Benutzeranleitung / Produktwartung Switch des Produzenten Adder Technology
Zur Seite of 70
SmartV iew W orld User Guide .
1 Contents W elcome Introduction ...................................
2 Operation Powering on ............................................
3 SmartView World.
4 SmartView World.
5 HT I nstallation This chapter covers the physical mounting and connection of the SmartView World.
6 Computer port connections SmartView World can be directly connected to a maximum of sixteen computer systems.
7 Remote (IP) use.
8 6 T ype ‘cong’ and press .
9 P ow er supply connection The SmartView World is supplied with a single power supply and an appr opriate country-specic IEC power lead.
10 T o connect and address the switch boxes Note: The SmartView W orld can be powered on during this procedure, however , the switch boxes should be switched off.
11 Cascade connections The SmartView World supports up to sixteen directly connected computer systems, however , this is by no means the limit of its capabilities.
12 Ho w cascade connections operate The method for cascading switching units is straightforward and r equires no hardwar e settings or lengthy conguration process.
13 Addr essing co.
14 4 Connect the plugs at the other end of the KVM cable set to the keyboard, video and mouse sockets of a User port on the rear panel of the lower switch.
15 Slave SmartVie.
16 HT Conguration Almost all conguration and operational aspects of the SmartView World ar e controlled via on-scr een menu displays.
17 KVM conguration menus The KVM conguration menus allow you to determine many aspects of the SmartView World switching capabilities.
18 T o enable KVM security 1 Display the KVM conguration menu . 2 Use to highlight ‘Setup Options’ and press .
19 T o create/edit computer names 1 Display the KVM conguration menu .
20 T o select an autoscan mode 1 Display the KVM conguration menu .
21 T o edit the KVM conguration settings The saved XPRODA T A.CSV le can be opened using a spr eadsheet program such as Microsoft Excel.
22 H ot plugging and mouse restoration It is strongly r ecommended that you switch off a computer befor e attempting to connect it to the SmartView World.
23 Resetting user.
24 Editing po wer.
25 IP congurat.
26 3 As all Smart.
27 T o modify , copy or delete a user 1 W ithin the SmartView World home page, select the ‘User/Gr oup Management’ option in the ‘Administration’ section.
28 U sing the U ser/G roup P ermissions panel This is where you determine exactly how the SmartView W orld home page appears to each user who connects via an IP link.
29 Selecting appr.
30 Deter mining computer ports display and selection When shipped, the SmartView World IP section will be congur ed to view only one computer port.
31 Click these buttons to select computers.
32 Disabling mouse acceleration Certain operating systems, such as Windows XP provide an option to use ‘mouse acceleration’ or ‘Enhance pointer precision’.
33 HT Operation P o wering on The SmartView World does not have a power switch, so whenever power is applied via the supplied adapter , the unit is operational.
34 U sing the KVM.
35 2 Use the and keys (or the scroll wheel of an IntelliMouse) to highlight the requir ed computer name.
36 T o select a computer using mouse buttons – Advanced method 1 Select the on-screen menu by pressing the middle and right buttons of a three button mouse.
37 Selecting cascaded computers The SmartView World is not limited to sharing just sixteen computers.
38 U sing r emote.
39 U sing the r emote IP section A key feature of the SmartView W orld is its ability to let you switch between, view and control computers fr om almost anywhere.
40 Selecting a computer (r emote IP users) T o select a computer 1 Click the ‘Show Remote Console’ option.
41 HT F ur ther i.
42 Appendices App.
43 Exclusive Use Settings: ALLOWED, DISABLED In normal operation, the SmartView World will allow two or mor e users to share access to a computer .
44 Screen Saver S.
45 U ser P refer ences The User Prefer ences are system operating parameters that ar e independently selectable for each user and affect only their scr een.
46 Functions The Functions menu contains a collection of procedur es that affect various aspects of SmartView World operation.
47 Appendix 2 – IP conguration panels The items discussed in this appendix are accessible within the SmartView W orld IP section home page.
48 Remote Console S ettings The Remote Console settings allow you to customize the Remote Console window prior to its start.
49 Remote Console T ype Species which Remote Console Viewer to use: Default Java-VM Uses the default Java Virtual Machine of your Browser .
50 KVM Settings T.
51 Video Settings.
52 U ser/G roup Management The user and group management of the SmartView World IP section is based on congurable users and groups.
53 U ser/G roup P ermissions A set of permissions is assigned to each user or group.
54 N etwork Settings The Network Settings panel allows you to change network related parameters.
55 Serial P ort Settings The SmartView World Serial settings allow you to specify which devices are connected to the fr ont panel serial port and how to use it.
56 Rule Number This should contain the number of a rule for which the following commands will apply .
57 Agent Enable SNMP Agent If this option is checked, the SmartView World will answer to SNMP r equests.
58 Power Control If IPMI is enabled, these functions are performed over IPMI r equests.
59 Remote Console.
60 Remote Console Options Monitor Only When selected, this option prevents any keyboar d or mouse input being sent to the selected computer .
61 Maintenance SmartView World Boar d Summary This section contains a summary with various data about this SmartView World and its curr ent rmware.
62 Appendix 3 – F ir mwar e upgrade (KVM section) The SmartView World uses ash memory technology that allows you to upgrade the rmware code.
63 IMPORT ANT : The upgrade programs are DOS based to enable compatibility with the widest range of operating systems.
64 Appendix 4 –.
65 S martView W o.
66 Other products.
67 Radio F requen.
68 © 2003 Adder T echnology Limited All trademarks are acknowledged.
69 HT I ndex A Ad.
Ein wichtiger Punkt beim Kauf des Geräts Adder Technology Switch (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Adder Technology Switch noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Adder Technology Switch - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Adder Technology Switch reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Adder Technology Switch erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Adder Technology Switch besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Adder Technology Switch verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Adder Technology Switch. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Adder Technology Switch gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
