Benutzeranleitung / Produktwartung BP7714000 des Produzenten AEG
Zur Seite of 32
BP7614000 BP7714000 EN OVEN USER MANUAL.
FOR PERFECT RESULTS Thank you for choosing th is AEG product. We have created it to give you impe ccable performance for many years, with innovative techno logies that help make life simpler – features you mi ght not find on ordinary appliances. Please spend a fe w minutes reading to get the very best from it.
CONTENTS 4 Safety information 8 Product description 9 Before first use 10 Control panel 12 Daily use 14 Clock functions 16 Automatic programmes 18 Using the accessories 20 Additional functions 22 Care.
SAFETY INFORMATIO N Before the installation and use, read this manual carefully: • For your personal safety and the safety of your property • For the respect of the environment • For the correct operation of the appliance. Always keep these instructions with the appliance also if you move or sell it.
• You must have correct isolation devices: line protecting cut - outs, fuses (screw type fuses removed from the holder), earth leakage trips and contactors. • The shock protection parts must be fixed in such a way that they cannot be undone without tools.
• Be careful when you remove or install the accessories to prevent damage to the oven enamel. • Always stay away from the appliance when you open the door while the appliance is in operation. Hot steam can release. There is the ris k of skin burns.
• During pyrolytic cleaning, stubborn dirt can cause discoloration to the enamel . Discolora- tion to the enamel has no effect on the performance of the appliance Risk of fire • Open the door carefully. The use of ingredients with alcohol can cause a mixture of alco- hol and air.
PRODUCT DESCRIPTION General overview 5 3 4 7 2 1 6 1 Control panel 2 Electronic programmer 3 Grill 4 Oven lamp 5 Fan 6 Rating plate 7 Socket for the core temperature sensor Oven accessories • Wire shelf For cookware, cake tins, roasts. • Deep roasting pan To bake and roast or as pan to collect fat.
BEFORE FIRST USE WARNING! Refer to "Safety information" chapter. Initial Cleaning • Remove all parts from the appliance. • Clean the appliance before first use. Refer to chapter "Care and Cleaning". First connection to the mains After first connection to the mains all symbols in the display are on for some seconds.
CONTROL PANEL Electronic programmer 1 2 3 4 5 6 7 8 9 10 Use the sensor fields to operate the appliance. Sensor Field Function Descripti on 1 - DISPLAY Shows the current setti ngs of the appliance. 2 ON/OFF To activate and deactivate the appliance. 3 OPTIONS To set an oven function or programme.
Display 6 1 2 3 5 4 7 1 Oven function symbol 2 Temperature/Time display 3 Clock/Residual heat display (also Minute minder and Time of day) 4 Residual heat indicator 5 Indicators for the clock function.
Residual heat indicator Display shows the residual heat indicator (residual heat symbol) after end of every cooking sessions when the temperature inside oven cavity is more then 40°C. Display also shows the oven temperature. DAILY USE WARNING! Refer to "Safety information" chapter.
Oven function Application 8 Keep Warm To keep the food warm. The set temperature is 80 °C and you cannot change it. 9 Defrost To defrost frozen food. The set temperature is 30 °C and you cannot change it. 10 Bottom Heat To bake cakes with a crispy base, and to preserve food.
Energy saving The appliance has same features that help you save energy during everyday cooking: • Resid ual heat : – the oven function or programme operates: the heating elements are deactivated 10% time earlier (the lamp and fan continue to operate).
3. Use or to s et minut es for DURATIO N. 4. Touch to confirm 5. Use or to set hours for DURATION. After 5 seconds the appli ance starts. If you touch or during setting hours for DURATION, the appliance goes to setting of the END function. 6. When the set time ends, an acoustic signal operates for two minutes.
Setting the MINUTE MINDER Use the MINUTE MINDER to set a countdown (maximum 23 h 59 min). This functi on has no effect on the operation of the oven. You can set the MINUTE MINDER any time, also if the appliance is off. 1. Touch . and "00" flash in the display.
2. Touch or to set the weight programme (refer to "Recipe book"). The display shows: cooking time, duration symbol , a default weight, a unit of measurement (kg, g). 3. Touch or the settings save automatically after five seconds. 4. The appliance starts.
USING THE ACCESSO RIES WARNING! Refer to "Safety information" chapter. The core temperature sensor The core temperature sensor measures the core temperature of the meat. When the meat is at the set temperature, the cooking programme deactivates.
7. When the meat is at the set core temperature, the core temperature and flash. The appliance deactivates. An acoustic signal sounds for two minutes. Touch on/off sensor field to deactivate the acoustic signal. WARNING! Be careful when you remove the core tempe rature sensor.
2. Put the oven shelf on the telescopic runners and carefully push them in the appliance. Make sure you push back the telescopic runners fully in the appliance before you close the oven door. CAUTION! Do not clean the telescopic runners in the dishwasher.
tings (from SET1 to SET8). The number of the s ettings is different for different models. Look into the table below to see the possible value of each setting.
• Day brightness: – when the appliance is on; – if you touch any of the sensor fields during night brightness (apart from ON/OFF), the display goes back to day brightness mode for next 10 seconds; – if the appliance is off and you set the minute minder.
The pyrolytic cleaning procedure cannot start: – If you do not remove the core temperature sensor plug from the socket, the display shows „C2“ – If you do not close the oven door correctly, the display shows „C3“. 2. Remove the worst of the residual dirt manually.
2. Pull the telescopic runners from the rear side of the wall and remove the tele- scopic runners. Installing the telescopic runners Install the telescopic runners in the opposite sequence. The retaining pins on the telescopic shelf runners must point to the front! CAUTION! Do not clean the telescopic runners in the dishwasher.
Removing the glass panels 1 2 3 4 Inserting the glass p anels After the cleaning, install the panels of glass in the opposite sequence. The oven door is not reversible. BP7714000M BP7614000M Make sure you put the glass panels back in the correct order.
First glass panel has a black frame, the second a small dot on a upper right corner and the third one has no marking. Refer to the illustration. When you assemble the panel with the black frame, make sure that the screen - printing (you can feel a roughness) on this panel faces the oven.
Problem Possible cause Solution The oven lamp does not oper- ate The oven lamp is defective Replace the oven lamp. The display shows C2 You want to start the Pyrolytic cleaning, Keep warm or Defrost function but you did not re- move core temperature sensor plug from the socket.
Building In Overall oven dimensions 1 Removable spacers In column building-in Spacers removed min. 550 560-570 580 50 Spacer s not remov ed 550 min 560-570 590 50 Building-in under kitchen counter Spacers removed min. 550 560-570 593 80-100 Spacer s not remov ed 550 min.
Securing the appliance to the cabinet Electrical installation The manufacturer is not responsible if you do not obey the safety precautions from chapter "Safety".
environment and human health, which could otherwise be caused by inappropri ate waste handling of this product. For more detailed information about recycling of this product, please contact your local council, your household waste disposal service or the shop where you purchased the product.
31.
www.aeg.com/shop 397203402 - A - 082011.
Ein wichtiger Punkt beim Kauf des Geräts AEG BP7714000 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie AEG BP7714000 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für AEG BP7714000 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von AEG BP7714000 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über AEG BP7714000 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon AEG BP7714000 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von AEG BP7714000 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit AEG BP7714000. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei AEG BP7714000 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
