Benutzeranleitung / Produktwartung C3480 des Produzenten Canon
Zur Seite of 312
Please read this guide before operating this product. After you finish reading this guide, store it in a safe place for future reference. ENG PS/PCL/UFR II Printer Guide PS/PCL/UFR II Printer Guide.
.
Color imageRUNNER C3480/C3480i/C3380/ C3380i/C3080/C3080i/ C2880/C2880i/C2550 PS/PCL/UFR II Printer Guide 0 Ot¯.
The manuals for this machine are d ivided as follows. Please refer to them for de tailed information. The manuals supplied with optional equipment are incl uded in the list below. Depending on the system configuration and product purchas ed, some manuals may not be needed.
• PCL Printer Drive r Installation an d Instruction s PCL Driver Guide CD-ROM • PS Printer Driver Installation and Instruction s PS Driver Guide CD-ROM • UFR II Printer Driver Installation and I.
Chapter 1 Before Y ou Start Using This Machine Chapter 2 Handling Different P rint Jobs Chapter 3 Printer Setti ngs Menu Chapter 4 Report Settings Menu Chapter 5 How to Use th e Direct Print Function Chapter 6 T roubleshooting Chapter 7 Appendix Includes the available font lists, confi guration page samples, specifications, and index.
v Contents Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii How to Use Thi s Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii Symbols Used in This Manual .
vi Handling Jobs from the System Monitor Scre en . . . . . . . . . . . . . . . . . . .2-15 Canceling All Operations (Reset Pri nter) . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-17 Temporarily Stopping Print Jobs . . . . . . . . . . . . . .
vii Job Securing Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-26 Timeout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-27 Print After Completing RIP .
viii Point Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-54 Pitch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-54 Form Lines .
ix Image Orientation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-78 Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-79 Print Position .
x Configuration Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3 Font List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-3 PS Menu . . . .
xi Character Width (Fixed and PS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-5 Orientation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-5 Symbol Set . . . . . . . . . . . . .
xii PC-852 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-39 PC-T urkish . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-39 Pi Font. . . . . . . .
xiii Thank you for purchasing this Canon pr oduct. Please read this ma nual thoroughly before operating the machine in order to familiariz e yourself with it s capabilities, and to make the most of its many functions. Af ter reading this manual, store it in a sa fe place for futur e reference.
xiv • Buttons on Compu ter Operation Screens: [Button Name] Displays Used in This Manual Screen shots of the computer displays and the touch panel display used in this manual may differ from the ones you actu ally see, dependin g on the options that come with your machine.
xv License Notice UFST: Copyright © 1989 - 200 3 Monotype Imaging, Inc. T rademarks MEAP and the MEAP logo are trademarks of Canon Inc. Apple, Macintosh, and Truety pe are tr ademarks of Apple Inc.
xvi Other product and company nam es herein may be the trademarks of their respecti ve owner s. Copyright Copyright 2007 by Canon In c. All rights reserved .
1-1 CHAPTER 1 Before Y ou Start Using This Machine This chapter describes how to set up the prin ting environ ment from the touch panel display. Printing Flow with This Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Printing Flow with This Machine 1-2 1 Before You Start Using Th is Machine Printing Flow with This Machine Printing with a Printer Driver Normally, the series of operations involved in printing data from a compu ter is specified by control commands gene rated us ing a printe r driver.
Printing Flow with This Machine 1-3 1 Before You Start Using Th is Machine This machine supports the following th ree kinds of control commands: ■ UFR II Mode UFR (Ultra Fast Rendering) is printing technol ogy developed by Canon.
Printing Flow with This Machine 1-4 1 Before You Start Using Th is Machine IMPORTANT • For information on how to operate Direct Print from a Remote UI, see Chapter 5, "How to Use the Direct Print Function." • There are some print settings that can not be specified from a Rem ote UI.
Operations and Terms Used in This Manual 1-5 1 Before You Start Using Th is Machine Operations and T erms Used in This Manual Combinations and Names of Printer Kit Options Combinations with options (system config urations) for using th e machine as a printer are availa ble as described belo w.
Operations and Terms Used in This Manual 1-6 1 Before You Start Using Th is Machine Differences in Operation with UFR II, PCL, and PS Printers This describes differences in the settings that can be specified as a minimum from the touch panel display in each printer type.
Operations and Terms Used in This Manual 1-7 1 Before You Start Using Th is Machine PS Printer Driver (PostScript Emulation Mode) PCL Printer Driver (PCL Mode) UFR II Printer Driver (UFR II Mode) Remo.
Personality 1-8 1 Before You Start Using Th is Machine Personality The machin e can distinguis h between comp uter-sent co ntrol comma nds and Direct Print data and automati cally switch person alities.
Menu Functions 1-9 1 Before You Start Using Th is Machine Menu Functions This section describes the menu functions and how to acce ss them with the touch panel display.
Menu Functions 1-10 1 Before You Start Using Th is Machine Settings Priorities When the same menu function setting can be specified by using t he keys on the machine or by specifying the setting in an application or the printer drive r, the setting from the application or printer driver has priority .
Menu Functions 1-11 1 Before You Start Using Th is Machine Menus for Printer Settings Printer Settings are configure d with the menus below. ■ Printer Settings Enables you to specify or change settings for printing from the machine. The following menus are included within th e Printer Settings menu.
Accessing the Printer Settings Menu 1-12 1 Before You Start Using Th is Machine Accessing the Printer Settings Menu The Printer Settin gs menu enables yo u to access common features. Below is an abbreviated outline of the Prin ter Se ttings menu st ructure.
Accessing the Printer Settings Menu 1-13 1 Before You Start Using Th is Machine 1 Press (Additional Functions). 2 Press [Printer Settings]. 3 Press [Settings].
Accessing the Printer Settings Menu 1-14 1 Before You Start Using Th is Machine 4 Press [Copies]. 5 Press [-] or [+] to enter the number of copies. Y ou can also use - (numeric keys) to enter the value, and (Clear) to clear your entry . Y ou can change the va lue by pressing [-] or [+], ev en if you have entered the value using - (numeric keys).
Accessing the Printer Settings Menu 1-15 1 Before You Start Using Th is Machine 6 Confirm the setting ➞ press [OK]..
Accessing the Report Settings Menu 1-16 1 Before You Start Using Th is Machine Accessing the Report Settings Menu The Report Settings me nu enables you to access report p rint features, such a s checking the configuration. Below is an ab breviated outline of the Report Settings menu structure.
Accessing the Report Settings Menu 1-17 1 Before You Start Using Th is Machine 1 Press (Additional Functions). 2 Press [Report Settings]. 3 Press [Printer] under <Print List>.
Accessing the Report Settings Menu 1-18 1 Before You Start Using Th is Machine 4 Press [PCL]. 5 Press [Configuration Page]. 6 Press [Yes] to print the page.
Accessing the Report Settings Menu 1-19 1 Before You Start Using Th is Machine If the printer function is working correctl y , the Configuration Page will be similar to the sample below .
Accessing the Report Settings Menu 1-20 1 Before You Start Using Th is Machine.
2-1 CHAPTER 2 Handling Different Print Jobs This chapter describes how to check an d chang e print jobs fro m the touch panel display. Procedure for Checking and Changing Jobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 Checking Jobs from the Print Ba sic Features Screen .
Procedure for Checking and Changing Jobs 2-2 2 Handling Different Print Jobs Procedure for Checking and Changing Jobs You can check or change the status of print jobs from the touch panel display.
Procedure for Checking and Changing Jobs 2-3 2 Handling Different Print Jobs When "Display Status Before Authentication" is set to [Off] ✓ : Displayed : Not Dis played * Even if you set the Display Status Before Authenticati o n mode to [Off], access to the System Monitor sc reen is only restricted if a login service is set.
Procedure for Checking and Changing Jobs 2-4 2 Handling Different Print Jobs NOTE • You can set the Print Basic Features screen to be the initial screen, when the main power is turned ON or after an Auto Clear, with "Initial Function and Function Order Settings" in Common Settings (from the Additional Functions screen).
Procedure for Checking and Changing Jobs 2-5 2 Handling Different Print Jobs ● If you press [Status] : ❑ You can check all the jobs currently being processed or waiting to be processed. ● If you press [Log]: ❑ You can check the jobs that have already been processed.
Procedure for Checking and Changing Jobs 2-6 2 Handling Different Print Jobs NOTE • Secured print jobs (including encrypted secured jobs) other than for a logged-in user are displayed as asterisks (*) and ca nnot be handled unless you are using a login service.
Procedure for Checking and Changing Jobs 2-7 2 Handling Different Print Jobs • If you press [Select All], you can select a ll the jobs. If you press [Clear Selection], any selected jobs are cleared. • For instructions on canceling jobs or printing secured print job s, see "Checking and Changing Print Jobs," on p.
Procedure for Checking and Changing Jobs 2-8 2 Handling Different Print Jobs Checking Jobs from th e System Monitor Screen If you press [Status] in the System Moni to r screen, you can check print job status. If you press [Log], you can check the jobs that h ave already been pro cessed.
Procedure for Checking and Changing Jobs 2-9 2 Handling Different Print Jobs 2 Press [Print] or [Device] to display the current machine status. ● If you press [Print]: ❑ Press [Status] to check the jobs curr ently being processed or waiting to be processed.
Procedure for Checking and Changing Jobs 2-10 2 Handling Different Print Jobs ● If you press [Device] : ❑ Check the current machine status. 3 Press [Done]. The screen returns to the Basic Features screen. NOTE For instructions on [Print], see "Checking and Changing Print Jobs," on p.
Checking and Changing Print Jobs 2-11 2 Handling Different Print Jobs Checking and Changing Print Jobs This section describes the proced ures for the job processes listed below. • Canceling Print Jo bs (See p. 2-12 .) • Canceling All O perations (Res et Printer) ( See p.
Checking and Changing Print Jobs 2-12 2 Handling Different Print Jobs NOTE The table below describes the icons that are displayed on the status and log screens. Canceling Print Jobs You can perform [Cancel] when you want to cancel a print job at the time da ta is currently being received or executed.
Checking and Changing Print Jobs 2-13 2 Handling Different Print Jobs 1 Press [ ➞ ] ➞ [Print Job]. NOTE • You can set the Print Basic Features scre en to be the initial screen, when the main pow.
Checking and Changing Print Jobs 2-14 2 Handling Different Print Jobs NOTE • To cancel multiple jobs, select jobs displayed in the list in the order to be canceled ➞ press [Cancel].
Checking and Changing Print Jobs 2-15 2 Handling Different Print Jobs 4 Press [Yes]. If you do not want to cancel, press [No]. NOTE • You cannot cancel other users' jobs. Ho wever, if you are logged in as an Administrator, you can cancel the other users' jobs.
Checking and Changing Print Jobs 2-16 2 Handling Different Print Jobs 3 Select the job to be canceled ➞ press [Cancel]. NOTE You cannot select and cancel multiple jobs. 4 Press [Yes]. If you do not want to cancel, press [No]. NOTE <NG> is displayed in the print jo b log screen for canceled print jobs.
Checking and Changing Print Jobs 2-17 2 Handling Different Print Jobs Canceling All Operations (Reset Printer) You can de lete (reset ) print data in memory a nd any jobs be ing process ed. IMPORTANT • If the machine is being u sed in a network, please note that resetting the printer function may affect data being received from other users.
Checking and Changing Print Jobs 2-18 2 Handling Different Print Jobs T emporarily Stopping Print Jobs You can temporarily stop jobs currently being processed or waiting to be processed. Handling Jobs from the Pr int Basic Features Screen To stop jobs temporarily from the Prin t Basic Features screen, follow the steps below.
Checking and Changing Print Jobs 2-19 2 Handling Different Print Jobs 3 Select the job to be stopped ➞ pres s [Details]. 4 Press [Pause]. The print job will stop temporarily. NOTE While printing is paused, [Pause] chang es to [Resume]. If you press [Resume], the print job will continue.
Checking and Changing Print Jobs 2-20 2 Handling Different Print Jobs Handling Jobs from the System Monitor Screen To stop jobs temporarily from the Syst em Monitor screen, follow the steps below. 1 Press [System Monitor] ➞ [Print]. 2 Press [Status].
Checking and Changing Print Jobs 2-21 2 Handling Different Print Jobs 4 Press [Pause]. The print job will stop temporarily. NOTE While printing is paused, [Pause] chang es to [Resume]. If you press [Resume], the print job will continue. 5 Press [Done].
Checking and Changing Print Jobs 2-22 2 Handling Different Print Jobs 1 Press [ ➞ ] ➞ [Print Job]. NOTE • You can set the Print Basic Features screen to be the initial screen, when the main powe.
Checking and Changing Print Jobs 2-23 2 Handling Different Print Jobs 4 Press [Form Feed]. 5 Press [Done]. The screen returns to the Basic Features screen. Handling a Job from the System Monitor Screen To force a job to be form fed from the System Monitor screen, follow the steps below.
Checking and Changing Print Jobs 2-24 2 Handling Different Print Jobs 3 Select the job to be form fed ➞ press [Details]. 4 Press [Form Feed]. 5 Press [Done].
Checking and Changing Print Jobs 2-25 2 Handling Different Print Jobs Skipping an Error during Printing If an error occurs during printing, you may be able to continu e printing depending on the error by pressing [Auto Continue]. However, an error is only tempo rarily cleared.
Checking and Changing Print Jobs 2-26 2 Handling Different Print Jobs 3 Select the job with an error to be sk ipped ➞ press [Details]. 4 Press [Auto Continue].
Checking and Changing Print Jobs 2-27 2 Handling Different Print Jobs 2 Press [Status]. 3 Select the job with an error to be sk ipped ➞ press [Details].
Checking and Changing Print Jobs 2-28 2 Handling Different Print Jobs 5 Press [Done]. The screen returns to the Basic Features screen. Printing Secured Documents You can print out documents (print data ) that have been assigned a password an d sent to this machine from a computer.
Checking and Changing Print Jobs 2-29 2 Handling Different Print Jobs Handling Jobs from the Pr int Basic Features Screen To print secured document s from the Print Basic Features screen, follow the steps below.
Checking and Changing Print Jobs 2-30 2 Handling Different Print Jobs 3 Select the secured document that you want to print ➞ press [Secured Print]. To display only secured documents (in c luding encrypted secu red documents) in the [Status] list, select [Secured Pr int] at 'Select Type'.
Checking and Changing Print Jobs 2-31 2 Handling Different Print Jobs NOTE • You cannot simultaneously sele ct secured documents and encrypted secured documents from the job list to clear their passwords. • Enter the same password that you originally assigned to the document at the computer.
Checking and Changing Print Jobs 2-32 2 Handling Different Print Jobs 3 Select the secured document that you want to print ➞ press [Secured Print]. 4 Enter the password using - (numeric keys) ➞ press [OK]. Printing starts. To cancel printing the se cured document, press [Cancel] on the Secured Pri nt screen.
Checking and Changing Print Jobs 2-33 2 Handling Different Print Jobs 5 Press [Done]. The display returns to t he Basic Features screen. Printing Encr ypted Secured Documents You can print out documents (p rint data) th at have bee n encrypted and sent to this machine fr om a comp uter.
Checking and Changing Print Jobs 2-34 2 Handling Different Print Jobs IMPORTANT • To use the Encrypted Secured Print function, the Encrypted Secure Print Soft ware is requi red.
3-1 CHAPTER 3 Printer Settings Menu This chapter describes h ow to use the Printer Settings menu and its submenus. Overview of Print er Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5 Settings Menu .
3-2 3. Printer Settings Menu 3 Printer Settings Menu CMS(Matching) Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-50 CMS(Matching)/Gamma . . . . . . . . . . . . . . . . . . . . . .
3. Printer Settings Menu 3-3 3 Printer Settings Menu CMYK Pure Black Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-71 Pure Black Text . . . . . . . . . . . . . . . . . . . . . . . . .
3-4 3. Printer Settings Menu 3 Printer Settings Menu Comment Print . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-97 Spot Color Matching . . . . . . . . . . . . . . . . . . .
Overview of Printer Settings 3-5 3 Printer Settings Menu Over view of Printer Settings The following table lists all settin gs of th e Printer Set tings menu. ■ Settings Menu Item Settings Applicable Page Copies 1 to 9999; 1 * p. 3-15 2-Sided Printing On, Off * p.
Overview of Printer Settings 3-6 3 Printer Settings Menu Offset Short Edge (Front ) -2.00 to +2.00 inches; 0.00 * inches p. 3- 24 Offset Long Edge (Front) -2.00 to +2.00 inches; 0.00 * inches p. 3-24 Offset Short Edge (Back) -2.00 to +2.00 inches; 0.00 * inches p.
Overview of Printer Settings 3-7 3 Printer Settings Menu An asterisk ( * ) indicates the default setting. * 1 The menu information will not be delivere d even if the De vice I nformation Delive ry Settings mode is used.
Overview of Printer Settings 3-8 3 Printer Settings Menu ■ UFR II Settings Item Settings Applicable Page Halftones Text Resolution * , Gradation , Error Diffusion p. 3-46 Graphics Resolution * , Gradation, Error Diff usion Image Resolution * , Gradation, Error Diff usion RGB Source Profile *1 Text sRGB * , Gamma 1.
Overview of Printer Settings 3-9 3 Printer Settings Menu An asterisk ( * ) indicates the default setting. * 1 The menu information will not be delivere d even if the De vice I nformation Delive ry Settings mode is used.
Overview of Printer Settings 3-10 3 Printer Settings Menu Enlarge A4 Pr int Width On, Off * p. 3-58 Halftones Text Resolution * , Gradation , Error Diffusion p. 3-59 Graphics Resolution * , Gradation, Error Diff usion Image Resolution * , Gradation, Error Diff usion RGB Source Profile *1 Text sRGB * , Gamma 1.
Overview of Printer Settings 3-11 3 Printer Settings Menu An asterisk ( * ) indicates the default setting. * 1 The menu information will not be delivere d even if the De vice I nformation Delive ry Settings mode is used.
Overview of Printer Settings 3-12 3 Printer Settings Menu An asterisk ( * ) indicates the default setting. * 1 The menu information will not be delivered even if the De vice Information Delivery Settings mode is used.
Overview of Printer Settings 3-13 3 Printer Settings Menu An asterisk (*) indicates the default setting. * 1 The menu information will not be delivere d even if the De vice I nformation Delive ry Settings mode is used.
Overview of Printer Settings 3-14 3 Printer Settings Menu An asterisk (*) indicates the default setting. * 1 The menu information will not be delivered even if the De vice Information Delivery Settings mode is used.
Settings Menu 3-15 3 Printer Settings Menu Settings Menu NOTE An asterisk (*) indicates the default setting in t his section. Copies 1 to 9999; 1 * This setting enables you to specify the number of copies printed. The defaul t setting is '1', b ut you can specify u p to 9999 copies.
Setti ngs Me nu 3-16 3 Printer Settings Menu Paper Feed ■ Default Paper Size Letter * , Legal, A4, A3, A5, 11" x 17", Executive, Statement, Envelope Mona rch, Envelope COM10, Envelope ISO-.
Settings Menu 3-17 3 Printer Settings Menu • Canon transparency film is recommend ed for printing on transparencies. • Canon label paper is recommended for printing on labels. • Plain Paper (Thin), Plain Paper (Standard), Plain Paper (Heavy), Recycled Paper, Color Paper, Pre-punched, and Bond Paper can be printed using two-sided printing.
Setti ngs Me nu 3-18 3 Printer Settings Menu ■ Toner Save On, Off * This setting enables you to set the Toner Save function. Toner Save uses less toner to print documents and may result in longer toner life. NOTE If [On] is selected for 'Toner Save', very light or finely detailed images m ay not be print ed clea rly.
Settings Menu 3-19 3 Printer Settings Menu ■ Image Compression Image Priority, Standard * , and Speed Priority This setting sets the compression mode when printing image data. Image data is compressed to be stored in the machine's memory when printing with this machine.
Setti ngs Me nu 3-20 3 Printer Settings Menu ■ Toner Volume Adjustment Normal * , Gradation, and Text This setting enables you to adjust the toner volume so that it falls within a restricted value when th e toner volume e xceeds a device-internal value fo r text, lines, or other types of print data.
Settings Menu 3-21 3 Printer Settings Menu Layout ■ Binding Location Long Edge * , Short Edge This parameter determines wheth er the binding position is along the long edg e or the short edge of the paper. When bind ing for two-sided printing, the image orientation is autom atically adjusted for correct layout.
Setti ngs Me nu 3-22 3 Printer Settings Menu ■ Margin -1.90 to +1.90 inches (in increments of 0.01 inches); 0.00 * inches This setting e nables you to se t the page ma rgin. The settings can be set in increments of 0.01" (0.5 mm) from -1 .90" (-50.
Settings Menu 3-23 3 Printer Settings Menu Binding Location : Long edge Margin : [+] ABC Binding Location : Long edge Margin : [-] Binding Location : Short edge Margin : [+] Binding Location : Short e.
Setti ngs Me nu 3-24 3 Printer Settings Menu ■ Offset Short Edge/Offset Long Edge (Front) -2.00 to +2.00 inches (in increments of 0.01 inches); 0.00 * inches This setting enables you to set the offset position. The settings can be set in increments of 0.
Settings Menu 3-25 3 Printer Settings Menu ■ Offset Short Edge/Offset Lo ng Edge (Back) -2.00 to +2.00 inches (in increments of 0.01 inches); 0.00 * inches This setting enables you to set the offset position. T he settings can be set in increments of 0.
Setti ngs Me nu 3-26 3 Printer Settings Menu Auto Continue On, Off * This setting enables you to automaticall y clear an error and continue printing when an error occurs (Error skip). If [On] is selected, error ski ps are performed automatical ly. If [Off] is selected, you m ust perform e rror skips from the touch panel display.
Settings Menu 3-27 3 Printer Settings Menu Timeout Timeout (5 to 300 seconds), Off; 15 * seconds When the 'Personality' is set to [Auto], the machine detects th e control commands and starts printing in the appropriate mode. After all the data has been received and the end of the data is detected, th e print mode stop s.
Setti ngs Me nu 3-28 3 Printer Settings Menu Print After Completing RIP On, Off * This setting sets whether to use the Print After Completing RIP function.
Settings Menu 3-29 3 Printer Settings Menu Finishing Off * , Collate, Rotate+Collate, Rotate+G roup, Offset+Collate, Offset+Group, Staple+Collate, and Staple+Group Copies to Offset (Offset +Collate): .
Setti ngs Me nu 3-30 3 Printer Settings Menu Rotate+Collate This setting p rints all pages of each co py (collating), and rota tes every other complete copy 90 de grees to indicate where each copy star ts. Rotate+Group This setting prints all copies of the same pag e before printing the next page.
Settings Menu 3-31 3 Printer Settings Menu Examples of each Finish er option when prin ting three copie s of a three page document: IMPORTANT Please note that the m emory of the machine ca n store up to 6,000 pa ges.
Setti ngs Me nu 3-32 3 Printer Settings Menu NOTE • [Rotate+Collate] and [Rotate+Group] are available if the paper size is LTR, LTRR, A4, A4R, JIS-B5, or JIS-B5R. • If [Rotate+Collate] or [Rotate+Group] is selected, part of t he print image may be cut off when the image is rotated.
Settings Menu 3-33 3 Printer Settings Menu • [Staple+Collate] and [Staple+Group] are available for selection if the paper size is 11" x 17", LG L, LTR, LTRR, EXEC, A3, JIS-B4, A4, A4R, or JI S-B5. Available staple locations depend on paper size and image orientation, as shown.
Setti ngs Me nu 3-34 3 Printer Settings Menu • The table below represents the maximum numb er of sheets that can be stapled. Finisher-Z1, Finisher-Y1/Saddle Finisher-Y2 • If the number of sheets exceeds these limits, they will not be stapled. • Make sure to select compatible settings when using Staple and Punch simultaneously.
Settings Menu 3-35 3 Printer Settings Menu Booklet On, Off * This setting enables you to prepare the pr intout for bin ding as a booklet. Bo oklet printing is a process whereby two pages of data are printed on the fro nt and back of one page and it is folded in half to create a bo ok.
Setti ngs Me nu 3-36 3 Printer Settings Menu Saddle Stitch On, Off * This setting enables you to bind a finished print job by stapling and fol ding the pages of a booklet in the center. IMPORTANT Please note that the m emory of the machine can store up to 6,000 pa ges.
Settings Menu 3-37 3 Printer Settings Menu Creep Correction Off * , Auto, and Correction Width (0.000 to 0.392 inches (in increments of 0.001 inches); 0.000 * inches) This setting enables you to adjust the pr int position of each page when printing a booklet using saddle stitch.
Setti ngs Me nu 3-38 3 Printer Settings Menu NOTE • This function is only available if 'Booklet' is set to [ On]. • Pressing [ ] increase the setting value by 0.001" (0.05 mm) each time the key is pressed. Pressing [ ] decreases the setting value by 0.
Settings Menu 3-39 3 Printer Settings Menu Copy Set Numbering ■ Copy Set Numbering On, Off * This setting enables you to print document s with a five digit serial number in the background on e ach copy.
Setti ngs Me nu 3-40 3 Printer Settings Menu • This function is only available if 'Tr ansparency Interleaving' is set to [Off ]. • If the number of printed copies exceeds '99999', it returns to ' 00001'.
Settings Menu 3-41 3 Printer Settings Menu ■ Density 1 to 5; 3 * This setting enables you to adjust the number density and has 5 levels you can adjust, with level '3' (middle level) bei ng the default setting. Selecting '1' makes the number lighter, and selecting '5' makes it darker.
Setti ngs Me nu 3-42 3 Printer Settings Menu IMPORTANT Please note that if the print position is adjust ed to place the d igits of the copy numbers outside the printable area, the portion outside the printable area is not printed. NOTE • This function is only available if 'Copy Set Numbering' is set to [On].
Settings Menu 3-43 3 Printer Settings Menu PDF1.5 This assigns priority to the PDF1.5 mode. NOTE This function is not available when printing in the UFR II Printer. Color Mode Auto Detect * , Full Color, and Black and White This setting enables you to set the color mode you want to speci fy when printing.
Setti ngs Me nu 3-44 3 Printer Settings Menu Gradation Settings Gradation: Off * , Smooth 1, and Smooth 2 Graphics: On * , Off Image: On * , Off Set this function when the gradation of graphics (illustrations made b y software applications) or images (b itmap image s) does not print smoothly (the color changes stand out).
Settings Menu 3-45 3 Printer Settings Menu NOTE Even if [Output] is selected and the data is highly compressed, the data ma y still be too large to be stored in the machine's memory. In this case, the job is canceled and an error is logged in the Print Log.
UFR II Settings 3-46 3 Printer Settings Menu UFR II Settings NOTE An asterisk (*) indicates the default setting in this sect ion. Halftones Text: Resolution * , Gradation, and Error Di ffusion Graphic.
UFR II Settings 3-47 3 Printer Settings Menu NOTE A dither pattern creates the illusion of varying shades of gray or additional colors by treating areas of an image as groups of dots that are colored in diff erent patterns. RGB Source Profile Text: sRGB * , Gamma 1.
UFR II Settings 3-48 3 Printer Settings Menu Output Profile Text: Normal * , Photo Graphics: Normal * , Photo Image: Normal, Photo * This setting allows you to d efine the profil e that is appropriate for the data you are going to print. It is applied to all data in the print job, so make sure the selected profile is right for your job.
UFR II Settings 3-49 3 Printer Settings Menu NOTE This setting is only applied if 'CMS(Matching)/Gamma' is set to [CMS]. Gray Compensation Text: On * , Off Graphics: On * , Off Image: On * , Off This setting de termines whet her only black (K) toner is used.
UFR II Settings 3-50 3 Printer Settings Menu CMS(Matching) Selection Printer * , Host This setting a llows you to select whe ther the color process w ill be done by the printer or the host comp uter (printer driver). If [Printer] is selected, the color proce ss will be done by the printer.
UFR II Settings 3-51 3 Printer Settings Menu Gamma Text: 1.0, 1.4 * , 1.8, 2.2 Graphics: 1.0, 1.4 * , 1.8, 2.2 Image: 1.0, 1.4 * , 1.8, 2.2 The brightness of printing can be ad justed to not lose the brightest and darkest portions of the ori ginal data.
UFR II Settings 3-52 3 Printer Settings Menu NOTE • 'Graphics' and 'Text' can only be selected when [Smooth 1] or [Smooth 2] is selected for Advanced S moothing.
PCL Settings 3-53 3 Printer Settings Menu PCL Settings NOTE • These settings are only available when printing in the PCL or PS Printer. • An asterisk (*) indicates the default setting in t his section. Paper Save On, Off * This setting specifies whether to output a bla nk page when software does not send print data between En d Page codes.
PCL Settings 3-54 3 Printer Settings Menu Font Number 0 to 91; 0 * You can set the default font typeface for this printer fu nction usin g the corresponding font numbers. Val id font numbers are from 0 to 91. Point Size 4.00 to 999.75 point (in increm ents of 0.
PCL Settings 3-55 3 Printer Settings Menu Symbol Set DESKTOP, ISO4, ISO6, ISO11, ISO15, IS O17, ISO21, ISO60, ISO6 9, ISOL1, ISOL2, ISOL5, ISOL6, LEGAL, MA TH8, MCTEXT, MSPUBL, PC775, PC8 * , PC850, P.
PCL Settings 3-56 3 Printer Settings Menu X dimension 5.51 to 24.80 inches; 18.00 * inches This setting enables you to specify the X dimension of the custom paper. The X dimension can be adju sted from 5.51" (140 mm) through 24.80" (630 mm) in increments of 0.
PCL Settings 3-57 3 Printer Settings Menu Append CR to LF Yes, No * This setting enables you to specify whether to append a carriage return (CR) when line feed code (LF) is received. If [Yes] is selected, the print head move s to the beginning of the next line when line feed code is received.
PCL Settings 3-58 3 Printer Settings Menu Enlarge A4 Print Width On, Off * This setting determines whether to expand the printa ble area of A4 size paper to that of Letter size in width. If [On] is selected, all t he area on a page 1/6" (4.23 mm) from the top a nd bottom edges and 11/80" (3.
PCL Settings 3-59 3 Printer Settings Menu Halftones Text: Resolution * , Gradation, and Error Di ffusion Graphics: Resolution * , Gradation, and Error Di ffusion Image: Resolution * , Gradation, a nd Error Diffusion This setting sp ecifies how you print h alftones.
PCL Settings 3-60 3 Printer Settings Menu RGB Source Profile Text: sRGB * , Gamma 1.5, Gamma 1.8, Gamma 2.4, and Downloa d Profile Graphics: sRGB * , Gamma 1.5, Gamma 1.8, Gamma 2.4, and Download Pro file Image: sRGB * , Gamma 1.5, G amma 1.8 , Gamma 2.
PCL Settings 3-61 3 Printer Settings Menu Output Profile Text: Normal * , Photo Graphics: Normal * , Photo Image: Normal, Photo * This setting allows you to define the profil e tha t is appropriate for the data you are going to print. It is applied to all data in the print job, so ma ke sure the selected profile is right for your job.
PCL Settings 3-62 3 Printer Settings Menu NOTE This setting is only applied if 'CMS(Matching)/Gamma' is set to [CMS]. Gray Compensation Text: On * , Off Graphics: On * , Off Image: On * , Off This setting de termines whet her only black (K) toner is used.
PCL Settings 3-63 3 Printer Settings Menu CMS(Matching) Selection Printer * , Host This setting a llows you to select whe ther the color process will be done by the printer or the host comp uter (printer driver). If [Printer] is selected, the color process wil l be done by the printer.
PCL Settings 3-64 3 Printer Settings Menu Gamma Text: 1.0, 1.4 * , 1.8, 2.2 Graphics: 1.0, 1.4 * , 1.8, 2.2 Image: 1. 0, 1.4 * , 1.8, 2.2 The brightness of printing can be adjusted to not lose the brigh test and darkest portions o f the origin al data.
PS Settings 3-65 3 Printer Settings Menu PS Settings NOTE • These settings are only available when printing in the PS Printer. • An asterisk (*) indicates the default setting in t his section. Job Timeout 0 to 3600 seconds; 0 * seconds This setting enables you to specify the amount of time before a job times out.
PS Settings 3-66 3 Printer Settings Menu RGB Source Profile sRGB * , Gamma 1.5, Gamma 1.8, Gamma 2. 4, None, and Download Profile This setting a llows you to specify th e RGB profile (color dat a represen ted using the RGB (Red Green Blue) color model ) that is appropria te for the characteristics of your monitor.
PS Settings 3-67 3 Printer Settings Menu NOTE • Device independent colors are not dependent on any particular device, such as a monitor, and are meant to be true representations of colors as perceived by the human eye.
PS Settings 3-68 3 Printer Settings Menu IMPORTANT • You may not be able to use a ll the profiles that are available. If color data is printed in gray using a dow nloaded profile, check the downloaded profile for com patibility.
PS Settings 3-69 3 Printer Settings Menu Output Profile Normal, Photo, TR Normal * , TR Photo, and Download Profile This setting allows you to define the profil e tha t is appropriate for the data you are going to print. It is applied to all data in the print job, so ma ke sure the selected profile is right for your job.
PS Settings 3-70 3 Printer Settings Menu Matching Method Perceptual * , Saturation, and Colori metric This setting allows you to specify a me thod of printing when the 'RGB Source Profile' is applied. This machine includes a co lor management system that provides the following color ren dering styles.
PS Settings 3-71 3 Printer Settings Menu RGB Pure Black Process On * , Off This setting enables you to specify how black and gray data with the equivalent ratio of R to G to B should be processed when device dependent RGB data is converted into device dependent CMYK data using th e 'RGB Source Profile' of the machine.
PS Settings 3-72 3 Printer Settings Menu - When [On] is selected for 'Pure Black Te xt' - When [None] is selected for 'CMYK S imulation Profile' - When [TR Normal] o r [TR Photo] i.
PS Settings 3-73 3 Printer Settings Menu Black Overprint On * , Off This setting a llows you to choose a spec ific way to print black text when printing black text over a color backgrou nd or graphics. If [On] is selected, you can overprint black text.
PS Settings 3-74 3 Printer Settings Menu Combine Color Separations On, Off * This setting specifies whether to combine and prin t separation data created by application software on one pa ge. The combi ned data is printed in color so you can check overprinting or the final color finish.
PS Settings 3-75 3 Printer Settings Menu Halftones Text: Resolution * , Gradation, and Error Di ffusion Graphics: Resolution * , Gradation, and Error Di ffusion Image: Resolution * , Gradation, a nd Error Diffusion This setting sp ecifies how you print h alftones.
PS Settings 3-76 3 Printer Settings Menu Composite Overprint On, Off * You can overprint device-d ependent CMYK data a s composite output. All colors used for data are overlaid and printed on one plate so you ca n check the finished result without separati ng the colors.
PS Settings 3-77 3 Printer Settings Menu IMPORTANT • This setting allows you to apply smoothing to graphics data and text data. Smoothing is not applied to image data. • The setting for 'Text' is invalid i f 'Resolution' is set to [1200 dpi].
Imaging Settings 3-78 3 Printer Settings Menu Imaging Settings Settings on this menu specify how to print TIF F (Tagged Image File Format) and JPEG (Joint Photographic Experts Gr oup) images that are sent directly to the machine using the Remote UI or command prompt.
Imaging Settings 3-79 3 Printer Settings Menu Zoom Off * , Auto This setting enlarges or reduces the size of an image to match the printable area of the paper size specified. If [Auto] is selected, the size of the imag e is automaticall y enlarged or reduced to match the printable area of the specified pa per size.
Imaging Settings 3-80 3 Printer Settings Menu Show Warnings On * , Off This setting specifies the action to be taken if an error asso ciated with printing an image occurs on the machine. If [On] is selected, an error message is displayed. If [Off] is selected, the print job is canc eled and an error messa ge is not displayed.
Imaging Settings 3-81 3 Printer Settings Menu Halftones Resolution * , Gradation, and Error Diffusion This setting sp ecifies how you print h alftones. Halftoning is used to print each process color at a different intensity, allowing millions of different color to be reproduced using only the four process colors.
Imaging Settings 3-82 3 Printer Settings Menu RGB Source Profile sRGB * , Gamma 1.5, Gamma 1.8, Gamma 2.4, and Download Profile This setting a llows you to specify th e RGB profile (color dat a represen ted using the RGB (Red Green Blue) color model ) that is appropria te for the characteristics of your monitor.
Imaging Settings 3-83 3 Printer Settings Menu CMYK Simulation Profile JapanColor(Canon) * , US Web Ctd(Canon), Euro Standard, and Download Profile This setting allows you to specify the simulation targ et to print the CMYK (Cyan Magenta Yellow blacK) data.
Imaging Settings 3-84 3 Printer Settings Menu Matching Method Perceptual * , Saturation, and Colori metric This setting allows you to specify a me thod of printing when the 'RGB Source Profile' is applied. This machine includes a co lor management system that provides the following color ren dering styles.
PDF1.5 Settings 3-85 3 Printer Settings Menu PDF1.5 Settings Settings on this menu specify how to print PDF files that are se nt directly to the machine using the Remote UI or command prompt. NOTE • These settings are only available for the PS Printer.
PDF1.5 Settings 3-86 3 Printer Settings Menu sRGB This setting specifies the industry sta ndard definition for generic Windows (PC) monitors. If you are using an sRGB compat ible monitor, you can print out colors close to how they appear on your monitor.
PDF1.5 Settings 3-87 3 Printer Settings Menu CMYK Simulation Profile JapanColor(Canon), US Web Ctd(Cano n), Euro Standard, None * , and Download Profile This setting allows you to specify the simulation targ et to print the CMYK (Cyan Magenta Yellow blacK) data.
PDF1.5 Settings 3-88 3 Printer Settings Menu Output Profile Normal * , Photo, and Download Profile This setting allows you to d efine the profil e that is appropriate for the data you are going to print. It is applied to all data in the print job, so make sure the selected profile is right for your job.
PDF1.5 Settings 3-89 3 Printer Settings Menu Matching Method Perceptual * , Saturation, and Colori metric This setting allows you to specify a me thod of printing when the 'RGB Source Profile' is applied. This machine incl udes a col or management system that provides the following colo r rendering styles.
PDF1.5 Settings 3-90 3 Printer Settings Menu Pure Black Text On * , Off This setting affects the printout for black (R=G =B=0% or C=M=Y=100%/Bk=N% or C=M=Y=0%/Bk=100%) text on a page. Under most ci rcumstances it is preferable to leave th is option se t to [On].
PDF1.5 Settings 3-91 3 Printer Settings Menu Black Overprint On * , Off This setting a llows you to choose a spec ific way to print black text when printing black text over a color backgrou nd or graphics. If [On] is selected, you can overprint black text.
PDF1.5 Settings 3-92 3 Printer Settings Menu Composite Overprint On, Off * You can overprint device-d ependent CMYK data a s composite output. All colors used for data are overlaid and printed on one plate so you ca n check the finished result without separati ng the colors.
PDF1.5 Settings 3-93 3 Printer Settings Menu Gray Compensation On * , Off This setting de termines whet her only black (K) toner is used. If [On] is selected, black and gray data is printed using the black (K) toner only, which lessens toner bleeding.
PDF1.5 Settings 3-94 3 Printer Settings Menu Enlarge Print Area On, Off * This setting specifies whether to enlarge the prin table area to the edge of the paper. If [On] is selected, the printable area is enlarged to 0 mm from the top, bottom, left, and right edges of the paper.
PDF1.5 Settings 3-95 3 Printer Settings Menu N-up Print Off * , 2 on 1, 4 on 1, 6 on 1, 8 on 1, 9 on 1, and 16 on 1 You can print several pages of PDF file data on 1 sheet of paper. Multiple pages are printed from (top) left to right. Example: If 'Vertical' is specified in the PDF file Page Setu p.
PDF1.5 Settings 3-96 3 Printer Settings Menu Halftones Text: Resolution * , Gradation, and Error Di ffusion Graphics: Resolution * , Gradation, and Error Diffusio n Image: Resolution * , Gradation, and Error Diffusio n This setting sp ecifies how you print h alftones.
PDF1.5 Settings 3-97 3 Printer Settings Menu Comment Print Auto * , On, and Off This setting specifies whether to print annotations in the PDF file. If [Auto] is selected, only the annotations specified for pr inting in the PDF file are printed. If [On] is selected, a ll annotations are printed.
PDF1.5 Settings 3-98 3 Printer Settings Menu NOTE • 'Graphics' and 'Text' can only be selected when [Smooth 1] or [Smooth 2] is selected for Advanced S moothing. • The results of Advanced Smoothing may differ depending on the characters and graphics patterns.
Utility M enu 3-99 3 Printer Settings Menu Utility Menu NOTE Hard disk initialization is only available for the PCL or PS Printer. Initialize PCL Hard Disk — If trouble occurs when fonts or ma cros are downloaded from a personal computer to this machine using the download utility, initialize the PCL hard disk parti tion.
Utility Menu 3-100 3 Printer Settings Menu Reset Printer — If you want to clear all print jobs in progress as wel l as data that has been received in memory, you must reset the printer function. Resetting the printer deletes print jobs in the machine's me mory and the print data that has been received by all interfaces.
4-1 CHAPTER 4 Report Settings Menu This chapter describes how to use the Report Settings menu to check the confi guration of the print function or print a font list, color te st page, or color chart. Th is menu is only avai lable for the PCL or PS Printer.
Overview of Report Settings 4-2 4 Report Settings Menu Over view of Report Settings The following table lists all settin gs of the Report Settings menu. NOTE This menu is only available for the PCL or PS Printer. ■ Printer Menu Item Settings Applicab le Page PCL Configuration Page — p.
PCL Menu 4-3 4 Report Settings Menu PCL Menu Configuration Page — Details of RAM capacity, settings in t he printer's menus, etc., are printed. If you select Configuration Page, the confirmati on message <Print the Configuration page?> is displayed.
PS Menu 4-4 4 Report Settings Menu PS Menu Configuration Page — Details of RAM capacity, settings in the printer's menus, etc., are printed. If you select Configuration Page, the confirmatio n message <Print the Configuration page?> is displayed.
PS Menu 4-5 4 Report Settings Menu RGB Color Chart — Settings and RGB color chart he ld by the printer are printed. If you select Color Chart, the confirmation message <Print the RGB Color Chart?> is displayed. If you select [Yes], the test page is printed, and if you select [No], it is not printed.
PS Menu 4-6 4 Report Settings Menu.
5-1 CHAPTER 5 How to Use the Direct Print Function This chapter describes Direct Printing features, system environments that you can use the Remote UI in, and how to use the Direct Print function. Overview of Direct Printing . . . . . . . . . . . . . .
Overview of Direct Printing 5-2 5 How to Use the Direct Print Function Over view of Direct Printing Direct Print is a print function that enab les you to send a file without using a prin ter driver from the host terminal to the machi ne, which recognizes the file.
System Requirements 5-3 5 How to Use the Direct Print Function System Requirements The system requiremen ts for the R emote UI are as follows: ■ Windows • OS (Operating System) - Microsoft Wind ow.
Printing Directly from the Remote UI 5-4 5 How to Use the Direct Print Function Printing Directly from the Remote UI You can print PDF files or Image files (T IFF/JPEG) directly from the Remote UI, without having to op en the files. For more infor mation on the basic operations of the Remote UI, see the Remote UI Guide .
Printing Directly from the Remote UI 5-5 5 How to Use the Direct Print Function 1 Start your web browser ➞ enter the appropriate URL into [Address] or [Location]. http://<the IP addr ess of the device>/ NOTE • If you do not know the a ppropriate UR L, consult your system administrator.
Printing Directly from the Remote UI 5-6 5 How to Use the Direct Print Function 3 Specify the location of the PDF file that you want to print. ● To Specify the [F ile Path] ❑ Click [Browse] ➞ click [Open] after selecting the file.
Printing Directly from the Remote UI 5-7 5 How to Use the Direct Print Function ● To Specify the [URL] ❑ Enter the URL of the PDF file you want to print.
Printing Directly from the Remote UI 5-8 5 How to Use the Direct Print Function 4 Enter the password in [Document Password] to open PDF files that have a password specifi ed. IMPORTANT • If you try to print without entering the password, the error message <PDL PDF Data Decode Err> is displayed and printing is canceled.
Printing Directly from the Remote UI 5-9 5 How to Use the Direct Print Function 5 Specify the settings for [Specify Print Range]. Select [All] to print ever y page. If you want to specify the pages to p r int by the page number , click [Pages] ➞ enter the page numbers.
Printing Directly from the Remote UI 5-10 5 How to Use the Direct Print Function 6 Specify the settings under [Quality Setting s] according to your preference. Details of each menu are shown below . [Resolution] This setting specifies the resolution for printing.
Printing Directly from the Remote UI 5-11 5 How to Use the Direct Print Function [Halftones] This setting specifies how you print halftones. Halftoning is used to print each process color at a differ ent intensity , allo wing millions of different color to be r eproduced using only the four process colors.
Printing Directly from the Remote UI 5-12 5 How to Use the Direct Print Function 7 Specify the settings under [Color Settings] according t o your preference. Details of each menu are shown below . [Color Mode] This setting enables you to set the colo r mode you want to specify when printing.
Printing Directly from the Remote UI 5-13 5 How to Use the Direct Print Function [RGB Source Profile] This setting allows you to specify the RGB profile (color data repr esented using the RGB (Red Green Blue) color model) that is appropriate for the character istics of your monitor .
Printing Directly from the Remote UI 5-14 5 How to Use the Direct Print Function [Output Profile] This setting allows you to define th e pr ofile that is appr opri ate for the data you are going to print. It is applied to all da ta in the print job, so make sure the selected pr ofile is right for your job.
Printing Directly from the Remote UI 5-15 5 How to Use the Direct Print Function [Black Overprint] This setting allows you to choose a specific way to print black text when printing black text over a color background or graphics. If you enable this option, you can overprint black text.
Printing Directly from the Remote UI 5-16 5 How to Use the Direct Print Function 8 Specify the settings under [Print Settings] a ccording to your preference. Details of each menu are shown below . [Copies] This setting enables yo u to specify the number of copies printed.
Printing Directly from the Remote UI 5-17 5 How to Use the Direct Print Function [Enlarge Print Area] This setting specifies whether to enlarge the printable area to the edge of the paper . [2-Sided] This setting specifies whether to print on one-side or both sides of the paper .
Printing Directly from the Remote UI 5-18 5 How to Use the Direct Print Function * The settings and set tings values displayed on th e Remote UI differ depen ding on which opti ons are attached. [Hole Punch] * This setting allows you to pun ch holes in the printed-pape r .
Printing Directly from the Remote UI 5-19 5 How to Use the Direct Print Function 9 Click [Start Print]. Click [Reset] to return the se ttings to their default values.
Printing Directly from the Remote UI 5-20 5 How to Use the Direct Print Function After sending of a print job is complete d, the screen changes and th e following message appears. Click [to Job List] to verify sent pr int jobs that have already been sent.
Printing Directly from the Remote UI 5-21 5 How to Use the Direct Print Function Printing PS/EPS Files Directly Follow the steps below for Direct Printing of a PS/EPS file from the Remote UI. 1 Start your web browser ➞ enter the appropriate URL into [Address] or [Location].
Printing Directly from the Remote UI 5-22 5 How to Use the Direct Print Function 2 Click [Direct Print] ➞ select [PS/EPS File] from the menu that appears under [Direct Print]. If Department ID Ma nagement is set, a dialog box prompting you to enter th e Department ID and passwor d appears.
Printing Directly from the Remote UI 5-23 5 How to Use the Direct Print Function 3 Specify the location of the PS/EPS file that y ou want to print. Click [Browse] ➞ click [Open] after selecting the file.
Printing Directly from the Remote UI 5-24 5 How to Use the Direct Print Function 4 Specify the settings under [Print Settings] a ccording to your preference. Details of each menu are shown below . [Color Mode] This setting enables you to set the colo r mode you want to specify when printing.
Printing Directly from the Remote UI 5-25 5 How to Use the Direct Print Function [2-Sided] This setting specifies whether to print on one-side or both sides of the paper . [Binding Location] This setting specifies whether to place the binding positio n along the long edge or the shor t edge of the pa per .
Printing Directly from the Remote UI 5-26 5 How to Use the Direct Print Function * The settings and set tings values displayed on th e Remote UI differ depen ding on which opti ons are attached. 5 Click [Start Print]. Click [Reset] to return the settings to their defa ult values.
Printing Directly from the Remote UI 5-27 5 How to Use the Direct Print Function After sending of a print job is completed, the screen changes and the fol lowing message appears. Click [to Job List] to verify sent pr int jobs that have already been sent.
Printing Directly from the Remote UI 5-28 5 How to Use the Direct Print Function Printing Image Files Directly Follow the steps below for Direct Printing of a TIFF/JPEG image file from the Remote UI. Direct printing of image files for JPEG im ages supports specifications for ITU-T Recommendation T.
Printing Directly from the Remote UI 5-29 5 How to Use the Direct Print Function 1 Start your web browser ➞ enter the appropriate URL into [Address] or [Location]. http://<the IP addr ess of the device>/ NOTE • If you do not know the a ppropriate UR L, consult your system administrator.
Printing Directly from the Remote UI 5-30 5 How to Use the Direct Print Function 3 Specify the location of the Image file th at you want to print. Click [Browse] ➞ click [Open] after selecting the file.
Printing Directly from the Remote UI 5-31 5 How to Use the Direct Print Function 4 Specify the settings for [Specify Print Range]. Select [All] to print ever y page. If you want to specify the pages to p r int by the page number , click [Pages] ➞ enter the page numbers.
Printing Directly from the Remote UI 5-32 5 How to Use the Direct Print Function 5 Specify the settings under [Print Settings] a ccording to your preference. Details of each menu are shown below . [Color Mode] This setting enables you to set the colo r mode you want to specify when printing.
Printing Directly from the Remote UI 5-33 5 How to Use the Direct Print Function [Image Orientation] This setting specifies whether to print an image vertically or horizontally . • If [Auto] is selected, orientation is automatically adjusted by comparing length and width of t he image (TIFF/JPEG data).
Printing Directly from the Remote UI 5-34 5 How to Use the Direct Print Function [Enable Exif Adjustment] This setting prints Exif (Exchangea ble Image File For mat) image data close to the conditions when the images were taken.
Printing Directly from the Remote UI 5-35 5 How to Use the Direct Print Function [CMYK Simulatio n Profile] This setting allows you to specify the simulation ta rget to print the CMYK (Cyan Magenta Y ellow blacK) da ta.
Printing Directly from the Remote UI 5-36 5 How to Use the Direct Print Function 6 Click [Start Print]. Click [Reset] to return the settings to their defa ult values.
Printing Directly from the Remote UI 5-37 5 How to Use the Direct Print Function After sending of a print job is completed, the screen changes and the fol lowing message appears. Click [to Job List] to verify sent pr int jobs that have already been sent.
Printing Directly Using the Command Pr ompt 5-38 5 How to Use the Direct Print Function Printing Directly Using the Command Prompt You can print directly by entering th e LPR command in the command prompt.
6-1 CHAPTER 6 T roubleshooting This chapter explains how to solve printing probl ems and the remedial ste ps to take if printing fails. Responding to Error Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Responding to Error Messages 6-2 6 Troubleshooting Responding to Error Messages When the Error indicator is orange, printing is not possible. If this happens during printing, the print operat ion stops. Read the displayed error me ssage to determine the appropriate action s necessary to correc t the problem.
Responding to Error Messages 6-3 6 Troubleshooting 2 Press [Printer Settings]. When a Service Call error occurs, the nor mal Printer Settings screen does not appear and only the Reset Printer sc reen appears.
When a Message Is Displayed 6-4 6 Troubleshooting When a Message Is Displayed If the machine is unable to pr int for some reason, the Error indicator lights up and a message indicating the cause of the pr oblem is displayed on the touch panel display.
When a Message Is Displayed 6-5 6 Troubleshooting PDL Font Memory Full Error Skip Cause The machine's me mory space allo cate d fo r fonts is full and printing cannot proceed. Remedy Change the font setting in the printer driver and try printing ag ain.
When a Message Is Displayed 6-6 6 Troubleshooting PDL IMG Process. Error Cause An error occurred while processing TI FF or JPEG images. Remedy After canceling the print job, reset th e printer and print again . (Note that print data in memory such as secured print jobs and any jobs being processed will be deleted.
When a Message Is Displayed 6-7 6 Troubleshooting PDL Pattern Memory Full Error Skip Cause The machine's me mory space allo cated for patterns is full and printing cannot proceed. Remedy Change the pattern setting in the printer driver and try printing again.
When a Message Is Displayed 6-8 6 Troubleshooting PDL PDF Data Decode Err Cause 1 The password you entered in the PDF file is inco rrect. Remedy Enter the correct password and print the data again. Cause 2 The Security settings in the PDF file do not allow printing.
When a Message Is Displayed 6-9 6 Troubleshooting PDL PDF Font Error Cause There is font in the PDF data that cannot be processed. Remedy Contact your local authorized Canon de aler. PDL PDF HDD Access Error Cause An error occurred while the PDF data was being loa ded from the hard disk.
When a Message Is Displayed 6-10 6 Troubleshooting PDL PDF Page Comp. Error Cause There was compressed data in the PDF page that cannot be processed by the machine. Remedy 1 After canceling the pr int job, try printi ng again with PDF data that is compatible with the machine.
When a Message Is Displayed 6-11 6 Troubleshooting PDL PDF Transparency Error Error Skip Cause There are transparent objects in the PDF data that the machine cannot process. Remedy 1 After canceling the pr int job, optimize the PDF or flatten the tra nsparent object and convert it into a form at that the machine can pr ocess and print again.
When a Message Is Displayed 6-12 6 Troubleshooting PDL UFR II Layout Error Error Skip Cause The page layout cannot be processed due to lack of memory. Remedy 1 Set the Graph ics Mode in the UFR II pr i nter driver to 'Raster Mode ' and print the data again.
When a Message Is Displayed 6-13 6 Troubleshooting PDL Warning Cause An internal error has occurre d for the printer function. Remedy Perform a printer reset to try to initialize the function again. If this error persists, contact your local authorized Canon dealer.
Printing Problems 6-14 6 Troubleshooting Printing Problems If you have trouble printing , we re commend resolving th e problems with the following remedies. NOTE Please contact your loca l authorized Canon dealer if a problem persists, o r if you encounter problems not listed below.
Printing Problems 6-15 6 Troubleshooting You cannot store a secu red print job. Cause The number of secured jobs stored in the machine has exceeded the maximum capacity of 50 jobs, or the total number of pages th at are stored or are in jobs has exceeded the limit (6,000 pages).
Printing Problems 6-16 6 Troubleshooting You cannot print the last page. Cause The command th at identif ies the end of the data has not been sent from the PC.
Printing Problems 6-17 6 Troubleshooting Data that should be printed on th e same page is printed on two se parate pages. Cause 1 The application software' s "Line spacing" a nd "Number of lin es on a page" settings are not correct.
Printing Problems 6-18 6 Troubleshooting Toner does not fix properly. Cause Toner may not fix well on some types of paper. Remedy 1 Enable 'Gray C ompensation' in the printer driver and print the data a gain. (See the Help function on the printer driver.
Printing Problems 6-19 6 Troubleshooting The specified color of thin lines or fill ed-in patterns do not print or disappear. Cause 1 The combination of the color or pattern cannot be reproduced correctly. Remedy 1 Adjust the color in the software application you are using and print the data again.
Printing Problems 6-20 6 Troubleshooting NOTE You can also perform the same procedure from the touch panel display. (See "Halftones," on p. 3-46, p. 3-59, p. 3-75, p. 3 -81, p. 3-96.) The color of the photograph-like printout is different to the color on the display.
Printing Problems 6-21 6 Troubleshooting Characters are blurred. Cause 1 Thi ck font is used for characters. Remedy Use thinner font and print the data a gain. Cause 2 B lack characters are printed using C (C yan), M (Magenta), Y (Yellow), and K (blacK) toners.
Printing Problems 6-22 6 Troubleshooting Thin lines and fin e characters bleed. Cause The specified thin lines and fine characters cannot be processed prope rly. Remedy 1 Adjust the color in the software application you are using and print the data again.
Printing Problems 6-23 6 Troubleshooting The frame of the image that you in serted, which is not visible on your monitor, is printed in a color different to that of the color surrounding the frame. Cause Depending on the application software an d OS that you are using, the me thod in which halftones and colors are processed may be different.
Printing Problems 6-24 6 Troubleshooting NOTE You can also perform the same procedure from the touch panel display. (See "Line Control," on p. 3-20.) Gradation in the black or gray p arts of the im age does not appear smooth (the color chang es stand out).
Printing Problems 6-25 6 Troubleshooting Fine lines and ch aracters with a small p oint size are light. Cause The specified thin lines and fine characters cannot be processed prope rly.
Printing Problems 6-26 6 Troubleshooting Jagged edges are visible in an image. Cause 1 Combin ation with halftone patterns may cause the problem. Remedy Set [Halftones] in the printer driver to [Error Diffusion] for the kind of data in which jagged edges are visible and perform printing again.
If Trouble Occurs When Downloading Fo nt s or Macros from a Personal Computer 6-27 6 Troubleshooting If T rouble Occurs When Downloading Fonts or Macros from a Personal Computer If trouble occurs whe .
If Trouble Occurs When Downloading Fonts or Macros from a Personal Computer 6-28 6 Troubleshooting 2 Press (Additional Functions). 3 Press [Printer Settings].
If Trouble Occurs When Downloading Fo nt s or Macros from a Personal Computer 6-29 6 Troubleshooting 5 Press [Initialize PCL Hard Disk]. A confirmation message a ppears. NOTE If you cannot press [Initialize PCL Hard Disk], t he hard disk cannot be initialized.
If Trouble Occurs When Downloading Fonts or Macros from a Personal Computer 6-30 6 Troubleshooting The following screen is disp layed and the hard disk is initialize d. During initialization, the Processing/Data indicator blinks green. When the initialization of the hard disk is completed, the Processing/Data indicator goes out.
7-1 CHAPTER 7 Appendix This chapter shows print samples for different fonts, describes font information, including sources and font lists, and lists a summary of the specifications for the machine. Some Basic Facts about Fonts . . . . . . . . . . . . .
Some Basic Facts about Fonts 7-2 7 Appendix Some Basic Facts about Fonts This section summarizes some of the ba sic facts you should know about fonts. What Is a Font? A font is a collection of letters and sy mbols used when printing a document. In general, a gr oup of letters and symbols sharing a common design is referred to as a font.
Some Basic Facts about Fonts 7-3 7 Appendix T ypeface Typeface refers to the design of the charac ters and symbols. The following figure shows an example of some typefaces. Stroke Weight Stroke weight refers to the th ickness of the print. There ar e light, medium, and bold stroke weights.
Some Basic Facts about Fonts 7-4 7 Appendix Point Size Point size refers to the height of the c haracter. Character size is measured in points. One inch is divided into 72 points and 1 point is 1/72 of an inch (about 0.35 mm). The prin ter function has bitm ap ped fonts and scalable fonts available.
Some Basic Facts about Fonts 7-5 7 Appendix Character Width (Fixed and PS) Each characte r has a diff eren t width from all the other c haracters in a font at a given point size.
Some Basic Facts about Fonts 7-6 7 Appendix Symbol Set When you print the letter "A," the host computer sends a code corresponding to "A" (hexadecimal 41 is an example of this) to the machine. This cod e is referred to as the characte r code.
Some Basic Facts about Fonts 7-7 7 Appendix Bitmapped fonts are fixed in size and specif ied by characteristics called "attributes," such as typeface, stroke weight, style an d so on. Various types of bitm apped fonts are produced by th e combination of these attributes.
Some Basic Facts about Fonts 7-8 7 Appendix Standard Scalable Fonts (PCL) With scalable fonts, characters are fre ely enlarged or co mpresse d from one point to any size you wish in 0.1 point increm ents. (The m aximum rang e of scalin g depends on the size of the memory installed in the machine and the size of the paper used.
Some Basic Facts about Fonts 7-9 7 Appendix OCR Sets Fonts (PCL) Symbol Sets (For Scalable T ypefaces Only) The following symbol sets a re included with the machine.
Some Basic Facts about Fonts 7-10 7 Appendix PS Fonts AlbertusMT AlbertusMT Italic AlbertusMT Light AntiqueOlive Roman AntiqueOliveCE Roman AntiqueOlive Italic AntiqueOliveCE Italic AntiqueOlive Bold .
Some Basic Facts about Fonts 7-11 7 Appendix Helvetica HelveticaCE Helvetica Oblique HelveticaCE Oblique Helvetica Bold HelveticaCE Bold Helvetica BoldOblique HelveticaCE BoldOblique Helvetica Condens.
Some Basic Facts about Fonts 7-12 7 Appendix StempelGaramond Italic StempelGaramondCE Italic StempelGaramond Bold StempelGaramondCE Bold StempelGaramond BoldItalic StempelGaramondCE BoldItalic Symbol .
Checking the Font Lists for Available Fonts 7-13 7 Appendix Checking the Font Lists for A vailable Fonts Font lists are a comprehensive listing of a ll fonts curr ently available. The listing contains both the names of resident fo nts, and the names of the fonts stored on any external hard disk that may be presen t.
Checking the Font Lists for Available Fonts 7-14 7 Appendix The Font List includes the following information: * If the font supports more than one symbol set, a comm and parameter (in dicated with xY or xM) will not be shown. a Font/Symbol Set* The typeface name and the symbol set.
Checking the Font Lists for Available Fonts 7-15 7 Appendix T ypeface Samples Standard Scalable Fonts (PCL) Courier CG Times CG Times Bold CG Times Italic CG Times Bold Italic CG Omega CG Omega Bold C.
Checking the Font Lists for Available Fonts 7-16 7 Appendix Marigold Alber tus Medium Alber tus Extra Bold Arial Arial Bold Arial Italic Arial Bold Italic Times New Times New Bold Times New Italic Tim.
Checking the Font Lists for Available Fonts 7-17 7 Appendix ITC A v ant Garde Gothic Demi Oblique ITC Bookman Light ITC Bookman Demi ITC Bookman Light Italic ITC Bookman Demi Italic New Century School.
Checking the Font Lists for Available Fonts 7-18 7 Appendix Bitmapped Fonts (PCL) OCR Code Scalable Fonts (PCL) Line Printer Line Printer Line Printer Line Printer Line Printer Line Printer Line Print.
Checking the Font Lists for Available Fonts 7-19 7 Appendix PS Fonts Alber tusMT Alber tusMT Italic Alber tusMT Light AntiqueOlive Roman AntiqueOliveCE Roman AntiqueOlive Italic AntiqueOliveCE Italic .
Checking the Font Lists for Available Fonts 7-20 7 Appendix A v antGardeCE DemiOblique Bodoni BodoniCE Bodoni Italic BodoniCE Italic Bodoni Bold BodoniCE Bold Bodoni BoldItalic BodoniCE BoldItalic Bod.
Checking the Font Lists for Available Fonts 7-21 7 Appendix Clarendon Bold ClarendonCE Bold CooperBlack CooperBlack Italic Copper plate Thir tyT woBC Copper plate Thir tyThreeBC Coronet Regular Corone.
Checking the Font Lists for Available Fonts 7-22 7 Appendix GillSans Italic GillSansCE Italic GillSans Bold GillSansCE Bold GillSans BoldItalic GillSansCE BoldItalic GillSans Condensed GillSansCE Cond.
Checking the Font Lists for Available Fonts 7-23 7 Appendix HelveticaCE BoldOb lique Helvetica Condensed HelveticaCE Cond Helvetica Condensed Ob lique HelveticaCE CondOb l Helvetica Condensed Bold Hel.
Checking the Font Lists for Available Fonts 7-24 7 Appendix JoannaMT Italic JoannaMTCE Italic JoannaMT Bold JoannaMTCE Bold JoannaMT BoldItalic JoannaMTCE BoldItalic LetterGothic LetterGothicCE Letter.
Checking the Font Lists for Available Fonts 7-25 7 Appendix NewCenturySchlbk Italic NewCenturySchlbkCE Italic NewCenturySchlbk Bold NewCenturySchlbkCE Bold NewCenturySchlbk BoldItalic NewCenturySchlbk.
Checking the Font Lists for Available Fonts 7-26 7 Appendix StempelGaramondCE Italic StempelGaramond Bold StempelGaramondCE Bold StempelGaramond BoldItalic StempelGaramondCE BoldItalic Symbol T affy T.
Checking the Font Lists for Available Fonts 7-27 7 Appendix UniversCE Bold Univers BoldOb lique UniversCE BoldOb lique Univers Light UniversCE Light Univers LightOb lique UniversCE LightOb lique Unive.
Checking the Font Lists for Available Fonts 7-28 7 Appendix Symbol Sets ASCII DeskT op.
Checking the Font Lists for Available Fonts 7-29 7 Appendix ISO 8859-1 Latin 1 ISO 8859-10 Latin 6.
Checking the Font Lists for Available Fonts 7-30 7 Appendix ISO 8859-2 Latin 2 ISO 8859-9 Latin 5.
Checking the Font Lists for Available Fonts 7-31 7 Appendix ISO French ISO German.
Checking the Font Lists for Available Fonts 7-32 7 Appendix ISO Italian ISO Norwegian.
Checking the Font Lists for Available Fonts 7-33 7 Appendix ISO Spanish ISO Swedish.
Checking the Font Lists for Available Fonts 7-34 7 Appendix ISO United Kingdom Legal.
Checking the Font Lists for Available Fonts 7-35 7 Appendix Math-8 MC T ext.
Checking the Font Lists for Available Fonts 7-36 7 Appendix Microsoft Publishing PC-1004.
Checking the Font Lists for Available Fonts 7-37 7 Appendix PC-775 PC-8.
Checking the Font Lists for Available Fonts 7-38 7 Appendix PC-8 D/N PC-850.
Checking the Font Lists for Available Fonts 7-39 7 Appendix PC-852 PC-T urkish.
Checking the Font Lists for Available Fonts 7-40 7 Appendix Pi Font PS Math.
Checking the Font Lists for Available Fonts 7-41 7 Appendix PS T ext Roman-8.
Checking the Font Lists for Available Fonts 7-42 7 Appendix Symbol Ventura International.
Checking the Font Lists for Available Fonts 7-43 7 Appendix Ventura Math Ventura US.
Checking the Font Lists for Available Fonts 7-44 7 Appendix Windows 3.0 Latin 1 Windows 3.1 Latin 1.
Checking the Font Lists for Available Fonts 7-45 7 Appendix Windows 3.1 Latin 2 Windows 3.1 Latin 5.
Checking the Font Lists for Available Fonts 7-46 7 Appendix Windows Baltic Wingdings.
Checking the Font Lists for Available Fonts 7-47 7 Appendix Unicode OCR-A.
Checking the Font Lists for Available Fonts 7-48 7 Appendix OCR-B Dingbats.
Checking the Font Lists for Available Fonts 7-49 7 Appendix ISO Latin 9 PC-8 Greek.
Checking the Font Lists for Available Fonts 7-50 7 Appendix PC-858 PC-860.
Checking the Font Lists for Available Fonts 7-51 7 Appendix PC-865 Roman 9.
Configuration Page Samples 7-52 7 Appendix Configuration Page Samples PCL Configuration Page PS Configuration Page a b c d e g f a b c d e f h.
Configuration Page Samples 7-53 7 Appendix The Configuration Page includes the following infor mation: IMPORTANT These sa mples are on ly avai labl e for the PCL or PS Printer . a Hardware Configuration This section displays the hardware config uration of the machine, including any option s that have been installed.
RGB/CMYK Test Page Samples 7-54 7 Appendix RGB/CMYK T est Page Samples RGB Test Page a b CMYK Test Page c d.
RGB/CMYK Test Page Samples 7-55 7 Appendix The RGB/CMYK Test Page includ es the following information: IMPORTANT These sa mples are on ly avai labl e for the PS Pri nter. a RGB Output Test Sample An output color sample, based on the RGB color related settings specified on the touch panel display.
Color Chart Samples 7-56 7 Appendix Color Chart Samples RGB Color Chart a b CMYK Color Chart c d.
Color Chart Samples 7-57 7 Appendix The Color Chart includes the following information: IMPORTANT These sa mples are on ly avai labl e for the PS Pri nter.
Specifications 7-58 7 Appendix Specifications Specifications are subject to change without notice for product improvement or future release. Software Specifications * 1 Only available for the PCL or PS Printer. * 2 Only available for the PS Prin ter. * 3 If you are using 12_5/8" x 17_11/16" size paper, 3/10 " (7.
Index 7-59 7 Appendix Index Numerics 2-Sided, 5- 17, 5-25, 5-33 2-Sided Printing, 3-15, 3-21 A Accessing the Printer Settings Menu, 1-12 Accessing the Report Settings Menu, 1-16 Advanced Smoothing Direct Printing from the Remote UI (PDF1.5), 5-11 PCL Settings, 3-64 PDF1.
Index 7-60 7 Appendix PDF1.5 Settings, 3-92 PS Settings, 3-76 Compressed Image Output, 3-44 Configuration Page (PCL), 1-16, 4-3 Configuration Page (PS), 1-16, 4-4 Control Command, 1-2 Copies, 3- 15, 5.
Index 7-61 7 Appendix Form Feeding Print Data, 2-2 1 Form Li nes, 3-54 Full Color, 3-43 G Gamma, 3-51, 3-64, 3-82 , 3-85 Gradation, 3-44, 3-46, 3-59 , 3-75, 3-81, 3-96 Gradation Settings, 3-44 Graphics, 3-44, 3-46, 3-59, 3-62, 3-75, 3-96 Gray Compensation Imaging Settings, 3-84 PCL Settings, 3-62 PDF1.
Index 7-62 7 Appendix M Magenta, 3-17 Manual Feed, 5-16 Margin, 3-22, 3-35, 3-39, 6-16 Matching Method Direct Printing from th e Remote UI (Imaging), 5-35 Direct Printing from the Remote UI (PDF1.5), 5-14 Imaging Settings, 3-84 PCL Settings, 3-61 PDF1.
Index 7-63 7 Appendix Pitch, 3-54, 7-2, 7-4, 7-14 Plain Paper, 3-16 Point Size, 3-54, 7-2, 7-4, 7-14 Portrait, 3-53 PostScript Emulation Mode, 1-3 Pre-punched, 3-16, 3-34 Print After Completing RIP, 3.
Index 7-64 7 Appendix Settings Menu, 3-5, 3-15 Show Warnings, 3-80, 5-33 Skipping an Error During Printing, 2-25 Smooth, 3- 44 Software Specifications, 7-58 Spacing, 7-14 Specifications, 7-58 Speed Pr.
.
USRM1-2835-00 CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan CANON U.S.A., INC. One Canon Plaza, Lake Success, NY 11042, U.S.A. CANON CANADA INC. 6390 Dixie Road Mississauga, Ontario L5T 1P7, Canada CANON EUROPA N.V. Bovenkerkerweg 59-61 1185 XB Amstelveen, The Netherlands (See http://www.
Ein wichtiger Punkt beim Kauf des Geräts Canon C3480 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Canon C3480 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Canon C3480 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Canon C3480 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Canon C3480 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Canon C3480 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Canon C3480 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Canon C3480. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Canon C3480 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
