Benutzeranleitung / Produktwartung INTEL PCM-9587 des Produzenten Advantech
Zur Seite of 82
User Manual PCM-9587 Onboard Intel® Celeron M EBX SBC with Audio, VGA, LCD, SA T A.
PCM-9587 User Man ual ii Copyright The document ation and the sof tware included with th is product are cop yrighted 2008 by Advantech Co., Ltd. All r ights are reserv ed. Advantech Co., Ltd. rese rves the right to make improvements in the product s descr ibed in this manual at any time without notice.
iii PCM-9587 User Manual P a c k i n g L i s t Before you begin installing you r card, please make sure that the following materials have been shipped: •1 PCM-9587 all-in-one single board comput.
PCM-9587 User Man ual iv Declaration of Conformity FCC Class A This device complies with the requirement s in part 15 of the FCC rules: Operation is subject to the following two conditions: 1.
v PCM-9587 User Manual Content s Chapter 1 General Information ............................ 1 1.1 Introduction ....... ....................... .......................... ...................... ................. 2 1.2 Features ................ ........
PCM-9587 User Man ual vi 2.20 USB connectors (CN18, CN20) ...................... .......................... ............... 16 Table 2.8: CN18: USB port 3/4 ........ ............................. ............ 16 Table 2.9: CN20: USB POR T 1/2 ........
vii PCM-9587 User Manual Chapter 6 Audio Setup ...................... ................. 35 6.1 Introduction ....... ....................... ....................... ......................... ............... 36 6.2 Driver installation ............ .....
PCM-9587 User Man ual viii B.16 Printer Port Connector (CN 16).......... .......................... .......................... .. 57 Table B.16:Printer Port Connector (CN16) ........................ ......... 57 B.17 USB Connector (CN18, 20) .........
Chapter 1 1 General Information This chapter gives background information on the PCM-9587. Sections include: Introduction Features Specifications Board layout and dimensions.
PCM-9587 User Man ual 2 1.1 Introduction The PCM-9587 series is a EBX SBC (Single Board Com puter) designed with the powerful Intel Celeron M processor , and Intel 852GM and 6300ESB chipsets, which supports Dyna mic Video Memory T echnology For maximum performance.
3 PCM-9587 User Manual Chapter 1 General Information W atchdog timer : Winbond W83627, 255 levels timer interval, setup by sof t- ware USB : Four USB 2.
PCM-9587 User Man ual 4 1.4 Board layout: dimensions Figure 1.1 Board layout: dimensions (com ponent side) Figure 1.2 Board layout: dimensions (solder sid e).
Chapter 2 2 Installation This chapter explains the setup procedures of PCM-9587 hard- ware, including instructions on setting jumpers and connecting peripherals, switches and indica- tors. Be sure to read all safety pre- cautions before you begin the installation procedure.
PCM-9587 User Man ual 6 2.1 Jumpers The PCM-9587 has a number of ju mpers that allow you to confi gure your system to suit your application. The ta ble below lists the fun ctions of the various jumpers.
7 PCM-9587 User Manual Chapter 2 Installation T able 2.5: J5: COM2 RS 232/422/485 Select PINS RS-232 RS-422 RS-485 1,2 Open Open Close 3,4 Open Clos e Open 5,6 Close Open Open 7,9 Close Open Open 8,10.
PCM-9587 User Man ual 8 2.2 Connectors On-board connectors link the PCM-9587 to external de vices such as hard disk drives, a keyboard, or floppy drives.
9 PCM-9587 User Manual Chapter 2 Installation 2.3 Locating jumpers and Connectors Figure 2.1 Jumper & Connector (compone nt side) Figure 2.2 Jumper & Connector (solder s ide).
PCM-9587 User Man ual 10 2.4 Setting Jumpers Y ou may configure your card to match the needs of your application by setting jump- ers. A jumper is a met al bridge used to close an electric circuit. It consists of two metal pins and a small met al clip (often prot ected by a plastic cover) that slides over the pins to connect them.
11 PCM-9587 User Manual Chapter 2 Installation 2.6 Inst alling DIMMs The procedure for installing DIMMs is descr ibed belo w . Please follow these step s carefully . The number of pin s are dif ferent on either side of the breaks, so the module can only fit in one way .
PCM-9587 User Man ual 12 2.9 Floppy drive connector (CN14) Y ou can attach up to two floppy drives to the PCM-9587’ s on-board controller . This is useful with 34 pin dual FDD cable (p art no:1701340603). Y ou can use any combination of 5.25”(360 KB and 1.
13 PCM-9587 User Manual Chapter 2 Installation 2.12 Front Panel Connector (CN22) Next, you may want to inst all external sw itches to monitor and control the PCM-95 87. These features are optional: inst all them only if you need them. The Front Panel con- nector (CN22) is a 14-pin male, dual in-line header .
PCM-9587 User Man ual 14 2.15 Audio AC'97 Link interfaces (CN4) The PCM-9587 is equipped with a high quality audio interface , which provides 16-bit CD-quality recording and playback as well as OPL3 comp atible FM music. It is sup- ported by all major operating systems and is completely comp atible with Sound Blaster Pro.
15 PCM-9587 User Manual Chapter 2 Installation 2.17.3 DVI LCD p anel connector(CN9) Digital V isual Interface (DVI) is the standard interface for high-performance connec- tion between PCs and Flat Panel Displays, Digit al CRT displays, Projectors, and HDTV .
PCM-9587 User Man ual 16 2.20 USB connectors (CN18,CN20) The PCM-9587 board provides up to four USB (Universal Serial Bus) 2.0 ports. T his gives complete Plug and Play , and hot attach /detach for up to 127 external devices. The USB interfaces comply with USB specification Rev .
17 PCM-9587 User Manual Chapter 2 Installation 2.26 System F AN connector (CN13) The board supports one system housing cool ing fan con nector on the motherboard.
PCM-9587 User Man ual 18.
Chapter 3 3 Software Configuration This chapter details the software configuration in formation. It shows you how to configure the card to match your application requirements. The AWARD Sys- tem BIOS is cove red in Chapter 4. Sections include: Introduction Connections for standard LCDs Ethernet interface configura- tion.
PCM-9587 User Man ual 20 3.1 Introduction The PCM-9587 system BIOS and cu stom drivers are located in a 512 Kbyte, Flash ROM device, designated U6. A single Flash chip holds the system BIOS, VGA BIOS and network Boot ROM image. The displa y can b e configured via CMOS settings.
Chapter 4 4 Award BIOS Setup This chapter describes how to set BIOS configuration data..
PCM-9587 User Man ual 22 4.1 System test and initialization These routines test and initialize board hardware. If the ro utines encounter an error during the test s, you will either hear a few short beep s or see an error message on the screen. There are two kinds of errors: fat al and non-fatal.
23 PCM-9587 User Manual Chapter 4 Award BIOS Setup 4.2.2 Stand ar d C MO S Features setup When you choose the S tandard CMOS Features op tion from the Initial Setup Scre en menu, the screen shown below is display ed. This standard Setup Menu allows users to configure system components such as da te, time, hard disk drive, floppy drive and display .
PCM-9587 User Man ual 24 4.2.4 Advanced Chip se t Features setup By choosing the Advanced Chip set Features option from the Initial Setup Screen menu, the screen below is displayed. Thi s sample screen contains the ma nufac- turer ’ s default values for the PCM- 9587 Series.
25 PCM-9587 User Manual Chapter 4 Award BIOS Setup 4.2.6 Power Management Set up By choosing the Power Management Setup option fr om the Initial Setup Scre en menu, the screen below is displayed. Th is sample screen cont ains the manufac- turer ’s default values for the PCM-9587 Series.
PCM-9587 User Man ual 26 4.2.8 PC Health St atus The PC Health S tatus option displays information such as CPU and mothe rboard temperatures, fan speeds, and core volt age.
27 PCM-9587 User Manual Chapter 4 Award BIOS Setup 4.2.10 Load Optimized Default s Figure 4.10 Load Optimized Default s Load Optimized Defaults loads the default sy stem values directly from ROM.
PCM-9587 User Man ual 28 T o Change Password 1. Choose the Set Password option from the CMOS Setup Utility main menu and press <Enter>. 2. When you see “Enter Password,” enter the e xisting password and press <Enter>. 3. Y ou will see “Confirm Password” T ype it again, and press <Enter>.
Chapter 5 5 PCI Graphic Sections include: Introduction Installation of PCI Graphic driv- ers - for Windows 2000/XP Further information.
PCM-9587 User Man ual 30 5.1 Introduction The PCM-9587 has an onboard PCI/AGP flat p anel/VGA interface. The specifications and features are described as follows: 5.1.1 Chip set The PCM-9587 uses a Intel Mont a ra-GM/GM+ GM CH chip set for its graphic controller .
31 PCM-9587 User Manual Chapter 5 PCI Graphic.
PCM-9587 User Man ual 32 5.2 Inst allation of the PCI Graphic driver Complete the following steps to inst all the PCI graphic driver . Follow the procedures in the flow chart that apply to the operating syst em that you ar e using within your PCM-9587.
33 PCM-9587 User Manual Chapter 5 PCI Graphic.
PCM-9587 User Man ual 34 5.3 Further Information For further information about the AGP/VGA installa tion in your PCM-9587, including driver updates, troubleshooting g uides and F AQ lists, visit the following web resources: Advantech websites: www .advantech.
Chapter 6 6 Audio Setup The PCM-9587 is equipped with an audio interface that records and plays back CD-quali ty audio. This chapter provides instructions for installing the software drivers included on the au dio driver dis- kettes.
PCM-9587 User Man ual 36 6.1 Introduction The PCM-9587's on-board audio in terface provides high-quality stereo soun d and FM music synthesis (ESFM) by using the Intel 6300ESB audio controller . The audio interface can record, compress, and play back voice, sound, and mu sic with built-in mixer control.
37 PCM-9587 User Manual Chapter 6 Audio Setup 2. In the Hardware Update Wi zard window , click "Next"..
PCM-9587 User Man ual 38 3. In the following Hardware Update Wizard windo w , click "Finish" for Windows to complete audio driver installatio n.
Chapter 7 7 LAN Configuration Sections include: Introduction Features Installation of Ethernet Driver for - Windows 2000 Drivers Setup Steps - Windows NT Drivers Setup Steps - Windows Wake.
PCM-9587 User Man ual 40 7.1 Introduction The PCM-9587 is equipped with a high-performance 32-b i t Ethernet chipset which is fully compliant with IEEE 802.3 100 Mbp s CSMA/CD standards. It is supported by major network operating systems. It is a lso both 100Base-T and 10Base -T compati- ble.
41 PCM-9587 User Manual Chapter 7 LAN Configuration 2. Click “Add new hardware wizard” and prep are to install networkfunction.
PCM-9587 User Man ual 42 3. Choose Hardware Device “Ethernet Controller”..
43 PCM-9587 User Manual Chapter 7 LAN Configuration.
PCM-9587 User Man ual 44 4. Insert the CD into D: drive a. Fill in the Find the LAN chipse t folder at the directory of PCM-9587 win2000 folder from CD ROM drive b. Click “OK”. 5. Choose the "Intel(R) GD82559ER PCI Adapte r" item. Click “Next”.
45 PCM-9587 User Manual Chapter 7 LAN Configuration.
PCM-9587 User Man ual 46 6. a. Make sure the configurations of relative items are set correctly b. Click “Next” button 7. Click “Finish” to close this wizard. 7.4 Further information Intel website: www .intel.com Advantech websites: www .advantech.
Appendix A A Programming the GPIO and Watchdog Timer The PCM-9587 is equipped with a watchdog timer that resets the CPU or generates an interrupt if processing comes to a standstill for any reason. This feature ensures system reliability in industrial standalone or unmanned environments.
PCM-9587 User Man ual 48 A.1 Supported GPIO Register Below are detailed descriptions of the GPIO addresses and a programming sample . A.1.1 GPIO Registers CRF0 (GP10-GP17 I/O selection register . Default 0xFF) When set to a '1', respective GPIO port is pro grammed as an input port.
49 PCM-9587 User Manual Appendix A Programming the GPIO and Watchdog Timer MOV AL,F2H; OUT DX,AL MOV DX,2FH MOV AL,00H;Set GPIO is normal not inverter OUT DX,AL; MOV DX,2EH MOV AL,F1H OUT DX,AL MOV DX.
PCM-9587 User Man ual 50 A.2 W atchdog programming Bellow is a sample of programming cod e for controlling the W atchdog Timer function. ---------------------------------------------------------------.
Appendix B B Pin Assignments This appendix provides special- ized information regarding:.
PCM-9587 User Man ual 52 B.1 LCD Backlight Connector (CN1) B.2 TV Out Connector (CN2) (TV out optional by request) B.3 CD-IN Connector (CN3) T able B.1: LCD Backli ght Connector (CN1) Pin Signal 1 +12 V 2G N D 3 L VDS_BKL T EN 4 VBR 5+ 5 V T able B.
53 PCM-9587 User Manual Appendix B Pin Assignments B.4 Audio Output Connector (CN4) B.5 Power input Connector (CN5) B.6 -12V and -5V Connector (CN6) T able B.
PCM-9587 User Man ual 54 B.7 VGA Connector (CN7) B.8 L VDS Connector (CN8) T able B.7: VGA Connector (CN7) Pin Signal Pin Signal 1 VGA_R 2 VGA_VCC 3V G A _ G 4 G N D 5V G A _ B 6 N C 7 NC 8 VGA_DA T A 9 GND 10 VGA_HS 11 G N D 1 2 V G A _ V S 13 GND 14 VGA_CLK 15 GND 16 NC T able B.
55 PCM-9587 User Manual Appendix B Pin Assignments B.9 DVI Connector (CN9) B.10 Gigabit LAN Connector (CN10 Optional) B.1 1 10/100M LAN Connector (CN1 1) T able B.
PCM-9587 User Man ual 56 B.12 Gigabit LAN LED Connector (CN12 Optional) B.13 System F AN Connector (CN13) B.14 Floppy Disk Drive Connector (CN14) T able B.12: Gigabit L AN LED Connector (CN12) Pin Signal Pin Signal 1 VCC_LAN25 2 GND 3L I N K 4 A C T 5 LINK100 6 LINK1000 7 NC 8 NC T able B.
57 PCM-9587 User Manual Appendix B Pin Assignments B.15 Primary HDD Connector (CN15) B.16 Printer Port Connector (CN16) T able B.15: Primary HDD Connector (CN15) Pin Signal Pin Signal 1 Reset 2 GND 3D.
PCM-9587 User Man ual 58 B.17 USB Connector (CN18,20) B.18 DIO Connector (CN19) T able B.17: USB Connector (CN18,20) Pin Signal Pin Signal 1+ 5 V 2 + 5 V 3 UV0-/2-/4- 4 UV1-/3-/5- 5 UV0+/2+/4+ 6 UV1+/3+/5 + 7 GND 8 GND 9G N D 1 0 N C T able B.
59 PCM-9587 User Manual Appendix B Pin Assignments B.19 COM Port Connector (CN21) T able B.19: COM Port Connector (CN21) Pin Signal Pin Signal 1 COM1 DCD 2 COM1 DSR 3 COM1 RX 4 COM1 RTS 5 COM1 TX 6 CO.
PCM-9587 User Man ual 60 B.20 Front Panel Connector (CN22) B.21 SA T A Connector 1 (CN23) T able B.20: Front panel Connector (CN22) Pin Signal Pin Signal 1 HDD LED+ 2 HDD LED- 3 Power LED+ 4 GND 5 Suspend LED 6 GND 7 LAN ACT+ 8 LAN ACT - 9 LAN Link+ 10 LAN Link- 1 1 VCC_DUAL 12 A TX Power Button 13 GND 14 Reset T able B.
61 PCM-9587 User Manual Appendix B Pin Assignments B.22 SA T A Connector 2 (CN24) B.23 CPU F AN Connector (CN25) B.24 Extension SMBUS Connector (CN26) T able B.22: SA T A Co nnector 2 (CN24) Pin Signal 1G N D 2T X 1 3T X 1 # 4G N D 5R X 1 # 6R X 1 7G N D T able B.
PCM-9587 User Man ual 62 B.25 Keyboard and PS/2 Mouse Connector (CN27) B.26 CPU F AN Connector (wafer box)(Optional)(CN28) T able B.25: Keyboard a nd Mouse Connector (CN27) Pin Signal 1 KB CLOCK 2 KB DA T A 3M S C L O C K 4G N D 5+ 5 V 6M S D A T A T able B.
63 PCM-9587 User Manual Appendix B Pin Assignments B.27 Mini PCI Connector(CN29) B.28 Comp actFlash Card Connector (CN30) T able B.27: Mini PC I Connector (CN29) Pin Signal Pin Signal 1 TIP Key 2 RING.
PCM-9587 User Man ual 64.
Appendix C C System Assignments This Appendix contains informa- tion of a deta iled nature. It includes: System I/O ports 1st MB memory map DMA channel assignments Interrupt assignment.
PCM-9587 User Man ual 66 C.1 System I/O Port s * PNP audio I/O map range from 220 ~ 250H (16 bytes) MPU-401 select from 300 ~ 330H (2 bytes) T able C.1: System I/O Ports Addr .
67 PCM-9587 User Manual Appendix C System Assignments C.2 1st MB memory map * If Ethernet boot ROM is disabled (Ethernet ROM occu pies about 16 KB) * E0000 - EFFFF is reserved f or BIOS POST C.3 DMA channel assignment s * Audio DMA select 1, 3, or 5 ** Parallel port DMA select 1 (LP T2) or 3 (LP T1) T able C.
PCM-9587 User Man ual 68 C.4 Interrupt assignment s * Ethernet interface IRQ select: 9, 1 1, 15 * PNP audio IRQ select: 9, 1 1, 15 * PNP USB IRQ select: 9, 1 1, 15 * PNP ACPI IRQ select: 9, 1 1, 15 T able C.
Appendix D D Optional Extras for the PCM-9587.
PCM-9587 User Man ual 70 The PCM-9587 requires severa l cables for normal operation. Y ou can make them yourself or purchase an optional cab le ki t assembly , which includes the following D.1 PCM-10586-6200E Cable kit for PCM-9587 T able D.1: PCM-10586- 6200E wiring kit 9587 Part No.
Appendix E E Mechanical Drawings.
PCM-9587 User Man ual 72 E.1 Mechanical Drawings Figure E.1 PCM-9587 Mechanical Drawing (component side).
73 PCM-9587 User Manual Appendix E Mechanical Drawings Figure E.2 PCM-9587 Mechanical Drawing (solder s ide).
www .advantech.com Please verify specifications be fore quoting. This guide is intended for reference purposes only . All product specifications are subj ect to change without notice.
Ein wichtiger Punkt beim Kauf des Geräts Advantech INTEL PCM-9587 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Advantech INTEL PCM-9587 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Advantech INTEL PCM-9587 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Advantech INTEL PCM-9587 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Advantech INTEL PCM-9587 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Advantech INTEL PCM-9587 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Advantech INTEL PCM-9587 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Advantech INTEL PCM-9587. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Advantech INTEL PCM-9587 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
