Benutzeranleitung / Produktwartung 3104s des Produzenten Carrier Access
Zur Seite of 34
Adit 3104 Q UICK S TART G UIDE Part Number: 002- 0219-0410 Product Release: 1.6 September 2007.
Copyright 2007 Carrier Access Corporation. All rig hts reserved. The information presented in this manual is subject t o change without notice an d does not represent a commitm ent on the part of Carrier Access Corporation. The hardware and softwa re described herein are furnished under a license or non- disclosure agreement.
Q UICK S TART G UIDE Quick Start In this Guide Unpacking and Inspection Installation Environment User Safety Installation - Compliant Installation - Ferrite Beads - Wall Mounting - Rac.
4 Adit 3104 - Relea se 1.6 Quick Start Unpacking and Inspection Unpacking and Inspection W ARNING! O BSERV E PRECAUTIONS FO R HANDLING ELECT ROSTATIC DEVICES . 1. Inspect containers for damag e during shipment . Report any damage to the freight carrier for possible insurance claims.
Adit 3104 - Release 1.6 5 Quick Start User Safety User Safety CAUTION! W HEN USING YOUR TEL EPHONE EQUIPMENT , BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE , ELECTRIC .
6 Adit 3104 - Relea se 1.6 Quick Start Installatio n Compliant Installation NOTE: It is important the DS1/E1 Network Interface Cables are secured separately from the power and Signal Cables. 1. Inspect the unit. 2. Mount the unit, see Wall Mounting on page 7, or Rack Mounting (Optional Feature) on page 8 for detailed instructions.
Adit 3104 - Release 1.6 7 Quick Start Installation Wall Mounting Before beginning the mounting process , verify that the installation area is a stable environment, clean and free from extremes of temperature, shock, vibration and EMI. See Installation Environment on page 4.
8 Adit 3104 - Relea se 1.6 Quick Start Installatio n Rack Mounting (Optional Feature) NOTE: Rack mounting kits are available for both 19 and 23 inch racks. 1 Rack Unit (RU) of spacing is required above the Adit 3000 in the Rack Mo unt Unit. To rack mount the Adit 3000, fo llow the instructions below: 1.
Adit 3104 - Release 1.6 9 Quick Start Installation 3. Place the Adit 3000 on the Tray Slide and a ttach with the 4 screws removed in step 2. 4. Slide the assembled piece (Adit 3000 and Tray Slide) onto th e installed Rack Mounting Tray. 5. Secure the Tray Slide to the Rack Mounting Tray with the att ached screws on the Tray Slide.
10 Adit 3104 - Relea se 1.6 Quick Start Installatio n Adit 3104, 3200 and 3400 Battery Backup Note: This is an Optional Feature. The Adit 3104, 320 0 and 3400 Battery Backup (P/N 73 0-0132), is a wall-moun t battery backup unit to provide up to 8 hours battery backup.
Adit 3104 - Release 1.6 11 Quick Start Chassis Overview Chassis Overview (1) 10/100Ba se-T Ethernet (WAN) (4) 10/100Base- T Ethernet (LAN) Tip & Ring Telco Connector Alarm Status Reset RS-232 Mana.
12 Adit 3104 - Relea se 1.6 Quick Start Interface Connectors Interface Connectors Front of Adit z (1) DS1 WAN port (RJ-48C). Note: E1 will be in a future release.
Adit 3104 - Release 1.6 13 Quick Start Interface Connectors Power The Adit 3000 is powered by a limited -48 VDC Po wer source. The following options are available: z AC/DC Converter z Battery Backup module AC/DC Converter An AC/DC Converter generates 48VDC from any worldwide AC power source.
14 Adit 3104 - Relea se 1.6 Quick Start Interface Connectors 25-Pair Telco Connector Tip and Ring Analog Interfaces equipped with standard 25-pair Telco Connectors (female) for connection to key systems, fa x machines, modems, and PBXs. Circuit connections are made at the 25-pair telco connectors.
Adit 3104 - Release 1.6 15 Quick Start Interface Connectors RS-232 Craft Port (Female DB-9) The RS-232 craft port connector (female) is for co nnection to an external PC or Hayes-compatible modem for local or remote conf iguration, management , and performance monitoring using t he Adit 3000 Command Line Interface (CLI).
16 Adit 3104 - Relea se 1.6 Quick Start Interface Connectors DS1/E1 Connection Ports Each DS1/E1 connec tion port is equipped with a standard RJ-4 8C (female) on the Adit 3000 unit.
Adit 3104 - Release 1.6 17 Quick Start Reset Button 10/100Base-TX Ethernet The 10/100Base-TX Ethernet (female) po rts provide connectivity for Router WAN and/or LAN ports and for manage ment connection via Telnet and/or SNMP to a Network Management System.
18 Adit 3104 - Relea se 1.6 Quick Start Alarm/Status LEDs Alarm/Status LEDs LED State Description Critical Off No critical alarms present Red Critical alarms present. Critical alarms include: user-configured manor envi ronmental inputs. Major Off No major alarms present Red Major alarm present.
Adit 3104 - Release 1.6 19 Quick Start Web-Based Management Web-Based Management The web-based mana gement interface allows you to control various system parameters. The interface is accessed through a web browser. To access the management console: NOTE: The following assumes that you have connected the PC to the LAN port of the Adit 3104.
20 Adit 3104 - Relea se 1.6 Quick Start Setting up a CLI Connecti on Setting up a CLI Connection A CLI connection will require t he LAN or WAN IP ad dress of the unit.
Adit 3104 - Release 1.6 21 Quick Start Log in Log in After successful connection, via telnet or HyperT erm, the user must login. Default Logins are: Login: admin Password: admin123 After successful login the prompt will be displayed as follows: Adit 3104> NOTE: It is recommended that you cha nge your password from the default.
22 Adit 3104 - Relea se 1.6 Quick Start Key Enabled Software Features Key Enabled Software Features The Adit 3104 has additional features that are not pr ovided on the base system. These features can be purchased with the product or added later as needed .
Adit 3104 - Release 1.6 23 Quick Start Basic Configuration Basic Configuration The following configuration is divided into logical sections, where each section configures an additional function. The first must be configured before the second and so forth, ho wever, you may stop at any section and not add the following feat ure.
24 Adit 3104 - Relea se 1.6 Quick Start Basic Configuration Restore Factory Defaults If the unit is not out-of-the-box, you may want to verify t hat the unit is set to defaults. Note: t his will reset the IP address back to th e default setting of 192.
Adit 3104 - Release 1.6 25 Quick Start Basic Configuration Modify Default Admin User For security purposes it is recommended that the Ad ministrator User be change d from the default settings. Modify the Administrator User in the web-browser: z Select Advanced from the Navigation bar z Select Users icon z Select Administrato r, to open the profile.
26 Adit 3104 - Relea se 1.6 Quick Start Basic Configuration z Modify the User info rmation, and select OK to save. It is important t o note that you need to have a minimum of on e user with Administrative Privileges . For users with other access levels, add a New Use r .
Adit 3104 - Release 1.6 27 Quick Start Basic Configuration Configure Ethernet WAN Interface In the web-browser: 1. Select Network Connections from the Navigation bar. 2. It is recommended that you disable/delete the Serial1 port. 3. Select (click) Ethernet 2 (WAN Ethernet) connection to configure.
28 Adit 3104 - Relea se 1.6 Quick Start Basic Configuration 6. Set Internet Protocol to Obtain an IP Address Automatically , from the pulldown menu. This will enable the Adit 3104 as a DHCP Client. Leave the other fields to t heir default settings. 7.
Adit 3104 - Release 1.6 29 Quick Start Basic Configuration Configure Serial1 as WAN In the web-browser: 1. Select Network Connections from the Navigation bar. 2. Select Serial1 . 3. Select Settings button. 4. Set Network to WAN . 5. Select Apply to apply the new settings.
30 Adit 3104 - Relea se 1.6 Quick Start Basic Configuration 6. Select the Enable button..
Adit 3104 - Release 1.6 31 Quick Start Basic Configuration Configure the Adit 3104 as a SIP Line Gateway In the web-browser: 1. Select Voice Over IP from the Navigation bar. 2. Select Use SIP Proxy . 3. Enter Softswitch IP Address, User name and Password.
32 Adit 3104 - Relea se 1.6 Quick Start Basic Configuration 6. Select the Phone Settings tab. 7. Select the Action icon on line #1 to edit..
Adit 3104 - Release 1.6 33 Quick Start Basic Configuration 8. Enter a telephone number in the User ID field and select OK . 9. Repeat this step for each line you would lik e to have register with your Softswitch.
34 Adit 3104 - Relea se 1.6 Quick Start Basic Configuration.
Ein wichtiger Punkt beim Kauf des Geräts Carrier Access 3104s (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Carrier Access 3104s noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Carrier Access 3104s - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Carrier Access 3104s reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Carrier Access 3104s erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Carrier Access 3104s besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Carrier Access 3104s verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Carrier Access 3104s. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Carrier Access 3104s gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
