Benutzeranleitung / Produktwartung 1200 des Produzenten Cabletron Systems
Zur Seite of 106
W OR K GRO UP R EM OTE A CCE SS S WITCH E XA MPL E N ETW ORKS Release 7.2 Cabletron Systems (603) 332-94 00 phone (603) 337-30 75 fax suppo rt @ ctr on.
EX AMPLE NET WORKS 2 Cybe rSWITCH NOT ICE Y o u m a y p o s t t h i s d o c u m e n t o n a n e t w o r k s e r v e r f o r p u b l i c u s e a s l o n g a s n o mod i fi ca ti on s ar e ma d e to th e d o cu m e n t .
Workgroup Remote Ac cess Switch 3 TRAD EMAR KS Cabl etro n Sy st ems, Cybe rS WIT CH, MMA C- Pl us, S mar tSW IT CH, S PE CTR UM , and SecureFast Vir tual Remote A cc es s Manager are trademarks of Cablet ron Sy st ems , I nc .
EX AMPLE NET WORKS 4 Cybe rSWITCH WA RNING : Chan ges or mo dific ations made to this de vice wh ich ar e not e x pr essly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Workgroup Remote Ac cess Switch 5 CONT ENT S Sim p l e Rem ote Br id gin g Ne t w o r k 9 Ov erv iew 9 Initial Ins talla tion Steps 9 Configu ring the S imple Rem ote Bridge 9 Res ource s 10 Lin es 10.
EX AMPLE NET WORKS 6 Cybe rSWITCH Lin es 47 Devi ce In for m atio n 48 Brid g i n g and Rout ing I nfo rm ati on 50 Bri dgi ng 50 IP Rou ti ng 50 Config ure the CyberSWITCH 51 Configu ring th e Cyb er.
Workgroup Remote Ac cess Switch 7 AppleTalk Rou t in g Net work 93 Ov erv iew 93 Initial Ins talla tion Steps 93 Res ource s 95 Lin es 95 AppleTalk Routing 96 Config ure the CyberSWITCH 98 Co nfi gu r.
E XAMPLE N ETWORKS We pr ovid e sever al examp le netw orks , be ginni ng wit h a simp le net work and prog re ssin g to mor e complex net works. Yo u may find th e configurat ion inst ructions provided fo r eac h ex ample hel pful when c onfiguring y our ow n n etwork.
S IMPLE R EMOTE B RIDG ING N ETWO RK O VERVIEW This ch apter p rovi des an exa mple o f a simp le netw ork using remo te b ridge devic es to acce ss four basic rate lines in the CyberSWITCH.
EX AMPLE NET WORKS 10 CyberSWITCH Sys tem N am e: SITE 1 PAP Password:____ ___________ CHAP Secret:__ _____ ___________ _ R ESO URCES L INES BRI Li nes PRI L ines V.
Workgroup Remote A ccess Switch 11 S IMPLE R EMOTE B RID G I NG N ETWORK Bridging and Routing Infor mation B RIDGI NG IP R OUTING Netw ork I nterface Inform ation Stati c Rout es Brid ging X enable d .
EX AMPLE NET WORKS 12 CyberSWITCH C ONFIGU R E THE C YB ER SWITC H Using CFGED IT, w e w ill guide yo u thr ough the steps t o configur e the C yberSW ITC H f or a sim ple remote bridge net work. We will ex ecute these steps in the sam e order as they appear in the configura tion me nus.
Workgroup Remote A ccess Switch 13 S IMPLE R EMOTE B RID G I NG N ETWORK Bridging and Routing Infor mation The next item that yo u need t o configure is t he Data Link for the li n e. D epending on t he switch type, there may be more than one Data L in k per line.
EX AMPLE NET WORKS 14 CyberSWITCH Th e netwo rk illu strat ed abov e is a bridg ed n etw ork. E ach s yst em, S ITE1 and SIT E2 hav e bee n confi gured with all the necessar y brid ging information. SITE1 and S ITE2 have also been configured in the IP h ost oper ating mode , and e ach have an IP ho st interfa ce.
Workgroup Remote A ccess Switch 15 S IMPLE R EMOTE B RID G I NG N ETWORK Bridging and Routing Infor mation To configure the IP host interface: 1. Selec t IP Interfaces fr om the IP c o n figur ati on menu . 2. Selec t to add an int erface. 3. Enter the IP addres s assigned to this inter face.
EX AMPLE NET WORKS 16 CyberSWITCH V ERIFY THE I NSTALLATION Ste p s on how to ve r ify the i nstall at ion are det ail e d i n the System V erifica tion chapt er of the U ser’s Guide . This section gives an outline of which steps should be executed.
R EMOTE B RIDG ING N ETWORK WIT H S ECURIT Y O VERVIEW Th is example netwo rk is a bridge d ne twork w ith Calling Li ne I d security and Bridg e M AC Addr ess securi ty enab led.
EX AMPLE NET WORKS 18 CyberSWITCH File Server BRI BRI PC PC PC BRI Hunt Group Number: 13135551111 13135551111 13135551112 13135551113 13135551114 13135551212 13135552121 13135556789 13135559876 Bridge.
Workgroup Remote A ccess Switch 19 R EMOTE B RID G IN G N ET WO RK WIT H S EC URITY Init ial Installation Steps Syste m Name: Remo te Bri dge PAP Password:_ ___________ ___ CHAP Secre t :_____ _______.
EX AMPLE NET WORKS 20 CyberSWITCH De vi ce N am e: Mi ke Ma nn Ca lli ng (IS DN , FR , et c .) In f orma t ion X. 2 5 In f orm at ion Authenti cation Info r mati o n : Frame Relay In formatio n * HDLC.
Workgroup Remote A ccess Switch 21 R EMOTE B RID G IN G N ET WO RK WIT H S EC URITY Device Information De vi ce N am e: Pat Smit h Ca lli ng (IS DN , FR , et c .
EX AMPLE NET WORKS 22 CyberSWITCH B RIDGI NG IP R OUTING Netw ork I nterface Inform ation Stati c Rout es Brid ging X enabled ❒ disabled Mode of O perati on ❒ re stri cted ❒ unrestri ct ed Brid .
Workgroup Remote A ccess Switch 23 R EMOTE B RID G IN G N ET WO RK WIT H S EC URITY Configure the CyberSWITC H C ONF I G URE THE C YBER SWITCH Note: We are assumin g th at the soft war e ha s al ready been install e d an d is r u nni n g . B e sure you are working from the system prompt .
EX AMPLE NET WORKS 24 CyberSWITCH aut h e nticat ion data base. Dev ice secur ity usi ng a on-node aut hentic at ion datab a se are th e def a ult valu es .
Workgroup Remote A ccess Switch 25 R EMOTE B RID G IN G N ET WO RK WIT H S EC URITY Configure the CyberSWITC H Afte r the new de vice nam e has been specif ied, a sc reen sim ilar t o th e follow ing is d isplaye d. Inf orm ati on f or th e new de v ice m ay be c onfig u red in any ord e r.
EX AMPLE NET WORKS 26 CyberSWITCH At th e Dev ice Ta ble Menu, p re s s 4 to ent er the auth entic ation i nform ation nee ded for th is devi ce. The authenticat ion infor matio n needed for each device depends o n the device type.
Workgroup Remote A ccess Switch 27 R EMOTE B RID G IN G N ET WO RK WIT H S EC URITY Verify the Installation V ERIFY THE I NSTALLATION Ste p s on how to ve r ify the i nstall at ion are det ail e d i n the System V erifica tion chapt er of the U ser’s Guide .
IP R OU TIN G N ETWORK O VERVIEW This sampl e networ k has an I P ne tw ork wi th devi ce s acces sing t he n etwork f ro m thei r homes. I NIT IAL I NSTALLATION S TEPS Th e initial step s in the Cyber SWIT CH insta llati on proce ss are basi cally th e same no matt er how complicated t h e network.
Workgroup Remote A ccess Switch 29 IP R OU TIN G N ETWORK Init ial Installation Steps N ETW ORK T OP OLOG Y File Server BRI BRI BRI BRI PC PRI 128.1.1.1 192.1.1.2 Fred Bear 128.1.1.3 Todd Jones 192.1.1.3 Ralph Moose 128.1.1.2 Jill Smith ISDN LAN 131.1.
EX AMPLE NET WORKS 30 CyberSWITCH Syste m Name: IP Netwo rk PAP Password: ____ ___________ CHAP Se cre t:_____ ___________ ___ R ESO URCES L INES BRI Li nes PRI L ines Type Slot Switch type Sync hroni.
Workgroup Remote A ccess Switch 31 IP R OU TIN G N ETWORK Device Information De vi ce N am e: Ri ck Bear Ca lli ng (IS DN , FR , et c .) In f orma t ion X.
EX AMPLE NET WORKS 32 CyberSWITCH De vi ce N am e: Ji ll Smit h Ca lli ng (IS DN , FR , et c .) In f orma t ion X. 2 5 In f orm at ion Authenti cation Info r mati o n : Frame Relay In formatio n * HDL.
Workgroup Remote A ccess Switch 33 IP R OU TIN G N ETWORK Device Information De vi ce N am e: R al ph Moos e Ca lli ng (IS DN , FR , et c .) In f orma t ion X.
EX AMPLE NET WORKS 34 CyberSWITCH De vi ce N am e: To dd Jone s Ca lli ng (IS DN , FR , et c .) In f orma t ion X. 2 5 In f orm at ion Authenti cation Info r mati o n : Frame Relay In formatio n * HDL.
Workgroup Remote A ccess Switch 35 IP R OU TIN G N ETWORK Bridging and Routing Infor mation B RIDGI NG IP R OUTING Netw ork I nterface Inform ation Stati c Rout es Brid ging ❒ ena bled ❒ disabl ed.
EX AMPLE NET WORKS 36 CyberSWITCH C ONF I G URE THE C YBER SWITCH Note: T h e sof tware sh ou l d have alr e ad y been inst alled and you sh ould see the sy stem prom pt before proceeding with these s teps.
Workgroup Remote A ccess Switch 37 IP R OU TIN G N ETWORK Configure the CyberSWITC H C ONFIGURING THE IP I NTERFACE I NFORMAT ION In our example, we need to configure three types of interfaces (ref er to the Netwo rk Topology Worksheet ). The LAN type network interfac e repr esent s the system connection to the IP Network 12 8.
EX AMPLE NET WORKS 38 CyberSWITCH The inte r acti ve LAN inter face se ssi on shoul d be simil ar to the fo l lowing: 1) LAN 2) WAN 3) WAN (Direct Host) 4) WAN (RLAN) 5) WAN (UnNumbered) Select functi.
Workgroup Remote A ccess Switch 39 IP R OU TIN G N ETWORK Configure the CyberSWITC H After yo u have e ntered all o f the informa tion for the int erfac e, a summa ry screen is displa yed. Yo u are as ked if you w ant to save t his info rmat ion. If all of t he con figured inf orma tion is accur ate, pres s <return> t o save t he information.
EX AMPLE NET WORKS 40 CyberSWITCH Th e WA N inter face s ummar y screen wi ll then be displ ayed. If all o f the co nfigure d infor matio n is accu r ate , press <r eturn > to save th e in f o rma ti on. Fin ally , we wi ll en ter t he in terfac e in f or matio n for the W AN ( Dire ct Host) in terfac e.
Workgroup Remote A ccess Switch 41 IP R OU TIN G N ETWORK Configure the CyberSWITC H C ONFIGURING THE D EVICE L E VEL D ATABA SE Before beginning, note the fo llowing : Th e Dev ice Na me is the s ymb olic na me f or the Devi ce.
EX AMPLE NET WORKS 42 CyberSWITCH The onl y othe r i tem on th e De vice I S D N Line Prot ocol Men u t hat thi s type of devi ce need s is th e maximum data ra te. We will accept the def ault value of 128,000 bps. No chan g e s are re q uire d. Ret urn to th e D evice T ab le Menu .
Workgroup Remote A ccess Switch 43 IP R OU TIN G N ETWORK Configure the CyberSWITC H Th e follow ing scre en will be displ ayed aft er all four d evic es in ou r exa mple have been enter ed: Ret urn to the Se cu rity Con figu ra tion Men u .
EX AMPLE NET WORKS 44 CyberSWITCH V ERIFY THE I NSTALLATION Ste p s on how to ve r ify the i nstall at ion are det ail e d i n the System V erifica tion chapt er of the U ser’s Guide . This section gives an outline of which steps should be executed for Example 3.
IP R OUTING N ETWORK WIT H R EMOTE B RIDGE D EVI C ES O VERVIEW Th is samp le netwo rk has t wo remo te sat ellite offic es in Monte rey and Carmel, Califo rnia , that need to be in daily electro nic commu nic ation wit h thei r Corpo rat e Office.
EX AMPLE NET WORKS 46 CyberSWITCH Corporate Office ISDN Host File Server 128.1.1.1 RLAN Interface 198.12.10.1 BRIs BRI BRI HDLC Bridge HDLC Bridge Host Host "Carmel" "Monterey" IP (Sub-) Network Number 131.
Workgroup Remote A ccess Switch 47 IP R OU TI NG N ET WO RK WIT H R EMOTE B RID G E D EVICES Resources Sys tem N am e: Corp PAP Pa sswor d:______ _____ ___ CHAP Secret:_ ___________ ___ R ESOURC ES L .
EX AMPLE NET WORKS 48 CyberSWITCH De vi ce N am e: M on ter ey Ca lli ng (IS DN , FR , et c .) In f orma t ion X. 2 5 In f orm at ion Authenti cation Info r mati o n : Frame Relay In formatio n * HDLC.
Workgroup Remote A ccess Switch 49 IP R OU TI NG N ET WO RK WIT H R EMOTE B RID G E D EVICES Device Information De vi ce N am e: Ca rm el Ca lli ng (IS DN , FR , et c .
EX AMPLE NET WORKS 50 CyberSWITCH B RIDGI NG IP R OUTING Netw ork I nterface Inform ation Stati c Rout es Brid ging ❒ ena bled X disabl ed Mode of O perati on ❒ re stri cted ❒ unrestri ct ed Bri.
Workgroup Remote A ccess Switch 51 IP R OU TI NG N ET WO RK WIT H R EMOTE B RID G E D EVICES Configure the CyberSWITC H C ONF I G URE THE C YBER SWITCH Using the de taile d ins tructio ns fo und in the Simple R emote B ridging ch a p te r , co m p l e te the configur ation s teps lis ted belo w.
EX AMPLE NET WORKS 52 CyberSWITCH The in terf ac e name is a sy mboli c name gi ve n to the i nt erfa ce. For the LAN int erfa ce, us e a na me tha t descr ibes th e LAN , su ch as the n a me of th e site or de p a r tment . Type Cor p O ffi c e for this example.
Workgroup Remote A ccess Switch 53 IP R OU TI NG N ET WO RK WIT H R EMOTE B RID G E D EVICES Configure the CyberSWITC H You will then be prompt ed to verify your input. Make changes if necessary, o r, if o rigina l input corr ect , co nt i nu e wit h co nf ig ur a tio n for RLA N int erf a ce .
EX AMPLE NET WORKS 54 CyberSWITCH The int e rf ace name i s a sy mb olic name g i ven to th e i nter face . F or t he WAN ( R LAN) inte rf a ce, you sh ou l d u se a n a m e th a t de s c r i b e s th is i nt e rf a ce . T yp e Satel lites for this example.
Workgroup Remote A ccess Switch 55 IP R OU TI NG N ET WO RK WIT H R EMOTE B RID G E D EVICES Configure the CyberSWITC H C ONFIGURING THE S ECURITY L EVEL To begin, press 1 at the Sec u ri ty Menu, and the Securit y Level M enu wil l be displayed . To enable De vice L eve l Se cur ity , p re ss 2.
EX AMPLE NET WORKS 56 CyberSWITCH No ot he r ch an g e s a re re q ui r e d . Re tu rn to the D e vic e Ta b le Men u. Next, we w ill co nfigu re the Bridge E thernet Add ress and Pa ssword.
Workgroup Remote A ccess Switch 57 IP R OU TI NG N ET WO RK WIT H R EMOTE B RID G E D EVICES Verify the Installation C ONFIGURING THE O FF - NODE S ER VER I NF OR MATIO N The default configuration for Off-node Ser ver Information is None ( U se On-node).
IP R OU TIN G N ETWORK WI TH PPP D EVICES O VERVIEW This sample network uses IP routing to connect two of our pro ducts, both using PPP. E ach system is on a separate LAN.
Workgroup Remote A ccess Switch 59 IP R OUT ING N ETWORK WI TH PPP D EVICES Init ial Installation Steps Host #1 File Server Internet Router LAN 1 128.1.1.8 128.1.1.3 128.1.1.7 LAN Interface 128.1.1.1 CSX1200 Phone Number: 918105551234 IP UnNumbered Interface for SITE1 and SITE2 Host #2 LAN 2 128.
EX AMPLE NET WORKS 60 CyberSWITCH Sys tem N am e: Sit e1 PAP Passwor d:______ _____ ____ CHAP Secret:____ _ df8s fd s33 _________ ___S it e2_ ___ _ __ __ikc d9 8s__ __ _ R ESO URCES L INES BRI Li nes .
Workgroup Remote A ccess Switch 61 IP R OUT ING N ETWORK WI TH PPP D EVICES Bridging and Routing Infor mation For S I T E 1 B RIDGI NG IP R OUTING Netw ork I nterface Inform ation Stati c Rout es Brid.
EX AMPLE NET WORKS 62 CyberSWITCH For S I T E 2 B RIDGI NG IP R OUTING Netw ork I nterface Inform ation Stati c Rout es Brid ging ❒ ena bled X disabl ed Mode of O perati on ❒ re stri cted ❒ unre.
Workgroup Remote A ccess Switch 63 IP R OUT ING N ETWORK WI TH PPP D EVICES Device Information For Site 1 De vi ce N am e: Si te2 Ca lli ng (IS DN , FR , et c .
EX AMPLE NET WORKS 64 CyberSWITCH For Site 2 De vi ce N am e: Si te1 Ca lli ng (IS DN , FR , et c .) In f orma t ion X. 2 5 In f orm at ion Authenti cation Info r mati o n : Frame Relay In formatio n .
Workgroup Remote A ccess Switch 65 IP R OUT ING N ETWORK WI TH PPP D EVICES Configure SITE1 C ONF I G URE SITE1 Note: T h e sof tware sh ou l d have alr e ad y been inst alled and t he sy st em promp t sh ould be displaye d befo re beginning the configurat ion.
EX AMPLE NET WORKS 66 CyberSWITCH C ONFIGURING THE IP I NTERFACE I NFORMAT ION In our example, we need to configure two types of in t erface s. The LAN interface repres ents SITE1’s connect i on to the LAN IP N etwork 128 .1. 1. 1. A WAN UnNum bered interf ace r e present s SITE1’s logical connec tion t o SITE 2.
Workgroup Remote A ccess Switch 67 IP R OUT ING N ETWORK WI TH PPP D EVICES Configure SITE1 Th e screen interac tion wi ll resemb le the foll owing : After you hav e entered all of the informat ion for the interface, a summ ary scr e en will be display e d.
EX AMPLE NET WORKS 68 CyberSWITCH After you save the LAN interf ace configur ation, press 1 to add the next inter fac e. Configure th e inform ation f or the WA N (U nN um be red) int erface as follo w s: As the above screen shows, not m uch informat ion is needed to configure a W AN (UnNumber e d ) interfac e.
Workgroup Remote A ccess Switch 69 IP R OUT ING N ETWORK WI TH PPP D EVICES Configure SITE1 Inf orm ati on f or th e new de v ice m ay be c onfig u red in any ord e r. Yo u ha ve co nt rol o ver h ow muc h inform ation is sp ecified for each d evice, and the order in w hich it is entere d.
EX AMPLE NET WORKS 70 CyberSWITCH Pr ess 5 to ent er the fir st d ial out num be r. A ph one numb er must be def ined for each remo te de vi ce that w ill b e dialed . This numbe r inc ludes any p ref ix digit s, area codes , or e xtensio ns as r equire d to dial t he destination d ev ice.
Workgroup Remote A ccess Switch 71 IP R OUT ING N ETWORK WI TH PPP D EVICES Configure SITE1 Th e follow ing scre en will be displ ayed aft er all inform ation fo r devic e SIT E2 h as been e ntered : Now that device SITE2 has been confi gured, we ca n add the needed stat ic route: • Ret urn to the Ma in Menu.
EX AMPLE NET WORKS 72 CyberSWITCH We now need to enter the metric value for this route. The met ri c value is the adm ini s t r ative distanc e to the destination of t he entry.
Workgroup Remote A ccess Switch 73 IP R OUT ING N ETWORK WI TH PPP D EVICES Configure SITE1 Next , sel ec t the RIP Propagati on Co nt ro l. This controls how a stati c route is propagated vi a RI P. Pr e ss 3 to p r opagate on l y when the Nex t Hop is conn e ct ed.
EX AMPLE NET WORKS 74 CyberSWITCH C ONFIGURING S YSTEM O PTIO NS AND I NFORMAT ION To config ure Sys tem Options an d Informati on, press 2 at the Securi ty Menu. By defaul t, all system opt i ons are enabl ed by defaul t, whi ch is acc e p tab l e for this ne tw ork.
Workgroup Remote A ccess Switch 75 IP R OUT ING N ETWORK WI TH PPP D EVICES Verify the Installation C ONFIGURING S TA TIC R OUTES To con figu re th e stati c route i nfor mation for S ITE2, ref er to .
EX AMPLE NET WORKS 76 CyberSWITCH On SITE2: Ch eck connec tiv ity to local dev ices IP PING 128. 3. 3.4 (host) Ch eck connec tiv ity to SITE 1 CA LL D EV ICE SIT E1 Ch ec k co n ne c tiv it y to rem o te de v ice s IP PING 128. 1. 1.8 (host) IP PING 128.
IPX R OU TIN G N ETWORK O VERVIEW This sa mp l e net work u ses I PX p rot ocol t o al low r e mo te dev ices and th eir se r ve rs to c ommuni ca te. It illustrates a master networ k in which the cen.
EX AMPLE NET WORKS 78 CyberSWITCH N ETW ORK T OPOLOGY ISDN Detroit Master Network External # 0100 Server 'masternet' IPX Router Internal # 111abc CHAP secret: df8sds33 Remote IPX Router Inte.
Workgroup Remote A ccess Switch 79 IPX R OU TIN G N ETWORK System Details Sys tem N am e: ma st er net PAP Pa sswor d:______ _________ CHAP Secret: df8s ds 33 R ESO URCES L INES BRI Li nes PRI L ines .
EX AMPLE NET WORKS 80 CyberSWITCH De vi ce N am e: da ll asne t Ca lli ng (IS DN , FR , et c .) In f orma t ion X. 2 5 In f orm at ion Authenti cation Info r mati o n : Frame Relay In formatio n * HDL.
Workgroup Remote A ccess Switch 81 IPX R OU TIN G N ETWORK Device Information De vi ce N am e: ta mp abr Ca lli ng (IS DN , FR , et c .) In f orma t ion X.
EX AMPLE NET WORKS 82 CyberSWITCH De vi ce N am e: or la ndob r Ca lli ng (IS DN , FR , et c .) In f orma t ion X. 2 5 In f orm at ion Authenti cation Info r mati o n : Frame Relay In formatio n * HDL.
Workgroup Remote A ccess Switch 83 IPX R OU TIN G N ETWORK Bridging and Routing Infor mation B RIDGI NG IP R OUTING Netw ork I nterface Inform ation Stati c Rout es Brid ging X enabled ❒ di sabled M.
EX AMPLE NET WORKS 84 CyberSWITCH IPX R OU TIN G IPX Ro uting Informatio n Netw ork I nterface Inform ation IPX St atic Rout es NetW are Sta tic Servi ces IPX ro utin g X en abl ed ❒ disabl ed Int e.
Workgroup Remote A ccess Switch 85 IPX R OU TIN G N ETWORK Configure IPX Routing: Masternet (Detroit) C ONF I G URE IPX R OU TING : M ASTERNET (D ETROIT ) Using the de taile d ins tructio ns pr ovided.
EX AMPLE NET WORKS 86 CyberSWITCH four c alls/connec tions r unnin g in p arallel). C onfigur e a dial-out num ber fo r the D al las sit e , wh i ch i s: 91214333 9999. We w i ll n ot use the r emaining para m eter s (subaddress , pr ofi l e n am e or HO support ) for thi s e x amp le .
Workgroup Remote A ccess Switch 87 IPX R OU TIN G N ETWORK Configure IPX Routing: Masternet (Detroit) A DD R EMO TE LAN D EV ICES Fr om the On-node Dev ice Entries Menu , selec t Add . Ent e r the de vic e nam e f or t he T ampa si t e, wh ic h is ta m p a br .
EX AMPLE NET WORKS 88 CyberSWITCH 2. Selec t IPX Routing. 3. En able IPX Rout ing. Pr e ss an y key to dis p l ay the compl ete IPX rou t ing men u : D EFINE AN I NT ERNAL N ET WO RK N UMBER 1. Fr om the IP X men u, sel e c t IPX Internal Network N umber .
Workgroup Remote A ccess Switch 89 IPX R OU TIN G N ETWORK Configure IPX Routing: Masternet (Detroit) Add a Remote LAN Interface Aft er c o mpl e ting t he LA N int erf ac e co nf ig ura ti on , se lec t Add to ad d the next in te r fac e fo r th e Remo te LA N.
EX AMPLE NET WORKS 90 CyberSWITCH Finally, you’ll see this screen: Whe n you’ve comp leted the c onfigur ation of b oth i nterfaces , you’ll see a summary scre e n sim ilar to t he foll ow i ng: SAP Send Control: 1) Do Not Send. 2) Send. Enter a SAP Send Control from the above menu [default = 2]? 1 SAP Receive Control: 1) Do Not Receive.
Workgroup Remote A ccess Switch 91 IPX R OU TIN G N ETWORK Configure IPX Routing: Masternet (Detroit) I PX S TA TIC R OUTES Ass uming th e rou t er at Dal las supp or ts tri ggered RIP over th e WA N, it is not nece ssar y to configure static rout es.
EX AMPLE NET WORKS 92 CyberSWITCH S AVE C O NFIGUR ATION F ILES We have no w configu red all the requir ed info rma tion for master net , the I P X rou t e r i n De tr o i t. Ret urn to the M ain M e n u, sav e you r con f igurat ion f i les, and e x it.
A PPLE T ALK R OUTIN G N ETWO RK O VERVIEW This chapter pro v ides an example confi guration of an AppleTalk Routing network. Our AppleTalk netw ork is mad e up of tw o LA Ns, se p a r ated by the WA N. T he M AC s on each sid e of th e WAN nee d t o e xc hange pack ets wi th the MACs on th e o ther sid e of the WAN.
EX AMPLE NET WORKS 94 CyberSWITCH SITE1 AppleTalk Configuration Network Range: 10-13 Zones: SITE1.Engineering (default) SITE1.Marketing SITE2 AppleTalk Configuration Network Range: 45-50 Zones: SITE2.
Workgroup Remote A ccess Switch 95 A PPLE T ALK R OU TIN G N ETWORK Init ial Installation Steps Sy ste m Na me: SITE1 PAP Passwor d:______ _________ CHAP Secret: R ESO URCES L INES BRI Li nes * Hunt G.
EX AMPLE NET WORKS 96 CyberSWITCH A PPLE T ALK R OUTING AppleTa lk Routing/Por t Informatio n AppleTa lk Port Static Routes AppleTal k rou ting X ena bled ❒ disabl ed LAN Name lanp or t1 Port number 1 Network t ype X exte nded ❒ nonext ended Netwk r ange/ number 10-1 3 AppleTal k address (non e) Zone name(s) site 1.
Workgroup Remote A ccess Switch 97 A PPLE T ALK R OU TIN G N ETWORK Init ial Installation Steps De vi ce N am e: SI TE 2 Ca lli ng (IS DN , FR , et c .
EX AMPLE NET WORKS 98 CyberSWITCH C ONF I G URE THE C YBER SWITCH Note: T he so ftware shou ld h ave alr eady been i nst alled and y ou nee d th e syste m pr ompt b efore proceeding w i th these s teps.
Workgroup Remote A ccess Switch 99 A PPLE T ALK R OU TIN G N ETWORK Configure the CyberSWITC H C ONFIGURING A PPLE T AL K P ORT I NF ORMATION For this example, we need to configure both a LAN and a WA N UnNumbered AppleTalk port.
EX AMPLE NET WORKS 100 CyberSWITCH • AppleTalk network range: This range specifies the AppleTalk network range of the L AN segment that the port is con nect ed to. As in di c ated by th e topol ogy work sh eet , th e networ k ran ge for SI TE 1’s LAN i s 10-13 .
Workgrou p Remote Access Swi tch 1 01 A PPLE T ALK R OU TIN G N ETWORK Configure the CyberSWITC H C ONFIGU R IN G D EVICE I NFO RMATION Selec t Security from the Main CF GE DIT Menu. The Securi ty Menu w ill then be displ ayed as follows: We nee d t o confi g ure de vi ce in f or matio n for ou r re m ote de vice, SITE2.
EX AMPLE NET WORKS 102 CyberSWITCH The ISDN Line Pr otocol default co nfiguration va lue of “PPP” is wh at SITE2 uses, so no changes are requ i red fo r th is p ar a met er.
Workgrou p Remote Access Swi tch 1 03 A PPLE T ALK R OU TIN G N ETWORK Configure the CyberSWITC H C ONFIGURING D EVICE SITE 2’ S A UT HENT ICATION I NFORMATION At the Dev i ce Table Menu, selec t Authe ntication. You may th en ente r the authen tica tion infor mation needed for this device.
EX AMPLE NET WORKS 104 CyberSWITCH After the device’s AppleT alk informatio n has been entered, the menu w ill appear as follo ws: We will n ow c ontinue w ith t he Ap pleTal k Rou ting con figuratio n. R eturn to the m ain AppleT alk Rou ting Menu.
Workgrou p Remote Access Swi tch 1 05 A PPLE T ALK R OU TIN G N ETWORK Verify the Installation • ne x t hop’s de vice n ame Whenever you enter 0.0 for the next hop address, you are then required to enter the n ext hop’s dev ice n ame . E nt er SIT E2 .
EX AMPLE NET WORKS 106 CyberSWITCH I NDEX A AppleTalk routing example network 93 C comp liance no tices 3 Configu ring RLA N Us ers 87 D DOC notice 4 E example networks AppleTalk Routing 93 IP 28 IP r.
Ein wichtiger Punkt beim Kauf des Geräts Cabletron Systems 1200 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Cabletron Systems 1200 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Cabletron Systems 1200 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Cabletron Systems 1200 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Cabletron Systems 1200 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Cabletron Systems 1200 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Cabletron Systems 1200 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Cabletron Systems 1200. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Cabletron Systems 1200 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
