Benutzeranleitung / Produktwartung XJ-A235V des Produzenten Casio
Zur Seite of 45
1 DATA PROJECTOR XJ-A135V/XJ-A145V/XJ-A155V/ XJ-A235V/XJ-A245V/XJ-A255V Data Projector Wireless Function Guide Be sure to rea d the precaution s in the User’s Guide (Basic Operati ons) that comes with the Data Projector. Be sure to keep all user docume ntation handy for future reference.
2 Contents About This Manual... . .............................. ........................ 5 Terms and Conventions ............................................. ............................5 What the Wireless Functio n Lets You Do... ..................
3 Configuring Security Settings for a Wireless LAN Connection ...................... .............................. ................ 18 Security Setting Flow ...................................................................... ..... 18 Configuring Security Settings .
4 Appendix ........................................................ ................ 37 Using the Token Wizard ............................................. ..........................37 Installing Wireless Connection 3 on USB Memo ry ................ .
5 About This Manual... This manual explains how to establish a wireless LAN conne ction between a CASIO XJ-A 135V, XJ-A145V, XJ-A155V, XJ-A235V, XJ -A245V, XJ-A255V Data Projector and a computer, and send computer screen contents to the projector for proje ction.
6 What the Wireless Function Lets You Do... The projector has a built- in function that l ets it operate as a wi reless LAN access po int. After a wireles s LAN connection is establishe d with a computer, the contents of the computer screen c an be sent to the projector fo r projection.
7 Projector Requirements The projector must meet the fo llowing conditio ns in order to use a wireless LAN co nnection to project computer screen contents . The wireless adap ter that comes wi th the projector must be installe d correctly o n the projector.
8 Installing Wireless Connection 3 Important! The latest vers ion of the computer s oftware in cluded on the C D-ROM that comes with this product is available for download at the CASIO website URL bel.
9 1. Place the CD-ROM that comes with the pr ojector into your computer’s CD-ROM drive. This will automati cally display the CD-ROM menu sc reen. 2. On the menu screen, click the [Install] button to th e right of “Wire less Connection 3”. Follow the instructio ns on the dialog boxe s that appear on the screen.
10 Establishing a Wireless LA N Connection between the Projector and a Computer This section explains how to establish a wireless LA N connection between the pro jector and a computer under the projecto rs initial default “Wi reless” settings . “Wireless” is one o f the projector’s built-i n applic ations.
11 Wireless is one of the pr ojector’s buil t-in applica tions. It make s it possibl e to establish a wireless LAN connection between the pro jector and a co mputer, and project the co mputer’s display contents. To perform wirel ess projection Press the [INPUT ] key and sele ct “Wireless ” as the input source .
12 Wireless Connecti on 3 is control soft ware for a computer that conne cts to the projector vi a wireless LAN connection. To start up Wireless Connection 3 Perform either of the following oper ations to start up Wireless Connection 3 on the computer.
13 To display Wireless Connection 3 help On a Wireless Connection 3 window , clic k the function menu button and then click [H elp] on the menu that appears. To display Wireless Connecti on 3 version information On a Wireless Connection 3 window , click the function menu bu tton and then click [About] on the menu that appears.
14 To use a default SSID to connec t a computer to the projector via wireless LAN 1. Turn on the projector and wait until th e POWER/STANDBY indicator is lit green. 2. Press the [INPUT] key and select “Wireless” as the input source. This will project the Wi r eless standby screen.
15 6. When everything is the way you want, click [OK]. This establishe s a wireles s LAN connection between the projector and c omputer, and causes the computer screen co ntents to be projected from the pr ojector. The following shows the Wirele ss Connection 3 window that appe ars on the computer screen.
16 Wireless LAN Connection when Us ing Multiple Projectors at the Same Time When using two or more projec tors in the same location (same m eeting room, etc.), each one i s identified by a unique SSID (serv ice set identifier) that lets each computer keep track of which projector it is connected to.
17 Wireless Connection when the Computer Finds Mult iple Projectors If the computer finds more than one pr ojector it can connec t to in step 4 of the procedur e under “To use a default SSID to connec t a co mputer to the projector via wireless LAN” (pa ge 14), a dialog box like the one shown below wil l appear on the computer screen.
18 Configuring Security Setti ngs for a Wireless LAN Connection Configuring security setti ngs prevents unauth orized access to a com puter or projector ov er the wireless LAN. Setti ngs are confi gured with the projec tors System Admi n page, which can be a ccessed with a computer’s web bro wser.
19 This section explains the pr ocedure for logg ing in to the projector’s S ystem Admin page fr om a computer and configuring wireless LAN connection security settings.
20 4. Click the [Login] button. This logs in to the Sys tem Admin page and displays the Status screen. Note For security reas ons, be sure to ch ange the pa ssword you use to log in to System Admin page from the default. For mor e information, see “T o change the System Ad min login password” (page 32).
21 To configure security settings 1. Perform the procedure under “To log in t o the projector’s Sys tem Admin page” (page 19) to log into System Admin. 2. Click “Setup” to display the System Admin page Setup screen. Changing only the three settings encl osed in the boxes above are r equired to configur e security settings.
22 5. Enter the passphrase (or WEP key). The passphrase or WEP key entered in the “Pas sphrase/WEP Key” text box depends on the security protocol you selected in step 4, as described below.
23 The procedures i n this section star t from the point that a single projec tor is projecting the Wireless standby screen fo llowing configurati on of security settings. The y also assume that the compute r was restarted after setting s were configured.
24 Note When establishi ng simultaneous wire less LAN connections betwe en a single proj ector and multiple computers, use the sam e procedure as above for the s econd and subsequent computers.
25 Wireless LAN Connection Operations This section explains operat ions you can perfo rmed after a wirele ss LAN connection is established between the projector and a c omputer.
26 Starting and Stopping Projection from a Computer Connected via Wireless LAN Connection Starting 1-scree n Projection On the computer from which you want to start 1- screen projection, c l ick the button on the Wireless Connection 3 window. The bu tton will change to and 1-screen proj ection will start from the computer.
27 To project the display contents of four computers simultane ously (4-screen projection) 1. Establish a wireless LAN connection between the projector and the first computer, and then click the button. This will caus e the display contents of the first computer to appear in the upper left corner of the 4-screen projection.
28 Displaying the User Name on the Projection Screen Pressing the projec tor’s remote control ler’s [ f ] key displays the appl icable computer user name o n the projection scree n. In the case of 4-scre en projection, the name is displa yed in the area where the computer screen imag e is being projec ted.
29 Terminating a Wirele ss LAN Connection Use Wireless Connection 3 to terminate a wire less LAN connection betw een the projector and a computer. Click the close button in the upper right corner of the Wir eless Connection 3 window.
30 Configuring Wireless Settings You can use the projector’s setup menu to configur e the Wireless function settings described below. Note More advanced proj ector wirele ss LAN connection settings (connect ion setup, se curity settings, etc.
31 To initialize the Wireless setup 1. While the Wireless screen is bein g projected, press the [MENU] key. 2. Use the [ ] key to move the hi ghlighting to “Wireless” and th en press the [ENTER] key. 3. Use the [ ] key to move the highl ighting to “Initialize W ireless Setup” and then press the [ENTER] key.
32 System Admin Page Operations and Settings While the proj ector is connected to a computer via wir eless LAN, you can use the computer’s web browser to access the projector’s System A dmin page. The System Adm in page can be used to configure the projec tor’s wireless LA N connection settings from your computer.
33 3. Enter the new password twice into th e “New Password” and the “Reinput Password” input boxes. You can enter up to eight ch aracters as the pa ssword. Note that you will need the pa ssword you enter here the next ti me you log in to the S ystem Admin page.
34 To configure pro jector network settings and wireless L AN connection settings 1. Establish a wireless LAN connection be tween the projector and computer, and log in to the p rojector’s System Admin screen from the projector. 2. Click “Setup” to display the System Admin page Setup screen.
35 Initializing All Syste m Admin Page Settings This operation returns all of the settings on the Syst em Admin page to their in itial factory defaults.
36 System Admin > Setup Settings System Admin > Change Password System Admin Page Settings Setting Name Description IP Setup IP Address Specifies the projector IP address. Initial Default: 192.168.100.10 Subnet Mask Specifies a subnet mask value, whic h specifies the IP address range of the subnet to which the projector belongs.
37 Appendix You can use the Wirele ss Connection 3 token wizard to copy Wirel e ss Connection 3 to USB memory. After you do that, you ca n run Wireless Conne ction 3 on a comput er that does not have th e program installed simply by plug ging the USB me mory (called a “USB To ken”) into the computer’s USB port.
38 1. On a Wireless Connection 3 window, cli ck the function me nu button and then click [Token Wizard] on the menu that appears. This displays the toke n wizard. 2. Click [Next>]. This displays a US B drive selecti on screen. If there is n o USB memory c o nnected to the computer, the me ssage “USB memory could not be detected.
39 The projectors come wi th wireless adapte rs YW-3 (either built-in or s upplied separately). Yo u can install and remove the wirel ess adapter as re quired. Important! Keep the wireless adapte r in a safe place when it is not installed on the pr ojector.
40 To remove the wireless ad apter from the project or 1. Turn off the proj ector and unplug it s power cord from the power outlet. 2. Loosen the two screws that secure the wireless ad apter cover, and then pull the top of the cover towards you to remove it.
41 Check the following points whenev er you are ha ving problems with a wireless LA N connection. Wireless LAN Connection betw een the Projector and a Computer Wireless LAN Connection Troubleshooting Problem Cause and Required Action [Reconnect] re mains on the Wireless Connection 3 window and t he computer won’t conne ct to the projector.
42 Simultaneous Wireless LAN Connections with Multiple Projectors Problem Cause and Required Action Refer to: Wireless Connection 3 is running on my computer, but the Projector List dialog box won’t display. Make sure all of the projecto rs are turned on.
43 System Admin Page Performing Wireless Op erations from a Computer Problem Cause and Required Action Refer to: The System Admin page does not appear when I try to access it from Wireless Connection 3. The browser you are using may be co nfigured to use a proxy serve r.
44 Wireless Connection 3 Error Messages System Admin Page Error Messages Note For information about er ror messages tha t appear on the projection sc reen, see the User’s Guide (UsersGuide_English.pdf). Error Messages Error Message Cause and Required Action Could not connect to projector.
MA1008-A.
Ein wichtiger Punkt beim Kauf des Geräts Casio XJ-A235V (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Casio XJ-A235V noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Casio XJ-A235V - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Casio XJ-A235V reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Casio XJ-A235V erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Casio XJ-A235V besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Casio XJ-A235V verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Casio XJ-A235V. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Casio XJ-A235V gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
