Benutzeranleitung / Produktwartung CP-150 des Produzenten Advantech
Zur Seite of 54
Advantech CompactPCI™ CP-150 6U-6-slot backplane portable enclosure for CompactPCI™ Modular Industrial Computer.
CP-150 User Manual --- Page II Copyright Notice This document is copyri ghted, 2004. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time with out notice.
CP-150 User Manual --- Page III Product warranty Advantech warrants to you, the origi nal purchaser, that each of i ts products will be free from defects in materi als and workma nshi p for one year from the date of purchase.
CP-150 User Manual --- Page IV Important Safety Information SAFETY INSTRUCTIONS 1. Please read these safe ty instructions carefully. 2. Please keep this User‘s Manual for later reference. 3. Please disconnect this equipment from AC o utlet before cleaning.
CP-150 User Manual --- P age V 16. Never open the equipment . For safety reason, qualified service personnel should only open the equipment. 17. CAUTION: The computer is provided wi th a battery-powered real-ti me clock circuit. There is a danger of explosion if battery is incorrectly replaced.
CP-150 User Manual --- Page VI Packing List Before installation, ensure that the followin g materials have been received: • One CP-150 CompactPCI™ en closure with backplane • One box of accessor.
CP-150 User Manual --- Page VII Contents 1. General Information.. .......................... ................ 1 1.1 Introduction ......... ................ ................ ................ ................ ........ 2 1.2 Features ....................
CP-150 User Manual --- Page VIII 3.5 Connector and jump er locations..... .......... ......... .......... ........ .......... ...24 3.5.1 ATX Power Connector (ATX1) .................................................... .25 3.5.2 Power Switch ..........
CP-150 User Manual --- Page IX Figures Figure 1-1: CP-150 d imensions .......................... .................. .................. ................. 4 Figure 1-2: Appearance of CP-150..... ............. ......... ......... ........... ......... ..
CP-150 User Manual --- P age 1 1 General Information.
CP-150 User Manual --- P age 2 1.1 Introduction CP-150 is a robust, p ortable enclosure w ith 15” touch LCD m onitor. With a field-tested rugged, high impact design , the CP-150 provides many flexibl e and powerful features. Compliant with CompactPCI specification, this all-in-one model is the most p ragmatic solution for any mobile application.
CP-150 User Manual --- P age 3 1.2 Features • Portable enclosure for 6U CompactPCI ® boards • 6-slot 6U CompactPCI ® backplane • 15” Touch LCD mo nitor built-in • Supports computer telephony specification ( PICMG 2.5) • Built-in slim CD-ROM, FDD and Keyboard • Supports one 3.
CP-150 User Manual --- P age 4 Factor Correction). • Output (per module) : 400W, +3.3V,and +5V total output power shall not exceed 180W • Maximum load: +3.3V @ 28A, +5V @ 30A, +12 V @ 18A, -5V @0.5A, -12V @ 0.8A, +5Vsb @ 2.0 A • Minimum load: +3.
CP-150 User Manual --- P age 5 2 Installation.
CP-150 User Manual --- P age 6 2.1 Initial Inspection We have carefully inspected the CP-150 mechanically and electrically before shipping. It should be free of marks and scr atches and in perfect working order upon receipt. As you unpack the CP-150, check it for signs of shipping dama ge (damaged box, scratches, dents , etc.
CP-150 User Manual --- P age 7 Figure 2-2: Right vie w of Cp-150 2.3 Computer Operation 2.3.1 Keyboard and T ouch Pad How to release There are two release buttons locate d on the top-left and top-right of the keyboard. When the buttons are pressed, the keyboard is disengaged from the portable enclosure and may be released.
CP-150 User Manual --- P age 8 How to pack away the keyboard Follow the same proc edure to pack the ke yboard back into the portab le enclosure in a reverse manner. Note that the keyboard cable should be pu t back into its proper lodging loca tion. Make sure the two lockin g mechanisms are properly secured after it is put back.
CP-150 User Manual --- P age 9 the left/right buttons on a mouse. You may also tap on the touch pad to indicate a left click. 2.3.2 Side Panel Depending on the system board and your a dd-on cards, you may also have other ports such as th e Ethernet and Audio ports.
CP-150 User Manual --- Page 10 Figure 2-6 2.3.4 Power Supply The CP-150 come s with a PS/2 power supply with full-range auto-sen sing Active PFC, and 400W output. 2.3.5 Hooking up ext ernal monitor The external CRT monitor / Proj ector can be hooked up via the side panel VGA (15pin) port while the system is off.
CP-150 User Manual --- Page 11 2.3.6 Additional Bott om Cooling Fan An additional cooling fan can be foun d on the bottom of the case. This bottom fan is used to create ai rflow inside t he slots. Th is increases the efficiency of the controller and the othe r cards.
CP-150 User Manual --- Page 12 computer stores and are usually ready for use if pre-forma tted. You may insert the disk into t he drive with the disk face up. During access to the floppy, the lights on th e floppy disk drive will light up, indicating that the disk is currently being read from or writt en to.
CP-150 User Manual --- Page 13 Figure 2-9 2.3.10 Removable C ooling Fan The cooling fan on the right sid e can be easily removed. You don’t need to take off the back cover to re place the fan. Please see Chapter 5 for details. Figure 2-10 2.4 Installation Procedures 2.
CP-150 User Manual --- Page 14 slot is marked by a triangle arou nd th e slot number (1). Please refer to the backplane user's manual. The insert/eject han dles on CompactPCI™ cards help users to inst all and remove the cards easily and safely.
CP-150 User Manual --- Page 15 2.4.3 Installing a 3.5” Hard Disk Drive Follow this procedure to install 3.5" hard disk drives in the CP-150: 1. Loosen the screws and remove the mobile rack. 2. Mount the HDD on t he mobile rack, and fasten with screws.
CP-150 User Manual --- Page 16 Unscrew the upper cover of slot unit Unscrew Unscrew.
CP-150 User Manual --- Page 17 Pull the slot unit away Figure 2-12 2.4.5 Remove Drive Bay The whole 6U PXI slot unit Figure 2-13.
CP-150 User Manual --- Page 18 Unscrew the fixed cover Figure 2-14 Unscrew the CD-ROM Unscrew Figure 2-15.
CP-150 User Manual --- Page 19 Remove the CD-ROM Figure 2-16 Unscrew the FDD Unscrew Figure 2-17.
CP-150 User Manual --- Page 20 Remove the FDD Figure 2-18 2.4.6 Remove the side-cooling fan Unscrew the cooling fan Figure 2-19.
CP-150 User Manual --- Page 21 Remove the cooling fan Figure 2-20 2.4.7 Remove the Power Supply Unscrew & remove the side panel Fi gure 2-21.
CP-150 User Manual --- Page 22 Remove the power supply with cover Fi gure 2-22.
CP-150 User Manual --- Page 23 3 Backplane.
CP-150 User Manual --- Page 24 3.1 General Information The backplane designed for the CP-150 is the MIC-3800. MIC-3800 has an H.110 CT bus and six CompactPCI™ slots. One slot is assigned to the CPU board and the other slots are for five peripher al boards.
CP-150 User Manual --- Page 25 the peripheral slots have lo gical numbers 2~5. The connect ors in logical slot 1 are designated as 1-P1, 1-P2, a nd 1-P3 from the bottom up. Nomenclature for connectors in the other sl ots is similar, such as 2-P1 and 2-P2.
CP-150 User Manual --- Page 26 CN8 CN6 CN1 1 2 System sl ot ID=A D31 3 45 6 ID=AD30 ID=AD29 ID=AD28 ID= AD27 Figure 3-1: MIC-3800 Backplane slot numbering 3.5 Connector and Jumper Locations The backplane provides connectors and jumpers for users to configure for specific application.
CP-150 User Manual --- Page 27 CN2 CN12 CN7 CN13 CN9 CN11 CN10 ATX1 JP1 JP2 JP3 JP4 JP5 JP6 JP9 JP10 Figure 3-2: The connector and jumper lo cations on the rea r side. (MIC-38 00) 3.5.1 ATX Power Connector (ATX1) This connector accepts one standard ATX powe r supply.
CP-150 User Manual --- Page 28 Appendix A Pin Assignments.
CP-150 User Manual --- Page 29 A.1 MIC-3800 System Slot P1 Connector Table A-1: MIC-3800 system slot P1 connector Pin Z A B C D E F 25 GND +5V REQ64# ENUM# +3.3V +5V GND 24 GND AD[1] +5V V(I/O) AD[0] ACK64# GND 23 GND +3.3V AD[4] AD[3] +5V AD[2] GND 22 GND AD[7] GND +3.
CP-150 User Manual --- Page 30 A.2 MIC-3800 System Slot P2 Connector Table A-2: MIC-3800 system slot P2 connector Pin Z A B C D E F 22 GND GA4 GA3 GA2 GA1 GA0 GND 21 GND NC GND RSV RSV RSV GND 20 GND .
CP-150 User Manual --- Page 31 A.3 MIC-3800 System Slots P3 Connector Table A-3: MIC-3800 system slot P3 connector Pin Z A B C D E F 19 GND N/C N/C N/C N/C N/C GND 18 GND N/C N/C N/C N/C N/C GND 17 GN.
CP-150 User Manual --- Page 32 A.4 MIC-3800 System Slot P4 Connector Table A-4: MIC-3800 system slot P4 connector Pin Z A B C D E F 25 GND N/C N/C N/C N/C N/C GND 24 GND N/C N/C N/C N/C N/C GND 23 GND.
CP-150 User Manual --- Page 33 A.5 MIC-3800 System Slot P5 Connector Table A-5: MIC-3800 system slot P5 connector Pin Z A B C D E F 22 GND N/C N/C N/C N/C N/C GND 21 GND N/C N/C N/C N/C N/C GND 20 GND.
CP-150 User Manual --- Page 34 A.6 MIC-3800 Peripheral Slot P1 Connector Table A-6: MIC-3800 p eripheral slot P1 conne ctor Pin Z A B C D E F 25 GND +5V REQ64# ENUM# +3.3V +5V GND 24 GND AD[1] +5V V(I/O) AD[0] ACK64# GND 23 GND +3.3V AD[4] AD[3] +5V AD[2] GND 22 GND AD[7] GND +3.
CP-150 User Manual --- Page 35 A.7 MIC-3800 Peripheral Slot P2 Connector Table A-7: MIC-3800 peripher al slot P2 connector Pin Z A B C D E F 22 GND GA4 GA3 GA2 GA1 GA0 GND 21 GND RSV RSV RSV RSV RSV G.
CP-150 User Manual --- Page 36 A.8 MIC-3800 Peripheral Slot P3 Connector Table A-8: MIC-3800 peripher al slot P3 connector Pin Z A B C D E F 19 GND N/C N/C N/C N/C N/C GND 18 GND N/C N/C N/C N/C N/C G.
CP-150 User Manual --- Page 37 A.9 MIC-3800 Peripheral Slot P4 Connector Table A-9: MIC-3800 peripheral slot P4 connector Pin Z A B C D E F 25 N/C SGA4 SGA3 SGA2 SGA1 SGA0 FGND 24 N/C GA4 GA3 GA2 GA1 .
CP-150 User Manual --- Page 38 A.10 MIC-3800 Peripheral Slot P5 Connector Table A-10: MIC-3800 peri pheral slot P5 connector Pin Z A B C D E F 19 GND N/C N/C N/C N/C N/C GND 18 GND N/C N/C N/C N/C N/C.
CP-150 User Manual --- Page 39 A.11 ATX Power Connector (ATX1) 1 11 20 10 Table A-11: ATX Power Connector Pin Signal Pin Signal 1 +3.3V 11 +3. 3V 2 +3.
CP-150 User Manual --- Page 40 A.12 IDE Interface Connect ors (CN8,CN12) Table A-12: IDE Interface C onnectors Pin Signal Pin Signal 1 RESET# 21 DMREQ 2 GND 22 GND 3 DD7 23 DIOW# 4 DD8 24 GND 5 DD6 25.
CP-150 User Manual --- Page 41 A.13 FDD Interface connector (CN6) Table A-13: FDD Interface Connector Pin Signal Pin Signal 1 +5V 14 STEP# 2 INDEX# 15 GND 3 +5V 16 WDA T A# 4 DS0# 17 GND 5 +5V 18 WGA TE# 6 DSKCHG# 19 GND 7 N/C 20 TRK0# 8 N/C 21 GND 9 N/C 22 WR TPRT 10 MTR0# 23 GND 11 N/C 24 RDA T A# 12 DIR# 25 GND 13 DRVEN0 26 HDSEL# A.
CP-150 User Manual --- Page 42 A.15 KEYBOARD Interface Connector (CN11) Table A-15: KEYBOARD Interface Connector Pin Signal 1 KBCLK 2 KBDA T A 3 N/C 4 GND 5 VCC A.16 MOUSE Interface Connector (CN9) Table A-16: MOUSE Interface Connector Pin Signal 1 MSCLK 2 MSDA T A 3 N/C 4 GND 5 VCC A.
CP-150 User Manual --- Page 43 A.18 USB Interface connector (CN7) Table A-18: USB Interface Conne ctor Pin Signal 1 USBVCC 2 D0- 3 D0+ 4 GND 5 N/C 6 N/C 7 N/C 8 N/C 9 N/C 10 N/C.
CP-150 User Manual --- Page 44 Appendix B Ordering Information.
CP-150 User Manual --- Page 45 • CP-150: CompactPCI™ portable enclosure with 6-slot H.110 CT backplane (MIC-3800), cooling fan modules, and 400W ATX power supply. Recommend 6U CompactPCI™ SBC: User can refer to the table below for a compatible SBC.
Ein wichtiger Punkt beim Kauf des Geräts Advantech CP-150 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Advantech CP-150 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Advantech CP-150 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Advantech CP-150 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Advantech CP-150 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Advantech CP-150 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Advantech CP-150 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Advantech CP-150. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Advantech CP-150 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
