Benutzeranleitung / Produktwartung RC 9620 des Produzenten CDA
Zur Seite of 36
Customer Car e Department • The G r oup Ltd. • Harby Road • Langar • Nottinghamshi r e • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : service@cda.eu W : www .cda.eu Customer Car e Department • The G r oup Ltd. • Harby Road • Langar • Nottinghamshi r e • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : service@cda.
2 Important This appliance is designed and manufactur ed solely for the cooking of domestic (household) f ood and is not suitable for an y non domestic application and ther efore should not be used in a commer cial envir onment. The applianc e guar antee will be void if the appliance is used within a non domestic environment i.
3 Featur es and T echnical Dat a Vitr oceramic C ooking Hob 1 . 3 cir cuits cooking zone Ø 1 80 1 700 W 2. 3 circuits c ooking zone Ø 1 45 1 200 W 3. Oval cooking zone Ø 1 45 x 250 1 800/1 000 W 4. Double cooking zone Ø 2 1 0/1 20 2 1 00/700 W 5. 3 circuits c ooking zone Ø 1 45 1 200 W 6.
4 Contr ol Panel Contr ols Description 1 . F ront right c ooking zone contr ol knob 2. Rear right cooking z one contr ol knob 3. Centr al cooking zone contr ol knob 4. Rear left cooking z one contr ol knob 5. Fr ont left cooking zone control knob 6. Multifunction main oven switc h control knob 7 .
5 Electr onic Pr ogr ammer (Main Oven Only) The electronic pr ogrammer is a device that gr oups together the following functions: – 24 hour clock with illuminat ed display – Timer (up t o 23 hours and 59 minutes) – Pr ogramme f or automatic oven cooking – Pr ogramme f or semi-automatic oven cooking.
6 Electr onic Clock (fig. 4) The programmer is equipped with an electr onic clock with illuminated numbers which indicates hours and minutes. Upon immediate connection of the oven or after a pow er cut, three zer os will flash on the progr ammer display.
7 Aut omatic Ov en Cooking T o cook food automatically in the oven, it is nec essary to: 1 . Set the length of the cooking time 2. Set the end of the cooking time 3. Set the temperatur e and the oven cooking progr am. These operations ar e done in the following way: 1 .
8 Semi - Aut omatic Cooking This is used to switc h the oven off automatically after the desired c ooking time has elapsed. There ar e two ways t o set the semi-automatic cooking function: 1 . Set the length of time you need to cook the food by pushing the button and the button to advance, or to go backwar ds (Fig.
9 How t o Use the Vitr ocer amic Hob The ceramic surfac e of the hob allows a fast transmission of heat in the vertical direction, from the heating elements underneath the ceramic glass t o the pans sat on it.
10 Double and Ov al Radiant Zones The heating element is f ormed of a coil of resistant material which r eaches the working temper ature quic kly. Operation of the cooking zone is c ontrolled by a continuous energy regulator from “1” to “1 2” (maximum temperatur e) (fig.
11 After a short period of use, experience will teach you which setting is the right one for y our needs. Cooking Hints = W arming = Cooking = Roasting - F rying P osition T ype o f cooking 0 0 Switched OFF 1 2 1 2 For melting oper ations (of butter or c hocolate).
12 Residual Heat Indicat or The hob also featur es 5 warning lights which are c onnected to the corr esponding plates. When the temper ature of a cooking plate is above 60°C, the r elevant warning light will also light up to warn of heat on the surface of the hob.
13 Safety Hints: – Befor e you switc h the hob on, make sur e y ou know which knob controls the requir ed cooking plate. W e advise you t o set the pan over the cooking plate befor e switc hing it on. Remove the pan after you have switc hed the cooking plate off.
14 How t o Use the Multifunction Main Oven Gener al Featur es As its name indicates, this is an oven that pr esents particular f eatur es fr om an operational point of view . In fact, it is possible to insert 7 differ ent programmes to satisfy ev ery cooking need.
15 Function Select or knob (fig. 2 1) Rotat e the knob clockwise to set the ov en for one of the f ollowing functions. Ov en Light By setting the knob to this position, only the oven light c omes on. It remains on in all the c ooking modes. T raditional C onv ection Cooking The upper and lower heating elements come on.
16 Grilling The infrar ed grill element comes on. The heat is dispersed by radiation. Use with the ov en door closed and the thermostat knob to position 225°C for max 1 5 minutes, then to position 1 75°C. For cooking hints, see the c hapter “USE OF THE GRILL ”.
17 V entilat ed Grill Cooking The infr ared grill element and the fan come on. The heat is disper sed mainly by radiation and the fan then distributes it all over the oven. Use with the door closed. The temper ature can be regulated via the thermostat knob to between 50° and 1 75° max.
18 Cooking A dvice St erilization Sterilization of f oods to be conserved, in full and hermetically sealed jars, is done in the f ollowing way: a. Set the switch to position . b. Set the thermostat knob to position 1 85 °C and preheat the oven. c. Fill the dripping pan with hot water .
19 Roasting T o obtain classical roasting, it is necessary to r emember: – that it is advisable to maintain a temper ature between 1 80° and 200 °C. – that the cooking time depends on the quantity and the type of foods. Use of the Grill – Preheat the ov en for about 5 minutes.
20 How t o Use the Conv entional Ov en Gener al Featur es As its name indicates, this is an oven that pr esents particular f eatur es fr om an operational point of view .
21 Function Select or Knob (fig. 22) Rotat e the knob clockwise to set the ov en for one of the f ollowing functions. Ov en Light By setting the knob to this position, only the oven light c omes on. It remains on in all the c ooking modes. T r aditional Con vection C ooking The upper and lower heating elements come on.
22 Use of the Grill Switch the grill on, set ting the two knobs: – Function selector t o or position. – Thermostat selector to position 225°C f or 1 5 minutes then to 1 75°C . Lea ve to warm up f or appr oximately 5 minutes with the door closed .
23 Do’s and do not’s – Do always grill with the ov en door closed. – Do read the user instructions car efully before using the c ooker for fir st time. – Do allow the oven to heat for one and a half hours, bef ore using for the first time, in order to expel any smell from the new ov en insulation, without the introduction of f ood.
24 Car e and Maintenanc e Important: As a safety measur e, before you st art cleaning the cooker be sur e to disconnect it fr om the mains supply. – Do not use cleaning pr oducts with a chlorine or acidic base. – Do not use a steam cleaner because the moisture can get into the appliance thus make it unsafe.
25 Remo v al of the Inner Glass Door P anel – The inner glass door panel can easily be remov ed for cleaning by unscr ewing the four screws (fig. 25). – When re-assembly ensure that the inner glass is correctly positioned and do not over tighten the screw s.
26 Inside of Ov en The oven should alwa ys be cleaned after use when it has cooled down. The cavity should be cleaned using a mild detergent solution and warm water . Suitable propriet ary chemical cleaners ma y be used after first consulting with the manufactur ers r ecommendations and testing a small sample of the oven cavity.
27 Remo ving the Ov en Door Please operate as f ollows: – Open the door completely . – The s wivel retainer s of the rh and lh hinges (fig. 29a) are hooked onto the metal bar above them (fig. 29b). – Lift the oven door slightly . The noch on the bott om of the hinge will disengage (fig.
28 FOR THE INS T ALLER Location The appliance may be installed in a kitchen, Kitchen/diner or a bed sitting room, but not in a room or spac e containing a bath or a show er . The appliance must not be installed in a bed-sitting r oom of less than 20 m 3 .
29 Fitting the A djustable F eet – The adjustable feet must be fit ted to the base of the cook er befor e use. – Rest the r ear of the cooker an a piece of the polystyrene pac kaging exposing the base for the fitting of the feet. – Fit the 4 legs by screwing them tight int o the support base as shown in picture 33.
30 W arning T o move the cook er always ensur e two people carry out this manoeuvre t o prev ent damage to the appliance (fig. 34). W arning Be car efull: do not lift the cooker by the door handle (fig. 35). W arning When moving cooker to its final position DO NO T DRAG (fig.
31 St ability Br ack et We recommend a stability bracket is fitted to the cooker. The type shown in fig. 39 can be purchased from most plumbers merchants and do it yourself (D.I.Y.) shops. Brac kets Existing slot in rear of c ooker Dotted line showing the position of cooker when fix ed Fig.
32 Electrical Installation IMPOR T ANT : The cook er must be installed in accor dance with the manufactur er’s instructions. Incorr ect installation, f or which the manufactur er accepts no r esponsi bility , ma y cause injury to per sons, animals or equipment.
33 Connecting the pow er cor d must be entrusted to skilled personnel in accor dance with the instructions supplied b y the manufactur er and in compliance with established safety standar ds. Connecting the Mains Cable T o connect the feeder cable to the cook er it is necessary to: – Remove the tw o screws that hold shield A behind the cooker .
34 Appliance Servicing CDA pr ovide a quality and effective after -sales service to cov er all your servicing needs. Please attac h your r eceipt to this page f or safekeeping. Please help us to help you by ha ving the following inf ormation available when booking a servic e-call: 1 .
35 Guar antee CDA applianc es carry a five-year parts and a one-year labour guar antee. CDA will repair or replace any defect or part attributable to faulty material or workmanship. Within the first year this will be free of both labour and parts char ges.
Customer Car e Department • The G r oup Ltd. • Harby Road • Langar • Nottinghamshi r e • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : service@cda.eu W : www .cda.eu T o contact our Cust omer Car e Department, or for Service, please contact us on the det ails below .
Ein wichtiger Punkt beim Kauf des Geräts CDA RC 9620 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie CDA RC 9620 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für CDA RC 9620 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von CDA RC 9620 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über CDA RC 9620 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon CDA RC 9620 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von CDA RC 9620 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit CDA RC 9620. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei CDA RC 9620 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
