Benutzeranleitung / Produktwartung MF5950dw des Produzenten Canon
Zur Seite of 83
<< Previous Ne xt >> Installing Y our WiFi capa ble imageCLA SS Pr oduct t o Y our Netw ork for the First Time imageCLASS MF5950dw Mac OS 1.
<< Previous Next >> Inst alling Y our WiFi capable imageCLASS Pr o duct t o Y our Netw ork for the First Time imageCLASS MF5950dw Mac OS Bef ore adding the machine to a wireless LAN 3 Conn.
Bef or e adding the machine to a wir e less LAN << Previous Next >> Check t o mak e sur e that the setup of t he comput er and wir eless LAN or access point are c omplete.
Connection pr ocedur e << Previous Next >> 4 Once y ou have finished checking , connect t he imageCLASS devi ce to t he wir eless LAN. The diagr am below show s the primar y s teps in conne cting y our imageCLASS device to the wireles s LAN.
Swit ching the c onnection Method t o Wir ele ss LAN 5 << Previous Next >> 1. P r ess [ ] (Menu). 2. Select <Networ k Set tings> with [ ] and [ ], and then press [OK].
6 Swit ching the c onnection Method t o Wir ele ss LAN The scr een below is displa ye d f or appr o xima tely 5 seconds . (Y ou do not need to turn the machi ne OFF /ON in this st ep.) << Previous Next >> 3. Sel ect <Select Wir ed/Wir eless LAN> using [ ] or [ ], and then press [OK].
<< Previous Next >> 7 Swit ching the c onnection Method t o Wir ele ss LAN 5. T urn the mac hine OFF /ON when the f ollowi ng screen disappear s. It is nece ssar y to t urn the machine OFF /ON to activat e the settings. T ur n OFF the machine and wai t for at le ast 10 seconds before t urning it back ON.
<< Previous Next >> 8 Selecting a method fo r connecting t o the wir ele ss LAN T wo methods ar e pr ovided for c onnecting to the wire less LAN or acces s point, c onnecting using WPS (Wi - Fi P rotected Setup) function or connec ting manually .
<< Previous Next >> 9 Configuring with WPS F eatur es Is there a W PS button ? No YES Set the machine’ s PIN code using “WPS PIN C ode Mode” tha t is enter ed manual ly fr om the computer to the wireless LAN router or access point. Click Here Connec t us ing “WPS Push But ton Mode.
<< Previous Next >> 10 Configuring with WPS F eatur e s (Push But ton Mode) 1. P r ess [ ] (Menu). 2. Select <Networ k Set tings> with [ ] or [ ] , and then press [OK]. The screen bel ow is displ ayed for appr oximately 5 s econds. (Y ou do not need to t urn the machine OFF /ON in this step.
Configuring with WPS F eatur e s (Push But ton Mode) << Previous Next >> 11 4. Pr ess [OK]. 5. Select <WPS Push Butt on Mode> using [ ] or [ ], and press [OK].
Configuring with WPS F eatur e s (Push But ton Mode) 12 << Previous Next >> 7. Wi thin 2 minutes, pr ess and hold the WPS butt on on the wirel ess LAN r out er or access poi nt. *The amoun t of time yo u must hol d down the WPS but ton will depend on the wir eless LAN r outer or acces s point y o u are using.
Configuring with WPS F eatur e s (Push But ton Mode) 13 << Previous Next >> 8. Mak e sure the WiFi ind icator blinks. When the wir eless LAN rout er or access point is detect ed, the Wi - Fi indicat or blinks. The scr een be low is displa yed for appr o xima tely 2 sec onds, and then the Wi - Fi indic ator w ill remain solidly lit .
Configuring with WPS F eatur e s (Push But ton Mode) 14 << Previous Next >> 9. W ait until the machine sets the IP addr ess automatic ally (appr o x. 2 min). The imag eCLASS devic e sets the IP address aut oma tica lly and c onnects to the netw ork.
Configuring with WPS F eatur e s (Pin Code Mode) 15 << Previous Next >> Ent er the PIN c ode gener ated by the imag eCLASS device to wir eless LAN r outer s and/ or acc ess points f or c onnection. 1. P r ess [ ] (Menu). 2. Select <Networ k Set tings> using [ ] or [ ], and then pr ess [OK].
16 Configuring with WPS F eatur e s (Pin Code Mode) 4. Pr ess [OK]. 5. Select <WPS PIN Code Mode> using [ ] or [ ] and press [O K]. 6. Sel ect <Y es> using [ ] and press [OK].
17 Configuring with WPS F eatur e s (Pin Code Mode) 7. Within 10 minut es, use your comput er to en ter the PIN code displ a y ed on the scr een into t he wir eless LAN ro ut er or access poin t. *For PIN code entry methods, s ee the instr uction manual pr ovided with the wir eless LAN rout er or acce ss point you a re using .
18 Configuring with WPS F eatur e s (Pin Code Mode) << Previous Next >> 8. Mak e sure the WiFi ind icator blinks. When the wir eless LAN rout er or access point is detect ed, the Wi - Fi indicat or blinks. The scr een be low is displa yed for appr o xima tely 2 sec onds, and then the Wi - Fi indic ator w ill remain solidly lit .
19 Configuring with WPS F eatur e s (Pin Code Mode) << Previous Next >> 9. W ait until the machine sets the IP addr ess automatic ally (appr o x. 2 min). The mac hine sets the IP address aut oma tica lly and c onnects to the netw ork. If y ou wan t to set the IP addres s manuall y , see the follow ing.
20 Config uring Manually If your wir eless LA N rout ers and /or access points do not support WPS, enter the wireless LA N router and/ or acces s poi nt informatio n to the ma chine for c onnectio n.
21 Config uring Manually << Previous Next >> Pr eparing The following inf o rmation is required. Check your wi rele ss LAN r outer s and/or acce ss points, a nd mak e a note of the inf orma tion labele d on the bottom.
22 Configuring Manually (R equir ed Inf ormation) Access P oint Name/Netw ork Name * It may be lab eled as “SSID. ” It is the distinguished name for specifying a particular ac cess point.
23 Configuring Manually (Using the Wireless Setup Assis tan t) Using the Canon MF /LB P Wir eless Setup Assis tant Y ou ca n check the inf ormation for the wir eless LAN rout er or acces s point (suc h as SSID or Ne twor k Ke y) by us ing the Canon Wi reles s Se tup Ass ist ant.
24 Configuring Manually (Using the Wireless Setup Assis tan t) 2. R ead the License Agr eement and click [Y es] t o agr ee if ther e is no pr oblem. << Previous Next >>.
25 Configuring Manually (Using the Wireless Setup Assis tan t) 3. The f ollowing dialog bo x wi ll be displa yed on the scr een. R ead thr ough the scr ee n and click [OK].
26 Configuring Manually (Using the Wireless Setup Assis tan t) 4. The i nf ormati on f or the wir eless LAN r out er or acc ess point is displa yed W rite down the inf orma tion and then clic k [Quit]. If multiple access points are displa yed R ead the ins truction manuals supplied with the mac hine, and selec t the appr opria te access point.
27 Config uring Manually (Selecting Access P oin ts) Fr om the lis t of acces s points sear ched by the imageCLASS device, select a wireless LAN router or an access po int to be c onnect ed and enter a netw ork k ey for conne ction. Selecting Access Point For selec ting access po ints, WEP 802.
28 Config uring Manually (Selecting Access P oin ts) 3. Select <Wir eless LAN Set tings> using [ ] or [ ] and pr ess [OK]. 4. Pr ess [OK]. 5. Select <SSID Set tings> using [ ] or [ ] and press [OK].
29 Config uring Manually (Selecting Access P oin ts) 6. Sel ect <Select Access P oint> usi ng [ ] or [ ] and press [O K]. << Previous Next >>.
30 Config uring Manually (Selecting Access P oin ts) 7. Select the ma t ched SSID t hat y ou have writ t en down earlier using [ ] or [ ], and t hen press [OK]. If m ultiple matched S SID ar e displa yed, select the one tha t is displa yed at the top (a s tr onger sig nal).
31 Config uring Manually (Selecting Access P oin ts) 8. En t er the networ k entry f ormat tha t mat ches the number of netw ork k ey char acter s (digits) that y ou have writ ten dow n earlier using [ ] or [ ], and then press [OK]. Either of the fo llowing scr eens is displa yed.
32 Config uring Manually (Selecting Access P oin ts) 9. En t er the networ k k ey tha t y ou hav e writ ten down. ASCII te xt 1. Press [ ] ( T on e), and t he select <Entry Mode>. 2. Ent er the ne twork k ey . Enter it using the numeric k eys . 3.
33 Config uring Manually (Selecting Access P oin ts) 10. Selec t <Y es> using [ ] and press [OK]. << Previous Next >>.
34 Config uring Manually (Selecting Access P oin ts) 11. Mak e sure the Wi- Fi indicator blinks. When the wir eless LAN rout er or access point is detect ed, the Wi - Fi indicat or blinks. The scr een be low is displa yed for appr o xima tely 2 sec onds, and then the Wi - Fi indic ator w ill remain solidly lit .
35 Config uring Manually (Selecting Access P oin ts) 12. W ait until the machine sets the IP addr ess automatic ally (appr o x. 2 min). The mac hine sets the IP address aut oma tica lly and c onnects to the netw ork. If y ou wan t to set the IP addres s manuall y , see the follow ing.
36 Config uring Manu ally (Manually Ent ering SSID) 1. P r ess [ ] (Menu). 2. Select <Networ k Set tings> using [ ] or [ ], an d then press [O K].
37 Config uring Manu ally (Manually Ent ering SSID) 5. Select <SSID Set tings> using [ ] or [ ], and then press [OK ]. 6. Select <Manual Sett ings> using [ ] or [ ], and then pr ess [OK]. 7. En t er the SSID that y ou hav e wri t t en down.
38 Config uring Manu ally (Manually Ent ering SSID) 8. Select encryption types that y ou h av e wr it t en down using [ ] or [ ], and then pr ess [OK]. 9. Select the authentic atio n method or encrypti on type that y ou have writ ten down using [ ] or [ ], and then press [OK ].
3. S elect the WEP k ey using [ ] or [ ] , and then pr ess [OK]. * Selec t the k ey number to be used fo r enc ryption which y ou wr ote down ear lier . 39 Config uring Manu ally (Manually Ent ering SSID) When the type of encryption is WP A/WP A2 - PSK • Auto (AES - CC MP or TKIP) • AES - CCMP 2.
40 Config uring Manu ally (Manually Ent ering SSID) 10. Selec t the entry f ormat that mat ches the numb er of netwo rk k ey char acter s (digits) that y ou have writ ten dow n, us ing [ ] or [ ]then pr ess [OK]. Either of the fo llowing scr eens is displa yed.
41 Config uring Manu ally (Manually Ent ering SSID) 11. En t er the netwo rk k ey tha t y ou hav e writ ten down earlier ASCII te xt 1. P ress [ ]( T one), and then s elect <En try Mode>. 2. Ent er the netw ork k ey , using the numeric k ey s. 3.
42 Config uring Manu ally (Manually Ent ering SSID) Hex ad ecim al 1. Ent er the netw ork k ey . *Selec t the c har act er s using [ ] or [ ], and then press [O K] to ent er . 2. S elect <A pply> using [ ] or [ ], and then pr ess [OK]. 12. Selec t <Y es> using [ ], and then press [OK].
43 Config uring Manu ally (Manually Ent ering SSID) 13. Mak e sure the Wi- Fi indicator blinks. When the wir eless LAN rout er or access point is detect ed, the Wi - Fi indicat or blinks. The scr een be low is displa yed for appr o xima tely 2 sec onds, and then the Wi - Fi indic ator w ill remain solidly lit .
44 Config uring Manu ally (Manually Ent ering SSID) 14. W ait until the machine sets the IP addr ess automatic ally (appr o x. 2 min). The mac hine sets the IP address aut oma tica lly and c onnects to the netw ork. If y ou wan t to set the IP addres s manuall y , see the follow ing.
45 Checking I P Addr ess Set tings 1. Pr ess [ ] (Status Monitor/C ance l). Foll ow the st eps below to c onfirm the IP addres s s et on the imag eCLASS devi ce. W rite dow n the IP addre ss a s you ma y need it when inst alling the softw are. Checking IPv4 add r ess settings 2.
46 Checking I P Addr ess Set tings 4. Select <IP Address> using [ ] or [ ], and then pr ess [OK]. 5. W rit e down the IP addr ess. 6. P r ess [ ] (St atus Monit or/Cancel ) to close the scr een. *If y ou are us ing IPv6, please s ee the e - Manual for instr uctio ns on checki ng the IP address .
47 Pr e paring to the ins tall the softw are Bef ore inst alling the softwar e driver s will ne ed to be downloaded f or the componen ts you w ish t o inst all. Driver s are a vailable here . Selec t your OS , then download the c omponen ts y ou wish to install .
48 Ins talling the Print er Driver Bef o re using the printer you must install the UFR II printer driver f or it. Imp or tant If an old er ver sion of t he printer driver has been installed, uninstall the older ver sion before installing the new ve rs i o n .
49 Ins talling the Print er Driver 2. Double- click the [UF R II Inst aller .mpkg ] i con . Clic k [Continue] whe n the co nfirma tion mes sag e appear s.
50 Ins talling the Print er Driver 3. R ead the softw are lic ense agreemen t c ar efully then clic k [Continue]. 4. If y ou agree t o the terms o f the softw ar e license agreemen t, cl ick [Agree].
51 Ins talling the Print er Driver 5. Click [ Install]. << Previous Next >>.
52 Ins talling the Print er Driver 6. En t er the administ r ator s name and passwor d then click [OK]. Installa tion starts. Note : Depending on the s ys tem envi r onment, the [Authent ica te] dialog bo x ma y not be dis pla y ed.
53 Ins talling the Print er Driver 7. Click [Cl ose] when the c onfirma tion message be low appear s. Installa tion is complet e Be for e using the prin ter driv er , y ou mus t add the print er in [Sy st em Pr ef erences] . Click here to regist er the printer in Sys tem Pre fer ences.
54 Ins talling the F ax Driver 1. Double- click th e F ax Driver . dmg to di spla y it ’ s con t ents. Bef o re using the fa x, you must inst all the fa x driver for it. Impo rtant: • If a older ver sion of t he fax driver has been installed, uninstall the older ver sion before installing the new ve rs i o n .
55 Ins talling the F ax Driver 2. Double- click th e [C anon F ax Inst aller .mpkg ]. Clic k [Con tinue] when the dial og bo x below a ppear s. The [Auth entic ate] d ialog is display ed.
56 Ins talling the F ax Driver 3. R ead the softw are lic ense agreemen t c ar efully then clic k [Continue]. << Previous Next >>.
57 Ins talling the F ax Driver 4. Click [Agree]. The Installer s tarts. 5. Click [ Install]. << Previous Next >>.
58 Ins talling the F ax Driver 6. En t er the administ r ator s name and passwor d then click [OK]. Installa tion starts. Note : Depending on the s ys tem envi r onment, the Authentic ate dialog bo x may not be displa yed. In that c ase, pr oceed t o nex t st ep.
59 Ins talling the F ax Driver 7. Click [Cl ose] when the c onfirma tion message be low appear s. Installa tion is complet e. Be for e using the F ax Driv er , yo u must a dd the f ax in [S ys tem Pre f erenc es]. Click here to regist er the printer in Sys tem Pre fer ences.
60 Ins talling the Scanner Driver 1. Double- click th e Scan ner Dri ver . dmg to di spla y it ’ s con t ents. Note : Bef o re inst alling. • Perf orm t he following procedures. - Exit running applic ati ons. - R emov e the U SB c able that connects the c omputer and the s canne r .
61 Ins talling the Scanner Driver 2. Double- click th e [C anon Scangear M F .mpkg ] ([Canon Scangear MF)] icon. 3. Click [Continue]. << Previous Next >>.
62 Ins talling the Scanner Driver 4. R ead the softw are lic ense agreemen t c ar efully then clic k [Continue]. << Previous Next >>.
63 Ins talling the Scanner Driver 5. If y ou agree t o the terms o f the softw ar e agreemen t then clic k [Agree] . 6. When the f ollowing scr een appear s click [Con tinue].
64 Ins talling the Scanner Driver 7. Click [Ins tall] o r [Upgr ade]. 8. When the f ollowing screen appear s, enter the adminis tr at or ’ s name and passwor d then click [OK].
65 Ins talling the Scanner Driver 9. Click [Close]. Installa tion is complet e. Be for e using the Sc anner Driv er , you mus t reg ist er the sc anner y ou are using to the MF T oolbox .
66 Adding the Print er in the Sy s tem Pre f e r ences 1. Open [Syst e m Pre f e rences] t hen click [Print & F ax] or [Print & Scan ]. The [Print & F ax] or [Prin t & Scan] dialog box is display ed.
67 Adding the Print er in the Sy s tem Pre f e r ences 2. Click the [ +] icon. If you are using Mac OS X 10.4.x, click [Print] in t he [Print & fax ] dialog box to display the [Printing] p ane then click the [+] icon.
68 Adding the Print er in the Sy s tem Pre f e r ences 3. Sele ct [I P] or [I P Print er] the n s elect [Line Printer Daem on – LPD] from [Pr otoc ol].
69 Adding the Print er in the Sy s tem Pre f e r ences 4. En t er the IP addr ess of the print er you ar e going t o use in [Address], then select [ Select a dri ver t o use] from [P rin t Using] . If y ou are using Mac OS X 10.4.x en ter the IP address o f the prin ter you a re g oing to use, then select [Canon] fr om [Prin t Using].
70 Adding the Print er in the Sy s tem Pre f e r ences 5. Select the print er driver c orr esponding to the print er you are g oing to use fr om the lis t. If y ou are using Max OS X 1 0.6 or later , select the printer driver corr esponding to the printer model you ar e going to use in the [Printer Software] dialog box.
71 Adding the Print er in the Sy s tem Pre f e r ences 6. Click [Add]. The opti on s et tings dia log bo x is displa yed. Confi rm or set the options t o be used with the print er , the n click [Continue] . 7. Confirm tha t t he print er has been added in the [Prin t & F ax] or [Pri nt & Scan] dialog bo x, then close the dialog bo x.
72 Adding the F ax in the Sy s tem P r ef erences 1. Open [Syst e m Pre f e rences] t hen click [Print & F ax] or [Print & Scan ]. The [Print & F ax] or [Prin t & Scan] dialog box is display ed.
73 Adding the F ax in the Sy s tem P r ef erences 2. Click the [ +] icon. If you are using Mac OS X 10.4.x, click [Print] in t he [Print & fax ] dialog box to display the [Printing] p ane then click the [+] icon.
74 Adding the F ax in the Sy s tem P r ef erences 3. Sele ct [I P] or [I P Print er] the n s elect [Line Printer Daem on – L PD] or[HP J etd ire ct – So ck et] from [Pr otocol].
75 Adding the F ax in the Sy s tem P r ef erences 4. En t er the IP addr ess of the f ax y ou are going t o use in [Address], then select [ Select a dri ver t o use] from [P rin t Using] . If y ou are using Mac OS X 10.4.x en ter the IP address o f the f ax you ar e going t o use, then selec t [Canon] fr om [Print Using] .
76 Adding the F ax in the Sy s tem P r ef erences 5. Select the fa x driver cor r esponding to the prin ter you ar e going to use from the list. If y ou are using Ma x OS X 10.6 or late r , select the f ax driver corr esponding to the print er model you a re g oing to use in the [Printer Soft war e] dialog box.
77 Adding the F ax in the Sy s tem P r ef erences 6. Click [Add]. The opti on s et tings dia log bo x is displa yed. Confi rm or set the options t o be used with the f ax, then click [Continue] .
78 Adding the F ax in the Sy s tem P r ef erences 8. Confirm tha t t he f ax h as been added in the [Pr int & F ax] or [P rint & Sc an] dialog bo x, then close the dialog bo x.
79 R egist ering the Scanner t o the MF T oolbo x 1. Double- click th e icon of [MF T oolb ox] ins talled i n the f ollowing folder . T o scan docume nts v ia netw ork connec tion, y ou nee d to r egis ter the s canne r to the MF T oolbox. The har d disk you ar e using >[Applica tions]> [Cano n MF Util ities].
80 R egist ering the Scanner t o the MF T oolbo x 3. Cl ick [+] (or [Add]). << Previous Next >>.
81 R egist ering the Scanner t o the MF T oolbo x 4. R egist er the scanner . For B onjour c onnection. 1. Clic k [Bonjour]. 2 . Clic k the scanne r name you w ant to use. 3. Click [Add]. For T CP /IP connection. 1. Clic k [IP]. 2 . Ent er the IP addre ss o r hostname of the sca nner y ou wa nt to us e 3.
82 R egist ering the Scanner t o the MF T oolbo x 5. Close the [Ne twork Sc anner] dialog bo x. Important Up to te n compute rs c an be connecte d to the product a t a time for sc anning via a netw ork. Y ou cannot sc an and send to an eleve nth and s ubsequen t c omputer s.
83 Congr atula tions! Y ou have successfully added your Canon imageCLASS device to your wir eless netw ork. << Previous End.
Ein wichtiger Punkt beim Kauf des Geräts Canon MF5950dw (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Canon MF5950dw noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Canon MF5950dw - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Canon MF5950dw reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Canon MF5950dw erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Canon MF5950dw besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Canon MF5950dw verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Canon MF5950dw. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Canon MF5950dw gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
