Benutzeranleitung / Produktwartung 5260B054 des Produzenten Canon
Zur Seite of 404
E INSTRUCTION MANUAL E INSTRUCTION MANUAL The “Software Start Guide” is included at the end of this manual. C OP Y.
2 The EOS 5D Mark III is a high-perform ance, digital single-lens reflex camera featuring a fine-detail, fu ll-frame (approx. 36 x 24 mm) CMOS sensor with approx. 22.3 effective megapixels, DIGIC 5+, approx. 100% viewfinder coverage, high-precisi on and high-speed 61-point AF , approx.
3 Before starting, check that all t he following items have been included with your camera. If anything is missing, contact your dealer . * Battery Charger LC-E6 or LC-E6E is provi ded. (T he LC-E6E come s with a power cord.) Attach Eyecup Eg to th e viewfinder eyepiece.
4 Icons in this Manual < 6 > : Indicates the Main Dial. < 5 > : Indicates the Quick Control Dial. < 9 > : Indicates the Multi-controller . < 0 > : Indicates the Setting button. 0 , 9 , 7 , 8 : Indicates that the corresponding function remains active for 4 sec.
5 For first-time DSLR users, Chapters 1 and 2 explain the camera’ s basic operations and shooting procedures. Chapters Introduction 2 Getting St arted 27 Basic Shooting 63 Setting the AF and Drive M.
6 1 Introduction 2 Item Check List ......... ...................................... .................. ................ 3 Conventions Used in this Manual ............ ......................................... 4 Chapters ................. .............
7 Contents 2 3 4 Basic Shooting 63 A Fully Automatic Shooting (Scene Inte lligent Auto) ................... 64 A Full Auto Techniques (Scene Intell igent Auto) ........ ................. 67 Setting the AF and Drive Modes 69 f : Selecting the AF Mode .
8 Contents 5 6 Noise Reduction Settings ..... ........................................................ 143 Highlight Tone Priority ..... ............................................................. 146 Lens Peripheral Illu mination / Chromatic Aberration Correction .
9 Contents 7 8 9 Shooting with the LCD Monitor (Live View Shooting) 197 A Shooting with the LCD Monitor ............................. .................. 198 Shooting Function Settings .. .......................................... ............... 202 Menu Function Settings .
10 Contents 12 11 10 k Enjoying Movies ........... .......................................................... 259 k Playing Movies ............. .......................................................... 261 X Editing the Movie’s First and Last Scenes .
11 Contents 13 14 15 Customizing the Camera 313 Custom Functions ............. .......................................... .................. 314 Custom Function Settings .... .......................................... ............... 315 C.Fn1: Exposure .
12 Power Charging the battery Î p.28 Battery check Î p.35 Battery information check Î p.338 Power outlet Î p.342 Auto power off Î p.55 Card Format Î p.53 Select card Î p.1 16 Release shutter without card Î p.32 Lens Attaching/Det aching Î p.39 Zoom Î p.
13 Index to Features Chromatic aberration correction Î p.148 Color space Î p.158 Shooting Shooting mode Î p.24 HDR Î p.173 Multiple exposures Î p.177 Mirror lockup Î p.184 Depth-of-field preview Î p.165 Remote control Î p.186 Quick Control Î p.
14 Camera Care This camera is a precision instrument. Do not drop it or subject it to physical shock. The camera is not waterproof and ca nnot be used underwater . If you accidentally drop the camera into wa ter , promptly consult your nearest Canon Service Center .
15 Handling Precautions LCD Panel and LCD Monitor Although the LCD monito r is manufactured with very high precision technology with over 99.99% effective pixels, there may be a few dead pixels among the remaining 0.01% or less pixels . Dead pixels displaying only black or red, etc.
16 Quick Start Guide 1 Insert the battery (p.30) . T o charge the battery , see page 28. 2 Insert a card (p.31) . The camera-front side slot is for a CF card, and the camera-back side slot is for an SD card. 3 Atta ch the lens (p.39) . Align it with the red dot.
17 Quick Start Guide 6 While holding down the center of the Mode Dial, set it to < A > (Scene Intelligent Auto) (p.64) . All the necessary camera settings will be set automatically . 7 Focus the subject (p.44) . Look through the viewfinder and aim the viewfinder center over the subject.
18 Nomenclature Lens mount index (p.39) Grip (Battery compartment) DC coupler cord hole (p.342) Remote control sensor (p.186) Shutter button (p.44) Mode Dial (p.24) Mode Dial lock release button (p.45) Hot shoe (p.188) Flash-sync contacts Microphone (p.
19 Nomenclature < Y > External microphone IN terminal (p.235) < D > HDMI mini OUT terminal (p.268) < F > Remote control terminal (N3 type) (p.185) < D > PC terminal (p.189) < n > Headphone terminal (p.235) < q / C > Audio/video OUT/Digital terminal (p.
20 Nomenclature Tripod socket Battery compartment cover (p.30) Battery compartment cover release lever (p.30) < 9 > Multi-controller (p.47) Dioptric adjustment knob (p.43) Strap mount (p.27) Card slot cover (p.31) SD card slot (p.31) CF card slot (p.
21 Nomenclature LCD Panel The display will show only th e settings currently applied. < 0 > Monochrome shooting (p.131) AF mode (p.70) X One-Shot AF 9 AI Focus AF Z AI Servo AF 4 L Manual focus Drive mode (p.
22 Nomenclature < g > ISO speed (p.124) Metering mode (p.167) q Evaluative metering w Partial metering r Spot metering e Center-weighted average metering Image-recording quality (p.119) < h > AEB (p.170) < y > Flash exposure compensation (p.
23 Nomenclature Viewfinder Information The display will show only th e settings currently applied. < S > Single AF point < O > Spot AF (single point) (p.75) Area AF frame (p.73) < A > AE lock (p.171) / AEB in-progress (p.170) < D > Flash-ready (p.
24 Nomenclature Mode Dial T urn the Mode Dial while holding down the Mode Dial center (Mode Dial lock release button). A :Scene Intelligent Auto (p.64) F : Bulb (p.172) a : Manual exposure (p.166) f : Aperture-priority AE (p.164) s : Shutter-priority AE (p.
25 Nomenclature EF24-105mm f/4L IS USM lens Focus mode switch (p.39) Hood mount (p.41) 77 mm filter thread (front of lens) Zoom ring (p.40) Image Stabilizer switch (p.42) Lens mount index (p.39) Contacts (p.15) Distance scale Focusing ring (p.1 1 1, 214) Infrared index Zoom position index (p.
26 Nomenclature Battery Charger LC-E6 Charger for Battery Pack LP-E6 (p.28). Battery Charger LC-E6E Charger for Battery Pack LP-E6 (p.28). Battery pack slot Charge lamp Power plug IMPORT ANT SAFETY INSTRUCTIO NS-SA VE THESE INSTRUCTIONS. DANGER-TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULL Y FOLLOW THESE INSTRUCTIONS.
27 Getting Started This chapter explains preparatory step s before you start shooting and basic camera operations. Attaching the S trap Pass the end of the strap through the camera’s strap mount eyelet from the bottom. Then pass it through the strap’s buckle as shown in the illustration.
28 1 Remove the protective cover . Detach the protective cover provided with the battery . 2 Atta ch the battery . As shown in the illustration, attach the battery securely to the charger . T o detach the battery , follow the above procedure in reverse.
29 Charging the Battery Upon purchase, the batter y is not fully charged. Recharge the battery before using. Recharge the battery on th e day before or on the day it is to be used. Even during storage, a charged battery will gradually drain and lose its capacity .
30 Load a fully-charged Battery Pack LP-E6 into the camera. The camera’ s viewfinder becomes bright when a battery is installed, and darkens when the battery is removed. 1 Open the cover . Slide the lever as shown by the arrows and open the cover . 2 Insert the battery .
31 The camera can use a CF card and SD card. Images can be recorded when at least one card is installed in the camera. If a card is inserted in both slots, you can select which card to record images to or record the same im ages simultaneously on both cards (p.
32 Installing and Removing the Card 3 Close the cover . Close the cover and slide it in the direction shown by the arrows until it snaps shut. X When you set the power switch to < 1 > (p.34), the number of possible shots and the loa ded card(s) will be displayed on the LCD panel.
33 Installing and Removing the Card 1 Open the cover . Set the power switch to < 2 >. Make sure the access lamp is off, then open the cover . If [ Recording ... ] is displayed, close the cover . 2 Remove the card. T o remove the CF card, push the eject button.
34 If you turn on the power switch and the Date/Time/Zone setting screen appears, see page 36 to set the Date/T ime/Zone. < 1 > : The camera turns on. < 2 > : The camera is turned of f and does not operate. Set to this position when not using the camera.
35 Turning on the Power When the power switch is set to < 1 >, the battery level will be indicated in one of six levels. A blinking battery icon ( b ) indicates that the battery will be exhausted soon.
36 When you turn on the power for the first time or if the date/time has been reset, the Date/T ime/Zone setti ng screen will appear . Follow steps 3 to 6 to set the current date, time, and time zone. Note that the date/time appended to recorded images will be based on this date/time setting.
37 3 Setting the Date, Time, and Zone 4 Set the date and time. T urn the < 5 > dial to select the number . Press < 0 > so < r > is displayed. T urn the < 5 > dial to select the desired setting, then press < 0 > (Returns to < s >).
38 1 Display the menu screen. Press the < M > button to display the menu screen. 2 Under the [ 5 2] t ab, select [Language K ]. Press the < Q > button and select the [ 5 ] tab.
39 The camera is compatible with all Canon EF lenses. The camera cannot be used with EF-S lenses. 1 Remove the caps . Remove the rear lens cap and the body cap by turning them as shown by the arrows. 2 Atta ch the lens. Align the red dots on the lens and camera and turn the lens as shown by the arrow until it clicks in place.
40 Attaching and Detaching a Lens T o zoom, turn the zoom ring on the lens with your fingers. If you want to zoom, do it before focusing. T urning the zoom ring after achieving focus may throw off the focus slightly . While pressing the lens release button, turn the lens as shown by the arrow .
41 Attaching and Detaching a Lens When the dedicated EW-83H hood is att ached to the EF24-105mm f/4L IS USM lens, it blocks stray light and protects the front of the lens from snow , rain, dust, etc. Before storin g the lens in a bag, etc., you can attach the hood in reverse.
42 When you use the IS lens’ built-in Image S tabilizer , camera shake is corrected to obtain a sharper sho t. The procedure explained here is based on the EF24-105mm f/4L IS USM lens as an example. * IS stands for Image S tabilizer . 1 Set the IS switch to < 1 >.
43 T urn the dioptric adjustment knob. T urn the knob left or right so that the AF points in the viewfinder look sharp. If the knob is difficult to turn, remove the eyecup (p.185). T o obtain sharp images, hold the ca mera still to minimize camera shake.
44 Basic Operation The shutter button has two steps. Y ou can press the shutter button halfway . Then you can further press the shutter button completely . Pressing halfway This activates autofocusing and the automatic exposure system that sets the shutter speed and aperture.
45 Basic Operation T urn the dial while holding down the lock release button at the center of the dial. (1) After pressing a button, turn the < 6 > dial. When you press a button such as < n > < o > < m >, the respective function remains selected for 6 seconds ( 9 ).
46 Basic Operation (1) After pressing a button, turn the < 5 > dial. When you press a button su ch as < n > < o > < m >, the respective function remains selected for 6 seconds ( 9 ). During this time, you can turn the < 5 > dial to set the desired setting.
47 Basic Operation The < 9 > consists of an eight-direction key and a button at the center . Use it to select the AF point, correct the white balance, move the AF point or magnifying frame during Live View shooting, scroll around magnified images during playback, operate the Quick Control screen, etc.
48 Basic Operation T urn on ( 9 )/off the LCD panel illumination by pressing the < U > button. During a bulb exposure, pressing the shutter button completely will turn off the LCD panel illumination. After you press the < B > button a number of times, the shooting settings will be displayed.
49 Y ou can directly select and set the shooting functions displayed on the LCD monitor . This is called the Quick Control screen. 1 Press the < Q > button. X The Quick Control screen will appear ( 7 ). 2 Set the desired function. Use < 9 > to select a function.
50 Q Quick Control for Shooting Functions Select the desired function and press < 0 >. The function’s setting screen will appear . T urn the < 5 > or < 6 > dial to change the setting. There are also functions that are set by pressing the < B > button.
51 With menus, you can set various func tions such as the image-recording quality , date/time, etc. While looking at the LCD monitor , use the < M > and < Q > buttons on the camera back and the < 6 > < 5 > dials. * Some menu tabs and menu item s are not displayed in the < A > mode.
52 3 Menu Operations 1 Display the menu screen. Press the < M > button to display the menu screen. 2 Select a ta b. Each time you press the < Q > button, the main tab will switch.
53 If the card is new or was previous ly formatted by another camera or computer , format the card with the camera. When the card is formatted, all images and data in the card will be erased. As even protecte d images will be erased, make sure there is nothing you need to keep.
54 Before You Start The card is new . The card was formatted by a diff erent camera or a computer . The card is full with images or data. A card-related error is displayed (p.
55 Before You Start T o save battery power , the camera turns off automatically after a set time of idle operation elapses. If you do not want the camera to turn off automatically , set this to [ Disable ]. After the power turns of f, you can turn on the camera again by pressi ng the shutter button or other buttons.
56 Before You Start The camera’s shooting settings and me nu settings can be reverted to their defaults. 1 Select [Clear all camera settings]. Under the [ 5 4 ] tab, select [ Clear all camera settings ], then press < 0 >. 2 Select [OK]. Select [ OK ], then press < 0 >.
57 Before You Start Image-recording Settings AF Settings Image quality 73 Case 1 - 6* Case1/Parameter settings of all cases cleared Picture Style St andard Auto Lighting Optimizer S tandard AI Servo 1.
58 Before You Start Camera Settings Live View Shooting Settings Auto power off 1 min. Live View shootin g Enable Beep Enable AF mode Live mode Release shutter without card Enable Grid display Off Aspect ratio 3:2 Image review 2 sec.
59 Y ou can display a grid and electronic level in the viewfinder and on the LCD monitor to help correct camera tilt. 1 Select [VF grid display]. Under the [ 5 2 ] tab, select [ VF grid display ], then press < 0 >. 2 Select [Enable]. T urn the < 5 > dial to select [ Enable ], then press < 0 >.
60 Displaying the Grid and Electronic Level 1 Press the < B > button. Each time you press the < B > button, the screen display will change. Display the electronic level. If the electronic level does not appear , set [ 5 3: z button display options ] so that the electronic level can be displayed (p.
61 When [ z Help ] is displayed at the bottom of the menu screen, the Feature guide can be displayed. The Feature guide is displayed while you hold down the < B > button. If the Feature guide fills two or more screens, a scroll bar will appear on t he right edge.
62 C OP Y.
63 Basic Shooting This chapter explains how to use the Mode Dial’s < A > (Scene Intelligent Auto) m ode for easy picture taking. In the < A > mode , all you do is point and shoot and the camera sets everything automatically (p.
64 < A > is a fully-automatic mode. The camera analyzes the scene and sets the optimum settings automatically . Detecting whether the subject is still or moving, it also adjusts focus automatically . 1 Set the Mode Dial to < A >. T urn the Mode Dial while holding down the lock release button at the center .
65 A Fully Automatic Shooting (Scene Intelligent Auto) 4 T ake the picture. Press the shutter button completely to take the picture. X The captured image will be displayed for 2 sec. on the LCD monitor . The focus confirmation light < o > blinks and focus is not achieved.
A Fully Automatic Shooting (Scene Intelligent Auto) 66 The shutter speed display is blinking. Since it is too dark, taking the pictur e may result in a blurred subject due to camera shake. Using a tripod or a Canon EX-series S peedlite (p.188) (sold separately) is recommended.
67 Depending on the scene, position the subject toward the left or right to create a balanced background and good perspective. In the < A > mode, while you press the shutter button halfway to focus a still subject, the focus will be locked. Y ou can then recompose the shot and press the shutter button comple tely to take the picture.
A Full Auto Techniques (Scene Intelligent Auto) 68 Y ou can shoot while viewing the image on the LCD monitor . This is called “Live View shooting”. For details, see p age 197. 1 Set the Live View shooting/Movie shooting switch to < A >. 2 Display the Live View image on the LCD monitor .
69 Setting the AF and Drive Modes The 61 AF points in the viewfinder make AF shooting suitable for a wide variety of subjects and scenes. Y ou can also select the AF mode and drive mode that best match the shooting conditions and subject.
70 Y ou can select the AF mode to suit the shooting conditions or subject. In the < A > mode, “AI Focus AF” is set automatically . 1 On the lens, set the focus mode switch to <AF>. 2 Press the < o > button. ( 9 ) 3 Select the AF mode.
71 f : Selecting the AF Mode N This AF mode is suited for moving subjects when the focusing distance keep s changing. While you hold down the shutter button halfway , the subject will be focused continuously . The exposure is set at the moment the picture is taken.
72 61 AF points are provided for AF . Y ou can select the AF point(s) suiting the scene or subject. Depending on the lens attached to the camera, the number of usable AF points and AF point p a tterns will differ . For details, see “Lenses and Usable AF Points” on p age 79.
73 S Selecting the AF Area N AF point exp ansion (Manual selection, surrounding point s) The manually-selected AF point < S > and the surrounding AF points < w > are used to focus. Zone AF (Manual selection of zone) The 61 AF points are divided into nine zones for focusing.
74 S Selecting the AF Area N Y ou can manually select the AF poin t or zone. With 61-point automatic selection AF , you can set the star ting AF point for AI Servo AF . 1 Press the < S > button. X The AF points will be displayed in the viewfinder .
75 Although this is the same as single-point AF , the selected AF point < O > covers a smaller area to focus. Effective for pinpoint focusing of overlapping subjects such as an animal in a cage. Since S pot AF covers a very small area, focusing may be difficult during han d-held shooting or for a moving subject.
76 AF Area Selection Modes N The manually-selected AF point < S > and adjacent AF points < w > are used to focus. The AF point expans ion is larger than with AF point expansion (Manual selection ), so the focusing is executed over a wider area.
77 AF Area Selection Modes N All the AF points are used to focus. This mode is set automatically in the < A > mode. With One-Shot AF , pressing the shutter button halfway will display the AF point(s) < S > that achieved focus. If multiple AF points are displayed, it means they all have achieved focus.
78 The camera’s AF sensor has 61 AF points. The illustration below shows the AF sensor pattern corresponding to each AF point. With f/2.8 or larger maximum aperture lenses, high-precision AF is possible at the viewfinder center . Depending on the lens attached to the camera, the number of usable AF points and AF p attern will differ .
79 Autofocusing with 61 points is possibl e. All of the AF area selection modes are selectable. : Dual cross-type AF point. Subject tracking is superior and the focusing precision is higher than with other AF points. : Cross-type AF point. Subject tracking is superior and high- precision focusing is achieved.
80 Lenses and Usable AF Points * Manual focus without tilt/shift. Autofocusing with 61 points is possibl e. All of the AF area selection modes are selectable. : Dual cross-type AF point. Subject tracking is superior and the focusing precision is higher than with other AF points.
81 Lenses and Usable AF Points * Manual focus without tilt/shift. Autofocusing with 61 points is possibl e. All of the AF area selection modes are selectable. : Dual cross-type AF point. Subject tracking is superior and the focusing precision is higher than with other AF points.
82 Lenses and Usable AF Points Autofocusing with 61 points is possibl e. All of the AF area selection modes are selectable. : Cross-type AF point. Subject tracking is superior and high- precision focusing is achieved. : AF points sensitive to horizontal lines.
83 Lenses and Usable AF Points Autofocusing with only 47 points is possible. (Not possible with all 61 AF points.) All of the AF area selection modes are selectable. During automatic AF point selection, the outer frame marking the AF area (Area AF frame) will be different fr om 61-point automatic selection AF .
84 Lenses and Usable AF Points Autofocusing with only 33 points is possible. (Not possible with all 61 AF points.) All of the AF area se lection modes are selectable. During automatic AF point selection, the outer frame marking the AF area (Area AF frame) will be different fr om 61-point automatic selection AF .
85 Y ou can easily fine-tune AI Servo AF to suit a particular subject or scene just by selecting between case 1 to case 6. This feature is called the “AF Configuration T ool.” 1 Select the [ 2 1] t ab. 2 Select a case. T urn the < 5 > dial to select a case icon, then press < 0 >.
86 3 Selecting AI Servo AF Characteristics (For a Subject) N S tandard setting suited for any moving subject. Works with many subjects and scenes. Select [ Case 2 ] to [ Case 6 ] in the following case.
87 3 Selecting AI Servo AF Characteristics (For a Subject) N Once an AF point starts tracking the subject, this setting enables the camera to focus consecutive subjects at different distances. If a new subject appears in front of the target su bject, the camera will start focusing the new subject.
88 3 Selecting AI Servo AF Characteristics (For a Subject) N Even if the target subject moves dramatically up, down, left, or right, the AF point will switch automatically to focus-track the subject. Effective for shooting subjects that move dramatically up, down, left, or right.
89 3 Selecting AI Servo AF Characteristics (For a Subject) N Geared for tracking moving subjects whose speed can change dramatically and suddenly . Also, if the target subject moves dramatically up, down, left or right and it is difficult to focus, the AF point switches automatically to track the subject.
90 3 Selecting AI Servo AF Characteristics (For a Subject) N T racking sensitivity Sets the subject-tracking sensitivity during AI Servo AF when an obstacle enters the AF points or when the AF points stray from the subject. [ 0 ] S tandard setting suited for most moving subjects.
91 3 Selecting AI Servo AF Characteristics (For a Subject) N Accel./decel. tracking This sets the tracking sensitivity for moving subjects whose speed can suddenly change dramatically by starting or stopping suddenly , etc. [ 0 ] Suited for subjects that move at a fixed speed.
92 3 Selecting AI Servo AF Characteristics (For a Subject) N AF pt auto switching This sets the switching sensitivity of the AF points as they track the subject moving dramatically up, down, left, or right.
93 3 Selecting AI Servo AF Characteristics (For a Subject) N Y ou can adjust each case’s three parame ters (1. T racking sensitivity , 2. Accel./decel. tracking, and 3. AF pt auto switching) as desired. 1 Select a case. T urn the < 5 > dial to select the icon of the case you want to adjust.
94 With the [ 2 2 ] to [ 2 5 ] menu tabs, you can set the AF functions to suit your shooting style or subject. Y ou can set the AF operation characte ristics and shutter-release timing for the first shot during continuous shooting with AI Servo AF . : Equal priority Equal priority is given to focusing and shutter release.
95 3 Customizing AF Functions N Y ou can set the AF operation characte ristics and shutter-release timing during continuous shooting after t he first shot with AI Servo AF . : Equal priority Equal priority is given to focusing and continuous shooting speed.
96 3 Customizing AF Functions N For the lenses below , which have an electronic focusing ring, you can set whether to use the electronic focusing ring. : Enable af ter One-Shot AF After AF operates, if you keep pressing the shutter button, you can focus manually .
97 3 Customizing AF Functions N Enables or disables the EOS-dedi cated S peedlite’s AF-assist beam. ON: Enable The external S peedlite em its the AF- assist beam when necessary . OFF: Disable The external S peedlite will not emit the AF-assist beam.
98 3 Customizing AF Functions N If focus cannot be achieved with aut ofocus, you can have the camera keep searching for the correct fo cus or have it stop searching. ON: Continue focus search If focus cannot be achieved with autofocus, the lens is driven to search for the correct focus.
99 3 Customizing AF Functions N : 15 points Fifteen major AF point s will be manually selectable. : 9 point s Nine major AF points will be manually selectable.
100 3 Customizing AF Functions N : Manual select.:Zone AF The 61 AF points are divided into nine zones for focusing. : Auto selection: 61 pt AF All of the AF points are used for focusing. Y ou can set the method for changing the AF area selection mode.
101 3 Customizing AF Functions N Y ou can set the AF area selecti on mode and manually-selected AF point separately for vertical shooting and horizontal shooting. : Same for both vert/horiz The same AF area selection mode and manually-selected AF point (or Zone) are used for both vertical shooting and horizontal shooting.
102 3 Customizing AF Functions N During manual AF point selection, the selection can either stop at the outer edge or it can move to the op posite AF point. This function works in AF area selection modes other than 61-point automatic selection AF and Zone AF .
103 3 Customizing AF Functions N The AF points and grid in the viewfin der can be illuminated in red when focus is achieved. AUTO: Auto The AF points and grid are automatically illuminated in red under low light. ON: Enable The AF points and grid are illuminated in red regardless of the ambient light level.
104 Fine adjustment of the AF’s point of focus is possible for viewfinder shooting and Live View shooting in the Quick mode. This is called “AF Microadjustment”. Before making the adjustment, read “Notes for AF Microadjustment” on page 109. Normally , this adjustment is not required.
105 3 Fine Adjustment of AF’s Point of Focus N 4 Make the adjustment. T urn the < 5 > dial to make the adjustment. The adjustable range is ±20 steps. Setting it toward “–: ” will shift the point of focus in front of the standard point of focus.
106 3 Fine Adjustment of AF’s Point of Focus N Y ou can make the adjustment for each lens and register the adjustment in the camera. Y ou can register the adjustment for up to 40 lenses. When you autofocus with a lens whos e adjustment has been registered, the point of focus will always be shifted by the adjustment amount.
107 3 Fine Adjustment of AF’s Point of Focus N Enter the serial number . T urn the < 5 > dial to select the digit, then press < 0 > to display < r >. T urn the < 5 > dial to enter the number , then press < 0 >. After entering all the digit s, turn the < 5 > dial to select [ OK ], then press < 0 >.
108 3 Fine Adjustment of AF’s Point of Focus N 4 Make the adjustment. For a zoom lens, turn the < 5 > dial and select the wide-angle (W) or telephoto (T) end. Pressing < 0 > will turn off the purple frame and make the adjustment possible.
109 3 Fine Adjustment of AF’s Point of Focus N When [ Clear all ] appears at the bottom of the screen, pressing the < L > button will clear all the adjustments made for [ All by same amount ] and [ Adjust by lens ].
110 Autofocus can fail to achieve focus (v iewfinder ’s focus confirmation light < o > blinks) with certain subject s such as the following: Subjects difficult to focus V ery low-contrast subjects (Example: Blue sky , solid-color walls, etc.
111 When Autofocus Fails 1 Set the lens focus mode switch to <MF>. X < 4 L > will be displayed on the LCD panel. 2 Focus the subject. Focus by turning the lens focusing ring until the subject looks sharp in the viewfinder .
112 Single and continuous dr ive modes are provided. 1 Press the < o > button. ( 9 ) 2 Select the drive mode. While looking at the LCD panel, turn the < 5 > dial. u : Single shooting When you press the shutter button completely , only one shot will be taken.
113 j Using the Self-timer 1 Press the < o > button. ( 9 ) 2 Select the self-timer . While looking at the LCD panel, turn the < 5 > dial to select the self-timer . Q : 10-sec. self-timer k : 2-sec. self-timer 3 T ake the picture. Look through the viewfi nder , focus the subject, then press the shutte r button completely .
114 j Using the Self-timer If you will not look thro ugh the viewfinder when you press the shut ter button, attach the eyepiece cover (p.185). If stray light enters th e viewfinder when the picture is taken, it may throw off the exposure. The < k > enables you to shoot whil e not touching the camera mounted on a tripod.
115 Image Settings This chapter explains image -related function settings: Image-recording quality , ISO speed, Picture Style, white balance, Auto Lighting Optimizer , lens peripheral illumination correction, chro matic aberration correction, and other functions.
116 If either a CF card or SD card is already inserted, you can start shooting. When only one card is inserted, the procedures described on pages 1 16 to 1 18 are not necessary . If you insert both a CF card and SD card, you can select the recording method and select which card to use for recording and playing back images.
117 3 Selecting the Card for Recording and Playback St andard Images will be recorded to the card selected with [ Record/play ]. Auto switch card Same as with the [ St andard ] setting, but if the card becomes full, the camera will automatically switch to the other card to record images.
118 3 Selecting the Card for Recording and Playback If [ Record func. ] is set to [ Stand ar d ] or [ Auto switch card ], select the card for recording and playing images. If [ Record func. ] is set to [ Rec. separately ] or [ Rec. to multiple ], select the card for playing images.
119 Y ou can select the pixel count and the image quality . There are eight JPEG image-recording quality settings: 73 , 83 , 74 , 84 , 7 a , 8 a , b , c . There are three RAW image quality settings: 1 , 41 , 61 (p.122). 1 Select [Image quality]. Under the [ z 1 ] tab, select [ Image quality ], then press < 0 >.
120 3 Setting the Image-Recording Quality Image-recording Quality Setting Examples 73 only 61 + 74 1 + 73 1 only If [–] is set for both RA W and JPEG , 73 will be set.
121 3 Setting the Image-Recording Quality Guide to Image-Recording Quality Settings (Approx.) *1: b is suitable for playing the images on a digita l photo frame. *2: c is suitable for emailing the im age or using it on a We b site. b and c will be in 7 (Fine) quality .
122 3 Setting the Image-Recording Quality A RA W image is raw data output by the image sensor converted to digital data. It is recorded to the card as is, and you can select the quality as follows: 1 , 41 , or 61 . A 1 image can be processed with [ 3 1: RA W image processing ] (p.
123 3 Setting the Image-Recording Quality With Custom Controls, you can as sign the image-recording quality to the < B > button or depth-of-field preview button so you can switch to it momentarily .
124 Set the ISO speed (image sensor ’s se nsitivity to light) to suit the ambient light level. With the < A > mode selected, the ISO speed will be set automatically (p.125). Regarding the ISO speed during movi e shooting, see pages 221 and 224.
125 i : Setting the ISO Speed N If the ISO speed is set to “ A ” (Auto), the actual ISO speed to be set will be displayed when you press the shutter button halfway . As indicated below , the ISO speed will be set automatically to su it the shooting mode.
126 i : Setting the ISO Speed N Y ou can set the manually-settabl e ISO speed range (minimum and maximum limits). Y ou can set the minimu m limit within L (ISO 50) to H1 (ISO 51200), and the maximum limit wi thin ISO 100 to H2 (ISO 102400). 1 Select [ISO speed settings].
127 i : Setting the ISO Speed N Y ou can set the automatic ISO speed range for Auto ISO within ISO 100 - 25600. Y ou can set the minimum lim it within ISO 100 - 12800, and the maximum limit within ISO 200 - 25600 in whole-stop increments. 1 Select [Auto ISO range].
128 i : Setting the ISO Speed N When Auto ISO is set, you can set the minimum shutter speed (1/250 sec. to 1 sec.) so that the automatically-set shutter speed is not too slow . This is convenient in the < d > and < f > modes when you use a wide- angle lens to shoot a moving subject.
129 By selecting a Picture S tyle, y ou can obtain image characteristics matching your photographic ex pression or the subject. The Picture S tyle is set automatically to < D > (Auto) in the < A > mode. 1 Press the < b > button. 2 Select [ A ].
130 A Selecting a Picture Style N D Auto The color tone will be adjusted aut omatically to suit the scene. The colors will look vivid, especia lly for blue skies, greenery , and sunsets in nature, outdoor , and sunset scenes. P St andard The image looks vivid, sharp, and crisp.
131 A Selecting a Picture Style N V Monochrome Creates black-and-white images. W User Def. 1-3 Y ou can register a basic style such as [ Portrait ], [ Landscape ], a Picture S tyle file, etc., and adjust it as desired (p.135). Any User Defined Picture S tyle that has not been set will have the same settings as the [ Stand a rd ] Picture S tyle.
132 Y ou can customize a Picture S tyle by adjusting individual parameters such as [ Sharpness ] and [ Contrast ]. T o see the resulting effects, t ake test shots. T o customize [ Monochrome ], see page 134. 1 Press the < b > button. 2 Select [ A ].
133 A Customizing a Picture Style N 5 Set the parameter . T urn the < 5 > dial to set the parameter as desired, then press < 0 >. Press the < M > button to save the adjusted parameters. The Picture S tyle selection screen will reappear.
134 A Customizing a Picture Style N For Monochrome, you can also set [ Filter effect ] and [ T oning effect ] in addition to [ Sharpness ] and [ Contrast ] explained on the preceding pag e. k Filter Effect With a filter effect applied to a monochrome image, you can make white clouds or green trees stand out more.
135 Y ou can select a base Picture S tyle such as [ Portrait ] or [ Landscape ], adjust its p arameters as des ired and register it under [ User Def. 1 ], [ User Def. 2 ], or [ User Def. 3 ]. Y ou can create Picture Styles w hose p arameter settings such as sharpness and contrast are different.
136 A Registering a Picture Style N 6 Select a pa rameter . T urn the < 5 > dial to select a parameter such as [ Sharpness ], then press < 0 >. 7 Set the p arameter . T urn the < 5 > dial to set the parameter as desired, then press < 0 >.
137 White balance (WB) is for making the white areas look white. Normally , the < Q > (Auto) setting will obtain the correct white balance. If natural-looking colors cannot be obtained with < Q >, you can select the white balance to match the light source or set it m anually by shooting a white object.
138 B : Setting the White Balance N Custom white balance enables you to manually set the white balance for a specific light source for better accuracy . Do this procedure under the actual light source to be used. 1 Photograph a white object. The plain, white object should fill the spot metering circle.
139 B : Setting the White Balance N Y ou can set the white balance’s co lor temperature numerically in kelvins. This is for advanced users. 1 Select [White balance]. Under the [ z 2 ] tab, select [ White balance ], then press < 0 >. 2 Set the color temperature.
140 Y ou can correct the white balance th at has been set. This adjustment will have the same effect as using a commercially-available color temperature conversion filter or color compensating filter . Each color can be corrected to one of nine levels.
141 u White Balance Correction N With just one shot, th ree images having a different color balance can be recorded simultaneously . Based on the color temperature of the current white balance setting, the image will be br acketed with a blue/amber bias or magenta/green bias.
142 If the image comes out dark or the cont rast is low , the brightness and contrast can be corrected automatica lly . This function is called Auto Lighting Optimizer . The default setting is [ Standard ]. With JPEG images, the correction is appli ed when the image is captured.
143 This function reduces the noise ge nerated in the image. Although noise reduction is applied at all ISO speeds, it is particularly ef fective at high ISO speeds. At low ISO speeds, the noise in the shadow areas is further reduced. 1 Select [High ISO speed NR].
144 3 Noise Reduction Settings N Noise reduction is possible with images exposed for 1 sec. or longer . 1 Select [Long exp. noise reduction]. Under the [ z 3 ] tab, select [ Long exp. noise reduction ], then press < 0 >. 2 Set the desired setting.
145 3 Noise Reduction Settings N With [ Auto ] and [ Enable ], after the picture is ta ken, the noise reduction process may take the same amount of time as the exposure. During noise reduction, shooting is still possible as long as the maximum burst indicator in the viewfind er shows “1” or higher .
146 Y ou can minimize overexposed highlight areas. 1 Select [Highlight tone priority]. Under the [ z 3 ] tab, select [ Highlight tone priority ], then press < 0 >. 2 Select [Enable]. T urn the < 5 > dial to select [ Enable ], then press < 0 >.
147 Peripheral light fall-off occurs in le nses whose characteristics make the image corners look darker . Color fringi ng along subject outlines also is a chromatic aberration. Light fall-off and color fringing can be corrected. The default setting is [ Enable ] for both corrections.
148 3 Lens Peripheral Illumination / Chromatic Aberration Correction 1 Select the setting. Check that [ Correction data available ] is displayed for the attached lens. T urn the < 5 > dial to select [ Chromatic aberration ], then press < 0 >.
149 3 Lens Peripheral Illumination / Chromatic Aberration Correction The camera already contains lens peripheral illumination correction data and chromatic aberration correction data for approx.
150 Y ou can freely create and select the folder where the captured images are to be saved. This is optional since a folder will be created automatically for saving captured images. 1 Select [Record func+card/folder sel.]. Under the [ 5 1 ] tab, select [ Record func+card/folder sel.
151 3 Creating and Selecting a Folder With the folder selection screen displayed, turn the < 5 > dial to select the desired folder , then press < 0 >. X The folder where the captured images will be saved is selected. Subsequent captured images will be recorded into the selected folder .
152 The file name has four alphanumeric characters followed by a four-digit image number (p.154) and extension. The first four alphanumeric characters are set upon factory shipment and unique to the camera. However , you can change them. With “User setting1”, you can change and register the four characters as desired.
153 3 Changing the File Name 4 Exit the setting. Enter the required number of alphanumeric characters, then press the < M > button. X The new file name will be registered and the screen in step 2 will reappear . 5 Select the registered file name.
154 The four-digit file number is like the frame number on a roll of film. The captured images are assigned a sequential file number from 0001 to 9999 and saved in one folder . Y ou can change how the file number is assigned. 1 Select [File numbering].
155 3 File Numbering Methods The file numbering restart s from 0001 each time the card is replaced or a new folder is created. When you replace the card, create a folder , or switch the target card (such as f → g ), the file numbering cont inues in sequence from 0001 for the images saved.
156 When you set the copyright information , it will be recorded to the image as Exif information. 1 Select [Copyright information]. Under the [ 5 4 ] tab, select [ Copyright information ], then press < 0 >.
157 3 Setting Copyright Information N When you select [ Display copyright info. ] in step 2 on the preceding page, you can check the [ Author ] and [ Copyright ] information that you entered. When you select [ Delete copyright information ] in step 2 on the preceding page, you can delete the [ Author ] and [ Copyright ] information.
158 The range of reproducible colors is called the color space. With this camera, you can set the color space for captured images to sRGB or Adobe RGB. For normal shooting, sRGB is recommended. The color space is set automatically to sRGB in the < A > mode.
159 Advanced Operations In the d / s / f / a / F shooting modes, you can select the shutter speed, aperture, and other camera settings to change the exposure and obtain the desired result. A M icon at the upper right of a page title indicates that the function can be used when the Mode Dial is set to < d / s / f / a / F >.
160 The camera automatically sets the shutter speed and aperture to suit the subject’s brightness. This is called Program AE. * < d > stands for Program. * AE stands for autoexposure. 1 Set the Mode Dial to < d >. 2 Focus the subject. Look through the viewfinder and aim the AF point over the subject.
161 d : Program AE If the “ 30" ” shutter speed and the maximum aperture blink, it indica tes underexposure. Increase the ISO speed or use flash.
162 In this mode, you set the shutter speed and the camera automatically sets the aperture to obtain the st anda rd exposure suiting the brightness of the subject. This is called shutter- priority AE. A faster shutter speed can freeze the action or a moving s ubject.
163 s : Shutter-Priority AE If the maximum aperture blinks, it indicates underexposure. T urn the < 6 > dial to set a slower shutter speed until the aperture stops blinking or set a higher ISO speed. If the minimum aperture blinks, it indicates overexposure.
164 In this mode, you set the desired aperture and the camera sets the shutter speed automatically to obtain the standard exposure suiting the subject brightness. This is called aperture-priority AE. A higher f/number (smaller aperture hole) w ill make more of the foreground and background fall within acceptable focus.
165 f : Aperture-Priority AE The aperture opening (diaphragm) changes only at the moment when the picture is taken. Otherwise, the aperture remains fully open. Therefore, when you look at the sce ne through the view finder or on the LCD monitor , the depth of field will look narrow .
166 In this mode, you set both the shutter speed and aperture as desired. T o determine the exposure, refer to the exposure level indicator in the viewfinder or use a commercially-a vailable exposure meter . This method is called manual exposure. * < a > stands for Manual.
167 q Selecting the Metering Mode N 1 Press the < n > button. ( 9 ) 2 Select the metering mode. While looking at the LCD panel, turn the < 6 > dial.
168 q Selecting the Metering Mode N r Spot metering This is for metering a specif ic spot of the subject or scene. The metering is weighted at the center covering approx. 1.5% of the viewfinder area. e Center-weighted average metering The metering is weighted at the center and then averaged for the entire scene.
169 Exposure compensation can brighten (increased exposure) or darken (decreased exposure) the standard exposure set by the camera. Exposure compensation can be set in the d / s / f shooting modes.
170 By changing the shutter speed or a perture automatically , the camera brackets the exposure up to ±3 stop s in 1/3-stop increments for three successive shots. This is called AEB. * AEB stands for Auto Exposure Bracketing. 1 Select [Expo.comp./AEB].
171 Use AE lock when the area of focus is to be different from the exposure metering area or when you want to ta ke multiple shots at the same exposure setting. Press the < A > button to lock the exposure, then recompose and take the shot. This is called AE lock.
172 When bulb is set, the shutter stays open as long as you hold down the shutter button completely , and closes when you let go of the shutter button. This is called bulb exposure. Use bulb exposures for night scenes, fireworks, the heavens, and other subjects requiring long exposures.
173 Y ou can take artistic photos having a high dynamic range and preserving detail in highlight and shadow areas. HDR shooting is effective for landscape and still-life shots.
174 w : HDR (High Dynamic Range) Shooting N About Effects Natural For images preserving a wide tonal range where the highlight and shadow detail would otherwise be lost.
175 w : HDR (High Dynamic Range) Shooting N 5 Set [Continuous HDR]. Select either [ 1 shot only ] or [ Every shot ], then press < 0 >. With [ 1 shot only ], HDR shooting will be canceled automatically after the shooting ends. With [ Every shot ], HDR shooting continues until the setting in step 3 is set to [ Disable HDR ].
176 w : HDR (High Dynamic Range) Shooting N Using a tripod is recommended. For handheld shooting, using a fast shutter speed is recommended. HDR shooting of a moving subject is not recommended because the movement of the subject will appea r as afterimages in the merged image.
177 Y ou can shoot two to nine exposures to be merged into one image. If you shoot multiple-exposure images with Live View shooting (p.197), you can see how the single expo sures merge while shooting. 1 Press the < b > button. 2 Select multiple exposure.
178 P Multiple Exposures N 4 Set [Multi-expos ctrl]. Select the desired multiple-exposure control method, then press < 0 >. Additive The exposure of each single exposure is added cumulatively . Based on the [ No. of exposures ], set a negative exposu re compensation.
179 P Multiple Exposures N 6 Set the images to be saved. T o save all the single exposures and the merged multiple-exposure image, select [ All images ], then press < 0 >. T o save only the merged multiple- exposure image, select [ Result only ], then press < 0 >.
180 P Multiple Exposures N 9 Shoot subsequent exposures. X When [ On:Func/Ctrl ] is set, the merged multiple-exposure image will be displayed. With Live View shooting, the mu ltiple-exposure images merged so far will be displayed. By pressing the < B > button, you can display only the Live View image.
181 P Multiple Exposures N Y ou can select an image recorded in the card as the first single exposure. The original of the se lected image will remain intact. Y ou can only select 1 images. Y ou cannot select 41 / 61 or JPEG images. 1 Select [Select image for multi.
182 P Multiple Exposures N When [ On:Func/ctrl ] is set and you have not finished shooting the set number of exposures, you can press the < x > button to view the merged multiple-exposure image so far . Y ou can check how it looks and the exposure.
183 P Multiple Exposures N Are there any restrictions on the image-recording quality? All JPEG image-recording quality settings can be selected. If 41 or 61 is set, the merged multiple-exposure will be a 1 image. Can I merge images recorded in the card? With [ Select image for multi.
184 Although using the self-timer or Re mote Switch can prevent camera shake, using mirror lockup to prevent camera vibrations (mirror shock) can also help when you use a super telephoto lens or shoot close ups (macro photography). 1 Set [Mirror lockup] to [Enable].
185 When you use the self-timer or shoot bulb exposures and do not look through the viewfinder , stray light en tering the viewfinder can cause the image to come out dark. T o prevent this, use the eyepiece cover (p.27) attached to the camera strap. During Live View shooting and movi e shooting, attaching the eyepiece cover is not necessary .
186 With Remote Controller RC-6 (sold separately), you can shoot remotely up to approx. 5 meters/16.4 feet from the camera. Y ou can either shoot immediately or use a 2-sec. delay . Y ou can also use Remote Controller RC-1 and RC-5. 1 Focus the subject.
187 Flash Photography This chapter explains how to shoot with an EOS- dedicated, EX-series S peedlit e (sold separately) or non- Canon flash unit and how to set flash functions on the camera’s menu screen.
188 An EX-series S peedlite (sold sepa rately) makes flash photography as easy as normal shooting. For detailed instructions, refe r to the EX-series S peedlite’s instruction manual. This camera is a T ype-A camera that can use all the features of EX-series S peedlites.
189 D Flash Photography With an EZ/E/EG/ML/TL-series Speedlite set to A-TTL or TTL autoflash mode, the flash can be fired at full output only . Set the camera’s shooting mode to < a > (manual exposure) or < f > (aperture-priority AE) and ad just the aperture setting before shooting.
190 D Flash Photography If the camera is used with a flash unit or flash accessory dedicated to another camera brand, the camera may not operate properly and malfunction may result. Do not connect to the ca mera’s PC terminal any flash unit requiring 250 V or more.
191 With an EX-series S peedlite having compatible flash function settings, you can use the camera’s menu screen to set the S peedlite’s functions and Custom Functions. Attach the S peedlite to the camera and turn on the Speedlite. For details on the S peedlite’s func tions, refer to the S peedlite’s instruction manual.
192 3 Setting the Flash N Y ou can set the flash-sync speed for flash photography in the aperture-priority AE ( f ) mode. : Auto The flash sync speed is set automatically within a range of 1/200 sec. to 30 sec. to suit the scene’s brightness. High-speed sync is also possible.
193 3 Setting the Flash N On the screen, the settable functi ons and the display will differ depending on the Speedlite, current flash mode, flash Custom Function settings, etc. For details on your S peedlite’s flash functions, refer to the S peedlite’s instruction manual.
194 3 Setting the Flash N Wireless functions Wireless (multiple) flash shooting is possible with radio or optical transmission. For details on wireless flash, refer to the S peedlite’s instruction manual. Flash zoom (Flash coverage) With S peedlites having a zooming flash head, you can set the flash coverage.
195 3 Setting the Flash N Flash exposure compensation The same setting as “Flash exposure compensation” on page 188 can be set. For details, refer to the S peedlite’s instruction manual. Flash exposure bracketing While the flash output is changed automatically , three shots are taken.
196 3 Setting the Flash N For details on the S peedlite’s Custom Functions, refer to the S peedlite’s instruction manual. 1 Select [Flash C.Fn settings]. Select [ Flash C.Fn settings ], then press < 0 >. 2 Set the functions. T urn the < 5 > dial to select the number , then press < 0 >.
197 Shooting with the LCD Monitor (Live View Shooting) Y ou can shoot while viewing the picture on the camera’s LCD monitor . This is called “Live View shooting”. Live View shooting is enabled by setting the Live View shooting/ Movie shooting switch to < A >.
198 1 Set the Live View shooting/Movie shooting switch to < A >. 2 Display the Live View image. Press the < 0 > button. X The Live View image will appear on the LCD monitor . The Live View image w ill closely reflect the brightness level of the ac tual image you capture.
199 A Shooting with the LCD Monitor Set [ z 4: Live View shoot. ] to [ Enable ]. In the < A > mode, it is displayed under [ z 2 ]. Battery Life with Live View Shooting [Approx. number of shots] The figures above are based on a fully- charged Battery Pack LP-E6 and CIP A (Camera & Imaging Products As sociation) testing standards.
200 A Shooting with the LCD Monitor Each time you press the < B > button, the information display will change. About the Information Display ISO speed Possible shots Exposure level Aperture Shut.
201 A Shooting with the LCD Monitor The final image simulation reflects the effect s of the Picture Style, white balance, etc., in the Live View image so you can see what the captured image will look like. During shooting, the Live View image will automatically reflect the function settings listed below .
202 While the Live View image is displayed, if you press the < m >, < o >, < n >, < S >, or < b > button, the setting screen will appear on the LCD monitor an d you can turn the < 6 > or < 5 > dial to set the respective shooting function.
203 Function settings particular to Live Vi ew shooting are explai ned here. The menu options under the [ z 4 ] tab are explained on pages 203-206. In the < A > mode, it is displayed under [ z 2 ]. The functions settable on this menu screen only apply during Live View shooting.
204 3 Menu Function Settings Aspect ratio N The image’s aspect ratio can be set to [ 3:2 ], [ 4:3 ], [ 16:9 ], or [ 1:1 ]. The area surrounding the Live Vi ew image is masked in black when the following aspect ratios are set: [ 4:3 ] [ 16:9 ] [ 1:1 ].
205 3 Menu Function Settings Exposure simulation N Exposure simulation displays and simu lates how the brightness of the actual image (exposure) will look. •E n a b l e ( g ) The displayed image brightness will be close to the actual brightness (exposure) of the resulting image.
206 3 Menu Function Settings Silent L V shooting N •M o d e 1 The shooting operation noise is qui eter than with normal shooting. Continuous shooting is also possible. If < o > is set, you can shoot at a maximum continuous shooting speed of approx.
207 The AF modes available are [ Live mode ], [ u Live mode ] (face detection, p.208), and [ Quick mode ] (p.212). If you want to achieve precise focus, set the lens focus mode switch to < MF >, magnify the image, and focus manually (p.214). Select the AF mode.
208 Using AF to Focus 3 Focus the subject. Aim the AF point over the subject and press the shutter button halfway . X When focus is achieved, the AF point will turn green a nd the beeper will sound. X If focus is not achieved, the AF point will turn orange.
209 Using AF to Focus 2 Focus the subject. Press the shutter button halfway and the camera will focus the face covered by the < p > frame. X When focus is achi eved, the AF point will turn green a nd the beeper will sound. X If focus is not achieved, the AF point will turn orange.
210 Using AF to Focus AF operation Focusing will take slightly longer . Even when focus has been achieved, pressing the shutter button halfway will focus again.
211 Using AF to Focus Shooting conditions that can make focusing difficult Low-contrast subjects such as the blue sky and solid-color , flat surfaces. Subjects in low light. S tripes and other patterns where there is contrast only in the horizontal direction.
212 Using AF to Focus The dedicated AF sensor is used to focus in One-Shot AF mode (p.70), using the same AF method as with viewfinder shooting. Although you can focus th e target area quickly , the Live View image will be interrupted momentarily during the AF operation.
213 Using AF to Focus 3 Select the AF point. The AF point selection will change in the direction you tilt the < 9 >. If you press < 9 > straight down, the center AF point (or center Zone) will be selected. Y ou can also use the < 6 > and < 5 > dials to select the AF point.
214 Y ou can magnify the image and focus precisely with manual focus. 1 Set the lens focus mode switch to <MF>. T urn the lens focusing ring to focus roughly . 2 Move the magnifying frame. Use < 9 > to move the magnifying frame to the position where you want to focus.
215 Live View Shooting Cautions Image Quality When you shoot at high ISO speeds, noise (dots of light, banding, etc.) may become noticeable. Shooting in high temperatur es may cause noise and irregul ar colors in the image.
216 Live View Shooting Cautions Live View Image Under low- or bright-light conditions, the Live Vi ew image may not reflect the brightness of the captured image. If the light source within the image ch anges, the screen may flicker . If this happens, stop the Live View shooti ng and resume sh ooting under the actual light source to be used.
217 Shooting Movies Movie shooting is enabled by setting the Live View shooting/ Movie shooting switch to < k >. The movie recording format will be MOV . Cards that can record movies When shooting movies, use a la rge-capacity card with a fast writing/reading spee d as shown in the table.
218 When the shooting mode is set to < A >, < d >, or < F >, autoexposure control will take ef fect to suit the scene’s current brightness. Exposure control will be the same for the three shooting modes. 1 Set the Mode Dial to < A >, < d >, or < F >.
219 k Shooting Movies When the shooting mode is < s >, you can manually set the shutter speed for movie shooting. The ISO speed and aperture will be set automatically to suit the brightness and obtain a standard exposure. 1 Set the Mode Dial to < s >.
220 k Shooting Movies When the shooting mode is < f >, you can manually set the aperture for movie shooting. The ISO speed and shutter speed will be set automatically to suit the brightness and obtain a standard exposure. 1 Set the Mode Dial to < f >.
221 k Shooting Movies ISO speed in the A mode In the A mode, the ISO speed will be set automatically within ISO 100 - 12800. ISO speed in the d , s , f , and F modes The ISO speed will be set automatically within ISO 100 - 12800. Under [ z 2: ISO speed settings ] (p.
222 k Shooting Movies Notes for Autoexposure, Shutter-pr iority AE, and Aperture-priority AE During movie shooting in the A , d , s , f or F mode, this camera supports the function that turns the S peedlite’s LED light automatically in low-light conditions.
223 k Shooting Movies Y ou can manually set the shutter speed, aperture, and ISO speed for movie shooting. Using manual exposure to shoot movies is for advanced users. 1 Set the Mode Dial to < a >. 2 Set the Live View shooting/Movie shooting switch to < k >.
224 k Shooting Movies ISO speed during manual-exposure shooting With [ Auto ] ( A ), the ISO speed will be set automatically within ISO 100 - 12800. Y ou can set the ISO speed manually within ISO 100 - 12800 in 1/3- stop increments.
225 k Shooting Movies Each time you press the < B > button, the information display will change. * Applies to a single movie clip. Information Display Picture S tyle Recording movie AF point (Li.
226 k Shooting Movies Notes on Movie Shooting The camera cannot autofocus co ntinuously like a camcorder . Autofocusing during movi e shooting may momentar ily throw the focus far off or change the exposure. During movie shooting, do not point the lens toward th e sun.
227 k Shooting Movies Notes on Movie Shooting The final image simulation is a func tion that allows you to see the effect s of the Picture S tyle, white balance, etc., on the image. During movie shooting, the image displayed will automatically reflect the effects of the settings listed below .
228 k Shooting Movies While shooting a movie, you can also take a still photo by pressing the shutter button completely . T aking still photos during movie shooting If you take a still photo during movie shooting, the movie will record a still moment lasting approx.
229 k Shooting Movies AEB cannot be used. Even if an external S peedlit e is used, it will not fire. Continuous still photo shooting is possible during movie shooting.
230 If you press the < o >, < n >, < m >, < S >, or < b > button while the image is displayed on the LCD monitor , the setting screen will appear on the LCD moni tor and you can turn the < 6 > or < 5 > dial to set the respective function.
231 With [ z 4: Movie rec. size ], you can set the movie’s image size, frame rate per second, and compression method. The frame rate switches automatically depending on the [ 5 3: Video system ] setting. In the < A > mode, these menu options are displayed under [ z 2 ].
232 3 Setting the Movie-Recording Size About Movies Exceeding 4 GB Even if you shoot a movie exceed ing 4 GB, you can keep shooting without interruption. Approx. 30 sec. before the movie reaches the 4 GB file size, the elapsed shooting time or time co de displayed in the movie-shooting image will start blinking.
233 3 Setting the Movie-Recording Size An increase of the ca mera’s internal temperature may cause movie shooting to stop befo re the maximum recording time shown in the preceding page (p.241). Even if [ Record func. ] is set to [ Auto switch card ], the card cannot be switched automatically during movie shooting.
234 Y ou can shoot movies while recording sound with the built-in monaural microphone or a commercially-available stereo microphone. Y ou can also freely adjust the sound-recording level. Set the sound recording with [ z 4: Sound recording ]. In the < A > mode, this setting is displayed in [ z 2 ].
235 3 Setting the Sound Recording Using the microphone The built-in microphone records mo naural sound. S tereo sound recording is possible by connecti ng an external stereo microphone (commercially-available) equipped with a miniature stereo plug (3.
236 This function is convenient when you want to change the ISO speed, sound- recording level, etc., silently while shooting a movie. When [ z 5: Silent Control ] is set to [ Enable h ], you can use the touch pad < h > on the inner ring of the Quick Control Dial.
237 The time code is a time reference recorded automatically to synchronize the video and audio during movie shooting. It is recorded at all times in the following units: hours, minutes, seconds, and frames. It is mainly used during movie editing. Set the time code with [ z 5: Time code ].
238 3 Setting the Time Code Y ou can select what to display on the movie playback screen. [ Rec time ] : Displays the recording time and playback time during movie playback. [ Time code ] : Displays the time code during movie playback. If the frame rate setting is 6 (29.
239 [ z 4] Menu When the Live View shooting/Movie shooting switch is set to < k >, the [ z 4 ] and [ z 5 ] tabs dedicated to movie shooting will be displayed. The menu options are as follows. In the < A > mode, [ z 2 ] and [ z 3 ] will be displayed.
240 3 Menu Function Settings Silent L V shooting N This function applies to still photo shooting. For details, see page 206. Metering timer N Y ou can change how long the exposure setting is displayed (AE lock time). [ z 5] Menu Time code Y ou can set the time code.
241 Movie Shooting Cautions White < s > and Red < E > Internal T emperature Warning Icons If the camera’s internal temperatu re increases due to prolonged movie shooting or a high ambient temperature, a white icon < s > will appear .
242 Movie Shooting Cautions Recording and Image Quality If you use a card having a slow writing speed, a five-level indicator may appear on the righ t of the screen during movie shooting. It indicates how much data has not yet been written to the card (remaining ca pacity of the internal buf fer memory).
243 Image Playback This chapter explains how to play back and erase photos and movies, how to display them on a TV screen, and other playback-related functions. About images taken with another camera The camera may not be able to pro perly display images captured with a different camera or edited wi th a computer or whose file name was changed.
244 1 Play back the image. Press the < x > button. X The last captured image or last image viewed will appear . 2 Select an image. T o play back images starting with the last image, turn the < 5 > dial counterclockwise. T o play back images starting with the first captured image, turn the dial clockwise.
245 x Image Playback 3 Exit the image playback. Press the < x > button to exit the image playback and return to shooting-ready state. In single-image display and two-image display (p.253) display , you can overlay the grid on the image playback.
246 * When you shoot in RA W+J PEG image quality , the RA W image file size will be displayed. * During flash photography withou t flash exposure compensation, < 0 > will be displayed. * < w > and the dynamic range ad justment amount will be displayed for images taken in the HDR mode.
247 B : Shooting Information Display About the Highlight Alert When [ 3 3: Highlight alert ] is set to [ Enable ], overexposed highlight areas will blink. T o obtain more image detail in the overexposed areas, set the exposure compensation to a negative amount and shoot again.
248 B : Shooting Information Display About the Histogram The brightness histogram shows the exposure level distribution and overall brightness. The RGB histogram is for checking the color saturation and gradation. The display can be switched with [ 3 3: Histogram disp ].
249 Y ou can search for images quickly wi th the index display showing four or nine images on one screen. 1 Press the < u > button. During image playback, press the < u > button. X [ 6 u ] will be displayed on the lower right of the screen.
250 x Searching for Images Quickly With the single image display , you can turn the < 6 > dial to jump through the images forward or back according to the jump method set. 1 Select [Image jump w/ 6 ]. Under the [ 3 2 ] tab, select [ Image jump w/ 6 ], then press < 0 >.
251 Y ou can magnify a captured image by approx. 1.5x to 10x on the LCD monitor . 1 Magnify the image. The image can be magnified during image playback (single-image display), during image review after image capture, and from shooting-ready state. Press the < u > button.
252 u Magnified View Under the [ 3 3 ] tab, when you select [ Magnificatn (apx) ], you can set the starting magnification and initial position for the magnified view . 1x (no magnification) The image will not be magnified. The magnified view will start with the single-image display .
253 Y ou can compare two images side by side on the LCD monitor . 1 Set the two-image display . During image playback, press the < m > button. X T wo images will be displayed. The currently-selected image will be highlighted in a blue frame. 2 Select the images to be compared.
254 Y ou can rotate the displayed image to the desired orientation. 1 Select [Rotate image]. Under the [ 3 1 ] tab, select [ Rot ate image ], then press < 0 >. 2 Select an image. T urn the < 5 > dial to select the image to be rotated. Y ou can also select an image on the index display (p.
255 Y ou can rate images and movies with one of five rating marks: l / m / n / o / p . This function is called rating. 1 Select an image or movie. During image playback, turn the < 5 > dial to select an image or movie to be rated. Y ou can also select an image or movie on the index display (p.
256 Setting Ratings 2 Select an image or movie. T urn the < 5 > dial to select the image or movie to be rated. If you press the < u > button and turn the < 6 > dial counterclockwise, you can select an image or movie from a three-image display .
257 During playback, you can press the < Q > button to set the following: [ K : Protect images , b : Rotate image, 9 : Rating , R : RAW image processing (RA W images only), S : Resize (JPEG image only), : Highlight alert , :AF point display , e : Image jump w/ 6 ].
258 Q Quick Control During Playback T o rotate an image, set [ 5 1: Auto rotate ] to [ On z D ]. If [ 5 1: Auto rotate ] is set to [ On D ] or [ Off ], the [ b Rot ate image ] setting will be recorded to the image, but the came ra will not rotate the image for display .
259 Y ou can play back movies in the following three ways: Use the provided A V cable or an HDMI Cable HTC-100 (sold separately) to connect the camera to a TV set.
260 k Enjoying Movies The movie files recorded on the card can be transferred to a personal computer and played with ImageBrowser EX. Playback and Editing with a Personal Computer (p.394) T o have the movie play back smooth ly on a personal computer, use a high-performance personal computer .
261 1 Play back the image. Press the < x > button to display images. 2 Select a movie. T urn the < 5 > dial to select the movie to be played. With the single-image display , the < 1s > icon displayed on the upper left indicates a movie.
262 k Playing Movies Function Playback Description 2 Exit Returns to the sing le-image display . 7 Play Pressing < 0 > toggles between play and stop. 8 Slow motion Adjust the slow motion speed by turning the < 5 > dial. The slow-motion speed is in dicated on the upper right.
263 Y ou can edit out the first and last scenes of a movie in 1-sec. increments. 1 On the movie playback screen, select [ X ]. X The movie editing panel will be displayed at the bottom of the screen. 2 Specify the p art to be edited out. Select either [ U ] (Cut beginning) or [ V ] (Cut end), then press < 0 >.
264 X Editing the Movie’s First and Last Scenes 4 Save the movie. Select [ W ], then press < 0 >. X The save screen will appear . T o save it as a new movie, select [ New file ]. T o save it and overwrite the original movie file, select [ Overwrite ].
265 Y ou can play back the images on the card as an automatic slide show . 1 Select [Slide show]. Under the [ 3 2 ] tab, select [ Slide show ], then press < 0 >. 2 Select the images to be played. T urn the < 5 > dial to select the desired option, then press < 0 >.
266 3 Slide Show (Auto Playback) 3 Set the play time and repeat option. Tu r n t h e < 5 > dial to select [ Set up ], then press < 0 >. For still photos, set the [ Display time ] and [ Repeat ] options, then press the < M > button.
267 3 Slide Show (Auto Playback) 4 St art the slide show. T urn the < 5 > dial to select [ Star t ], then press < 0 >. X After [ Loading image... ] is displayed, the slide show will start. 5 Quit the slide show . T o quit the slide show and return to the setting screen, press the < M > button.
268 Y ou can view the still photos and movies on a TV set. HDMI Cable HTC-100 (sold separately) is required. 1 Connect the HDMI cable to the camera. With the plug’s < d HDMI MINI > logo facing the front of the camera, insert it into the < D > terminal.
269 Viewing the Images on TV 5 Press the < x > button. X The image will appear on the TV screen. (Nothing will be displayed on the camera’s LCD monitor .) The images will automatically be displayed at the TV’s optimum resolution. By pressing the < B > button, you can change the display format.
270 Viewing the Images on TV 2 Connect the camera to a TV set. Use an HDMI cable to connect the camera to the TV . X The TV’s input will sw itch automatically to the HDMI port connected to the camera. 3 Press the camera’ s < x > button. X An image will appear on the TV screen and you can use the TV’s remote control to play back images.
271 Viewing the Images on TV 1 Connect the provided A V cable to the camera. With the plug’s < Canon > logo facing the back of the camera, insert it into the < q > terminal. 2 Connect the A V cable to the TV set. Connect the A V cable to the TV’s video IN terminal and audio IN terminal.
272 Protecting an image prevents it from being erased accidentally . 1 Select [Protect images]. Under the [ 3 1 ] tab, select [ Protect images ], then press < 0 >. 2 Select [Select images]. Select [ Select images ], then press < 0 >. X The images will be displayed.
273 K Protecting Images Y ou can protect all the images in a folder or on a card at one time. Under [ 3 1: Protect images ], when you select [ All images in folder ] or [ All images on card ], all the images in the folder or on a card will be protected.
274 The images recorded on one card can be copied to the other card. 1 Select [Image copy]. Under the [ 3 1 ] tab, select [ Image copy ], then press < 0 >. 2 Select [Sel.Image]. Check the copy source and target card’s cap acity . T urn the < 5 > dial to select [ Sel.
275 a Copying Images 4 Select the images to be copied. T urn the < 5 > dial to select an image to be copied, then press < 0 >. X The < X > icon will appear on the upper left of the screen. If you press the < u > button and turn the < 6 > dial counterclockwise, you can select an image from a three- image display .
276 a Copying Images 8 Select [OK]. Check the copy source and target card’s information. T urn the < 5 > dial to select [ OK ], then press < 0 >. X The copying will start and the progress will be displayed. When the copying is completed, the result will be displayed.
277 Y ou can either select and erase images one by one or erase them in one batch. Protected images (p.272) will not be erased. Once an image is erased, it cann ot be recovered. Make sure you no longer need the image before erasing it. T o prevent important images from being erased accident ally , protect them.
278 L Erasing Images 2 Select [Select and erase images]. Select [ Select and erase images ], then press < 0 >. X The images will be displayed. If you press the < u > button and turn the < 6 > dial counterclockwise, you can select an image from a three-image display .
279 The LCD monitor ’s brightness is ad justed automatically for optimum viewing. Y ou can set the automatic adjustment’s brightness level (brighter or darker) or adjust the brightness manually . 1 Select [LCD brightness]. Under the [ 5 2 ] tab, select [ LCD brightness ], then press < 0 >.
280 Changing Image Playback Settings V ertical images are rotat ed automatically so they are displayed vertically on the camera’s LCD monitor and on the personal computer instead of horizontally . The setting of this feature can be changed. 1 Select [Auto rot ate].
281 Post-Processing Images Y ou can process RA W images with the camera or resize (shrink) JPEG images. A M icon at the upper right of a p age title indicates that the function can be used when the Mode Dial is set to < d / s / f / a / F >. * The function cannot be used in the < A > mode.
282 Y ou can process 1 images with the camera and save them as JPEG images. While the RA W image itself does not change, you can process the RA W image according to different conditions to create any number of JPEG images from it. Note that 41 and 61 images cannot be processed with the camera.
283 R Processing RAW Images with the Camera N Displaying the setting screen Press < 0 > to display the setting screen. T urn the < 5 > or < 6 > dial to change the setting. T o return to the screen in step 3, press < 0 >. 4 Save the image.
284 R Processing RAW Images with the Camera N Brightness adjustment Y ou can adjust the image brightness up to ±1 stop in 1/3-stop increments. The displayed image will reflect the setting’s ef fect. White balance (p.137) Y ou can select the white balance.
285 R Processing RAW Images with the Camera N Color space (p.158) Y ou can select either sRGB or A dobe RGB. Since the camera’s LCD monitor is not compatible with Adobe RGB, the image will not look very different when either color space is set. Peripheral illumination correction (p.
286 R Processing RAW Images with the Camera N Chromatic aberration correction When [ Enable ] is set, the lens’ chromatic aberrations (color fringing along the subject’s outline) can be corrected. If [ Enable ] is set, the corrected image will be displayed.
287 Y ou can resize an image to make the pixel count lower and save it as a new image. Resizing an image is possible only with JPEG 3 / 4 / a / b images. JPEG c and RA W images cannot be resized. 1 Select [Resize]. Under the [ 3 2 ] tab, select [ Resize ], then press < 0 >.
288 S Resize Resize Options According to Original Image Size The image size displayed in step 3 on the preceding page, such as [ **M ****x**** ], has a 3:2 aspect ratio. The image size according to aspect ratios is shown in the table below . The asterisked image-recording qualit y figures do not exactly match the aspect ratio.
289 Sensor Cleaning The camera has a Self Cleani ng Sensor Unit attached to the image sensor ’s front layer (low-pass filter) to shake off dust automatically . The Dust Delete Data can also be appended to the image so that the dust spot s remaining can be erased automatically by Digital Photo Professional (provided software, p.
290 Whenever you set the power switch to < 1 > or < 2 >, the Self Cleaning Sensor Unit operates to aut omatically shake off the dust on the front of the sensor . Normally , you need not pay attention to this operation. However , you can choose to perform sensor cleaning at any time, or disable it.
291 Normally , the Self Cleaning Sensor Un it will eliminate most of the dust that may be visible on captured images . However , in case visible dust still remains, you can append the Du st Delete Data to the image for erasing the dust spots later . The Dust Delete Data is used by Digital Photo Professional (provided softwa re, p.
292 3 Appending Dust Delete Data N 3 Photograph a solid-white object. At a distance of 20 cm - 30 cm (0.7 ft. - 1.0 ft.), fill the viewfinder with a patternless, solid-white object and take a picture. X The picture will be taken in aperture- priority AE mode at an aperture of f/22.
293 Dust that could not be removed by the automatic sensor cleaning can be removed manually with a blower , etc. Before cleaning the sensor , detach the lens from the camera. The surface of the image sensor is extremely delicate. If the sensor needs to be cleaned directly , having it done by a Canon Service Center is recommended.
294 3 Manual Sensor Cleaning N While cleaning the sensor , never do any of the following. Doing any of the following will cut off the power and close the shutter . The shutter curtains and image se nsor may then get damaged. • Setting the power switch to < 2 >.
295 Printing Images and Transferring Images to a Computer Printing (p.298) Y ou can connect the camera directly to a printer and print out the images on the card. The camera is compatible with “ w PictBridge” which is the standard for direct printing.
296 The direct printing procedure can be performed entirely with the camera while you look at the LCD monitor . 1 Set the camera’ s power switch to < 2 >. 2 Set up the printer . For details, refer to the printer’s instruction manual. 3 Connecting the camera to the printer .
297 Preparing to Print 6 Play back the image. Press the < x > button. X The image will appear , and the < w > icon will appear on the upper left to indicate that the camera is connected to a printer . w PictBridge Movies cannot be printed.
298 The screen display and setting options will differ depending on the printer . Some settings may not be available. For details, refer to the printer ’s instruction manual. 1 Select the image to be printed. Check that the < w > icon is displayed on the upper left of the LCD monitor .
299 w Printing Select the size of the paper loaded in the printer , then press < 0 >. X The paper type screen will appear . Select the type of the paper loaded in the printer , then press < 0 >. X The page layout screen will appear . Select the page layout, then press < 0 >.
300 w Printing 4 Set the printing effects. Set if necessary . If you do not need to set any printing effect s, go to step 5. What is displayed on the screen differs depending on the printer . Select the option, then press < 0 >. Select the desired printing effect, then press < 0 >.
301 w Printing 5 Set the date and file number imprinting. Set if necessary . Select < I >, then press < 0 >. Set as desired, then press < 0 >. 6 Set the number of copies. Set if necessary . Select < R >, then press < 0 >.
302 w Printing In step 4 on page 300, select the printing effect. When the < e > icon is displayed brightly next to < z >, you can press the < B > button. Y ou can then adjust the printing effect. What can be adjusted or what is displayed will depend on the selection made in step 4.
303 w Printing Y ou can crop the image and print only the trimmed portion as if the image was recomposed. Set the trimming right before printing. If you set the trimming and then set the print settings, you may have to set the trimming again before printing.
304 w Printing Depending on the printer , the trimmed image area may not be printed as you specified. The smaller you make the trimming fr ame, the grainier the picture will look in the print. While trimming the image, look at th e camera’s LCD monitor .
305 Y ou can set the print type, date impr inting, and file number imprinting. The print settings will be applied to all print-ordered images. (They cannot be set individually for each image.) 1 Select [Print order]. Under the [ 3 1 ] tab, select [ Print order ], then press < 0 >.
306 W Digital Print Order Format (DPOF) 4 Exit the setting. Press the < M > button. X The print order screen will reappear . Next, select [ Sel.Image ], [ By n ], or [ All image ] to order the images to be printed. Print type K S tandard Prints one image on one sheet.
307 W Digital Print Order Format (DPOF) Sel.Image Select and order images one by one. If you press the < u > button and turn the < 6 > dial counterclockwise, you can select an image from a three-image display . T o return to the single-image display , turn the < 6 > dial clockwise.
308 With a PictBridge printer , you can easily print images with DPOF . 1 Prep are to print. See page 296. Follow the “Connecting the Camera to a Printer” procedure up to step 5. 2 Under the [ 3 1] t ab, select [Print order]. 3 Select [Print]. [ Print ] will be displayed only if the camera is connected to a printer and printing is possible.
309 Y ou can connect the camera to a personal computer and operate the camera to transfer images on the card to the personal computer . This is called direct image transfer . The direct image transfer can be performed with the camera while you look at the LCD monitor .
310 d Transferring Images to a Personal Computer 3 Set the camera’ s power switch to < 1 >. When the personal computer displays a screen to select the program, select [ EOS Utility ]. X The EOS Utility screen will appear on the personal computer .
311 d Transferring Images to a Personal Computer Sel.Image 1 Select [Image transfer]. Under the [ 3 2 ] tab, select [ Image transfer ], then press < 0 >. 2 Select [Image sel./transfer]. Select [ Image sel./transfer ], then press < 0 >. 3 Select [Sel.
312 d Transferring Images to a Personal Computer 5 T ransfer the image. On the computer screen, check that EOS Utility’s top screen is displayed. Select [ Direct transfer ], then press < 0 >. On the confirmation screen, select [ OK ] and the images will be transferred to the personal computer .
313 Customizing the Camera Y ou can customize various came ra features to suit your picture-taking preferences with Custom Functions. Also, the current camera settings can be saved under the Mode Dial’s < w >, < x >, and < y > positions.
314 Selecting [ 8 4: Clear all Custom Func. (C.Fn) ] will clear all the Custom Function settings. 3 Custom Functions N 8 1: Exposure A LV Shooting k Movie Shooting Exposure level increments p.315 k k ISO speed setting increments k In a Bracketing auto cancel k (S till photo, with WB bracketing set) Bracketing sequence p.
315 Under the [ 8 ] tab, you can customize various camera features to suit your picture-taking preferences. Any settings different from the default will be displayed in blue.
316 3 Custom Function Settings N Bracketing sequence The AEB shooting sequence and white balance bracketing sequence can be changed. 0-+: 0, -, + -0+: -, 0, + +0-: +, 0, - Number of bracketed shot s The number of shots taken with AEB and white balance bracketing can be changed from the usual 3 shot s to 2, 5, or 7 shot s.
317 3 Custom Function Settings N Safety shift OFF: Disable Tv/A v: Shutter speed/Aperture This takes effect in t he shutter-priority AE ( s ) and aperture-priority AE ( f ) modes.
318 3 Custom Function Settings N C.Fn2: Disp./Operation Wa r n i n g s z in viewfinder When any of the following functions are set, the < h > icon can be displayed on the viewfinde r’s bottom right (p.23). Select the function for which you want the warning icon to appear , press < 0 > to append a < X >, then select [ OK ].
319 3 Custom Function Settings N Dial direction during Tv/A v Normal Reverse direction The dial’s turning direction for setting the shutter speed and aperture can be reversed. In the < a > shooting mode, the turning direction of the < 6 > and < 5 > dial will be reversed.
320 3 Custom Function Settings N C.Fn3: Others Add cropping information If you set cropping information, vertical lines for the aspect ratio you have set will appear on the Live View imag e. Y ou can then compose the shot as if you were shooting with a medium- or large-format camera (6x6 cm, 4x5 inch, etc.
321 Y ou can assign frequently-used functi ons to camera buttons or dials according to your preferences. 1 Select [ 8 2: Custom Controls]. Under the [ 8 2 ] tab, select [ Custom Controls ], then press < 0 >. X The Custom Controls screen will appear .
322 8 2: Custom Controls Assignable Functions to Camera Controls Function Page Metering and AF start 324 k k * 1 k * 1 AF stop 325 kk Switch to registered AF function ONE SHOT z AI SERVO Switch to reg.
323 8 2: Custom Controls * The AF stop button ( ) is provided only on su per telephoto IS lenses. * k kk k * 2 k * 2 k k k * 3 k * 3 k k * 4 kkk k k k k k k k kk k k k * 5 k * 5 k * 5 k * 5 k k k k k .
324 8 2: Custom Controls When you press the button assigned to this function, metering and AF are executed. *1: If you assign the [ Metering and AF start ] function to the < p > and < A > buttons and add the function to switch to the registered AF point, you can instantly switch to the registered AF point.
325 8 2: Custom Controls The AF will stop while you hold do wn the button assigned to this function. Convenient when you want to lock the focus during AI Servo AF . After setting AF area selection mode (p.72), T racking sensitivity (p.90), Acceleration/deceleration tracking (p.
326 8 2: Custom Controls During metering, when you press th e button assigned to this function, the camera will switch to the AF point registered on page 324. *3: In step 3 on page 321, when you press the < B > button, you can select [ Switch only when btn is held ] or [ Switch each time btn is pressed ].
327 8 2: Custom Controls During flash photography , pressing the button assigned to this function will fire a preflash and record the required flash output (FE lock). Y ou can set the ISO speed by holding down < 0 > and turning the < 6 > dial.
328 8 2: Custom Controls When you press the button assigned to this function, you can switch to the image-recording quality set here. While the camera switches the image-recording quality , the image -recording quality will blink on the LCD panel.
329 8 2: Custom Controls When you press the depth-of-field preview button, the aperture will stop down and you can check the depth of field (p.165). With the lens’ IS switch set to < 1 >, the lens’ Image S tabilizer operates when you press the button assigned to this function.
330 8 2: Custom Controls Pressing < 0 > will display the menu on the LCD monitor . Pressing < 0 > will play back images. Press < 0 > to magnify the images recor ded on the card.
331 Under the My Menu tab, you can regi ster up to six menu options and Custom Functions whose settings you change frequently . 1 Select [My Menu settings]. Under the [ 9 ] tab, select [ My Menu settings ], then press < 0 >. 2 Select [Register to My Menu].
332 Y ou can register current camera settings, such as the shooting mode, menu functions, and Custom Functi on settings, as Custom shooting modes under the Mode Dial’s < w >, < x >, and < y > positions. 1 Select [Custom shooting mode (C1-C3)].
333 w Register Custom Shooting Modes N Shooting functions Shooting mode + exposure setting, ISO speed, AF mode, AF area selection mode, AF point, Metering mode, Drive mode, Exposure compensation amoun.
334 w Register Custom Shooting Modes N [ x 2 ] Slide show , Image jump with 6 [ x 3 ] Highlight alert, AF point disp., Playback grid, Histogram display , Movie play count, Magnificatn (approx.
335 Reference This chapter provides refere nce information for camera features, system accessories, etc. C OP Y.
336 When you press the < B > button while the camera is ready to shoot, you can display [ Displays camera settings ], [ Electronic level ] (p.60), and [ Displays shooting functions ] (p.337). Under the [ 5 3 ] tab, [ z button display options ] enables you to se lect the options displayed when the < B > button is pressed.
337 B Button Functions Pressing the < Q > button enables Quick Control of the shooting settings (p.49). If you press the < m >, < o >, < n >, or < S > button, the respective setting screen will appear on the LCD monitor and you can turn the < 6 > or < 5 > dial to set the function.
338 Y ou can check the battery’s condition on the LCD monitor . Each Battery Pack LP-E6 has a unique serial number , and you can register multiple battery packs to the camera. When you use this feature, you can check the registered battery pack’s remain ing cap acity and operation history .
339 3 Checking the Battery Information Y ou can register up to six LP-E6 battery packs to the camera. T o register multiple battery packs to the camera, do the procedure below for each battery pack. 1 Press the < B > button. With the battery info.
340 3 Checking the Battery Information Affixing a serial number label onto all the registered Battery Pack LP- E6’s makes it convenient. 1 Write the serial number on a label. Write the serial number displayed on the battery history screen on a commercially-available label approx.
341 3 Checking the Battery Information Y ou can check the remaining capaci ty of any battery pack (even when not installed) and also when it was last used. Look for the serial number . Refer to the battery’s serial number label and look for the battery’s serial number on the battery history screen.
342 With the AC Adapter Kit ACK-E6 (s old separately), you can connect the camera to a household power outle t and not worry about the remaining battery level. 1 Connect the DC Coupler ’s plug. Connect the DC Coupl er ’s plug to the AC Adapter ’s socket.
343 The date/time (backup) battery ma intains the camera’ s date and time. Its service life is approx. 5 years. If the date/time is reset when camera is turned on, follow the procedure below to replace the backup battery with a new CR1616 lithium battery .
344 With a commercially-available Eye- Fi card already set up, you can automatically transfer captured images to a personal computer or upload them to an online service via a wireless LAN.
345 Using Eye-Fi Cards 5 Check the [Access point SSID:]. Check that an access point is displayed for [ Access point SSID: ]. Y ou can also check the Eye-Fi card’s MAC address and firmware version. Press the < M > button to exit the menu. 6 T ake the picture.
346 o : Set automatically k : User selectable : Not selectable/Disabled *1: The z icon indicates still photo shooti ng in the movie shooting mode. *2: If used during movie shoo ting, it will switch to d .
347 Function Availability Table According to Shooting Mode *3: In the < a > mode with Auto ISO, yo u can set a fixed ISO speed. *4: Works only before the start of movie shooting.
348 z : Shooting 1 (Red) Page Menu Settings For Viewfinder Shooting and Live View Shooting Image quality 1 / 41 / 61 11 9 73 / 83 / 74 / 84 / 7 a / 8 a / b / c Image review Off / 2 sec.
349 Menu Settings z : Shooting 2 (Red) Page * During movie shooting, [ Expo.comp./AEB ] will be [ Exposure comp. ]. z : Shooting 3 (Red) * For movie shooting, [ Multiple exposure ] and [ HDR Mode ] cannot be selected (grayed out).
350 Menu Settings z : Shooting 4* (Red) Page * In the < A > mode, these menu options are displayed under [ z 2 ]. 2 : AF1 (Purple) 2 : AF2 (Purple) Live View shooting Enable / Disable 203 AF mod.
351 Menu Settings 2 : AF3 (Purple) Page 2 : AF4 (Purple) 2 : AF5 (Purple) USM lens electronic MF Enable after One-Shot AF / Disable after One- Shot AF / Disable in AF mode 96 AF-assist beam firing Ena.
352 Menu Settings 3 : Playback 1 (Blue) Page 3 : Playback 2 (Blue) 3 : Playback 3 (Blue) * The setting is linked to the [ Time co de ]’s [ Movie play count ] under the [ z 5 (Movie) ] tab.
353 Menu Settings 5 : Set-up 1 (Y ellow) Page 5 : Set-up 2 (Y ellow) *I f [ GPS device setting ] is not displayed, upda te the camera firmware. Record function+card/ folder selection [ Record func.
354 Menu Settings 5 : Set-up 3 (Y ellow) Page 5 : Set-up 4 (Y ellow) 8 : Custom Functions (Orange) 9 : My Menu (Green) Video system NTSC / P AL 231 271 Battery info.
355 Menu Settings z : Shooting 4* 1 (Movie) (Red) Page *1: In the < A > mode, these menu option s are displayed under [ z 2 ]. *2: In the < A > mode, it will be [ Sound recording ]: [ On/Off ]. z : Shooting 5* 1 (Movie) (Red) *1: In the < A > mode, these menu option s are displayed under [ z 3 ].
356 System Map Date / time CR1616 lithium battery Wide Strap EW-EOS5DMKIII Bundled Accessories Battery Pack LP-E6 Battery Grip BG-E11 Battery Charger LC-E6 or LC-E6E Hand Strap E2 ST -E2 270EX II 320E.
357 System Map Headphones GPS Receiver GP-E2 CF card SD/SDHC/SDXC memory card Card reader Ethernet port USB port Wireless LAN adapter EF lenses Timer Remote Controller TC-80N3 Wireless Controller LC-5 PictBridge-compatible printer TV/Video Wireless LAN access point External microphone Stereo A V Cable A VC-DC400ST (1.
358 If a problem occurs with the camera, first refer to this T roubleshooting Guide. If this T roubleshooting Guide does not resolve the problem, contact your dealer or nearest Canon Service Center . If the battery’s remaining cap acity (p .338) is 94% or higher , the battery will not be recharged.
359 Troubleshooting Guide If the power is turned off while an image is being recorded to the card, the access lamp will remain on/con tinue to blink for a few seconds. When the image recording is comple ted, the power will turn off automatically . Use a fully-charged battery pack (p.
360 Troubleshooting Guide The camera cannot be used wi th EF-S lenses (p.39). Install a recharged battery pa ck in the camera (p.28). The card is not properly inserted (p.31). If you are using an SD card, slide the card’s write-protect switch to the Write/Erase setting (p.
361 Troubleshooting Guide Set the lens focus mode switch to < AF > (p.39). T o prevent camera shake, press t he shutter button gently (p.43, 44). If the lens has an Image S tabilizer , set the IS switch to < 1 > (p.42). In low light, the shutter speed may become slow .
362 Troubleshooting Guide If you shoot something that has fine detail (such as a field of grass), the file size will be larger and the actual maximum burst may be lower than the number ment ioned on page 121.
363 Troubleshooting Guide If you shoot at night when the back ground is dark, the shutter speed becomes slow automatically (slow-sync shooting) so that both the subject and background are properly exposed. T o prevent a slow shutter speed, under [ z 1: External Speedlite control ], set [ Flash sync.
364 Troubleshooting Guide It indicates that the camera’s intern al temperature is high. If the white < > icon displayed, the still photo’s image quality may deteriorate. If the red < E > icon is displayed, it indicates that the Live View or movie shooting will soon be terminated automatically (p.
365 Troubleshooting Guide If you shoot a movie when [ Maximum: 25600 ] is set with [ ISO speed range ] and ISO speed is set to ISO 16000/20000/25600, the ISO speed will switch to ISO12800 ( during movie shooting with manual exposure). Even if you switch back to still photo shooting, the ISO speed will not revert to the original setting.
366 Troubleshooting Guide T o shoot still photos during mo vie shooting, us ing a CF card compatible with UDMA transfer rates is recommended. Setting a lower image quality fo r still photos and shooting fewer continuous still photos can also resolve the problem.
367 Troubleshooting Guide With [ 5 1: File name ], select the camera’s unique file name or the file name registered under User setting 1 (p.152). If the card already contains re corded images, the image number may not start from 0001 (p.154). The correct date and time has not been set (p.
368 Troubleshooting Guide [ Eye-Fi settings ] will appear only when an Eye-Fi card is inserted into the camera. If the Eye-Fi card has a write-protect switch set to the LOCK position, you will not be abl e to check the card’s connection status or disable Eye-Fi card transmission (p.
369 Troubleshooting Guide Use the stereo A V cable that ca me with the camera (p.271). Make sure the stereo A V cable or HDMI cable’s plug is inserted all the way in (p.268, 271). Set the video OUT system (NTSC/P AL) to the same video system as the TV set (p.
370 Troubleshooting Guide If you selected [ Clean now f ], the shutter will make a noise, but no picture is taken (p.290). If you repeatedly turn the power switch < 1 > and < 2 > at a short interval, the < f > icon may not be displayed (p.
371 If there is a problem with the camera, an error message will appear . Follow the on- screen instructions. * If the error still persists, write down the error number and contact your nearest Canon Service Center . Error Codes No. Error Message & Solution 01 Communications between the camera and lens is faulty .
372 •T y p e T ype: Digital, single-lens reflex, AF/AE camera Recording media: CF card (Type I, UDM A mode 7-compatible), SD memory card, SDHC memory ca rd, SDXC memory card Image sensor size: A pprox.
373 Specifications Noise reduction: Applicable to long exposures and hi gh ISO speed shots Automatic image brightness correction: Auto Lighting Optimizer Highlight tone priority: Provided Lens aberrat.
374 Specifications AF fine adjustment: AF Microadjustmen t (All lenses by same amount or Adjust by lens) AF-assist beam: Emitted by the EO S-dedicated external S peedlite • Exposure Control Metering modes: 63-zone TT L full-aperture metering Evaluative metering (l inked to all AF points) Partial metering (approx.
375 Specifications •S h u t t e r T ype: Electronically-control led, focal-plane shutter Shutter speeds: 1/8000 sec. to 30 sec ., bulb (T otal shutter speed range.
376 Specifications • Live View Shooting Aspect ratio settings : 3:2, 4:3, 16:9, 1:1 Focus modes: Live mode, Face detection Live mode (contrast detection), Quick mode (phase-diffe rence detection), Manual focusing (Approx.
377 Specifications Metering range: EV 0 - 20 (at 23°C/73°F with EF 50mm f/1.4 USM lens, ISO 100) Exposure control: 1. Autoexposure, 2. Shutter-priority AE, 3. Aperture- priority AE, 4. Manual exposure * With 1, 2, and 3, exposure compensation and AE lock are possible (except in Sc ene Intelligent Auto mode).
378 Specifications Image rotate: Possible Ratings: Provided Movie playback: Enabled (LCD monito r , video/audio OUT , HDMI OUT), built-in speaker Slide show: All images, by date, by folder , movies , .
379 Specifications Wireless remote control : Remote Controller RC-6 Eye-Fi card: Compatible •P o w e r Battery: Battery Pack LP-E6 (Quantity 1) * AC power can be supplied via AC Adapter Kit ACK-E6. * With Battery Grip BG-E1 1 attached, size-AA/LR6 batteries can be used.
380 Specifications • Battery Charger LC-E6 Compatible battery: B attery Pack LP-E6 Recharging time: Approx. 2 hr . 30 min. Rated input: 100 - 24 0 V AC (50/60 Hz) Rated output: 8 .4 V DC / 1.2 A Working temperature range: 5°C - 40°C / 41°F - 104°F Working humidity: 85% or less Dimensions (W x H x D):Approx.
381 Specifications All the data above is base d on Canon’s testing st and ards and CIP A (Camera & Imaging Products Association) testing standards and guidelines. Dimensions, maximum diameter , length and weight listed ab ove are based on CIP A Guidelines (except weig ht for camera body only).
382 Use of genuine Canon accessories is recommended This product is designed to achieve excellent perf ormance when used with genuine Canon accessories. Canon shall not be liable for any damage to this product and/or accidents such as fire, etc., caused by the malfunction of non- genuine Canon accessories (e.
383 Safety Warnings Follow these safe guards and use the eq uipment properly to pr event injury , death, and material damage. Preventing Serious Injury or Death • T o prevent fire, excessive heat, c.
384 • If you drop the equipment and the casing br eaks open to expose the internal parts, do not touch the internal parts due to the possibility of electrical shock. • Do not disassemble or modify the equipment. High-voltage internal part s can cause electrical shock.
385 Digital Camera Model DS126321 Systems This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1 ) This device may not ca use harmful interference, and (2) this device mu st accept any interference received, including interference that may ca use undesired operation.
386 IMPORT ANT SAFETY INSTRUCTIONS 1. SA VE THESE INSTRUCTIONS — This manual contai ns important safety and operating instructions for Battery Charger LC-E6 & LC-E6E. 2. Before using the charger, read all in structions and cautionary remarks on (1) the charger , (2) the ba ttery pack, and (3) the pro duct using the battery pack.
387 MEMO C OP Y.
388 MEMO C OP Y.
389 MEMO C OP Y.
390 MEMO C OP Y.
391 MEMO C OP Y.
392 MEMO C OP Y.
393 Software Start Guide This chapter gives an overvi ew of the software in the EOS DIGIT AL Solution Disk (CD-ROM) provided with the camera and explains how to install the software on a personal computer . It also ex plains how to view the PDF files in the Software In struction Manual CD-ROM.
394 EOS DIGITAL Solution Disk This disk contains various software for EOS DIGIT AL cameras. With the camera connected to a personal computer , EOS Utility enables you to transfer still phot os and movies shot with the camera to the computer .
395 Software Start Guide 1 Insert EOS DIGIT AL So lution Disk (CD-ROM). For Macintosh, double-click to open the CD-ROM icon displayed on the desktop, then double-click on [ Canon EOS Digital Installer ]. 2 Click [Easy Installation] and follow the on-screen instructions to inst all.
396 Software Start Guide Software Instruction Manual Contains the Sof tware Instruction Manuals. 1 Insert the [Sof tware INSTRUCTION MANUAL] CD-ROM into your computer . 2 Double-click the CD-ROM icon. For Windows, the icon is displayed in [ (My) Computer ].
397 Index 10-sec. or 2-sec. delay.................. 113 1280x720 ................. .....................231 1920x1080 ........... .........................231 4- or 9-image inde x display ........... 249 61-point automatic selection AF ......... .....
398 Index Camera shake ....... ................... 42, 43 Card .................................... 1 5, 31, 53 Card reminder ............................ 32 Format ............... ......................... 53 Low-level format ........................
399 Index First-curtain synchronization .........194 Flash (S peedlite) Custom Functions..................... 196 External S peedlit e..................... 188 FE lock................. ..................... 188 Flash control .... .....................
400 Index Image-recording quality ................ 119 Index display .......... ....................... 249 INFO. button ......... 20 0, 225, 244, 336 IPB ......................... ....................... 231 ISO speed .................. ... 124, 221, 224 Automatic setting (Auto) .
401 Index Metering timer ...... .................206, 240 MF (Manual focusing ) ...........111, 214 M-Fn................. .......................73, 323 Microadjustment... .........................104 Microphone .............. .............218, 235 Mirror lockup .
402 Index Power Auto power off ............... ............. 55 Battery check......... ............. 35, 338 Battery info ........ ....................... 338 Household power ..................... 342 Possible shots ....... ..... 35, 121, 199 Recharge .
403 Index Silent shooting Continuous shoo ting ................. 112 Silent L V shooti ng ............. 206, 240 Single shooting .........................112 Single image display .....................244 Single shooting .... ......................... 112 Single-point AF .
CPH-E002-001 © CANON INC. 2012 The lenses and accessories mentioned in this Instruction Manual are current as of April 2012. For information on the camera’s compatibility with any lenses and accessories introduced after this date, contact any Canon Service Center .
Ein wichtiger Punkt beim Kauf des Geräts Canon 5260B054 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Canon 5260B054 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Canon 5260B054 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Canon 5260B054 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Canon 5260B054 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Canon 5260B054 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Canon 5260B054 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Canon 5260B054. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Canon 5260B054 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
