Benutzeranleitung / Produktwartung 3040 des Produzenten Cisco
Zur Seite of 68
Corporate He adquarters Cisc o Syst ems , Inc . 170 West Ta sman Drive San Jos e, CA 95 134-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553- NETS (638 7) Fax: 408 526-4100 Cisco Catal yst Bla.
THE SPECIFICATIONS AND INFORMATION REGARDING TH E PRODUCTS IN THIS MANUAL ARE SUBJE CT TO CHANGE WITHOUT NO TICE. ALL STATEMENT S, INFORMATI ON, AND RECOMMENDA TIONS IN T HIS MANUAL ARE BELIEVED TO BE ACCURATE BU T ARE PRESEN TED WITHOUT WARRANTY OF ANY KIND, EXPRE SS OR IMPLIED.
iii Cisco Catalyst Blade Switch 3040 for FSC Hardware Installation Guide OL-10694-01 CONTENTS Preface vi i Audienc e vii Pur pose vii Organi zation vi i Conv enti ons viii Relat ed P ubl icatio ns vii i Obtain ing Docu mentati on ix Cisco.
Cont ent s iv Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 Management Options 1-5 Using th e Devic e Manager 1-5 Using th e Management Bl ade Web In terf ace 1-6.
Content s v Cisco Catalyst Blade Switch 3040 for FSC Hardware Installation Guide OL-10694-01 APPENDI X B Connector and Cable Specif ications B-1 Connect or S pecifi catio ns B-1 10/1 00/1000 Po rts B-.
Cont ent s vi Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01.
vii Cisco Catalyst Blade Switch 3040 for FSC Hardware Installation Guide OL-10694-01 Preface Audience This guide is for the netwo rking or computer techn ician responsible for insta lling the Cisco Ca.
viii Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 Preface Conv ent ions Conven tions This docu ment u ses these c on ventions and s ymbols for no tes, cau tions, and war nings: Note Means r e ader ta ke no te .
ix Cisco Catalyst Blade Switch 3040 for FSC Hardware Installation Guide OL-10694-01 Pre face Obtaining Documentation • These c ompatibility matr ix documents are a v ailable f rom this Cisco.com site : http://www .cisco.com/e n/US/products/hw/modules/ps5455/produc ts_device_s upport_tables_list.
x Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 Preface Docum entation Fe edback Ordering Docume ntation Y ou must be a registe red Cisco .com user t o acc ess Cisco M arketpla ce. Regi stered user s may or der Cisco docume ntatio n at the Prod uct Docum entation St ore at this URL: http://www .
xi Cisco Catalyst Blade Switch 3040 for FSC Hardware Installation Guide OL-10694-01 Pre face Produc t Alerts an d Field Not ices In an e mergency , you c an al so reac h PSIR T by te lephone: • 1 87.
xii Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 Preface Obtain ing Techni cal Ass istance Access to all tools on the Cisco T echnical Support & Documentation we bsite requ ires a Cisco. com user ID and passwo rd.
xiii Cisco Catalyst Blade Switch 3040 for FSC Hardware Installation Guide OL-10694-01 Pre face Obtaining Additional Publications and Information Definitions of Servic e Re quest Sev erity T o ensure that all s ervice re quest s are repor ted in a stand ard for mat, Cisco h as establish ed se ver ity def initi ons.
xiv Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 Preface Obtainin g Addi tional Pub lications and Informat ion • Networking produ cts offered by Ci sco S ystems, as we ll as custom er sup port serv ices, can be obtaine d at th is URL : http://www .
C HAPTER 1-1 Cisco Catalyst Blad e Switch 3040 for FSC Hardware Installation Gui de OL-10694-01 1 Product Overview This c hapter provides a func tional overview of the Cisco Ca talys t Blad e Switc h 3040 for FSC, refe rred to as the blade swit ch .
1-2 Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 Chapter 1 P roduct Overv iew Front Panel De scrip tion Front Panel Descri ption T en of t he port s on t he 16-p ort Gigabit E thernet blade sw itch a re in ternal 1000BASE-X ports that connect to the BX600 sys tem through the b ackplane.
1-3 Cisco Catalyst Blad e Switch 3040 for FSC Hardware Installation Gui de OL-10694-01 Chapter 1 Product Overv iew Front Panel Description 10/100/1 000 Ports The two cop per Ethe rnet por ts oper ate at 10, 100 , or 1000 Mb ps and suppo rt auton egotiati on and full-dupl ex opera tion.
1-4 Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 Chapter 1 P roduct Overv iew Front Panel De scrip tion LEDs The b lade s witch has eigh t LED s inc ludin g an LED for eac h exter nal por t, on e LED for t he c onsol e por t, and one LE D used by BX600 system managem ent boar d (see Figure 1- 1 ).
1-5 Cisco Catalyst Blad e Switch 3040 for FSC Hardware Installation Gui de OL-10694-01 Chapter 1 Product Overv iew Rear Pane l Descript ion Rear Panel Description The bl ade sw itch c onnec ts to the BX 600 system th rough the backpla ne conn ecto r on t he b lade switch rea r pane l.
1-6 Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 Chapter 1 P roduct Overv iew Managem ent Option s Step 3 Use t he device ma nager t o perf orm b asic b lade swi tch configu ration a nd mo nitorin g. Re fer to the d evice manage r online hel p for mor e inform ation .
1-7 Cisco Catalyst Blad e Switch 3040 for FSC Hardware Installation Gui de OL-10694-01 Chapter 1 Product Overv iew Manageme nt Options Y ou ca n do these t asks: • In the Loca ted LED f ield, ch oose on or off , and click Apply to locate the blade switch .
1-8 Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 Chapter 1 P roduct Overv iew Managem ent Option s Using the Co mmand -Line Interface Y ou ca n enter Cisc o IOS comma nds and para meters thr ough the CL I.
C HAPTER 2-1 Cisco Catalyst Blad e Switch 3040 for FSC Hardware Installation Gui de OL-10694-01 2 Blade Switch Ins tallation This chapt er provides instruc tions on how to install your Cisco Catalyst .
2-2 Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 Chapter 2 Bla de Switch Installation Preparing fo r Instal lation Warn ings These w arnings a re translate d int.
2-3 Cisco Catalyst Blad e Switch 3040 for FSC Hardware Installation Gui de OL-10694-01 Chapter 2 Blade Switc h Installat ion Preparing for Installation Installation Guidelines Before you install th e .
2-4 Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 Chapter 2 Bla de Switch Installation BX600 Syst em Archite cture These i tems s hip wi th your blade switch: •.
2-5 Cisco Catalyst Blad e Switch 3040 for FSC Hardware Installation Gui de OL-10694-01 Chapter 2 Blade Switc h Installat ion BX600 System Architecture Figure 2-2 s hows the BX600 syste m manageme nt bla de on the le ft and an op tiona l advanced KVM blade on the right.
2-6 Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 Chapter 2 Bla de Switch Installation Overview of Steps for Ins talling and Initially Conf iguring t he Blade Swi tch Consider these re quirements before you install your blade switc h: • The NE T1 and NET2 sl ots ar e a pair .
2-7 Cisco Catalyst Blad e Switch 3040 for FSC Hardware Installation Gui de OL-10694-01 Chapter 2 Blade Switc h Installat ion Overview of Steps for Installing and Initially Configuring the Blade Switch Cautio n Keep dummy blade s for future use.
2-8 Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 Chapter 2 Bla de Switch Installation Overview of Steps for Ins talling and Initially Conf iguring t he Blade Swi tch Figure 2-4 sh ows the blade switch be ing inserted into the BX60 0 system.
2-9 Cisco Catalyst Blad e Switch 3040 for FSC Hardware Installation Gui de OL-10694-01 Chapter 2 Blade Switc h Installat ion Overview of Steps for Installing and Initially Configuring the Blade Switch.
2-10 Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 Chapter 2 Bla de Switch Installation Overview of Steps for Ins talling and Initially Conf iguring t he Blade Swi tch Figur e 2-6 Connecting thro ugh the BX600 S yst em Mana gemen t Blade Step 2 On the PC terminal emulat ion program: a.
2-11 Cisco Catalyst Blad e Switch 3040 for FSC Hardware Installation Gui de OL-10694-01 Chapter 2 Blade Switc h Installat ion Overview of Steps for Installing and Initially Configuring the Blade Switch Note I f the BX600 sy stem is alrea dy conf igured, obta in the mana gement blade usern ame and password from th e system ad ministra tor .
2-12 Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 Chapter 2 Bla de Switch Installation Overview of Steps for Ins talling and Initially Conf iguring t he Blade Sw.
2-13 Cisco Catalyst Blad e Switch 3040 for FSC Hardware Installation Gui de OL-10694-01 Chapter 2 Blade Switc h Installat ion Overview of Steps for Installing and Initially Configuring the Blade Switch Completing the Initial Configuration Foll ow th ese steps to complete the setup prog ram and to create an initial co nfig uration.
2-14 Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 Chapter 2 Bla de Switch Installation Overview of Steps for Ins talling and Initially Conf iguring t he Blade Swi tch Step 8 T o conf igure the interf ace, enter Ye s after the prom pt, and then en ter th e blade switch IP address an d subnet mask.
2-15 Cisco Catalyst Blad e Switch 3040 for FSC Hardware Installation Gui de OL-10694-01 Chapter 2 Blade Switc h Installat ion Installing and Removing SFP Modules Step 12 D isconnect the BX60 0 sy stem se rial po rt o r the blade switch consol e por t from the PC .
2-16 Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 Chapter 2 Bla de Switch Installation Installing and Rem oving SFP Mod ules Removing and installing an SFP module can shorte n its useful life. Do not remove and insert SFP modules m ore often th an is ab solutely ne cessary .
2-17 Cisco Catalyst Blad e Switch 3040 for FSC Hardware Installation Gui de OL-10694-01 Chapter 2 Blade Switc h Installat ion Installing and Removing SFP Modules Removin g SFP Mod ules from SFP M odul.
2-18 Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 Chapter 2 Bla de Switch Installation Conne cting to the 10/10 0/10 00 Ports Connecting to the 10/100/1000 Ports The 10 /100/10 00 ports co nf igure the mselve s to op erate at th e speed of attached de vices.
2-19 Cisco Catalyst Blad e Switch 3040 for FSC Hardware Installation Gui de OL-10694-01 Chapter 2 Blade Switc h Installat ion Conne cting to SFP Modu les You can use the mdix auto interface conf iguratio n command i n the CL I to enable the auto matic mediu m-depen dent inte rface crosso v er (auto-M DIX) feat ure.
2-20 Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 Chapter 2 Bla de Switch Installation Where to Go Next Figur e 2-1 1 Installing an SFP Mo dule Step 3 Inse rt the othe r cable end into a f iber -o ptic re ceptacle o n a target d e vice.
2-21 Cisco Catalyst Blad e Switch 3040 for FSC Hardware Installation Gui de OL-10694-01 Chapter 2 Blade Switc h Installat ion Where t o Go Next • Usi ng the Mana geme nt Bl ade W eb Inte rf ace Y ou can monitor and m anag e the bl ade sw itches thr ough the BX600 system web i nterfac e.
2-22 Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 Chapter 2 Bla de Switch Installation Where to Go Next.
C HAPTER 3-1 Cisco Catalyst Blad e Switch 3040 for FSC Hardware Installation Gui de OL-10694-01 3 Troubleshooting The LEDs on the front panel pro vide troublesh ooting informati on about the blade switch . They sho w failur es in the p o we r - o n s el f-t es t (POST) , port- connecti vity problems, and ove rall blade swi tch perform ance.
3-2 Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 Chapter 3 Troubleshoo ting Diagnos ing Problem s Y ou can a ccess th e T echnical Support W ebsite ( http ://www .
3-3 Cisco Catalyst Blad e Switch 3040 for FSC Hardware Installation Gui de OL-10694-01 Chapter 3 Troubleshoot ing Diagnosing Problems T able 3-1 Common Pr oblems and The ir Solutions Symptom Possible Cause Resolu tion Poor performan ce or excessive erro rs Duple x autone gotiation mismatch .
3-4 Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 Chapter 3 Troubleshoo ting Diagnos ing Problem s No connect ivity Incorre ct or bad cable The se are res ults of no li nk at bot h ends: • A crosso v er cable was used when a s traig ht-throug h was requir ed, or vice- versa.
3-5 Cisco Catalyst Blad e Switch 3040 for FSC Hardware Installation Gui de OL-10694-01 Chapter 3 Troubleshoot ing Locati ng the Blad e Switch S erial Nu mber Locating the Blad e Switch Serial Number If you cont act Cisc o T echni cal A ssistance , you need to know the serial n umber of your swi tch.
3-6 Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 Chapter 3 Troubleshoo ting Locatin g the Blade Switch Serial Number.
A- 1 Cisco Catalyst Blade Switch 3040 for FSC Hardware Installation Guide OL-10694-01 APPEND IX A Technical Specifications This ap pendix lists th e blade s witch te chnical specif ications in Ta b l e A - 1 .
A- 2 Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 Appendi x A Technical Speci fication s.
B-1 Cisco Catalyst Blade Switch 3040 for FSC Hardware Installation Guide OL-10694-01 APPEND IX B Connector and Cabl e Specifications This app endix des cribes the blade switch p orts and th e cables and adapters that yo u use to conn ect the blade swit ch to other devices.
B-2 Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 Appendi x B Connector a nd Cabl e Specif ication s Connector Spe cificatio ns Connecting to 1000BASE-T Devices W.
B-3 Cisco Catalyst Blade Switch 3040 for FSC Hardware Installation Guide OL-10694-01 Append ix B Connector and Cab le Specifi cations Cable and Adapter Specif icati ons Console P ort The co nsole port uses a n 8-p in RJ -45 conn ecto r, wh ich is descri bed i n Ta b l e B - 1 and Ta b l e B - 2 .
B-4 Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 Appendi x B Connector a nd Cabl e Specif ication s Cable and Ad apter Speci ficatio ns Four Twisted-Pa ir Cable .
B-5 Cisco Catalyst Blade Switch 3040 for FSC Hardware Installation Guide OL-10694-01 Append ix B Connector and Cab le Specifi cations Cable and Adapter Specif icati ons Figur e B-7 Identifying a Cros .
B-6 Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 Appendi x B Connector a nd Cabl e Specif ication s Cable and Ad apter Speci ficatio ns T able B-2 Console P or t.
C-1 Cisco Catalyst Blade Switch 3040 for FSC Hardware Installation Guide OL-10694-01 APPEND IX C Configuring the Switch with the CLI-Based Setup Program This chapte r prov ides a quick installati on and setup procedur e for the blade switch by using the comm and-l ine i nte rface ( CL I).
C-2 Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 Appendix C Configuring the Switch with the CLI-Based Setup Program Accessi ng the CLI Throu gh the Co nsole Port Note If the blade swit ches ar e ordered with the bla de serv er , the blade switc hes are already i nstalled, and no unpacki ng is requi red.
C-3 Cisco Catalyst Blade Switch 3040 for FSC Hardware Installation Guide OL-10694-01 Append ix C Configuring the Swi tch with the CLI -Based Se tup Program Accessi ng the CL I Throug h the Co nsole Po.
C-4 Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 Appendix C Configuring the Switch with the CLI-Based Setup Program Accessi ng the CLI Throu gh the Co nsole Port Step 5 W ait for the switch to complete flash ini tializati on.
C-5 Cisco Catalyst Blade Switch 3040 for FSC Hardware Installation Guide OL-10694-01 Append ix C Configuring the Swi tch with the CLI -Based Se tup Program Accessi ng the CL I Throug h the Co nsole Port Step 6 (Option al) Configure Simple Network Manage ment Proto col (SNMP) by respon ding to the pro mpts.
C-6 Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 Appendix C Configuring the Switch with the CLI-Based Setup Program Accessi ng the CLI Throu gh the Co nsole Port Step 10 Th ese choice s app ear: [0] Go to the IOS command prompt without saving this config.
IN-1 Cisco Catalyst Blade Switch 3040 for FSC Hardware Installation Guide OL-10694-01 INDEX Numerics 10/100/10 00 ports connec ting t o 2-18 conn ectors and cables B-1 t o B-2 descript ion 1-3 illustr.
Index IN-2 Cisco Catalyst Blade Switch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 conn ectors and cables 10/100/10 00 ports B-1 to B-2 console port B-3 to B-6 SC connec tors B-2 SFP module.
Inde x IN-3 Cisco Catalyst Blade Switch 3040 for FSC Hardware Installation Guide OL-10694-01 M manage ment blad e web interfac e descript ion 1-6 how to access 2-21 managing the b lade switch using SN.
Index IN-4 Cisco Catalyst Blade Switch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 system status/ID LED descript ion 1-4 location 1-2 T techn ical speci fication s A-1 Telnet, a nd acc essi.
Ein wichtiger Punkt beim Kauf des Geräts Cisco 3040 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Cisco 3040 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Cisco 3040 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Cisco 3040 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Cisco 3040 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Cisco 3040 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Cisco 3040 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Cisco 3040. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Cisco 3040 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
