Benutzeranleitung / Produktwartung DVR-16N des Produzenten Channel Vision
Zur Seite of 95
DVR-4N DVR-8N DVR-16N 4/8/16 Camera DVR INSTRUCTIONS 6 ; FF ; REW MENU STATUS ESC PIP MULTI ALARM RESET HOME D-ZOO M 9 78 CAMERA / NUMBER INPUT +10 0 4 1 5 2 6 3 REC PLAY STANDBY ! RX/TX HDD PRESET &q.
W ARNING This symbol is intended to alert th e user to the presence of unpr otected “Dangerous voltage" within the product's enclosure that may be strong enough to cause a risk of electric shock.
PRECAUTION All the safety and operating instructions must be read before the unit is operated. • Make sure to sw itch the pow er off before you install the DVR. • There is the danger of an electric shock if the DVR is opened by an unqualified service engineer or installer.
CONTENTS CONTENTS CHAPTER 1 FEATURES .............................................................................. 4 CHAPTER 2 PACKING DETAIL .................................................................... 6 CHAPTER 3 LOCATION AND CONTROL ......
FEATURES Chapter 1 Features Operation Playback, recording, backup and transmission simultaneously Real time single or multi-screen display Pan & Tilt, 2X/4X digital zoom and PIP display Easy operation by Jog shuttle, IR remote controller, external keypad controller and USB 2.
FEATURES Audio 4 channels audio recording in real time Copy USB 2.0 external HDD USB 2.0 memory stick CD-RW/ DVD-RW (option) General Softw are dow nloading facility via network and USB memory stick Au.
P ACKING DET AIL Chapter 2 Packing Detail 4. Remote controller 3. User ’s Manual 1. DVR 2. Network V iew er Program CD 5. R-HDD Rack Key (option) 7. Battery 6. Power Cord 1. DVR 2. Network Viewer Program CD 3. User ’s Manual 4. Remote Controller 5.
LOCATION AND CONTROL Chapter 3 Location and Control 3.1 FRONT PANEL CONTROLS 1 SPOT / ESC Button to control spot m onitor/ return to the previous menu 2 FUNCTION Using this button when y ou select “.
LOCATION AND CONTROL 3.2 REAR PANEL CONNECTORS Port Name Description 1 CAMERA IN BNC input ports for cameras 2 AUDIO IN RCA input ports for an audio signal(4CH Line input) 3 AUDIO OUT RCA output port .
INST ALLATION Chapter 4 Installation 4.1 TOTAL CONNECTION LAY-OUT 9.
INST ALLATION 4.2 INDIVIDUAL CONNECTION 4.2.1 Camera * Connect a female BNC connector of each camera to a male BNC connector, “CAMERA IN” port. * Connect the looping BNC output to other inputs as required.
INST ALLATION 4.2.2 Audio (*Refer to the specification) Audio Input - AUDIO IN : Connect the RCA Line Jack of the rele vant equipment (for example, a camera with a built-in microphone) to the AUDIO IN port. Audio Output - AUDIO OUT : Connect the RCA Line output to a monitor with a built-in speaker.
INST ALLATION 4.2.3 Monitor - Connect the female BNC for monitor output. EO monitor output. .2.4 Pow er - Auto-detect the correct voltage of power (110~240 VAC) - Connect the male Y/C cable socket for S-VID 4 - Connect the power cord.
INST ALLATION 4.2.5 USB 2.0 ports ○ 1 Three USB ports are provided to conn ect a U SB memory stick, exter nal storage devices and CD-RW/DVD-RW for video clip copyin g. One USB port is on the front panel an d the other two are on the rear panel. ○ 2 A USB mou se can be connected to one of the ports.
OPERATION Chapter 5 Operation 5.1 FACTORY DEFAULT MENU Setup> QUICK SETUP> QUICK SETUP…………………………..………OFF IMAGE SIZE………………………………………720x240 RECORD FRAME…………………………………60 EVENT……………………….
OPERATION ADD SPOT MULTI……………………………....OFF RECORD> RECORD SETUP RECORD PROGRAM..………………….……......6 RECORD PROGRAM (Refer to page 52) IMAGE QUALITY RECORD QUALITY……………………….…….....FINE AUDIO RECORD AUDIO 1……………….
OPERATION REC/PLAY CHECK…..………………….……………....…OFF VIDEO STANDARD…………….…………………………..AUTO LANGUAGE……………….………..………………….…….ENGLISH REMOTE CONTROL ID.…………….
OPERATION 5.2 FRONT PANEL CONTROLS 5.2.1 POWER ON/ OFF SWITCH(located in rear panel) After the connection of power cord and other devic es(HDDS) with this DVR, turn the power on.
OPERATION Use the + 10 Button when you select tw o digit camera numbers. EX) Camera Number 12 = Press the +10 Button , and then press the No. 2 Button .
OPERATION 5.2.3 RECORD Press the REC button and the following message will be displayed as below; MANUAL MODE Press the REC button to begin recording. To stop recording, press the REC button again. The screen will be turned into real time display mode.
- OPERATION 5.2.4.1 CALENDAR SEARCH At the SEARCH menu; ① Move the cursor to CALENDAR SEARCH using © or ª button. ② Press the ENTER button and CALENDAR SEARCH screen appears.
- OPERATION 5.2.4.2 SEARCH & COPY At the SEARCH menu; ① Move the cursor to SEARCH & COPY using © or ª button. ② Press the ENTER button and SEARCH & COPY screen appears.
- OPERATION 5.2.4.4 EVENT SEARCH At the SEARCH menu; ① Move the cursor to EVENT SEARCH using © or ª button. ② Press the ENTER button and the EVENT SEARCH menu screen appears.
- OPERATION ③ Select the desired HDD ID using the (-) or (+) button. ④ Move the cursor to the desired position of SEARCH TIME using the © , ª , § , ¨ buttons, and then set up the desired time using the(-), (+) buttons . (Or turn the wheel scroll of mouse to search the block list.
- OPERATION Press the ENTER button, and the list searched appears. When the list appears on the screen, select the desired list using © or ª buttons or wheel scroll <H e Bookmark list> huttle ring. l picture of the desired image. ARK list. t the SEARCH menu; E SEARCH using © or ª button.
- OPERATION 5.2.5 SEARCH BUTTON INFORMATION .1.5.1 SLOW ( ) e speed level which is slower than normal speed (X1) and displayed it at ack speed will be changed in the order of the below seven times slower than normal playback speed d .2 PLAY / PAUSE ( ) ormal speed (X1).
- OPERATION .2.6 JOG SHUTTLE INFORMATION .2.6.1 Normal Playback Mode esired playback direction and speed level according to the above ② mode when the SHUTTL E ring is returned to the center position. Frame by Frame Play back Mode image while the DVR is in the playback mode.
- OPERATION 5.2.7 DIGITAL ZOOM Press the desired camera number button you wish to display on the monitor. red location. .2.8 SCREEN SELECT(LV/PB) uring the playback, press the LV/PB button to convert the screen into real time display mode.
- OPERATION ** Please refer to 6.2.7 SPOT of SCREEN .2 Press the COPY button to copy the recorded images into other media and the COPY MENU screen .2.10.1 COPY .2.10.1-1 COPY TO EXTERNAL HDD (USB) At the COPY menu, o COPY using the © or ª buttons. ears.
- OPERATION ④ using the © or ª buttons and select the desired HDD to copy among ⑤ E/ COPY END TIME using the © , ** S g to the right to move the cursor of COPY END TIME o r to the left - I .2.10.1-2 COPY TO USB memory stick o COPY using the © or ª buttons.
OPERATION ** Scroll bar: - Turn the shuttle ring to the right to move the cu rsor of COPY END TIME or to the left to move the cursor of COPY START T IME and the cursor will be yellow. And the n turn the wheel scroll of mouse to mo ve the cursor to the desired time.
OPERATION When the copy is in process, the copying status(ex. “COPY 30%”) will be dis played on the right side of the monitor . NOTE - CD-RW or DVD-R W is option and this DVR nee d the interface board to install a bu ilt-in CD-RW or DVD-RW . - If you w ant a built-in CD-RW or DVD-R W , must purchase it from a authorized dealer .
OPERATION 5.2.10.3 MEDIA FORMAT At the COPY menu, ① Move the cursor to MEDIA FORMAT using the © or ª buttons. ② Press the ENTER button and the following screen appears. ③ Select formatting media using the (-), (+) button. ④ Move the cursor to MEDIA FORMAT and then press the “ENTER” button.
OPERATION ② Press the “PTZ” button to control pan, tilt and zoom functions of PTZ camera. ③ Use the § , ¨ button to pan left and right and the © or ª button to tilt up and down. ④ Turn the SHUTTLE ring to zoom in and out. ⑤ Use the (-) or (+) button to focus.
OPERATION 5.2.13 FUNCTION BUTTON <Audio select > You can select audio channels r egardless of monitoring screen. Press the “function(audio select)” button and then press the de sired number button and you can hear audio of selected channel regardless of monitoring screen.
- - 35 OPERATION 5.3 REMOTE CONTROLLER Button Name Description ○ 1 FUNCTION Refer to 5.2.13 FUNCT ION BUTTO N ○ 2 Z- Zoom out of PTZ ○ 3 IRIS - Iris close of PTZ ○ 4 COPY Display the copy menu ○ 5 RECORD ( ● ) Begin and stop recording ○ 6 ALARM RESET Release the event signal ○ 7 PLA Y / P AUSE( ) Press this button to begin playback.
- MENU SETUP Y ou n c on the M ○ 1 Status d of th * Y ou n c on the M ○ 1 Status d of th 5.4 MOUSE CONTROL * ca ca lick the below keys lick the below keys ENU screen with a mo ENU screen with a mouse.
- MENU SETUP Ch tup NTRANCE OF THE MENU SETUP ress the MENU button for the desired DVR setting. 6.1 QUICK SE This menu is simply used when user want to change just a few important settings.
- MENU SETUP 6.1. oll of mouse to use the QUICK SETUP .1.2 elect the desired IMAGE SIZE for recording using the (-), (+) buttons or wheel scroll of mouse. 6.1.3 ll of mouse. ** Please refer to chapter 6.3 RECORD. 6.1.4 EVENT Select a kind of EVENT using the (-), (+) buttons or wheel scroll of mouse.
- 39 MENU SETUP 6.1.8 REMOTE CONTROL ID et the REMOTE CONTROL ID using the (-), (+) buttons or wheel scroll of mouse. § , ¨ buttons in the MENU screen. button when the cursor is on the SCREEN icon and the following items appea r. ress the ENTER button when the cursor is on the POSITION and the following items appear.
- MENU SETUP ② Change the value of the HORIZONTAL mouse to adjust the horizontal position of the screen. POSITION using the (-), (+) buttons o r wheel scroll of to +4 and the default is “0”. heel scroll of mouse . t Move the cursor to the AUTO SEQUENCE using © or ª buttons.
- MENU SETUP 6.2.3 DISPLAY At ② ③ To exit this DISPLAY menu, press the ESC button. 6.2.3.1 HDD FREE SPACE At the DISPLAY menu, ① Move the cursor using the © or ª buttons to select the HDD FREE SPACE. ② Use the (-), (+) buttons or wheel scro ll of mouse to choose “ON” or “OFF”.
- MENU SETUP ON: The date and time 6.2.3.5 DATE&TIME MODE At the DISPLAY menu, ① Move the cursor using the © or ª buttons to sele the DATE&TIME MODE. ② Use the (-), (+) buttons or wheel scroll of mouse to choose “NUMBER” or “INITIAL”.
- MENU SETUP 6.2.4 TITLE At the SCREEN menu, using © or ª buttons. n the cursor is on the TITLE and the following 2 pages screen utton. en(for 16CH) using ① Move the cursor to the TITLE tton whe ② Press the ENTER bu appears. ③ Use the § , ¨ buttons to see the next page.
- MENU SETUP At the SCREEN me Move the cursor to the MULTI SCREEN using nu, © or ª buttons. using the © , ª , § , ¨ buttons and then press the ENTER button. MULTI SCREEN and the following screen To exit this MULTI SCREEN menu, press the ESC button.
- MENU SETUP [LIVE 13] ② Set the desired number of camera in each channel screen us ing the (-), (+) buttons or wheel scroll of mouse. ③ Use the © , ª , § , ¨ buttons to set the other channel screen. ④ T o exit this screen, press the ESC button.
- 46 MENU SETUP 6.2.7 SPOT At the SCREEN menu, ① Move the cursor to the SPOT using © or ª buttons. ② Press the ENTER button when the cursor is on the SPOT and the following screen appears. T . Use the (-), (+) buttons or wheel scro ll of mouse to select the SPOT MODE.
- 47 MENU SETUP or ª buttons. the RECORD SETUP and the following screen Move the cursor to choose the desired time using the © , ª , § , ¨ buttons.
- MENU SETUP ② Press the ENTER button when the cursor is on the RECORD PROGRAM and the following screen appears. Use the © , ª ③ , § , ¨ buttons to move the cursor to the desired item. ④ Select the desired RECORD TYPE using the (-), (+) buttons or wheel scroll of mouse.
- MENU SETUP < Result t able of tot al frame rate > Event Record Record T ype Image Size Normal Record Event Channel Other Channel Unit Single 360 x 240 Normal Frame ES_Frame RS_Frame CIF/1 SEC .
MENU SETUP < PROGRAM DEFAULT> These are 10 kinds of program and you can change the program setting. 6.3 ENTER button when the cursor i s on the IMAGE QUALITY and the following scree n ③ Select the desired RECORD QUALITY using the (-), (+) buttons or wheel scroll of mouse.
MENU SETUP 6 AU E At the RECORD menu, ① e the cur r to th UDIO ECORD using th © , ª buttons. ② s the ENTER button when the curso r is on AUDIO RECORD and the followi rs. (-), (+) buttons or wheel scroll of 6.3.5 REPEAT RECORD At the RECORD menu, ① Move the curs or to the REPEAT RECORD using , ª buttons.
MENU SETUP ③ Use the (-), (+) buttons or wheel scr oll of mouse to set “ON” or “OFF”. ursor to ”REPEA T RECORD ALARM” using © , ª buttons and then select the desired To exit this REPEAT RECORD menu, press the ESC button. 6.3.6 PLAY buttons.
53 MENU SETUP ③ Set up “ON” or “OFF” of HOLIDAY RECORD using the (-), (+) buttons or wheel scroll of mouse. (+) buttons or wheel ⑤ t up the EVENT menu, Press the ENTER button when the cursor is on the EVENT icon and the following items appear.
MENU SETUP 6.4.1.1 CHANNEL 6.4.1.1 CHANNEL At the MOTION DETECTION menu, Move the cursor t At the MOTION DETECTION menu, Move the cursor t ① o CHANNEL using © , ª buttons. or wheel scroll of mouse. Under Event option, move the cursor to the EVENT MESSAGE using © , ª buttons.
55 MENU SETUP 6.4.4 EVENT MESSAGE At Move the curs or to the EVENT MESSAGE using © , ª buttons. the EVENT menu, ① Select “ON” or “OFF” using the (-), (+) buttons or wheel scroll of mouse ② ON: The w arning messag 6.4.5 EVENT MESSAGE RESET At the EVENT menu, ① Move the curs or to the EVENT MESSAGE RESET using © , ª buttons.
MENU SETUP 6.4.8 RELAY OUTPUT At the EVENT menu, ① Move the cursor to the “RELAY OUTPUT” using the © , ª buttons. following screen appears. ③ Move the cursor using the © , ª , § , ¨ buttons and set up the value using the (-), (+) buttons or wheel scroll of mouse.
- 57 MENU SETUP 6.5 SYSTEM ① Move the curs or to the SYSTEM icon using the § , ¨ in the MENU screen. ② Press the ENTER button when the cursor is on the SYSTEM icon and the following items appear. 6.5.1 HDD At the SYSTEM menu, ① Move the cursor to the HDD using the © , ª buttons.
58 MENU SETUP ③ Use the © , ª , § , ¨ buttons to move the cu rsor and use t he (-), (+) buttons or whe el scroll of mouse to change the value. 6.5.1.2 REC HDD INITIALIZE At the HDD menu, ① Move the cursor to REC HDD INITIALIZE using the © , ª buttons.
- 59 MENU SETUP ③ If you want to initialize, move the cursor to “YES” nd then press the EN TER button. If not, move the cursor to “NO” and then press the ENTER button. ④ To exit this screen, press the ESC button. ⑤ To exit this HDD menu, press the “ESC” button again.
- MENU SETUP ③ Use the © , ª , § , ¨ buttons to move the cursor to the desired position of date or time. ④ Use the (-), (+) buttons or wheel scroll of mouse to modify the current date and time. - DATE: YYYY/MM/DD YEAR/MONTH/DAY - TIME : HH:MM:SS HOUR:MINUTE:SECOND ⑤ To exit this DATE & TIME screen, press the ESC button.
- MENU SETUP POWER OFF CHECK At the SYSTEM menu, ② PASSWORD and t he following screen ing the © , ª buttons. or is on the MASTER PASSWORD and the following ③ Insert the current password in the eight digits ******** beside OLD PASSWORD using the CAMERA/ NUMBER INPUT buttons.
- MENU SETUP ⑤ And you have to insert the same numbers again to verify the passwo rd after entering the NEW ⑥ he ESC button. t the PASSWORD menu, e SUPERVISOR PASSWORD using the © , ª buttons.
- MENU SETUP 6.5.3.5 REC/PLA Y CHECK At the PASSWORD menu, ① © , ª buttons. ② CK using the (-), (+) buttons or wheel scroll of mouse. 6.5.4 VIDEO STANDARD ttons. 6.5.5 LANGUAGE At the SYSTEM menu, ① Move the cursor to the LANGUAGE using th © , ª buttons.
- MENU SETUP 6.5.8 DVR INITIALIZE At the SYSTEM menu, Press the ENTER button when the cursor is on the DVR INITIALIZE and t he following screen the cursor to “YES” and then press the ENTER button. If not, move ess the ENTER button. Use the © , ª buttons to move the cursor.
- 65 MENU SETUP 6.6 LINK To set up the LINK menu, Move the ① cursor to the LINK icon using the § , ¨ in the MENU screen. g the © , ª buttons. Press the ENTER button when the cursor is on the NETWORK and the following scree n appears. Fixed IP> .
- MENU SETUP 6.6.1.2 IP ADDRESS At the NETWORK menu, ① Move the curs or to the IP ADDRESS using the © , ª buttons. ② Select the desired positi on using the § , ¨ buttons and set the data value using the (-), (+) buttons or wheel scroll of mouse .
- 67 MENU SETUP.
- MENU SETUP 6.6.2 RS - 232 At the LINK menu, Move the cursor to the RS-232 using the © , ª buttons. tton when the cursor is on the RS-232 and the following screen appears. S-232 menu, press the ESC button. At Move the cursor to the RS-422/485 using the © , ª buttons.
- 69 MENU SETUP 6.6.4 PTZ At the LINK menu, ① Move the cursor to the PTZ using © , ª buttons. ② Press the ENTER button when the cursor is on the PTZ and the following 2 pag es screen appears. select the right model of installed PTZ camera. ll of mouse to select the desired ID.
- MENU SETUP 6.6.5.1 SEND E-MAI t the E-MAIL menu, L the SEND E-MAIL using the © , ª buttons and select “ON” using the (-), ( +) .6 At the E-MAIL menu, ① Move the cursor to the SMTP SERVER using the © , ª buttons to input the e-mail sever address to be used by DVR.
- MENU SETUP .6.5.4 PASSWO 6 RD , ª buttons to input the account password to be ② Select the character using the © , ª , § , ¨ buttons and then press the ENTER button. To exit this CHARACTER TABLE screen, press the ESC button. put the e-mail address ned.
- MENU SETUP 6.7 SEARCH To set up the SEARCH m the enu, SEARCH icon using the § , ¨ in the MENU screen. Y ① Move the cursor to the COPY icon using the § , ¨ ② Press the ENTER button when the cursor is on the COPY icon and the following items appear.
- 73 MENU SETUP 6.9 EXIT ② Press the ENTER button when the cursor is on the EXIT icon and the following items appear. ired item using the © , ª buttons and press the ENTER button. o save the changed setup before At the MENU screen, ① Move the cursor to the EXIT icon using the § , ¨ buttons.
EXTERNAL TERMIN AL INFORMATION Ch 5 7.2 T.ADJ This function is not supported. apter 7 External Terminal Information 7.1 RS-422/48 This port can be used to connec t the external controller.
EXTERNAL TERMIN AL INFORMATION output by relay. 16C CH fo CH for alarm 1 to alarm 4 7.3 RELAY OUT For controlling alarm RS-422/485 / T-ADJ / RELAY OUT 10 9 11 13 12 16 15 14 19 20 18 17 NO. RS-422/485 / T-ADJ / RELAY OUT NO 1 CM 1 NC 1 NO 2 CM 2 NC 2 CM 3 CM 4 NC 4 NO 4 NC 3 NO 3 POWER / HDD ERROR MOTION DETECTION V - LOSS ALARM 1 13 14 25 7.
EXTERNAL TERMIN AL INFORMATION This DVR is compatible with TFT LCD monitor in PAL mode. s DVR lution & 70H z refreshed rate in NTSC/PAL mode. 7.6 SERIAL his DVR is compatible with TFT LCD monitor in PAL mode. (Reserved function, only to te chnical personnel for debug use.
- EXTERNAL TERMIN AL INFORMATION 7 ption): USB1 = USB_REAR1 7.8 REMOTE eserved Function /C : Not Connected No DESCRIPTION .7 Ethernet / USB For both 10Base-T and 100 Base-TX.
SPECIFICATIONS Cha pecifications pter 8 S 1. VIDEO Input Level 1.0 Vp-p±10% Composite, 75 Ω Balanced Video Standard NTSC(525 lines)/ PAL(625 lines)/ AUTO NTSC 240/120 (16/ 8/ 4CH Real Time) 480/ Display Speed PAL 200/100 fps (16/ 8/ 4CH Real Time) 400/ NTSC 720(H) X 480(V) Display Resolution PAL 720(H) X 576(V) Main 1.
- SPECIFICATION Remote Reserved Serial External control (RS-232C) / For debugging : 9 pins male DSUB PTZ control RS-485 Alarm Input 1 6 / 8 / 4C H Alarm Output 4 Relay output : 3 pins terminal block (Normal-Open, Normal-Close, Common) x 4 Et he rne t RJ45 connector, 10/ 100 Mbps 7.
- SPECIFICATION < Recording Speed T 16-CH DVR able > U n i t : f p s Model 8-CH DVR 4-CH DVR 360 x 240 120 120 120 720 x 240 60 60 60 NTSC 720 x 480 30 30 30 360 x 288 100 100 100 720 x 288 50 50 50 R S PAL 720 x 576 25 25 ecording peed 25 Compression Method MPEG4 G4 MPEG4 MPE < ording Ti 1.
HDD INST ALLATION PROCESS 8 STALL the INTE NAL HARD DRIVE(s). er or slave of HDD before fixing t he HD into DVR. Refe r to HDD jumper settin ation.) t up no. 1 and 3 by m ster and no. 2 an I SLOT DD INST ALLATION PROCESS 8 STALL the INTE NAL HARD DRIVE(s).
- NETW ORK VIEWER INST ALLATION Chap 9 TA T NETWO VIEWER FTWARE 9.1.1 Syste qu - Pentium III or above recommended - dows 2000 / XP 128MB RAM or above recommended Super VGA 16M or above recommended 10/100 base T network card for LAN operation .1.2 Network Environment ter 9 Network Viewer .
- NETW ORK VIEWER INST ALLATION 9 ○ ○ 2 Fill out T ype, DVR Name, IP address and Password to add t he desired units into the DV R in 9.2.2 ○ 1 In case of any changes, type new information into the box after selecting the de the list. ○ 2 Click the “Cha e” bu 9.
- NETW ORK VIEWER INST ALLATION 9.3 his menu allows you to detect all the units on the local network. 1 Click “Search DVR” button to display the “Search” menu window . ○ 2 Click the “Search” bu he twork will be detected and listed ○ 3 unit “Ad dd the unit into the “DVR list”.
NETW ORK VIEWER INST ALLATION 9.5 FILE SEARCH At the above main menu controller , ○ 1 Click the “File Search” button and the “File list” window will appear on the PC screen.
- NETW ORK VIEWER INST ALLATION * 1 site windows * 2 ~ 4 site windows *5 ~ 9 site windows *10~16 site windows .7 OPTION sert the CD into the CD-ROM drive, and then pl ease double-click the ic on of Dvrviewer a nd the llowing main menu controller will appear on the PC screen.
NETW ORK VIEWER INST ALLATION 9.8 CONTROL 9.8.1 Screen Display ages can be viewed in a full or multi format on each screen. . Full screen display Click the desired channel button and the full scr een of the channel will be displayed. ○ 2 . Auto Sequence display Click the “AUTO” button to view the full screen in sequence.
- NETW ORK VIEWER INST ALLATION 9.8.3 PTZ his menu allows you to control the PTZ camera through the network. Click the “PTZ” button to display the following PTZ controller . Click t and button to tilt up or down. Click t and button to pan lef t or right.
89 NETW ORK VIEWER INST ALLATION ○ 1 Click the “SETUP” bu connecting the view screen. (It is po tt he control menu bar to di splay the DVR setup scre en after ssible only for master connection.) on to store the current setup values. alues. s are modified, click th e “Update to DVR” but ton to update those value s into .
90 NETW ORK VIEWER INST ALLATION After connecting the view screen, And the preview window will be di splayed as the above picture. sired option and then click t he Print button of the preview window . sired image. e control window after setting the desired HDD and the time.
91 NETW ORK VIEWER INST ALLATION fter connecting the view screen, ton on the control menu bar to display t Select the desired HDD mode in the HDD dropdow n list, and then click the “Search” button. rded time information appears, select the desired “HDD ” and the “Channel” and me” for playback.
NETW ORK VIEWER INST ALLATION 9.8.12 BLOCK SEARCH Y ou can search and playback the images by the block. After connecting the view screen, ol menu bar to display the Block Search ○ 1 Click the “BLOCK” button on the contr window .
NETW ORK VIEWER INST ALLATION 9.9 KEY INFORMATION ○ 1 Click this button to pause the images during the playback or live. 9.9.2 PLA Y (Reverse & Forward) ○ 1 Use these buttons to playback images at normal speed in either direction. rward) ○ 1 s fast er than normal speed in either direction.
Channel V ision T echnology will repair or replace any defect in material or workmanship which occurs during normal use of this product with new or rebuilt parts, free of char ge in the USA, for two years from the date of original purchase. This is a no hassle warranty with no mail in warranty card needed.
Ein wichtiger Punkt beim Kauf des Geräts Channel Vision DVR-16N (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Channel Vision DVR-16N noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Channel Vision DVR-16N - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Channel Vision DVR-16N reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Channel Vision DVR-16N erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Channel Vision DVR-16N besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Channel Vision DVR-16N verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Channel Vision DVR-16N. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Channel Vision DVR-16N gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
