Benutzeranleitung / Produktwartung HSIM-G01 des Produzenten Cabletron Systems
Zur Seite of 36
HSIM-G01/G09 User’ s Guide HSIM-G LNK SX 9032398-04.
.
HSIM-G01/G09 User’ s Guide i NOTICE Cabletron Systems reserves the right to make changes in specifications and other information contained in this document without prior notice. The reader should in all cases consult Cabletron Systems to determine whether any such changes ha ve been made.
Notice ii HSIM-G01/G09 User’ s Guide INDUSTRY CANADA NOTICE This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.
Notice HSIM-G01/G09 User’ s Guide iii CABLETRON SOFTWARE PROGRAM LICENSE 1. LICENSE . You have the right to use only the one (1) copy of the Program provided in this package subject to the terms and conditions of this License Agreement.
Notice iv HSIM-G01/G09 User’ s Guide SAFETY INFORMATION CLASS 1 LASER TRANSCEIVERS THE HSIM-G01/G09 GIGABIT ETHERNET MODULES USE CLASS 1 LASER TRANSCEIVERS. READ THE FOLLOWING SAFETY INFORMATION BEFORE INSTALLING OR OPERATING THESE ADAPTERS. The Class 1 laser transceiv ers use an optical feedback loop to maintain Class 1 operation limits.
Notice HSIM-G01/G09 User’ s Guide v DECLARATION OF CONFORMITY Application of Council Directiv e(s): 89/336/EEC 73/23/EEC Manufacturer’ s Name: Cabletron Systems, Inc. Manufacturer’ s Address: 35 Industrial Way PO Box 5005 Rochester, NH 03867 European Representativ e Name: Mr.
Notice vi HSIM-G01/G09 User’ s Guide.
HSIM-G01/G09 User’ s Guide vii CONTENTS CHAPTER 1 INTRODUCTION 1.1 Using This Manual ....................................................................... 1-2 1.2 Document Conventions ...............................................................
Contents viii HSIM-G01/G09 User’ s Guide.
HSIM-G01/G09 User’ s Guide 1-1 CHAPTER 1 INTR ODUCTION W elcome to the Cabletron Systems HSIM-G01/G09 User’s Guide . This manual describes the HSIM-G01 and HSIM-G09 and provides information concerning features, installation, troubleshooting, the use of Local Management, and specifications.
Chapter 1: Introduction 1-2 HSIM-G01/G09 User’ s Guide 1.1 USING THIS MAN UAL Read through this manual completely to familiarize yourself with its content and to gain an understanding of the features and capabilities of the HSIM-G.
Getting Help HSIM-G01/G09 User’ s Guide 1-3 1.3 GETTING HELP For additional support related to this de vice or document, contact Cabletron Systems using one of the follo wing methods: Before calling.
Chapter 1: Introduction 1-4 HSIM-G01/G09 User’ s Guide 1.4 OVERVIEW The HSIM-G extends the functionality of certain Cabletron Systems interface modules or standalone de vices by providing high-speed uplink capability through Gigabit Ethernet technology .
HSIM-G01/G09 User’ s Guide 2-1 CHAPTER 2 INSTALLATION T o install the HSIM-G you need the following items: • Antistatic wrist strap • Phillips scre wdri ver 2.1 UNPACKING THE HSIM-G Unpack the HSIM-G as follo ws: 1. Remove the shipping box material covering the HSIM-G.
Chapter 2: Installation 2-2 HSIM-G01/G09 User’ s Guide 2.2 INSTALLING AN HSIM-G Y ou can install an HSIM-G in an y Cabletron Systems device that supports HSIM technology (e.g., 2E42-27, 6E132-25). The follo wing sections provide instructions for installing an HSIM-G in an interface module or in a standalone de vice.
Installing an HSIM-G HSIM-G01/G09 User’ s Guide 2-3 Figure 2-1 Removing the HSIM Co verplate 7. Refer to Figure 2-2 and place the HSIM-G behind the module faceplate. 8. Align the HSIM connector of the HSIM-G with the HSIM pins on the module. 9. Press down firmly on the back of the HSIM-G until the connector slides all the way onto the pins.
Chapter 2: Installation 2-4 HSIM-G01/G09 User’ s Guide 10. Secure the HSIM-G to the module faceplate using the mounting screws saved in step 5. 11. Secure the HSIM-G to the module standoffs using the standoff screws saved in step 6. 12. Reinstall the interface module in the chassis.
Installing an HSIM-G HSIM-G01/G09 User’ s Guide 2-5 2.2.2 Installing an HSIM-G in a Standalone Device T o install an HSIM-G into a standalone device (e.g., 2E42-27), perform the follo wing steps: 1. Power down the device and remove the power cord. 2.
Chapter 2: Installation 2-6 HSIM-G01/G09 User’ s Guide 11. Secure the HSIM-G to the module standoffs using the standoff screws saved in step 6. 12. Reattach the chassis cover to the standalone device, reconnect the power cord, and reconnect the standalone device to the network.
Connecting to the Network HSIM-G01/G09 User’ s Guide 2-7 2.3.1 HSIM-G Network Connection T o connect the HSIM-G01 using multimode and single mode fiber, and the HSIM-G09 using single mode fiber to the network, perform the follo wing steps: 1. Remove the protective fiber port covers from the fiber optic ports and from the ends of the connectors.
Chapter 2: Installation 2-8 HSIM-G01/G09 User’ s Guide Figure 2-4 Fiber Connections 3. At the other end of the fiber optic cable, attach the SC connector to the other device. 4. Verify that a link exists by checking that the link ( LNK) LED is ON (solid green), the port receive ( RX) LED is ON (flashing amber, blinking green, or solid green).
Connecting to the Network HSIM-G01/G09 User’ s Guide 2-9 T o remove the SC connector , from the HSIM-G, carefully pull the connector out of the port. It may need to be wiggled gently to release the latching ke ys. If a link has not been established, refer to Chapter 3 before contacting Cabletron Systems.
Chapter 2: Installation 2-10 HSIM-G01/G09 User’ s Guide.
HSIM-G01/G09 User’ s Guide 3-1 CHAPTER 3 LANVIEW LEDs This chapter describes ho w to use the LANVIEW LEDs to monitor the status of the HSIM-G and diagnose problems.
Chapter 3: 3-2 HSIM-G01/G09 User’ s Guide T able 3-1 HSIM-G LEDs NO TE The terms flashing , blinking , and solid used in T able 3-1 indicate the f ollowing: Flashing indicates an irregular LED pulse. Blinking indicates a steady LED pulse. (appro ximately 50% on, 50% off) Solid indicates a steady LED light.
HSIM-G01/G09 User’ s Guide 4-1 CHAPTER 4 LOCAL MANAGEMENT This chapter provides information on the HSIM-G screens accessible via the Local Management of the host platform. One Local Management screen is specific to the HSIM-G, which is detailed in this chapter .
Chapter 4: Local Management 4-2 HSIM-G01/G09 User’ s Guide Figure 4-1 T ypical Hierarch y of Local Management Screens 4.2 GIGABIT ETHERNET CONFIGURATION SCREEN The Gigabit Ethernet Configuration screen allo ws the user to support the HSIM-G01 and the HSIM-G09.
Gigabit Ethernet Configuration Screen HSIM-G01/G09 User’ s Guide 4-3 Figure 4-2 Gigabit Ethernet Configuration Screen The follo wing defines each field of the Gigabit Ethernet Configuration screen. Po r t X (Read-Only) The port or interface number on the host platform in which the HSIM-G is installed.
Chapter 4: Local Management 4-4 HSIM-G01/G09 User’ s Guide Current Oper . Mode (Read-Only) Displays the current operating mode of the port. Regardless of whether an HSIM-G01 or HSIM-G09 is installed, this field displays 1000Base-XFD. Desired Oper .
Gigabit Ethernet Configuration Screen HSIM-G01/G09 User’ s Guide 4-5 4.2.1.1 Setting the Operational Mode Use the Desired Oper . Mode field to set the acti ve technology .
Chapter 4: Local Management 4-6 HSIM-G01/G09 User’ s Guide.
HSIM-G01/G09 User’ s Guide A-1 APPENDIX A SPECIFICATIONS This appendix lists the specifications and regulatory requirements for the HSIM-G01 and HSIM-G09. Cabletron Systems reserves the right to change these specifications at any time without notice.
Appendix A: Specifications A-2 HSIM-G01/G09 User’ s Guide A.1.2 HSIM-G09 Specifications (1000Base-LX) Table A-4 GPIM-09 Operating Range A. In order to obtain the distance of 550 m for the GPIM-09 using m ultimode fiber , Launch Mode Conditioning cable must be used.
Physical Pr oper ties HSIM-G01/G09 User’ s Guide A-3 A.2 PHYSICAL PR OPERTIES A.3 EN VIR ONMENTAL REQUIREMENTS A.4 REGULATOR Y COMPLIANCE This equipment meets the follo wing safety and electromagnetic compatibility (EMC) requirements: Dimensions 3.18H x 16.
Appendix A: Specifications A-4 HSIM-G01/G09 User’ s Guide.
Ein wichtiger Punkt beim Kauf des Geräts Cabletron Systems HSIM-G01 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Cabletron Systems HSIM-G01 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Cabletron Systems HSIM-G01 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Cabletron Systems HSIM-G01 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Cabletron Systems HSIM-G01 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Cabletron Systems HSIM-G01 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Cabletron Systems HSIM-G01 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Cabletron Systems HSIM-G01. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Cabletron Systems HSIM-G01 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
