Benutzeranleitung / Produktwartung FDP75C12N des Produzenten Canon
Zur Seite of 24
- 1 - Before attempting to connect or operate this product, please read these instructions completely. Product Instructions IP Ready ™ Series FDW75C12N & FDP75C12N 81-IN5329 04/28/06.
! Caution Risk of ElECtRiC shoCk! Caution: to REDuCE thE Risk of ElECtRiCal shoCk, Do not EXPosE C oMPonEnts to WatER oR MoistuRE. safEtY PRECautions iMPoRtant safEGuaRDs 1. Read Instructions - All the saf ety and operating instructions should be r ead befor e the unit is operated.
- 3 - ! ! ELECTRICAL SPECIFICATIONS (OUTDOOR ONLY): Power 12Vdc, Class 2 Only T otal Power: 21 watts Housing only Accessories (Heater/Blower): 21 watts Heater: 20 watts Blower: 1 watt NOTE: This unit is designed for operation in an upright position.
- 4 - INSTALLATION OF PTZ CAMERA See model for specic instruction. Listed on the following pages are the specic instructions for each of the individual network cameras.
- 5 - INSTALLING QUICK RELEASE BRACKETS AXIS 213 2539 Mounting Plate: 1. Install the camera to the 2539 mounting plate using (2) 10-32 screws and lockwashers provided. 2. The Axis 213 camera requires 3.5" of spacing for optimal position within the housing.
- 6 - INSTALLING QUICK RELEASE BRACKETS AXIS 214 2685 Mounting Plate: Attach camera using these (3) holes 1. Install the AXIS 214 camera to the 2685 mounting plate using the (3) 3mm x 12mm bolt and lock washers provided. 2. The AXIS 214 camera requires 2” of spacing for optimal position within the housing.
- 7 - INSTALLING QUICK RELEASE BRACKETS CANON VB-C10R 2539 Mounting Plate: 1. Install the camera to the 2539 mounting plate using (2) 10-32 screws and lockwashers provided. 2. The Canon VB-C10R camera requires 4" of spacing for optimal position within the housing.
- 8 - INSTALLING QUICK RELEASE BRACKETS CANON VB-C50iR 2539 Mounting Plate: 1. Install the camera to the 2539 mounting plate using (2) 10-32 screws and lockwashers provided. 2. The Canon VB-C50iR camera requires 3.5" of spacing for optimal position within the housing.
- 9 - INSTALLING QUICK RELEASE BRACKETS CANON VC-C4R / VC-C50iR 2539 Mounting Plate: 1. Install the camera to the 2539 mounting plate using (2) 10-32 screws and lockwashers provided. 2. The Canon VC-C4R / VC-C50iR camera requires 4" of spacing for optimal position within the housing.
- 10 - INSTALLING QUICK RELEASE BRACKETS ELMO PTC-200C Mounting plate for this unit is included in the housing packet. Remove existing mounting plate installed in the unit before proceeding. 2539 Mounting Plate: 1. Place the camera onto the quick release bracket using the (4) metric 3M Phillips head screws provided with the kit.
- 11 - INSTALLING QUICK RELEASE BRACKETS ELMO PTC-201 Mounting plate for this unit is included in the housing packet. Remove existing mounting plate installed in the unit before proceeding. 2539 Mounting Plate: 1. Place the camera onto the quick release bracket using the (4) metric 3M Phillips head screws provided with the kit.
- 12 - INSTALLING QUICK RELEASE BRACKETS ELMO PTC-400C Mounting plate for this unit is included in the housing packet. Remove existing mounting plate installed in the unit before proceeding. 2539 Mounting Plate: 1. Place the camera onto the quick release bracket using the (4) metric 3M Phillips head screws provided with the kit.
- 13 - INSTALLING QUICK RELEASE BRACKETS ELMO PTC-401 Mounting plate for this unit is included in the housing packet. Remove existing mounting plate installed in the unit before proceeding.
- 14 - INSTALLING QUICK RELEASE BRACKETS JVC VN-C30U 2539 Mounting Plate: 1. Remove the mounting plate from the camera and place it onto the quick release bracket using the (3) metric 3M Phillips head screws provided with the kit. Then place the mounting plate back onto the JVC VN-C30U.
- 15 - ½" 1" 2" INSTALLING QUICK RELEASE BRACKETS P ANASONIC BB-HCM381 / KX-HMC280 2539 Mounting Plate: Attach camera using this hole 1. Install the camera to the 2539 mounting plate using the ¼ x 20, washer and lockwasher provided. 2.
- 16 - ½" INSTALLING QUICK RELEASE BRACKETS PIXORD 261 / 262 2630 Mounting Plate: 1. Install the camera to the 2630 mounting plate using the (3) 8 x 32 x .5 at head screws, nuts and washers provided. 2. The PIXORD 261/262 cameras require ½“ of spacing to properly position the camera within the housing.
- 17 - INSTALLING QUICK RELEASE BRACKETS SONY SNCRZ30 2539 Mounting Plate: 1. Attach the camera to the 2539 mounting plate using the (1) ¼ x 20 bolt, washer and lockwasher provided. 2. The SNCRZ30 require 2” of spacing to properly position the camera within the housing.
- 18 - INSTALLING QUICK RELEASE BRACKETS SONY SNCRZ50 2539 Mounting Plate: 1. Attach the SNCRZ50 camera to 2539 mounting plate using 3mm x 8mm bolt lockwashers provided. 2. The SONY SNCRZ50 require 2 ½ ” of spacing to properly position the camera within the housing.
- 19 - INSTALLING QUICK RELEASE BRACKETS TOSHIBA IK-WB21A 2539 Mounting Plate: 1. Remove the quick release bracket from the camera. Using (4) 8 x 32 x 3/8 bolts and star washers attach the quick release place to the 2539 mounting plate. 2. The T oshiba 1K-WB21A requires 3” of spacing to properly position the camera within the housing.
- 20 - WIRING INSTRUCTIONS Wiring Color Code Power and Control Inputs RJ45 BNC (Large) Power (Small) Alarms AFTER CAMERA INSTALLATION Make inside housing wiring connections following Chart B below.
- 21 - 3. Mount the housing assembly to the mounting bracket and housing coupling. A safety cable is included with the housing to temporarily hold it while making wiring connections. Loop the safety cable over one of the set screws on the housing coupling and make the appropriate connections using the (2) screw-down connectors supplied.
- 22 - Exploded View for Replacement Parts 1 11 6 9 10 1 1 1 2 3 5 4 7 8 14 16 6 12 13 18 (1) (1) (3) (2) (2) (2) (8) (4) (2) (1) (1) (4) (4) (1) (3) (4) (3) (3) (1) (1) (4) (4) (1) (1) (4) (4) 19 17 .
- 23 - Part Number Description 1 RPFD7501 LOWER TRIM RING 2 FD7T TINTED REPLACEMENT CAPSULE FD7C CLEAR REPLACEMENT CAPSULE 3 RPFD703 DOME CLAMPING BRACKET 4 RPFD072 24 VAC HEATER 5 RPFD080 (12 VDC) BL.
- 24 - 2.000 3.250 R .733 2.132 2.981 1.537 5.500 Mounting Template.
Ein wichtiger Punkt beim Kauf des Geräts Canon FDP75C12N (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Canon FDP75C12N noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Canon FDP75C12N - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Canon FDP75C12N reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Canon FDP75C12N erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Canon FDP75C12N besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Canon FDP75C12N verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Canon FDP75C12N. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Canon FDP75C12N gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
