta ble l eg.
7-27 Cisco TelePre sence System 3200 OL-14521-01 Chapter 7 Building the Seco nd Row Ta ble Assem bly Parts List Figur e 7 -25 T abletop Sections 1 and 3 an d T able Leg Step 26 Attach tab letop se ctions 2 and 4 to the ta ble l eg.
7-28 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 7 Building the Second Row Table Assemb ly Parts Li st Figur e 7 -26 T abletop Sections 2 and 4 an d T able Leg Step 27 Attach tab letop se ctions 3 and 5 to the ta ble l eg.
7-29 Cisco TelePre sence System 3200 OL-14521-01 Chapter 7 Building the Seco nd Row Ta ble Assem bly Parts List Figur e 7 -27 T abletop Sections 3 and 5 an d T able Leg Step 28 Attach tab letop se ctions 4 and 5 to the ta ble l eg.
7-30 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 7 Building the Second Row Table Assemb ly Parts Li st Figur e 7 -28 T abletop Sections 4 and 5 an d T able Leg Step 29 Atta ch the re inforc emen t screws for the gutt er pane ls.
7-31 Cisco TelePre sence System 3200 OL-14521-01 Chapter 7 Building the Seco nd Row Ta ble Assem bly Parts List Figur e 7 -29 Gu tter P a nel Rein forcemen t Screws Step 30 Attach the panel end brace to the table le g and lef t tablet op end an d attach the table le g to the tab letop and table top en d.
7-32 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 7 Building the Second Row Table Assemb ly Parts Li st Figur e 7 -30 P anel End Br aces, T able Le g, Lef t T abletop End and T able Section 5 .
7-33 Cisco TelePre sence System 3200 OL-14521-01 Chapter 7 Building the Seco nd Row Ta ble Assem bly Parts List Figur e 7 -31 P anel End Br aces, T able Le g, Right T abletop End and T able Section 5 (Sec tion 2) Step 32 Attach the pri vac y panel alignment bra cket to the under side of table section 1 (section 5).
7-34 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 7 Building the Second Row Table Assemb ly Parts Li st Figur e 7 -33 Section 2 (Sectio n 4) Pr iva c y P anel Alignment Br ack et Step 34 Attach the pri vac y panel alignment bra cket to the under side of table section 3 (section 6).
7-35 Cisco TelePre sence System 3200 OL-14521-01 Chapter 7 Building the Seco nd Row Ta ble Assem bly Parts List Figur e 7 -35 Section 4 (Sectio n 3) Pr iva c y P anel Alignment Br ack et Step 36 Attach the pri vac y panel alignment bra cket to the unders ide of left table section 5 (section 7.
7-36 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 7 Building the Second Row Table Assemb ly Parts Li st Figur e 7 -37 Right Section 5 (Section 2) P r ivac y P anel Alignment Br ack et Step 38 Attach one mi croph one to each tab le seg ment and atta ch the mi crophon e exte nsion cords to the microp hone ca bles .
7-37 Cisco TelePre sence System 3200 OL-14521-01 Chapter 7 Building the Seco nd Row Ta ble Assem bly Parts List Figur e 7 -38 Micr ophone Assembly Step 39 Lift the priv acy panel for table section 1 (.
7-38 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 7 Building the Second Row Table Assemb ly Parts Li st Figur e 7 -39 Section 1 (Se ction 5) Pr iv acy P anel Step 40 Attach the pri vac y panel for section 2 (sect ion 4) to the table assem bly .
7-39 Cisco TelePre sence System 3200 OL-14521-01 Chapter 7 Building the Seco nd Row Ta ble Assem bly Parts List Figur e 7 -40 Section 2 (Se ction 4) Pr iv acy P anel Step 41 Attach the pri vac y panel for section 3 (sect ion 6) to the table assem bly .
7-40 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 7 Building the Second Row Table Assemb ly Parts Li st Figur e 7 -41 Section 3 (Se ction 6) Pr iv acy P anel Step 42 Attach the pri vac y panel for section 4 (sect ion 3) to the table assem bly .
7-41 Cisco TelePre sence System 3200 OL-14521-01 Chapter 7 Building the Seco nd Row Ta ble Assem bly Parts List Figur e 7 -42 Section 4 (Se ction 3) Pr iv acy P anel Step 43 Attach the pri vac y panel for left section 5 to the table assembly .
7-42 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 7 Building the Second Row Table Assemb ly Parts Li st Figur e 7 -43 Le ft Secti on 5 (Sec tio n 2) Priv acy P anel Step 44 Attach the pri vac y panel for right section 5 to the table assembly .
7-43 Cisco TelePre sence System 3200 OL-14521-01 Chapter 7 Building the Seco nd Row Ta ble Assem bly Parts List Figur e 7 -44 Right Section 5 (Section 7) P r ivac y P anel Step 45 Adjust panels until all seams betwee n the panels are e ven , then fully tighten the knob screws.
7-44 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 7 Building the Second Row Table Assemb ly Parts Li st Figur e 7 -45 A djusting the Pr iv acy P anels Step 46 Attach the cab le cov er for the right en d pri v acy panel. Ti p Install the cab le cov er so that it hides the cab les that come out of the right side of the table section.
7-45 Cisco TelePre sence System 3200 OL-14521-01 Chapter 7 Building the Seco nd Row Ta ble Assem bly Parts List Figur e 7 -46 Cable Cov er Step 47 Atta ch the priv acy panel end piec es and t he cable c over for the ri ght en d privac y pane l.
7-46 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 7 Building the Second Row Table Assemb ly Parts Li st Figur e 7 -47 Pr ivac y P anel End Pi eces Step 48 Position the second ro w table so that the t railing ed ge of the f irst ro w table is exa ctly 59 inch es (150 cm) behind the l eadi ng ed ge of t he s econd r ow table.
7-47 Cisco TelePre sence System 3200 OL-14521-01 Chapter 7 Building the Seco nd Row Ta ble Assem bly Parts List Figur e 7 -48 Second Ro w T able P ositioning 59” (150 cm) 59” (150 cm) 59” (150 c.
7-48 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 7 Building the Second Row Table Assemb ly Parts Li st.
CH A P T E R 8-1 Cisco TelePre sence System 3200 OL-14521-01 8 Assembling the Remai ning Cisco TelePresence Elements Revised: March 5, 201 0, OL-14521-01 Parts List Key Part Description Part Number Qt.
8-2 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 8 Assemblin g the Re mainin g Cisco T elePresen ce Elem ents Parts Li st Codec A ssembly 1 Primary c odec 800-3063 8-xx CTS-CODE C- PRI-G2 13 2.
8-3 Cisco TelePre sence System 3200 OL-14521-01 Chapter 8 Assembl ing the Re maining Ci sco TelePrese nce Elem ents Parts List Note Note that th e ke y numbers res tart fo r each elemen t. Cautio n Some system component s hav e metal and pla stic edges with hard an gles.
8-4 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 8 Assemblin g the Re mainin g Cisco T elePresen ce Elem ents Parts Li st Step 1 Place the ass embly o v er the cent er displ ay , then attach the Camer a Assembly to the Camera Assembly bracket .
8-5 Cisco TelePre sence System 3200 OL-14521-01 Chapter 8 Assembl ing the Re maining Ci sco TelePrese nce Elem ents Parts List Step 2 Attac h the projec tor to th e projec tor mount ing brac ket.
8-6 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 8 Assemblin g the Re mainin g Cisco T elePresen ce Elem ents Parts Li st Step 3 Attac h the projec tor to th e projec tor mount ing brac ket, and atta ch the asse mbly to the undersi de of the center T abl e se gment.
8-7 Cisco TelePre sence System 3200 OL-14521-01 Chapter 8 Assembl ing the Re maining Ci sco TelePrese nce Elem ents Parts List Step 4 Attach th e VGA mod ule to the center T able segme nt. The VGA mod ule suppor ts the VGA peripher al cabl e when not in use.
8-8 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 8 Assemblin g the Re mainin g Cisco T elePresen ce Elem ents Parts Li st Step 5 Attach th e Cable man agement ba rs to the th ree Codecs .
8-9 Cisco TelePre sence System 3200 OL-14521-01 Chapter 8 Assembl ing the Re maining Ci sco TelePrese nce Elem ents Parts List Step 6 Attach th e Codec attach ment brackets to the three Cod ecs.
8-10 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 8 Assemblin g the Re mainin g Cisco T elePresen ce Elem ents Parts Li st Step 7 Attach the t hree cod ecs to t he dis play str uctur e codec s afety trays .
8-11 Cisco TelePre sence System 3200 OL-14521-01 Chapter 8 Assembl ing the Re maining Ci sco TelePrese nce Elem ents Parts List Step 8 Attac h the Speaker board fe et to the Spea ker boar ds. The fe et shou ld ang le towar ds th e rear of the D ispl ay st ructu re .
8-12 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 8 Assemblin g the Re mainin g Cisco T elePresen ce Elem ents Parts Li st Step 9 Attach th e Speake r board s to the Speake r board brack ets on the unde rside of the Display shel ve s.
8-13 Cisco TelePre sence System 3200 OL-14521-01 Chapter 8 Assembl ing the Re maining Ci sco TelePrese nce Elem ents Parts List Step 10 Attach th e Speakers to the Speak er boards.
8-14 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 8 Assemblin g the Re mainin g Cisco T elePresen ce Elem ents Parts Li st Step 11 Attach th e Projector screen to the front of the system .
8-15 Cisco TelePre sence System 3200 OL-14521-01 Chapter 8 Assembl ing the Re maining Ci sco TelePrese nce Elem ents Parts List Step 12 Attach the au dio/vi deo extension uni t to its bracket.
8-16 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 8 Assemblin g the Re mainin g Cisco T elePresen ce Elem ents Parts Li st Step 13 Attach the audio/ video extension unit to the re ar of the di splay assem bly .
8-17 Cisco TelePre sence System 3200 OL-14521-01 Chapter 8 Assembl ing the Re maining Ci sco TelePrese nce Elem ents Parts List Step 14 Attach the auxili ary con trol unit to its b racket using 5 mm scr ew s; then, attach th e unit and brack et to the r ear of the d isplay as sembly .
8-18 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 8 Assemblin g the Re mainin g Cisco T elePresen ce Elem ents Parts Li st Step 15 Assemble the Lar ge Camera T arget. When yo u slide the C amera ta rge t into the fr ame, ma ke sure the t arg et is center ed in th e frame betw een the ver tical lines at the top and botto m of the targ et.
CH A P T E R 9-1 Cisco TelePre sence System 3200 OL-14521-01 9 Routing Power and Signal Cables Revised: December 7, 201 1, OL-14521-01 Parts List Key Part Description Part Number Q ty Ctn Notes 1 Powe.
9-2 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 9 Routing Power and Sign al Cables Power Require ments for the Ci sco TelePre sence 3200 Cautio n Do not po wer on the PDUs until you route and co nnect all the cables. Cautio n Use ca re whe n you r oute t he power ca bles fr om th e PDUs.
9-3 Cisco TelePre sence System 3200 OL-14521-01 Chapter 9 Routing Power an d Signal Cables Power Requireme nts for the Cis co TeleP resence 3200 Step 1 Attach the lef t Po wer Distr ibu tion Unit (PDU) to the le ft Accesso ry cabin et.
9-4 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 9 Routing Power and Sign al Cables Power Require ments for the Ci sco TelePre sence 3200 Step 2 Attach the ri ght PDU to the right Accesso ry cabin et.
9-5 Cisco TelePre sence System 3200 OL-14521-01 Chapter 9 Routing Power an d Signal Cables Power Requireme nts for the Cis co TeleP resence 3200 Step 3 Attach the table as sembly PDU atta chme nt to the cen ter pri vac y pane l.
9-6 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 9 Routing Power and Sign al Cables Power Require ments for the Ci sco TelePre sence 3200 Step 4 Rout e the po wer c ables for th e f irst r o w tab le assem bly .
9-7 Cisco TelePre sence System 3200 OL-14521-01 Chapter 9 Routing Power an d Signal Cables Power Requireme nts for the Cis co TeleP resence 3200 Step 5 Rou te th e exte nsi on ca bl es fo r th e Cis c.
9-8 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 9 Routing Power and Sign al Cables Power Require ments for the Ci sco TelePre sence 3200 Step 6 Route the se cond row microp hone extensi on cabl es to the rear of the CTS 32 00.
9-9 Cisco TelePre sence System 3200 OL-14521-01 Chapter 9 Routing Power an d Signal Cables Power Requireme nts for the Cis co TeleP resence 3200 Step 7 If y our installatio n pro vides Ethernet connecti vity for second ro w meetin g particip ants, attac h the Ethern et cables to the module s in the foam b umpers and route th e Ethernet cab les.
9-10 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 9 Routing Power and Sign al Cables Power Require ments for the Ci sco TelePre sence 3200 Step 8 If your instal lation pro vides po wer to second ro w m eeting partic ipants, route th e po wer cables for the second ro w table.
9-11 Cisco TelePre sence System 3200 OL-14521-01 Chapter 9 Routing Power an d Signal Cables Power Requireme nts for the Cis co TeleP resence 3200 Step 9 Connect th e Cisco Unified IP Phone , VGA periphera l, and proje ctor HD vi deo cabl es.
9-12 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 9 Routing Power and Sign al Cables Power Require ments for the Ci sco TelePre sence 3200 Figur e 9-9 Cabling the C isco Unifi ed IP Pho ne, D .
9-13 Cisco TelePre sence System 3200 OL-14521-01 Chapter 9 Routing Power an d Signal Cables Power Requireme nts for the Cis co TeleP resence 3200 Step 10 Attach and r oute the cable s for the speak ers. Figur e 9-1 0 Cabling t he Speak ers Note Figur e 9-10 displ ays the re ar view of the Cisco T e lePresenc e System 320 0.
9-14 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 9 Routing Power and Sign al Cables Power Require ments for the Ci sco TelePre sence 3200 Step 11 Connect the f ollo wing ca bles to the auxili ary cont rol unit: • At tach and rout e the po wer cables for the lighting assem bly by conne cting the lights to the au xiliary contro l unit.
9-15 Cisco TelePre sence System 3200 OL-14521-01 Chapter 9 Routing Power an d Signal Cables Power Requireme nts for the Cis co TeleP resence 3200 Step 12 Attach and r oute the po wer and signal cab les for the plasma dis plays . Note Connect the c enter plasma display to "UNSWITCHED " outlet of the the auxil iary con trol unit.
9-16 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 9 Routing Power and Sign al Cables Power Require ments for the Ci sco TelePre sence 3200 Step 13 Attach and r oute the po wer- ov er -Ether net and HD V ideo ca bles for th e cam era.
9-17 Cisco TelePre sence System 3200 OL-14521-01 Chapter 9 Routing Power an d Signal Cables Power Requireme nts for the Cis co TeleP resence 3200 Step 14 Attach the fer rite cor es to the ends o f all six camer a cables (bo th the video and Ethern et cables , 12 ferr ite cores total).
9-18 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 9 Routing Power and Sign al Cables Power Require ments for the Ci sco TelePre sence 3200 Step 15 Attach the cab les betwe en the codecs. Note If you order ed a presen tati on codec w ith your T elePresen ce system , refer t o Figur e 9- 19 for additi onal cabling instruct ions.
9-19 Cisco TelePre sence System 3200 OL-14521-01 Chapter 9 Routing Power an d Signal Cables Power Requireme nts for the Cis co TeleP resence 3200 Note Figur e 9-15 displ ays the re ar view of the Cisco T e lePresenc e System 320 0. Left a nd right are reversed.
9-20 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 9 Routing Power and Sign al Cables Power Require ments for the Ci sco TelePre sence 3200 Step 17 Conne ct th e mic rophon e ca bles t o the cod ec and audio /video exten sion uni t.
9-21 Cisco TelePre sence System 3200 OL-14521-01 Chapter 9 Routing Power an d Signal Cables Power Requireme nts for the Cis co TeleP resence 3200 Ti p Before plug ging cab les into the Code c, label ea ch one.
9-22 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 9 Routing Power and Sign al Cables Power Require ments for the Ci sco TelePre sence 3200 Cable ro uting for a stand ard CTS- 3200 ins tallati on is sh own in Figure 9-18 .
9-23 Cisco TelePre sence System 3200 OL-14521-01 Chapter 9 Routing Power an d Signal Cables Power Requireme nts for the Cis co TeleP resence 3200 Cable routing fo r a standard CTS-3200 in stallation that use s a presentation co dec is sho wn in Figure 9-1 9 .
9-24 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 9 Routing Power and Sign al Cables Power Require ments for the Ci sco TelePre sence 3200 Step 18 (Opti onal) I f your inst allatio n uses an op tional external disp lay or a doc umen t camera , install and rou te the cabl ing.
9-25 Cisco TelePre sence System 3200 OL-14521-01 Chapter 9 Routing Power an d Signal Cables Power Requireme nts for the Cis co TeleP resence 3200 Figu re 9-20 Cabl in g Dia gram: C TS 32 0 0 In st all.
9-26 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 9 Routing Power and Sign al Cables Power Require ments for the Ci sco TelePre sence 3200 Step 19 (Opti onal) If your inst allation uses an extern al displ ay or a doc ument ca mera w ith a prese ntation codec, install and route th e cabling.
9-27 Cisco TelePre sence System 3200 OL-14521-01 Chapter 9 Routing Power an d Signal Cables Power Requireme nts for the Cis co TeleP resence 3200 Figur e 9-21 Cabling Diagr a m: CTS 320 0 Installati o.
9-28 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 9 Routing Power and Sign al Cables Power Require ments for the Ci sco TelePre sence 3200.
CH A P T E R 10-1 Cisco TelePre sence System 3200 OL-14521-01 10 Firs t-Time Setup Revised: December 7, 201 1, OL-14521-01 After you have assembled t he Cisco T elePr esence Sy stem (C TS), you set up.
10-2 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 10 Firs t-Time S etup Loading CTS Admi nistration Software Note M ake sure that you p ower on all codecs withi n 30 second s to avoid power on detectio n failu re. After yo u turn on the co decs, th e displa ys associa ted with each codec bec omes acti ve.
10-3 Cisco TelePre sence System 3200 OL-14521-01 Chapter 1 0 First-Time Setup Loading CTS Administration Software Figur e 1 0-2 Sys tem IP A ddr ess Ti p If the IP addre ss that displ ays is 192. 168.100 .2, the CTS 3200 coul d not cont act the DHCP ser ver or your system does not us e DHCP .
10-4 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 10 Firs t-Time S etup Configuring an A lternate TF TP Server (Op tional) Step 7 Open a browser on a com puter that is conn ected to the network . Step 8 In the URL f ield, type the IP add ress that you obtained in Step 4 an d press Enter .
10-5 Cisco TelePre sence System 3200 OL-14521-01 Chapter 1 0 First-Time Setup Settin g Up CT S Com ponents • Se tting Up t he Cameras, page 10- 6 • Se tting Up the Spea kers, page 10 -18 • Se tt.
10-6 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 10 Firs t-Time S etup Setting Up CTS Components Setting Up the Camer as The cam eras are set up co rre ctly when ima ges are cent ered an d in f ocu s on the disp lay s cree ns and the white ba lance has be en conf igured.
10-7 Cisco TelePre sence System 3200 OL-14521-01 Chapter 1 0 First-Time Setup Settin g Up CT S Com ponents This se ction descri bes th e pr ocedure s you make to set up the came ra and incl udes th e .
10-8 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 10 Firs t-Time S etup Setting Up CTS Components Figur e 1 0 - 3 C am era T a rge t A s s e m b l y Step 2 Attach t he large target t o the unde rside o f th e cent er t able sec tion by placi ng the round pads on the underside of the clam ps into recesses that are drilled und er the table.
10-9 Cisco TelePre sence System 3200 OL-14521-01 Chapter 1 0 First-Time Setup Settin g Up CT S Com ponents The targe t pat tern s houl d face th e ca mer a. Step 3 In the Cisc o T elePre sence admini strative GUI, navigate to Hardware Setup > T roubleshooting > Cameras .
10-10 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 10 Firs t-Time S etup Setting Up CTS Components Figur e 1 0-4 Camer a A djustmen t Scr ews Figur e 1 0-5 Cor r ect Camer a T ar get Alig nment—Cent er Display d.
10-11 Cisco TelePre sence System 3200 OL-14521-01 Chapter 1 0 First-Time Setup Settin g Up CT S Com ponents f. Make manual ad justmen ts to the ca mera foc used on the tar get and th e zoom rin g on the camer a to make t he follo wing adjustments to t he camera : • Al ign the red plus si gn to the plus sign in the middle of the t arget.
10-12 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 10 Firs t-Time S etup Setting Up CTS Components Figur e 1 0-7 Cor r ect Ca mer a T arg et Alignment—Lef t Dis play j.
10-13 Cisco TelePre sence System 3200 OL-14521-01 Chapter 1 0 First-Time Setup Settin g Up CT S Com ponents Figur e 1 0-8 Ar ranging the Small and Lar g e T arg ets Step 3 In the Cisc o T elePresenc e Administr ativ e GU I, click Setup , then click Sho w Fo cus T arget .
10-14 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 10 Firs t-Time S etup Setting Up CTS Components Figur e 1 0-1 0 Locat ion of F ocus a nd Zoom Rings Use th e thum bscre w (or 0.
10-15 Cisco TelePre sence System 3200 OL-14521-01 Chapter 1 0 First-Time Setup Settin g Up CT S Com ponents Figur e 1 0-1 1 P ositio ning the Sm all and Lar g e T arg ets for th e Secon d Row d. Make sure that the targets are st ill be ali gned within the green and red boxes on the di splay .
10-16 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 10 Firs t-Time S etup Setting Up CTS Components Figur e 1 0-12 Attac hing the Camera Hood Ass embly Troub lesho otin g Came ras Use Ta b l e 10-2 t o tro ubleshoo t proble ms with camer as.
10-17 Cisco TelePre sence System 3200 OL-14521-01 Chapter 1 0 First-Time Setup Settin g Up CT S Com ponents Ta b l e 1 0-2 T rouble shooting Char t for Camer a Pro blems Prob lem Possible Cause Action Cisco TelePresence 3000/3200 only Camera image appe ars on the wrong display .
10-18 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 10 Firs t-Time S etup Setting Up CTS Components Setting Up the Sp eakers The speake rs are set up co rrect ly you can hear sound clea rly from ea ch one . Y ou can choose whe ther you want to c ycle throu gh the speake rs automatica lly or manually .
10-19 Cisco TelePre sence System 3200 OL-14521-01 Chapter 1 0 First-Time Setup Settin g Up CT S Com ponents Step 3 Lightly tap each microph one and wa tch the a udio mete r on the c orres ponding display screen to se e that sound registers. This st ep verifies that t he m icroph ones are connec ted an d ope rati ng pro perly .
10-20 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 10 Firs t-Time S etup Setting Up CTS Components Setting Up the Projector T o set up t he projector , comple te the fo llo wing steps: Step 1 Make sure that a serial cab le is conn ected fro m your proje ctor to the Se rial output o f the a uxiliary co ntrol unit.
10-21 Cisco TelePre sence System 3200 OL-14521-01 Chapter 1 0 First-Time Setup Settin g Up CT S Com ponents The proj ector takes approxim ately 15- 30 seconds t o warm up, and shoul d be fully in itialize d within one minut e. If the proj ector i s not rece i ving video, the sc reen will be blue.
10-22 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 10 Firs t-Time S etup Setting Up CTS Components Lea ve the pr ojector in this state . When the video signal is turned of f or disconnected , the projector will go black for 30 second s. Then it will co unt down for 5 minutes and then turn of f the lamp.
10-23 Cisco TelePre sence System 3200 OL-14521-01 Chapter 1 0 First-Time Setup Settin g Up CT S Com ponents Note Th e Cisco T e lePresence System can displa y information from mult iple input de vices.
10-24 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 10 Firs t-Time S etup Setting Up CTS Components – Click the Refr esh On/Off Status b utton to update the o n/off status of ea ch port . – Click the T urn Select ed Lights On/Off to test the selected light unit( s).
CH A P T E R 11-1 Cisco TelePre sence System 3200 OL-14521-01 11 Use & C are Guide Revised: July 28 , 2008, OL-14521-0 1 Maintaining the Tabletop Cleani ng yo ur woo d surf aces T o avoid the build-up of dirt , dust al l wood surfaces on a r egular bas is.
11-2 Cisco Tele Presence Syste m 3200 OL-14521-01 Ch apter 1 1 U se & Car e Gui de Cleaning the Camer a lens Cleaning the Camera lens Cautio n Do not touch the ca mera after installat ion is compl eted. If you ne ed to clean the ca mera len s, use a d ry micro fib er clot h.
CH A P T E R 12-1 Cisco TelePre sence System 3200 OL-14521-01 12 Field-Replaceable Unit Guid e Revised: December 7, 201 1, OL-14521-01 This chap ter de scribe s the steps you perfo rm to rep lace the .
12-2 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 12 Field-Replaceable Un it Guide Complete List of Spares fo r the Cisco Te lePresenc e Syste m 3200 T able 12-1 List o f FIeld-Re placeable Un.
12-3 Cisco TelePre sence System 3200 OL-14521-01 Chapter 1 2 Field-Replace able Unit Guide Complete List of Spa res for th e Cisco TelePr esence Syste m 3200 CTS-DI SP-BKT -1K 3K Displa y bracket for .
12-4 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 12 Field-Replaceable Un it Guide Powering On the Syst em Powering On the System Use t his p rocedur e for sect ions in this chap ter t hat re quire you to power on the sy stem .
12-5 Cisco TelePre sence System 3200 OL-14521-01 Chapter 1 2 Field-Replace able Unit Guide Repla cin g the Cam era C luste r—Par t Numbe r CTS3 K-CA M-CL ST-G2 = c. In the Use Conf iguration TFTP Serv er ar ea, click A utomati c to set TFTP conditions to their default v alue and remo ve an y al ternate TFT P serv ers.
12-6 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 12 Field-Replaceable Un it Guide Replacing a Plasma D isplay—Part Number CTS-DISP-65-GEN4 = Cautio n Make sure all system po wer is turned off befor e be ginning this d isassembly . Step 2 Remove the top ca mera hood by r emoving t he screws th at sec ure it to t he bra cket.
12-7 Cisco TelePre sence System 3200 OL-14521-01 Chapter 1 2 Field-Replace able Unit Guide Replac ing a Plasma Displa y—Pa rt Numb er CTS- DISP -65-G EN4= • * Safety glasses • * Box cutters Cisco TelePresence 3200 Structure, Acce ssory, and Adjustment Assembly : • Po wer scre wdri v er w ith 2.
12-8 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 12 Field-Replaceable Un it Guide Replacing a Plasma D isplay—Part Number CTS-DISP-65-GEN4 = c.
12-9 Cisco TelePre sence System 3200 OL-14521-01 Chapter 1 2 Field-Replace able Unit Guide Replac ing a Plasma Displa y—Pa rt Numb er CTS- DISP -65-G EN4= Step 1 Unscre w the left Accessor y cabinet fr om the left Accesso ry cabin et attachm ent brack et.
12-10 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 12 Field-Replaceable Un it Guide Replacing a Plasma D isplay—Part Number CTS-DISP-65-GEN4 = Figur e 12 -1 Remo ving the D ispla y Mou nting Br ac k et Step 7 Move the Plas ma disp lay ou t of t he work area to a temp orary l ocatio n safe from poten tial damage.
12-11 Cisco TelePre sence System 3200 OL-14521-01 Chapter 1 2 Field-Replace able Unit Guide Replac ing a Plasma Displa y—Pa rt Numb er CTS- DISP -65-G EN4= Figur e 12 -2 At tachi ng the Displa y Mounting Bra ck et Step 10 T urn the power switc h on the Plasma display to the On position.
12-12 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 12 Field-Replaceable Un it Guide Replacing a Plasma D isplay—Part Number CTS-DISP-65-GEN4 = Figur e 12 -3 P o w er and Signal Connections f.
12-13 Cisco TelePre sence System 3200 OL-14521-01 Chapter 1 2 Field-Replace able Unit Guide Replac ing a Plasma Displa y—Pa rt Numb er CTS- DISP -65-G EN4= Figur e 12 -4 P o w er and Signa l Connecti ons fo r Displa ys with D VI Connect ors Step 12 Hang th e replacemen t Plasma disp lay .
12-14 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 12 Field-Replaceable Un it Guide Replacing a Speake r—Part Number CTS- LDSPKR= Step 18 Hang th e speak er boar ds. See Chapter 8, “ Assembling th e Remainin g Cisco T elePresence Ele ments.
12-15 Cisco TelePre sence System 3200 OL-14521-01 Chapter 1 2 Field-Replace able Unit Guide Repla cing a S peaker —Part N umber CTS-LDSP KR= Rem oving and Replac ing a Spea ker Note M ake sure to retain all screws, connecto rs, and other pa rts during th e disassembl y .
12-16 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 12 Field-Replaceable Un it Guide Repl acing a Codec U nit—Part N umber CT S-CODEC-PRI -G2= (Pr imary Codec) or CTS-CODEC-SE C= (Sec ondary Cod ec) Step 10 Reattach the pr ojector scre en.
12-17 Cisco TelePre sence System 3200 OL-14521-01 Chapter 1 2 Field-Replace able Unit Guide Repl aci ng a Co dec U nit—P art Numbe r CT S-COD EC-PRI -G2 = (Prima ry Co dec ) or CT S-CODE C-SE C= (Se conda ry Step 2 From t he back o f the C isco T elePres ence 3200 , acces s the co dec to be r emo ved.
12-18 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 12 Field-Replaceable Un it Guide Replacing a Micr ophone—Pa rt Numbe r CTS-MIC= Step 16 Po wer on the system by complet ing the steps in the “Powering On the Sy stem” secti on on page 12-4 .
12-19 Cisco TelePre sence System 3200 OL-14521-01 Chapter 1 2 Field-Replace able Unit Guide Replaci ng a Mic ropho ne—Part Num ber CTS -MIC= Rem oving and Replac ing a Micr opho ne Note Make sur e to retain a ll screws, brackets, and ot her parts d uring the d isassembly .
12-20 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 12 Field-Replaceable Un it Guide Replacing a Micr ophone—Pa rt Numbe r CTS-MIC= Step 3 From th e und erside of the table top, r emove the two screws and washer s that se cure t he microp hone.
12-21 Cisco TelePre sence System 3200 OL-14521-01 Chapter 1 2 Field-Replace able Unit Guide Replaci ng a Mic ropho ne—Part Num ber CTS -MIC= c. Alternat ely , if the fit is too tight to remo ve in this manner , remov e the mountin g screws fr om the tabletop.
12-22 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 12 Field-Replaceable Un it Guide Replacing a Lig ht Fixture— Part Numb er CTS-LI GHT-FI XT= Replacing a Light Fix ture—Part Number CTS-LI.
12-23 Cisco TelePre sence System 3200 OL-14521-01 Chapter 1 2 Field-Replace able Unit Guide Replaci ng th e Audio/V ideo Ext ension Uni t—Part Number C TS-AV-E XP= Step 3 For the right and left ver tical light f ixtures, foll ow these steps. a. Remo ve the scre ws from the light f ixture h olding bra cket.
12-24 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 12 Field-Replaceable Un it Guide Replacing the A uxiliary Cont rol Unit— Part Numb er CTS-LIGH T-CTRL= Step 5 Attach t he ca bles t o the new extension unit using t he mask ing tape labe ls as a guide .
12-25 Cisco TelePre sence System 3200 OL-14521-01 Chapter 1 2 Field-Replace able Unit Guide Replacing the Cisco Unified IP Phone —Part Number CP-7975G-CTS= Replacing the Cis co Unified IP Phone—Part Number CP-7975G-CTS= Step 1 Open a br o wser on a comp uter co nnected to the netw ork.
12-26 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 12 Field-Replaceable Un it Guide Replacing the Pro jector Lam p—Part Number CTS-PR JTR-BL-GEN1 = or CTS-PRJTR -GEN2-CH (Ch ina) Step 5 Note.
12-27 Cisco TelePre sence System 3200 OL-14521-01 Chapter 1 2 Field-Replace able Unit Guide Repl acin g the Proje ctor— Par t Num ber CTS-PRJ TR- GEN1 = d. When you ar e prompted to reset the lam p counter , Select Ye s and press the OK bu tt o n . e.
12-28 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 12 Field-Replaceable Un it Guide Replacing a Displ ay Shelf Step 3 Remove the PDU by pe rform ing one of th e fol lowing ste ps: • Remove a PDU from the acce ssory cab inet or the first row center priv acy panel by removing the mounting sc rews.
12-29 Cisco TelePre sence System 3200 OL-14521-01 Chapter 1 2 Field-Replace able Unit Guide Rep laci ng a Dis play She lf Ti p A 10 mm ope n en d ratc heting wre nch is useful to lo osen and tighte n the draw b olts or cam lock s. Note M ake sure to retain all screws, connecto rs, and other pa rts during th e disassembl y .
12-30 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 12 Field-Replaceable Un it Guide Replacing a First Row Table To p Section Step 9 Slightly separa te the shelf to be replaced fro m the other shelv es. Cautio n Make sure that al l remain ing shel ves stay on the displa y structu re an d do not fal l betwee n the str ucture supports.
12-31 Cisco TelePre sence System 3200 OL-14521-01 Chapter 1 2 Field-Replace able Unit Guide Replacin g a First R ow Table T op Sect ion Removin g and R eplacin g a First Row Table Top Section Step 1 Open the t able door .
12-32 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 12 Field-Replaceable Un it Guide Replacing a Second Row Table To p Section Step 18 Insert the dr aw bolt s or cam lock s and tighten the m between the n ew ta ble top section and the adjoining table top sections.
12-33 Cisco TelePre sence System 3200 OL-14521-01 Chapter 1 2 Field-Replace able Unit Guide Repla cing a Se cond R ow Table T op Sect ion Remov ing an d Repla cing a Seco nd Row T able To p Sectio n S.
12-34 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 12 Field-Replaceable Un it Guide Replacing a Second Row Table To p Section Step 12 Mov e one of the tabl e legs t o allo w acce ss to the dra w b olts or ca m locks and remov e the d raw bol ts or cam lock s from the adjoinin g table to p section s.
12-35 Cisco TelePre sence System 3200 OL-14521-01 Chapter 1 2 Field-Replace able Unit Guide Repla cing a Se cond R ow Table T op Sect ion Step 28 Attach th e pri v ac y pan el hanger s to the table le gs that support eac h side of the tabl e top section .
12-36 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 12 Field-Replaceable Un it Guide Replacing a Second Row Table To p Section.
A- 1 Cisco T elePresen ce System 3200 OL-14521-01 APPENDIX A Appendix A: Parts List Sorted by Carton Revised: February 3, 201 0, OL-14521- 01 Overview • Each tab le repr esent s a separ ate cart on. • Each carto n may contain multiple parts. Some of these part s are grouped together in kits.
A- 2 Cisco Tele Presence Syste m 3200 OL-14521-01 Appendix A Appendix A: Part s List Sorted by Carton Carton 1 of 58: Mechanica l Access ory Kit, CTS3K -ACC-KIT , 53-2855-xx 78-1 7839- 05B0 Regula tor.
A-3 Cisco T elePresen ce System 3200 OL-14521-01 Append ix A Appendi x A: Parts List Sorted by Cart on Carton 2 of 58: Mechanical Ac cessory Kit, 53- 2855-xx, CTS3K- ACC2-KIT Carton 2 of 58: Mechani c.
A- 4 Cisco Tele Presence Syste m 3200 OL-14521-01 Appendix A Appendix A: Part s List Sorted by Carton Carton 4 of 58: Camera Cluster, 800-30872-xx, CTS3K-CA M-CLST-G2 Carton 4 of 58: Camera Cluster, 8.
A-5 Cisco T elePresen ce System 3200 OL-14521-01 Append ix A Appendi x A: Parts List Sorted by Cart on Carton 7 of 58: Proje ctor, 74-4 824-xx, CT S-PRJTR-GEN1 Carton 7 of 58: Projector, 74-4824-xx, C.
A- 6 Cisco Tele Presence Syste m 3200 OL-14521-01 Appendix A Appendix A: Part s List Sorted by Carton Carton 12 of 58: Camera Assembly Brack et, 69-1627-xx, CTS3K-STRUCTU RE Carton 12 of 58: Camera As.
A-7 Cisco T elePresen ce System 3200 OL-14521-01 Append ix A Appendi x A: Parts List Sorted by Cart on Carton 16 of 58: Front Foot Stabiliz er, 69-1624-xx, CST3K-S TRUCTURE Carton 16 of 58: Front Foot.
A- 8 Cisco Tele Presence Syste m 3200 OL-14521-01 Appendix A Appendix A: Part s List Sorted by Carton Cart on 2 0 of 58: Acc essor y Kit f or CTS- 3200 , 53- 3108-x x, CTS3 2-ACC- KIT Carton 20 of 58:.
A-9 Cisco T elePresen ce System 3200 OL-14521-01 Append ix A Appendi x A: Parts List Sorted by Cart on Carton 24 o f 58: Plasma Displa y, 74-4881-xx, CTS -DISP-65-GEN2 Carton 24 of 58: Plasma Displa y.
A-10 Cisco Tele Presence Syste m 3200 OL-14521-01 Appendix A Appendix A: Part s List Sorted by Carton Cart on 2 7 of 58: Li ght Fixtu re, 74-5361 -xx, CTS- LIGHT -FIX T Carton 27 of 58: Light Fixture,.
A-11 Cisco T elePresen ce System 3200 OL-14521-01 Append ix A Appendi x A: Parts List Sorted by Cart on Carton 30 of 58: Ligh t Fixture, 74-5362-xx, CTS-LIGHT-FIXT Carton 30 of 58: Light Fixture, 74-5.
A-12 Cisco Tele Presence Syste m 3200 OL-14521-01 Appendix A Appendix A: Part s List Sorted by Carton Carton 33 of 58: Support Crossbars , 69-1623-01, CTS3K-S TRUCTURE Carton 33 of 58: Support Cross b.
A-13 Cisco T elePresen ce System 3200 OL-14521-01 Append ix A Appendi x A: Parts List Sorted by Cart on Carton 37 of 58: Disp lay Structure , 69-1622-xx, CTS3K- STRUCTURE Carton 37 of 58: Display Stru.
A-14 Cisco Tele Presence Syste m 3200 OL-14521-01 Appendix A Appendix A: Part s List Sorted by Carton Carton 40 of 58: Second ary Code c, 800-28202- xx, CTS-CODEC-SE C Carton 40 of 58: Secondary Cod e.
A-15 Cisco T elePresen ce System 3200 OL-14521-01 Append ix A Appendi x A: Parts List Sorted by Cart on Carton 44 of 58: Lighting Assem bly, 69-1613-xx, C TS3K-LIGHT-STR Carton 44 of 58: Lighting Asse.
A-16 Cisco Tele Presence Syste m 3200 OL-14521-01 Appendix A Appendix A: Part s List Sorted by Carton Carton 48 of 44: Acce ssory Cabi net, Right, 69-1 837-xx, CT S3K-FUR-MAPL E Carton 48 of 44: Acces.
A-17 Cisco T elePresen ce System 3200 OL-14521-01 Append ix A Appendi x A: Parts List Sorted by Cart on Carton 50 of 58: Cisco TelePresen ce 3200 Struct ure—A dd ition to Standard CTS-3000, CTS32-S .
A-18 Cisco Tele Presence Syste m 3200 OL-14521-01 Appendix A Appendix A: Part s List Sorted by Carton Carton 51 of 58: Display Shelf Support s and Codec Tray , 69-1626-xx, CTS3K-STRUCTU RE Carton 51 o.
A-19 Cisco T elePresen ce System 3200 OL-14521-01 Append ix A Appendi x A: Parts List Sorted by Cart on Carton 54 of 58: Ta bletop Le g Base, 69-1915-xx, CTS3K-STRU CTURE Carton 54 of 58: Tabletop Leg.
A-20 Cisco Tele Presence Syste m 3200 OL-14521-01 Appendix A Appendix A: Part s List Sorted by Carton Carton 58 of 58: Tableto p Sections, Display Shel ves, an d Speaker Boards, 69-1835-x x, CTS3K -M .
B-1 Cisco T elePresen ce System 3200 OL-14521-01 APPENDIX B Appendix B: Region- and Country-Specific Equip ment Revised: December 7, 201 1, OL-14521-01 The fol lo wing countrie s and re gions ha ve equipment manufactu red to l ocal re gulations. Note Th ese photo s are provided a s a referen ce for the plug type .
B-2 Cisco Tele Presence Syste m 3200 OL-14521-01 Appendix B Appendix B: Region- and Country-Specific Equipme nt Asia Paci fic Asia Pacific Part Description Part Number Qty Photo T e lePresence Po wer .
B-3 Cisco T elePresen ce System 3200 OL-14521-01 Append ix B Appendix B: Region - and Count ry-Specif ic Equipm ent Argentina Argentina Part Description Part Number Qty Photo T e lePresence Po wer Cor.
B-4 Cisco Tele Presence Syste m 3200 OL-14521-01 Appendix B Appendix B: Region- and Country-Specific Equipme nt Aust ralia Australia Part Description Part Nu mber Qty Photo T elePresence Power Cor d P.
B-5 Cisco T elePresen ce System 3200 OL-14521-01 Append ix B Appendix B: Region - and Count ry-Specif ic Equipm ent Centra l Europe Central Europe Part Description Part Number Qty Photo T e lePresence.
B-6 Cisco Tele Presence Syste m 3200 OL-14521-01 Appendix B Appendix B: Region- and Country-Specific Equipme nt China China Par t Des cripti on Par t N umber Qty P hoto T elePresence Power Cord PWR-CORD10-CN 37-0837-0 1 2 I/O module s: power/Ethernet CTS-L APCONN-CN 74-4914-0 1 6 Projector 74- 6687-0 1 Kit No.
B-7 Cisco T elePresen ce System 3200 OL-14521-01 Append ix B Appendix B: Region - and Count ry-Specif ic Equipm ent India, UAE, Sou th Africa India, UAE, South Afri ca Part Description Part Nu mber Qt.
B-8 Cisco Tele Presence Syste m 3200 OL-14521-01 Appendix B Appendix B: Region- and Country-Specific Equipme nt Israe l Israel Part Description Part Number Qty Photo T elePresence Power Cord PWR-CORD1.
B-9 Cisco T elePresen ce System 3200 OL-14521-01 Append ix B Appendix B: Region - and Count ry-Specif ic Equipm ent Italy Italy Part Description Part Number Qty Photo T e lePresence Po wer Cord PWR-CO.
B-10 Cisco Tele Presence Syste m 3200 OL-14521-01 Appendix B Appendix B: Region- and Country-Specific Equipme nt Japan Japan Part Description Part Number Qty Photo T e lePresence Po wer Cord PWR-CORD1.
B-11 Cisco T elePresen ce System 3200 OL-14521-01 Append ix B Appendix B: Region - and Count ry-Specif ic Equipm ent North Ame rica North America Part Description Part Number Qty Photo T e lePresence .
B-12 Cisco Tele Presence Syste m 3200 OL-14521-01 Appendix B Appendix B: Region- and Country-Specific Equipme nt Switze rland Switze rland Part Description Part Number Qty Photo T e lePresence Po wer .
B-13 Cisco T elePresen ce System 3200 OL-14521-01 Append ix B Appendix B: Region - and Count ry-Specif ic Equipm ent U nite d Ki ngdo m United Ki ngdom Part Description Part Number Qty Photo T e lePre.
B-14 Cisco Tele Presence Syste m 3200 OL-14521-01 Appendix B Appendix B: Region- and Country-Specific Equipme nt Unit ed Kingdom.
C-1 Cisco T elePresen ce System 3200 OL-14521-01 APPENDIX C Cisco TelePresence System 3200 Pallet Dimensions and Description Revised: October 29, 2009, OL- 14521-01 The follo wing chapter provide s you with the dimensions of the pallets for the Cisco T eleP res ence System 3200.
C-2 Cisco Tele Presence Syste m 3200 OL-14521-01 Appendix C Cisco TelePresen ce System 3200 Pallet Dime nsions and Desc ription The follo wing table provides you with the weight and descriptio n of the pallets for the Cisco T e lePres ence System 3200.
C-3 Cisco T elePresen ce System 3200 OL-14521-01 Append ix C Cisco TelePre sence Syst em 3200 Pallet Dimensio ns and Des criptio n 6 Furnitur e (2 cart ons) and lighti ng stru ctur e (1 c arton) Part .
C-4 Cisco Tele Presence Syste m 3200 OL-14521-01 Appendix C Cisco TelePresen ce System 3200 Pallet Dime nsions and Desc ription.
Ein wichtiger Punkt beim Kauf des Geräts Cisco 3200 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Cisco 3200 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Cisco 3200 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Cisco 3200 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Cisco 3200 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Cisco 3200 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Cisco 3200 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Cisco 3200. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Cisco 3200 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
