Benutzeranleitung / Produktwartung DV 770 des Produzenten CDA
Zur Seite of 48
Customer Car e Department • The G r oup Ltd. • Harby Road • Langar • Nottinghamshi r e • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : service@cda.
2 Important This appliance is designed and manufactur ed solely for the cooking of domestic (household) f ood and is not suitable for an y non domestic application and ther ef ore should not be used in a commercial envir onment. The applianc e guar antee will be void if the appliance is used within a non domestic envir onment i.
3 Befor e Using for the Fir st Time – Read the instructions car efully befor e installing and using the applianc e. – After unpacking the appliance, check that it is not damaged. In case of doubt, do not use the appliance and contact your supplier or a qualified engineer .
4 Important Saf eguar ds and R ecommendations – Do not carry out any cleaning or maintenance without fir st disconnecting the applianc e from the electrical supply. – During and after use of the double oven, cert ain parts will become very hot. Do not touc h hot parts.
5 T op Ov en Contr ols Contr ols Description 1 . T emperatur e knob 2. Cooking functions knob 3. T op oven power ON indicator lamp 4. T op oven temperatur e indicator lamp 1 4 2 3 Fig.
6 Oper ating Principles Heating and cooking in the natural c onvection oven ar e obtained: a. by Normal C onv ection The heat is produc ed by the upper and lower heating elements. b. by Radiation The heat is radiated by the infr a r ed grill element. Att ention: the ov en door becomes v ery hot during oper ation.
7 Thermostat Knob (Fig. 2) This only sets the cooking temper ature and does not s witch the ov en on. Rotat e clockwise until the r equir ed temperatur e is r eached (fr om 50 °C to 250 °C). The thermostat indicator light will illuminate when the oven is switc hed on and turns off when the oven reac hes the corr ect temper ature.
8 Ov en Cooking Befor e intr oducing the food, pr eheat the oven to the desir ed temper ature. For a correct preheating operation, it is advisable to remove the tray from the oven and introduc e it together with the food, when the ov en has reac hed the desir ed temperatur e.
9 Lo w er Main Ov en Contr ols Contr ols Description 1 . ON/OFF selection 2. T emperatur e and progr ammer functions regulation, Childloc k selection 3. Progr ammer functions selection 4. Oven functions selection 5. Functions displa y 6. Clock/Pr ogrammer displa y 7 .
1 0 “T ouch-contr ol” k eys The “touch-c ontrol” k eys shall be operated by the finger s (just by touching the k ey). When using touch c ontrols it is best t o use the ball of your finger rather than the tip.
1 1 Oper ating Principles Heating and cooking in the FULL ELECTRONIC MUL TIFUNCTION oven are obtained in the following w ays: a. by Normal con vection The heat is produc ed by the upper and lower heating elements.
1 2 150 125 100 75 50 Lit = minute minder in operation Flashing = countdown completed by the minute minder Lit = operation of heating elements (cooking functions) Flashing = semi-automatic or automati.
1 3 Electr onic Contr oller Featur es It performs the f ollowing functions: – 24 hours cloc k with illuminated display . – Timer (minute minder: up t o 600 minutes - 1 0 hours). – Progr amme for semi-aut omatic oven cooking (up to 600 minut es - 1 0 hour s - of cooking time).
1 4 T urning the Oven On and Off T o turn the oven ON: – T ouch the k ey “ ” and hold until “ On ” appear s on the clock/pr ogrammer display . – Y ou can now oper ate your oven. The time of the day appears on the clock/pr ogrammer display (followed by the progr amme number “ Pr0 1 , Pr02, .
1 5 Childlock Saf ety T o activate the Childlock option touch the “ ” and “ ” keys simultaneously and hold until the clock/progr ammer display shows “ n--0 ” and then “ On ”. Then the time of the da y appears again (follow ed by the selected progr amme number “ Pr0 1 , Pr02, .
1 6 Oven C ooking Function When selection a cooking function the relativ e progr amme number and the symbol ar e activated . Set Oven F unction K ey Decreasing Set Oven F unction K ey Increasing Setting Setting Clock/ Pr ogr ammer Displa y Functions Displa y Using the Lo w er Main Oven Selecting the Cooking F unctions Fig.
1 7 Cooking T emperatur e All cooking functions start to oper ate with a pr e-set temper ature whic h can be modified, at any time, by touching the r elative “+” and “–” k eys positioned below the temperatur e display . Childlock Symbol When the symbol is permanently lit the Childlock option is activ ated.
1 8 Using the Lo w er Main Oven Cooking F unctions T urn on the oven as indicated in the “TURNING THE OVEN ON AND OFF” chapter . Select the oven function and temperatur e as indicated in the previous pages. IMPOR T ANT : the cooking function and temper ature can be modified at any time during the normal, semi-automatic or aut omatic cooking.
1 9 Fan L ow er Heat The lower heating element and the fan motor ar e swit ched on. The heat coming from the bottom is diffused by forc ed convection and the temperatur e must be set between 50 and 250°C. The pre-heating temperatur e is set at 1 90°C.
20 V entilated Grill Cooking The infrar ed heating element and the fan ar e switc hed on. The heat is mainly diffused by radiation and distributed by the fan thr oughout the oven. Use with the oven door closed and the temper ature betw een 50 and 200°C maximum.
2 1 Con vection C ooking With F an The upper and low er heating elements and the fan ar e s witched on. The heat from the top and the bottom is diffused by fan conv ection. The temper ature can be set between 50 and 250°C. The pre-heating temperatur e is set at 1 75°C.
22 Special “Booster” Pr ogr amme This special progr amme allow a fast pre-heating of the cavity by a combination of the heating elements. VER Y IMPORT ANT NO TE: This special progr amme must be oper ated without f ood inside the ov en ca vity . Introduc e the food to be cook ed only at the end of the BOOSTER pr ogr amme.
23 Using The Ov en Manually T urn the ov en ON as indicated in the “TURNING THE O VEN ON AND OFF” chapter . Operate the oven manually by selecting the oven function and temperatur e as indicated in the “SELECTING THE COOKING FUNCTIONS” and “SELECTING THE TEMPERA TURE” chapter s.
24 Using The Ov en Aut omatically Use automatic cooking to automatically turn the oven on, cook, and then turn the oven off. 1 . Check the clock shows the corr ect time. 2. Select the function and temperatur e. The oven will c ome on. 3. Decide how long the food will tak e to cook, allowing time f or pre-heating if nec essary.
25 Cooking A dvice St erilization Sterilization of foods to be conserved, in full and hermetically sealed jars, is done in the following wa y: a. Set the switch to position . b. Set the thermostat knob to position 1 85 °C and preheat the oven. c. Fill the dripping pan with hot water .
26 Grilling and “ Au Gr atin” Grilling may be done by selecting the function because the hot air completely env elops the food that is to be c ooked. Set the temperature between 50 and 200°C maximum and after having preheat ed the oven, simply place the f ood on the grid.
2 7 Do’s and do not’s – Do always grill with the ov en door closed. – Do read the user instructions car efully bef ore using the double ov en for first time.
28 Car e and Maintenanc e It is advisable to clean when the appliance is cold and especially for cleaning the enamelled parts. Av oid leaving alkaline or acidic substances (lemon juice, vinegar , etc.) on the surfaces. Av oid using cleaning products with a c hlorine or acidic base.
29 St ainless St eel, Aluminium, Paint ed Parts and Silk-scr een Printed Surfac es Clean using an appropriat e product. Alw ays dry thor oughly. Stainless steel surfaces: can be cleaned with an appropriate stainless steel cleaner . IMPOR T ANT : these parts must be cleaned very car efully t o av oid scrat ching and abrasion.
30 Replacing the Halogen Ov en Lights W ARNING: Ensure the appliance is swit ched o ff befor e r eplacing the lamp to a v oid the possibility of electric shoc k. – Let the oven ca vity and the heating elements to cool down; – Switch off the electrical supply; – Remove the pr otectiv e cover C (fig.
3 1 Assembling and Dismantling of the Side R unner Fr ames – Assemble the wire r acks t o the oven walls using the 2 scr ews (Figs. 1 2-1 4). – Slide the tray and rack into the runners (Figs. 1 3-1 5). The rac k must be fitted so that the safety catch, which stops it sliding out, fac es the inside of the oven.
32 Ov en Doors Remo ving the Ov en Doors The oven doors can easily be r emoved as f ollows: – Open the door to the full extent (fig. 1 6a). – Open the lever A completely on the left and right hinges (fig. 1 6b). – Hold the door as shown in fig. 1 6.
33 Ov en Doors - R emo v able Inner P ane of Glass Cleaning the Panes o f Glass The oven doors ar e fitt ed with no. 2 panes: - no. 1 outside; - no. 1 inner; T o clean the panes on both sides it is necessary to remov e the inner pane as follows.
34 Replacing the Inner P ane of Glass 1 . Make sure the door is lock ed open (see fig. 1 9). 2. Replace the inner pane: – Check that the f our rubber pads are in plac e ( D in Fig. 22). – Check that you are holding the pane the correct way . Y ou should be able to r ead the wor ding on it as it faces you.
35 AD VICE FOR THE INS T ALLER Important Appliance installation and maintenanc e must only be carried out b y QU ALIFIED TE CHNICIANS and in compliance with the local saf ety standar ds. • Failur e to observe this rule will in validate the warr anty.
36 Installation "A" betw een Existing Side Cabinets (560 or 600 mm GAP) (figs. 28, 29, 30, 3 1) – Mount the 2 (two) metal supports “ B ” (supplied with the appliance in a separat e kit) as indicated in Figs.
3 7 544 20 538 7 1 8 595 600 W ARNING ! VER Y IMPOR T ANT The underside o f the cabinet shall be opened to allo w corr ect air circulation. 7 20 min ( * ) B 5 70 min 20 22 1 5 20 - 50 1 8 A B 650 A Support base ( * ) Measure calculated from the underneath of the w orktop to the t op support base of the “ B ” supports.
38 Installation "C" By Using Housing Unit (figs. 33, 34, 35) • Remove the single ov en shelf, if fitted, as indicated in figur e 33. • Remove the upper cr oss member support as indicated in figur e 34. • Cut the bottom of the housing as indicated in figur e 34.
39 Fig. 8.3b Remove single oven shelf, if fitted. Cabinet f or installing the oven Fig. 33 544 20 538 7 1 8 595 B Fig. 35 40 30 600 B 7 20 min 42 B Support base 40 Measure calculated fr om the underneath of the worktop to the top support base of the “B” supports.
40 Fixing the Double Ov en The double oven should then be secured by 6 scr ews (not supplied) fitted into the holes provided at the sides of the oven (Fig. 36). If you open the oven door s, you will see some scr ew holes. Remember the housing should not be fr ee standing but be secur ed to the wall and/or adjac ent fittings.
4 1 IMPOR T ANT : – T o avoid damage to the low er trim please note the f ollowing instructions. – The lower trim is designed to allow f or good air cir culation and the corr ect opening of the oven door .
42 Electrical Installation For your saf ety please r ead the follo wing information: W ARNING! Before effecting any intervention on the electrical parts the appliance must be disconnected fr om the netw ork. IMPOR T ANT : The oven must be installed in accor dance with the manufacturer’s instructions.
43 Connection the Double Ov en Mains Cable Important! This ov en must be connect ed to the mains po wer supply only b y a suitably qualified per son. Unscrew the scr ews A securing the c over plate B behind the oven (fig. 40). – Remove the c over plate B .
44 Appliance Servicing CDA pr ovide a quality and eff ective after -sales service to cover all your servicing needs. Please attac h your r eceipt to this page f or safekeeping. Please help us to help you by ha ving the following inf ormation available when booking a servic e-call: 1 .
45 Guar ant ee CDA applianc es carry a five-year parts and a one-year labour guar antee. CDA will repair or replace any defect or part attributable to faulty material or workmanship. Within the first year this will be free of both labour and parts char ges.
46.
4 7.
Customer Car e Department • The G r oup Ltd. • Harby Road • Langar • Nottinghamshi r e • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : service@cda.eu W : www .cda.eu T o cont act our Customer Car e Department, or for Servic e, please contact us on the det ails below .
Ein wichtiger Punkt beim Kauf des Geräts CDA DV 770 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie CDA DV 770 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für CDA DV 770 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von CDA DV 770 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über CDA DV 770 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon CDA DV 770 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von CDA DV 770 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit CDA DV 770. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei CDA DV 770 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
