Benutzeranleitung / Produktwartung ADAM-4570 des Produzenten Advantech
Zur Seite of 72
ADAM-4570/ADAM-4571/EDG-4504 1/2/4 P or t Ethernet to RS-232/422/485 Data Gateway User’ s Manual.
Copyright Notice This document is copyrighted, 2001, by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd., reserves the right to make improve- ments to the products described in this manual at any time without notice.
Advantech Customer Services Each and every Advantech product is built to the most exacting specifications to ensure reliable performance in the unusual and demanding conditions typical of industrial environments.
Product W arranty Advantech warrants to you, the original purchaser , that each of its products will be free from defects in materials and workmanship for two years from the date of purchase.
product returned without dated proof of purchase is not eligible for warranty service. 5 . W rite the RMA number visibly on the outside of the package and ship it prepaid to your dealer .
Contents Chapter 1: Overview ........................................ 1 1. 1 Introduction ..................................................................... 2 1 . 2 Features ..........................................................................
3. 2 Configuring the ADAM-4570/ADAM-4571/EDG-4504 The Configuration Utility ............................................. 3 3 3.2.1 Search for Specific ADAM-4570/ADAM-4571/EDG-4504 3 4 3.2.2 System Configuration ...................................
Figures Figure 2-1 Installation Flow Chart ............................................................. 1 0 Figure 2-2 Network Architecture(1) ......................................................... 1 2 Figure 2-3 Network Architecture(2) ..........
Figure 3-8 ArchitectureHost idle switch mode .................................... 4 2 Figure 3-9 Security configuration ............................................................. 4 7 Figure 3-10 Status messages ..................................
T ables T able 2-1 ADAM-4570 LED Definition ...................................................... 1 3 T able 2-2 ADAM-4571 LED Definition ...................................................... 1 5 T able 2-3 EDG-4504 LED Definition ..................
1 Chapter Overview.
1.1 Introduction The ADAM-4570/ADAM-4571/EDG-4504 is a light- ning fast and cost effective data gateway between RS- 232/422/485 and Ethernet interfaces.
space and software development cost. The ADAM- 4570/ADAM-4571/EDG-4504 also provides a high- performance RISC CPU and real time operating sys- tem to reduce CPU load.
4 ADAM-4570/ADAM-4571/EDG-4504 User ’ s Manual the serial device or communication between the device and the ADAM-4570 fails, the “Device Idle” function will switch the communication port from one port to another port to keep com- municating with another device automatically .
Chapter 1 Introduction 5 is divided into two parts: Signal test and Communication Param- eters test. If the results are OK, users can be sure the communi- cation quality between host PC and ADAM-4570/ 4571 is OK.
6 ADAM-4570/ADAM-4571/EDG-4504 User ’ s Manual 1.3 Specifications • Protocol: TCP/IP • Network Port: IEEE 802.3, IEEE 802.3u • Interface: Network: 10/100 BASE-T standard Serial: RS-232, RS-422.
Chapter 1 Introduction 7 • Power Consumption: 3.5 W att (ADAM-4571) 4 W att (ADAM-4570) 4.5 W att (EDG-4504) • Placement: DIN-rail, panel mounting, piggyback stack (ADAM-4570/4571) DIN-rail, panel.
8 ADAM-4570/ADAM-4571/EDG-4504 User ’ s Manual.
2 Getting Started Chapter.
10 ADAM-4570/ADAM-4571/EDG-4504 User ’ s Manual In this chapter , you will be given an overview of the ADAM-4570/ADAM-4571/EDG-4504 hardware installation procedures. As mentioned in the previous chapter , the ADAM-4570/ADAM-4571/EDG-4504 comes ready for all network connections, including Ethernet, and RS-232/422/485 port connections.
Chapter 2 Getting Started 1 1 2.1 Understanding the ADAM-4570/ADAM-4571/EDG-4504 The ADAM-4570/ADAM-4571/EDG-4504 is an advanced data gateway unit. It extends traditional COM ports of a PC with access over a TCP/IP network. Through networking, you can control and monitor remote serial devices either over a LAN or over the W AN.
12 ADAM-4570/ADAM-4571/EDG-4504 User ’ s Manual The following illustration shows the network architecture as be- low: Figure 2-2 Network Architecture(1) Figure 2-3 Network Architecture(2).
Chapter 2 Getting Started 1 3 L E D C o l or St at u s De s c r ip ti on St at u s/ Po w er R ed ON H eartbea t ( 1 ti m e/ sec) OFF No t wo rki ng G r een ON Pow e r ON OFF P ow e r O F F Sp eed/L i .
14 ADAM-4570/ADAM-4571/EDG-4504 User ’ s Manual Figure 2-6 ADAM-4570—Back Panel Figur e 2-4 ADAM-4570—T op Panel Figure 2-5 ADAM-4570—Front Panel.
Chapter 2 Getting Started 1 5 2.1.2.2 ADAM-4571 There are four LEDs located on the top panel of ADAM-4571, each with its own specific function. T able 2-2 ADAM-4571 LED Definition L E D Col or Statu s.
16 ADAM-4570/ADAM-4571/EDG-4504 User ’ s Manual Figure 2-9 ADAM-4571—Back Panel Figur e 2-7 ADAM-4571—T op Panel Figure 2-8 ADAM-4571—Front Panel.
Chapter 2 Getting Started 1 7 2.1.2.3 EDG-4504 There are 13 LEDs located on the top panel of EDG-4504, each with its own specific function. T able 2-3 EDG-4504 LED Definition L E D Stat u s De s cr ip.
18 ADAM-4570/ADAM-4571/EDG-4504 User ’ s Manual Figur e 2-10 EDG-4504—T op Panel Figur e 2-1 1 EDG-4504—Fr ont Panel Figure 2-12 EDG-4504—Front Panel.
Chapter 2 Getting Started 1 9 2.1.3 Stickers If you forgot the IP addresses of specific ADAM-4570/ADAM- 4571/EDG-4504s or where the host PC is mapped to the ADAM-4570 port, we have provided five stickers for you to note the IP addresses and place in a secure location.
20 ADAM-4570/ADAM-4571/EDG-4504 User ’ s Manual 2.2 Connecting the Hardware Next, we will explain how to find a proper location for your EDG COMPort series, and then explain how to connect to the network, hook up the power cable, and connect to the ADAM- 4570/ADAM-4571/EDG-4504’ s serial port.
Chapter 2 Getting Started 2 1 Figure 2-13 Panel Mounting Panel Mounting The ADAM-4570/ADAM-4571 can be attached to a wall us- ing the included metal brackets. Each bracket comes with four screws; first attach the brackets to the bottom of the ADAM- 4570/ADAM-4571.
22 ADAM-4570/ADAM-4571/EDG-4504 User ’ s Manual Figure 2-14 Din Rail Mounting DIN Rail Mounting Y ou can mount the ADAM-4570/ADAM-4571 on a standard DIN Rail. First, using two screws, attach the metal plate to the DIN Rail bracket. Because the screw heads are beveled, the tops of the screws will be flush with the metal plate.
Chapter 2 Getting Started 2 3 Piggyback Stack ADAM-4570/ADAM-4571 can be stacked as seen in the fig- ure below . Figure2-15 Piggyback Stack.
24 ADAM-4570/ADAM-4571/EDG-4504 User ’ s Manual 2.2.1.2 EDG-4504 Figure 2-17 Panel Mounting Figure 2-16 Din Rail Mounting.
Chapter 2 Getting Started 2 5 2.2.2 Network Connection There are two ways to use the 10/100Base-T Ethernet connec- tor located on the ADAM-4570/ADAM-4571/EDG-4504 : 1.
26 ADAM-4570/ADAM-4571/EDG-4504 User ’ s Manual 2.2.3 Power Connection Y ou should take the following steps to connect ADAM-4570/ ADAM-4571/EDG-4504 power .
Chapter 2 Getting Started 2 7 2.2.4 Serial Connection 2.2.4.1 ADAM-4570/4571 The model of the ADAM-4570/4571 that you purchased has RJ-48 serial ports on the bottom of module. Depending on your serial device and serial interfaces, there are two options: 1.
28 ADAM-4570/ADAM-4571/EDG-4504 User ’ s Manual RJ-48 DB-9 P I N N am e DC D RX T X DT R G ND DSR R T S C T S RI R J- 48 1 2 3 4 5 6 7 8 9.
Chapter 2 Getting Started 2 9 2.2.4.2 EDG-4504 The model of the EDG-4504 that you purchased has DB-9 se- rial ports on the bottom of module. Depending on your serial device and serial interfaces, there are two options: 1. For an RS-232/422/485 port you may use a DB-9 cable to connect your serial device to the EDG-4504.
30 ADAM-4570/ADAM-4571/EDG-4504 User ’ s Manual.
3 Installation and Configuration Chapter.
32 ADAM-4570/ADAM-4571/EDG-4504 User ’ s Manual 3.1 Driver and Utility Installation In order to use a PC via an Ethernet network to control serial devices connected to the ADAM-4570/ADAM-4571/EDG- 4504, you must first have a host running W indows 95/98/ME/ NT/2000/XP .
Chapter 3: Installation and Configuration 33 è è 6. The configuration utility will search for the ADAM-4570/ ADAM-4571/EDG-4504 devices on your local network.
34 ADAM-4570/ADAM-4571/EDG-4504 User ’ s Manual Figure 3-2 Locate all ADAM-4570/ADAM-4571/EDG-4504 1. Select “Designated” and select “ADAM-4570” 2.
Chapter 3: Installation and Configuration 35 3. The “Status” LED of all ADAM-4570s on the LAN will turn on 4. It’ s the same way to locate one device.
36 ADAM-4570/ADAM-4571/EDG-4504 User ’ s Manual 3.2.2 System Configuration Figur e 3-5 System Setting W indow Configuration utility can only search the ADAM-4570/ADAM- 4571/EDG-4504 devices on the local network segment and cannot sear ch beyond a r outer or gateway .
Chapter 3: Installation and Configuration 37 Device Name Configuration utility provides a default name for device to distin- guish a specific ADAM-4570/ADAM-4571/EDG-4504 from other ADAM-4570/ADAM-4571/EDG-4504. Y ou can update the default device name based on your application.
38 ADAM-4570/ADAM-4571/EDG-4504 User ’ s Manual 3.2.3 Network Configuration MAC Address This does not need configuration. Link Speed This function will show the current linking speed to be either 10Mbps or 100Mbps.
Chapter 3: Installation and Configuration 39 Figur e 3-7 Por t Configuration W indow 3.2.4 Port Configuration IP address, Subnet Mask, Default Gateway The IP address identifies your ADAM-4570/ADAM-4571/ EDG-4504 device on the global network. Each ADAM-4570/ ADAM-4571/EDG-4504 has same default IP address 10.
40 ADAM-4570/ADAM-4571/EDG-4504 User ’ s Manual Name T o specify which port on the ADAM-4570/ADAM-4571/EDG- 4504 is to be connected to the serial device. Description Y ou can give more detailed description of the function of the port for easy management and maintenance.
Chapter 3: Installation and Configuration 41 3.2.4.1 Host/Device Idle Protection (ADAM-4570 only) When building up a system, users sometimes face the following problems. The system crashes because the serial/Host device breaks down; the application program fails or the cable between the host device and the ADAM-4570 breaks etc.
42 ADAM-4570/ADAM-4571/EDG-4504 User ’ s Manual E t h ernet P L C o r A D A M H o s t A H o s t B A D A M -457 0 1. Users set up the time period that the ADAM-4570 waits for the host PC to send commands. 2. If the time is over the set time, the ADAM-4570 will cut the connection between host A and the ADAM-4570.
Chapter 3: Installation and Configuration 43 Configuration Steps 1. Select “Host Idle” mode. 2. Key-in the T iming. The “T iming” is the time that the ADAM-4570 will wait to receive commands from the host PC.
44 ADAM-4570/ADAM-4571/EDG-4504 User ’ s Manual 3. Make sure that Host B is in the authority list. Device Idle Switch Mode When the serial device or communication between the device and the ADAM-4570 fails, the data can not be sent to the host PC in the set time period.
Chapter 3: Installation and Configuration 45 E t h e r n e t ADAM - 45 70 P o r t 1 P o r t 2 D e v ic e A T h e C O M 2 5 o f h o s t P C r ecei ves the d at a D evic e B 5.
46 ADAM-4570/ADAM-4571/EDG-4504 User ’ s Manual Configuration Steps 1. Select “Device Idle” mode. 2. Key-in the T iming. The “T iming” is the period of time that the ADAM-4570 will wait to receive data from the serial device.
Chapter 3: Installation and Configuration 47 3.2.5 Security Configuration Figure 3-9 Security configuration Only configure the authorized IP This option is enabled in order to protect all configuration settings from being changed inadvertently .
48 ADAM-4570/ADAM-4571/EDG-4504 User ’ s Manual 3.3 Status Messages The status message shown at the bottom of the utility window reflects the current status of ADAM-4570/ADAM-4571/EDG- 4504. “Read” The configuration utility has found the ADAM-4570/ADAM- 4571/EDG-4504 and it is ready for use.
Chapter 3: Installation and Configuration 49 “Device Ready” The ADAM-4570/ADAM-4571/EDG-4504 is ready to be configured and is now waiting for acknowledgement from the device. “Lost Connection from the Device” Due to device shut down or network failure, the configuration utility has lost connection after 5 seconds.
50 ADAM-4570/ADAM-4571/EDG-4504 User ’ s Manual at the remote site to check and see if the power is on, and make sure that the connection is okay . 3.4 Port Mapping Utility The purpose of the port mapping utility is to help you manage all ports which are in one W indows NT or W indows 2000 plat- form.
Chapter 3: Installation and Configuration 51 Note: If you assigned different COMport to the same ADAM- 4570’ s port. The dialog box will appear to remind you. 4. The port has been added into ADAM-4570/ADAM-4571/ EDG-4504 5. If you want to remove the COMport, click DELETE to re- move this.
52 ADAM-4570/ADAM-4571/EDG-4504 User ’ s Manual 6. After you complete the configuration, click ”Apply”. 3.4.1 Self T est Function The purpose of this test is to make sure the communication from host PC to ADAM -4570 is OK.
Chapter 3: Installation and Configuration 53 1. Click the T est button in the Port Mapping utility . Signal T est • R TS CTS: Check the R TS and CTS signals between two ports. • DTR RI: Check the DTR and RI signal between two ports. • DTR DSR: Check the DTR and DSR signal between two ports.
54 ADAM-4570/ADAM-4571/EDG-4504 User ’ s Manual 2. Click OK button to return to the port mapping window . All the ports in the ADAM-4570/ADAM-4571/EDG-4504 are tested ok.
Chapter 3: Installation and Configuration 55 1. Click on the toolbar Update FW icon. Figure 3-16 Update firmware window 2. Locate and then select the filename of the firmware that you downloaded.
56 ADAM-4570/ADAM-4571/EDG-4504 User ’ s Manual 3. After downloading firmware completely , click on the Reboot button. The ADAM-4570/ADAM-4571/EDG-4504 will re- start automati cally .
Chapter 3: Installation and Configuration 57 3.4.3 Save The Configuration If you want to save or recover the configuration, you can select the “Import/Export” items.
58 ADAM-4570/ADAM-4571/EDG-4504 User ’ s Manual 3.4.4 Auto-reconnect function Sometimes, the system crashes because the ADAM-4570 is in- terrupted or is powered-off by accident. Users want the host PC to re-connect to the ADAM-4570 automatically after such an occurrence.
4 T r oub leshooting Chapter.
58 ADAM-4570/ADAM-4571/EDG-4504 User ’ s Manual This chapter explains how to solve some of the most common problems you could encounter while using ADAM-4570/ ADAM-4571/EDG-4504. If you are still having problems after reading this chapter , contact your dealer , or e-mail Advantech for help.
Chapter 4 Troubleshooting 59 For security reasons, and to simplify operations, users can give the access right to specific PC. Only these PCs can get data from ADAM-4570/ADAM-4571/EDG-4504. Thus, if while using the ADAM-4570/ADAM-4571/EDG-4504, it is advised that you check to see if your PC is on the access right list.
60 ADAM-4570/ADAM-4571/EDG-4504 User ’ s Manual.
Ein wichtiger Punkt beim Kauf des Geräts Advantech ADAM-4570 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Advantech ADAM-4570 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Advantech ADAM-4570 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Advantech ADAM-4570 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Advantech ADAM-4570 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Advantech ADAM-4570 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Advantech ADAM-4570 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Advantech ADAM-4570. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Advantech ADAM-4570 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
