Benutzeranleitung / Produktwartung X10 des Produzenten Bosch Appliances
Zur Seite of 132
VideoJet X10 Network Video Server en Installation and Operating Manual.
.
Vide oJ et X1 0 T able of Content s | en 3 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 T able of Contents 1P r e f a c e 7 1.1 About this Manual 7 1.2 Conventions in this Man ual 7 1.3 Intended Use 7 1.4 EU Directives 8 1.
4 en | T able of Content s Vide oJ et X1 0 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems 5.19 Recording Profiles 57 5.20 Rec ording Sche duler 59 5.21 Alarm Sources 61 5.22 Alarm Connections 62 5.23 VCA 65 5.24 Alarm E-Mail 70 5.
Vide oJ et X1 0 T able of Content s | en 5 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 10 Specifications 125 10.1 Unit 125 10.
6 en | T able of Content s Vide oJ et X1 0 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems.
Vide oJ et X1 0 Preface | en 7 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 1P r e f a c e 1.1 About this Manual This manual is intended for pers ons responsi ble for the installation and operation of the VideoJet X10.
8 en | Preface Video Je t X10 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems 1.4 EU Directiv es The VideoJet X10 network video server complies with the requirements of EU Dire ctives 89/ 336 (Electromagnetic Compatibility) and 73 /23, amended by 93/68 (Low Voltage Directive).
Vide oJ et X1 0 Safety Information | en 9 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 2S a f e t y I n f o r m a t i o n 2.1 Electric Shock Hazard – Never attempt to connect the unit to any po wer network other than the type for which it is intended.
10 en | Safety Inf ormation Vide oJ et X1 0 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems.
Vide oJ et X1 0 Pr oduct Description | en 11 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 3 Product De scription 3.1 Scope of Deliv er y – VideoJet X10 network vi deo ser.
12 en | Product Descrip tion Vide oJ et X1 0 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems 3.2 Sy stem Requir ements 3.2.1 General Requirements – Computer with Windows 2000.
Vide oJ et X1 0 Pr oduct Description | en 13 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 3.3 Over view of F unctions 3.3.1 Network Video Server The VideoJet X10 is a compact network video se rver for a connected video source.
14 en | Product Descrip tion Vide oJ et X1 0 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems 3.3.7 Remote Control For remote contro l of external units such as pa n or tilt he ads for cameras or motorized zoom lenses, control data is transmitted via the Vide oJet X10's bidirectional serial interf ace.
Vide oJ et X1 0 Pr oduct Description | en 15 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 3.3.13 Summary The VideoJet X10 offer s the following main functions: – Video an.
16 en | Product Descrip tion Vide oJ et X1 0 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems 3.4 Connections on the F ront Panel 1 USB 1/2 interfaces for future expans ion of functions 2V i d e o I n video input BNC socket for connecting the video source 3 Audio In audio line input 3.
Vide oJ et X1 0 Pr oduct Description | en 17 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 3.5 Connections on the Rear Panel 7E T H 1 RJ45 socket for connecting to an Ethern.
18 en | Product Descrip tion Vide oJ et X1 0 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems.
Vide oJ et X1 0 Installation | en 19 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 4 Installation 4.1 Preparations The VideoJet X10 features industrial standard equipment and is therefore suitable for both stationary installation and mobi le installation in vehicles.
20 en | Installation Vide oJ et X1 0 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems 4.3 Connections 4.3.1 Camera You can connect a video source to the VideoJ et X10. Any cameras and other video sources that produce a standard PAL or NTSC signal are suitable.
Vide oJ et X1 0 Installation | en 21 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 4.3.4 SFP Slot You can establish an additional network connecti on by inserting a mini-GBIC module into the SFP slot for example via fiber optic cables (OF).
22 en | Installation Vide oJ et X1 0 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems 4.3.7 Data Interface The bidirectional data interface is used to co ntrol units connected to the VideoJet X10, for example a dome camera with motorized lens.
Vide oJ et X1 0 Installation | en 23 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 4.3.9 Relay Outputs The VideoJet X10 has four relay outputs for swit ching external units such as lamps or alarm sirens. You can operate these relay outputs manu ally while there is an active connection to the VideoJet X10.
24 en | Installation Vide oJ et X1 0 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems 4.3.11 Backup Power Supply When used in mobile vehicles (for example public transport), the VideoJet X10 is usually switched on when the vehicle is started with the ignition key.
Vide oJ et X1 0 Installation | en 25 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 4.4 Po wer On/Po wer Off 4.4.1 Power Supply The VideoJet X10 does not have a power switch . Power is supplied via a separate unit. Connect the VideoJet X10 to the po wer su pply unit and plug this into the mains.
26 en | Installation Vide oJ et X1 0 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems 4.5.2 Configuring the VideoJet X10 You can start the Configuration Mana ger immediately after installation. 1. Double-click the icon on the desktop or st art the program via the Start menu.
Vide oJ et X1 0 Configuration Using a Web Bro wser | en 27 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 5 Configuration Using a W eb Bro wser 5.1 Connecting The integrated HTTP ser ver in the VideoJet X1 0 offers you th e option of configuring the uni t over the network with a Web browser.
28 en | Configuration Using a Web Brow ser Vide oJ et X1 0 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems 5.1.3 Establishing the Connection The VideoJet X10 must be assigned a valid IP addre ss to operate on your network. The following default addres s is preset at the factory: 192.
Vide oJ et X1 0 Configuration Using a Web Bro wser | en 29 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 5.1.5 Protected VideoJe t X10 If the VideoJet X10 is p assword prote.
30 en | Configuration Using a Web Brow ser Vide oJ et X1 0 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems 5.2.1 Starting Configuration X Click the S ETTINGS link in the upper section of the window. T he Web browser opens a new page with the configuration menu.
Vide oJ et X1 0 Configuration Using a Web Bro wser | en 31 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 5.3 Identification 5.
32 en | Configuration Using a Web Brow ser Vide oJ et X1 0 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems 5.5 Displa y Stamping Various overlays or "stamps" in the vide o imag e provide important supp lementary information.
Vide oJ et X1 0 Configuration Using a Web Bro wser | en 33 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 5.5.4 Alarm message Enter the message to be displayed in the image in the event of an alarm. The maximum text length is 31 characters.
34 en | Configuration Using a Web Brow ser Vide oJ et X1 0 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems 5.6 Password A VideoJet X10 is generally pr otected by a pass word to prevent unauth orized access to the unit. You can use different authorization levels ( User name ) to limit access.
Vide oJ et X1 0 Configuration Using a Web Bro wser | en 35 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 5.7 Language 5.7.1 Website language Select the language for the user interface here. 5.8 Date/Time 5.8.1 Date format Select your req uired date format.
36 en | Configuration Using a Web Brow ser Vide oJ et X1 0 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems 5.9.1 Unit time zone Select the time zone in which your system is located. 5.9.2 Daylight saving time The internal clock can switch automatically between normal and daylight saving time (DST).
Vide oJ et X1 0 Configuration Using a Web Bro wser | en 37 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 5.10 Picture Settings You can set the video image of the camera to su it your requirements. The current video image is displayed in the small window next to the sl ide controls as confirma tion.
38 en | Configuration Using a Web Brow ser Vide oJ et X1 0 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems 5.11 Encoder Profile For encoding the video signal you can select two profiles and ch ange the presets for the profiles.
Vide oJ et X1 0 Configuration Using a Web Bro wser | en 39 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 5.11.1 Active profile Here you can sele ct the desired p rofile for each of the two streams. Yo u will see a preview f or each data stream in the right section of the wi ndow.
40 en | Configuration Using a Web Brow ser Vide oJ et X1 0 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems 5.12 Profile Configur ation You can change individual parameter values wi thin a profile and you can also change the name.
Vide oJ et X1 0 Configuration Using a Web Bro wser | en 41 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 5.12.2 Target data rate You can limit the data rate for the VideoJet X10 to optimize utilization of the bandwidth in your network.
42 en | Configuration Using a Web Brow ser Vide oJ et X1 0 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems 5.12.8 I-frame distance This parameter allows you to set the intervals in which the I-frames will be coded. 0 means auto mode, whereby the video server inse rts I-frames as necessary.
Vide oJ et X1 0 Configuration Using a Web Bro wser | en 43 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 5.13 Video Input You can activate the 75 Ohm terminating resist ance for the video input on the VideoJet X10. The terminating resistance must be deactivated for the video signal to be looped through.
44 en | Configuration Using a Web Brow ser Vide oJ et X1 0 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems 5.14 Audio You can set the gain of the audio signals to suit your specific requirements.
Vide oJ et X1 0 Configuration Using a Web Bro wser | en 45 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 5.15 JPEG Posting You can save individual JPEG images on an FT P server at specific intervals. Yo u can then retrieve these images at a later date to reconstruct alarm events if required.
46 en | Configuration Using a Web Brow ser Vide oJ et X1 0 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems 5.15.3 Posting interval Enter the interval in seconds at which the images will be sent to an FTP server. Enter zero if you do not want any images to be sent.
Vide oJ et X1 0 Configuration Using a Web Bro wser | en 47 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 5.16 St orage Medium You can record the images from the camera co nnected to the VideoJet X10 on various local storage media or on an appropri ately configured iSCSI system.
48 en | Configuration Using a Web Brow ser Vide oJ et X1 0 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems 5.17 iSCSI If you select type iSCSI system as the storage medium, you th en need to set up a connection to the desired iSCSI system and set the configuration parameters.
Vide oJ et X1 0 Configuration Using a Web Bro wser | en 49 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 5.17.2 iSCSI LUN Map The LUN map displays the logical drives configur ed for the iSCSI system. The current user is displayed for each drive.
50 en | Configuration Using a Web Brow ser Vide oJ et X1 0 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems 5.17.9 Decoupling the Drive in Use Each drive can only be associat ed with one user. If a drive is already being us ed by another user, you can decouple the user and co nnect the drive with the VideoJet X10.
Vide oJ et X1 0 Configuration Using a Web Bro wser | en 51 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 5.18 Par titioning A partition must be set up fo r recordings of th e camera connected to the VideoJet X10; this is similar to the partitioning often found on comput er hard drives.
52 en | Configuration Using a Web Brow ser Vide oJ et X1 0 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems 5.18.1 Creating a Partition Creating a new partition is performed using separate windows in which information is presented to you and you are led step by step through th e necessary setti ngs.
Vide oJ et X1 0 Configuration Using a Web Bro wser | en 53 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 5.18.2 Saving Changes After you have made all necessary settings, you mu st transfer the settings to the unit and save them.
54 en | Configuration Using a Web Brow ser Vide oJ et X1 0 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems 5.18.4 Editing a Partition You can modify the configuration of the partition at any time. You can perform the required modificat ions in the Partition Properties window.
Vide oJ et X1 0 Configuration Using a Web Bro wser | en 55 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 5.18.7 Type of recording Select the requir ed recording type. In the case of Ring mode the recording proceeds continuously.
56 en | Configuration Using a Web Brow ser Vide oJ et X1 0 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems 5.18.10 Format You can delete all recordings in a partition at any time. X Click the Format button to delete all reco rdings in the partition.
Vide oJ et X1 0 Configuration Using a Web Bro wser | en 57 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 5.19 Recording Profiles You can define up to ten diff erent recordin g profiles.
58 en | Configuration Using a Web Brow ser Vide oJ et X1 0 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems 5.19.1 Standard profile From this field, you can select the encoder pr ofile to b e used for continuous record ing (see Section 5.
Vide oJ et X1 0 Configuration Using a Web Bro wser | en 59 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 5.20 Recording Scheduler The recording scheduler allows yo u to link the created recordin g profiles with the days and times at which the camera's images are to be recorded in the event of an alarm.
60 en | Configuration Using a Web Brow ser Vide oJ et X1 0 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems 5.20.1 Holidays You can define holidays that are not in the stan da rd we ek ly sc he du le on wh ic h r ec or di ng s a re to apply.
Vide oJ et X1 0 Configuration Using a Web Bro wser | en 61 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 5.21 Alarm Sources You can configure the alarm inputs of the VideoJet X10. 5.21.1 Alarm input Select Active high if the alarm is to be triggered by closing the contact.
62 en | Configuration Using a Web Brow ser Vide oJ et X1 0 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems 5.22 Alarm Connections You can select how the VideoJet X10 responds to an alarm. In the event of an alarm, th e unit can automatically connect to a pr e-defined IP address.
Vide oJ et X1 0 Configuration Using a Web Bro wser | en 63 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 5.22.4 Destination password If the remote station is password protected, enter the password here.
64 en | Configuration Using a Web Brow ser Vide oJ et X1 0 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems 5.22.9 SSL encryption The data for the connection, for example the pa ssword, can be securely transmitted with SSL encryption.
Vide oJ et X1 0 Configuration Using a Web Bro wser | en 65 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 5.23 VC A The VideoJet X10 features an integrated video content analysis (VCA), which can detect and analyze changes in the signal.
66 en | Configuration Using a Web Brow ser Vide oJ et X1 0 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems 5.23.1 Analysis Select the option On to activate the video content analysis. As soon as the video content analysis is acti vated, metadata are created.
Vide oJ et X1 0 Configuration Using a Web Bro wser | en 67 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 5.23.4 Sensitivity (MOTION+ only) The basic sensitivity of the mo tion detector can be adjusted for the environme ntal conditions to which the camera is subject.
68 en | Configuration Using a Web Brow ser Vide oJ et X1 0 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems 5.23.7 Tamper Detection You can reveal the tampering of cameras and vide o cables by means of various options.
Vide oJ et X1 0 Configuration Using a Web Bro wser | en 69 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 5.23.13 Scene too noisy Activate this function if tampering associat.
70 en | Configuration Using a Web Brow ser Vide oJ et X1 0 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems 5.24 Alarm E-Mail As an alternative to automatic connecting, alarm states can also be documented by e-mail. In this way it is possible to notify a recipient who does not have a video receiver.
Vide oJ et X1 0 Configuration Using a Web Bro wser | en 71 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 5.24.6 Attach JPEG from camera Click the checkbox to specify that JPEG images are sent from the camera. An enabled video input is indicated by a check mark.
72 en | Configuration Using a Web Brow ser Vide oJ et X1 0 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems 5.25 Alarm T ask Editor As an alternative to the alarm settings on the various alarm pages, you can enter your desired alarm functions in script form here.
Vide oJ et X1 0 Configuration Using a Web Bro wser | en 73 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 5.26 Relay Settings You can configure the switching be havior of the relay outputs. For each relay, you can specify an open switch relay (normally closed contac t) or a closed switch re lay (normally open contact).
74 en | Configuration Using a Web Brow ser Vide oJ et X1 0 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems 5.26.3 Relay follows If required, select a specific event that will tr igger the relay.
Vide oJ et X1 0 Configuration Using a Web Bro wser | en 75 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 5.27 COM1 You can configure the serial interface paramete rs (ora nge terminal block) to me et your requirements. 5.27.
76 en | Configuration Using a Web Brow ser Vide oJ et X1 0 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems 5.27.2 Camera ID If necessary, enter the ID of the peripheral you wish to control (for example a dome camera or pan/tilt head).
Vide oJ et X1 0 Configuration Using a Web Bro wser | en 77 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 5.28 Netw ork The settings in this screen are used to integr ate the VideoJet X10 into an existing network.
78 en | Configuration Using a Web Brow ser Vide oJ et X1 0 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems Changes to fields followe d by the Reboot link are transmitted to the unit by clicking the Set button; however, they will only be ac tivated once the unit is rebooted.
Vide oJ et X1 0 Configuration Using a Web Bro wser | en 79 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 5.28.7 HTTPS browser port If you wish to allow browser access on the netw ork via a secure connection, select an HTTPS b r o w s e r p o r t fr o m t h e l i st i f n e c e s sa r y .
80 en | Configuration Using a Web Brow ser Vide oJ et X1 0 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems 5.28.14 SNMP The VideoJet X10 supports the SNMP V2 (Simple Network Managemen t Protocol) for managing an d monitoring ne tw ork components, and can send SNMP messages (traps) to IP addresses.
Vide oJ et X1 0 Configuration Using a Web Bro wser | en 81 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 5.29 Multicasting In addition to a 1:1 connection between an en coder and a single receiver (unicast), the VideoJet X10 can enable multiple receivers to receive the video signal from an encoder simultaneously.
82 en | Configuration Using a Web Brow ser Vide oJ et X1 0 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems 5.29.1 Multicast address video 1 Enter a valid multicast address for each stream to be operated in multicast mode (duplication of the data streams in the network).
Vide oJ et X1 0 Configuration Using a Web Bro wser | en 83 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 5.30 Encr yption A special license, with which you will receive a corresponding activation key, is required to encrypt user data.
84 en | Configuration Using a Web Brow ser Vide oJ et X1 0 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems 5.30.1 Encryption 1. From the Encryption list field, select the On option to activate the encryption. Keys will then be generated for all data channels.
Vide oJ et X1 0 Configuration Using a Web Bro wser | en 85 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 5.31 V ersion Information The data on this page are for information pu rposes only and cannot be change d. Keep a record of these numbers in case technical assistance is required.
86 en | Configuration Using a Web Brow ser Vide oJ et X1 0 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems 5.32 L ivepage Configuration In this window you can cust omize the appearance of the LIVEPAGE to suit your requirements.
Vide oJ et X1 0 Configuration Using a Web Bro wser | en 87 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 1. Check the box for the items that ar e to be displaye d on the LIVEPAGE . The selected items are indicated by a check m ark.
88 en | Configuration Using a Web Brow ser Vide oJ et X1 0 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems 5.32.9 JPEG size You can choose between two given image sizes to display the M-JPEG image. 5.32.10 JPEG interval You can specify the interval at which the indi vidual images should be generated for the M- JPEG i mage.
Vide oJ et X1 0 Configuration Using a Web Bro wser | en 89 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 5.33 Syst em State The storage devices used by VideoJet X10 are mo nitored.
90 en | Configuration Using a Web Brow ser Vide oJ et X1 0 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems 5.34 L icenses You can enter the activation key to enable additional functions or software modules in this window. i NOTICE! The activation key cannot be deactivated again and is not transferable to other units.
Vide oJ et X1 0 Configuration Using a Web Bro wser | en 91 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 5.35 Maintenance 5.35.1 Firmware The VideoJet X 10 is designed in such a way that its functions and parame ters can be updated with firmware.
92 en | Configuration Using a Web Brow ser Vide oJ et X1 0 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems 5.35.2 Configuration You can save configuration data for the Vide oJet X10 on a computer and then load saved configuration data from a computer to the unit.
Vide oJ et X1 0 Configuration Using a Web Bro wser | en 93 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 5.36 F unction Test The VideoJet X10 offers a varie ty of configuratio n options. You s hould therefore check that it is functioning correctly after installation and configuration.
94 en | Configuration Using a Web Brow ser Vide oJ et X1 0 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems.
Vide oJ et X1 0 Operation | en 95 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 6 Operation 6.1 Operation with Microsof t Internet Explorer A computer with Microsoft Intern et Explorer (version 6.
96 en | Operation Vide oJ et X1 0 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems 6.1.3 Establishing the Connection The VideoJet X10 must be assigned a valid IP addre ss to operate on your network. The following default addres s is preset at the factory: 192.
Vide oJ et X1 0 Operation | en 97 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 6.2 The LIVEP AGE Once the connection is establis he d, the Web browser displays the LIVEPAGE . It displays the live video image on the right of the browse r window.
98 en | Operation Vide oJ et X1 0 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems 6.2.4 View Control Control options for peripherals (for example a pan/ti lt head or dome camera) depend on the type of unit installed and on the VideoJet X10's configuration.
Vide oJ et X1 0 Operation | en 99 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 6.2.7 System Log / Event Log The System Log field contains information about the op erating s tatus of th e VideoJet X10 and the connection. You can save these me ssages automatically in a file (see Abschnitt 5.
100 en | Operation Vide oJ et X1 0 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems 6.3 Saving Snapsho ts You can save individual images from the video sequence curr ently shown on the LIVEPAGE in JPEG format on your computer's hard drive.
Vide oJ et X1 0 Operation | en 101 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 6.6 The RECORDINGS Page The RECORDINGS page for playing back recorded vide o sequences can be acce ssed from the LIVEPAGE and from the SETTINGS menu.
102 en | Operation Vide oJ et X1 0 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems 6.6.2 Controlling a Playback You will see a time bar below the video image for quick orientation. If a particular sequence has been clicked and selected for playback, the selected s equence is marked in the list.
Vide oJ et X1 0 Operation | en 103 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 6.6.4 Slide Control You can use the slide control to control playba ck speed and fast forw ard/rewi nd: positioning in the middle indicates play back at recording speed, lef t indicates rewind, and right fast forward.
104 en | Operation Vide oJ et X1 0 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems 6.7 Backup You can back up the video sequences or single images saved on th e storage medium of the VideoJet X10 to the co mputer's hard drive.
Vide oJ et X1 0 Operation | en 105 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 6.8 Installing the Play er You can play back saved vide o sequences using the Playe r from Bosch Security Systems , which can be found on the pr oduct CD supplied (see Abschnitt 3.
106 en | Operation Vide oJ et X1 0 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems 6.9 Hardwar e Connections Between Video Ser vers You can easily connect a VideoJet X10 with a.
Vide oJ et X1 0 Operation | en 107 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 6.9.4 Connecting with a Terminal Program Various requirements must be me t in orde r to operate with a terminal program (see Abschnitt 8.8 Communication with Terminal Program , Seite 118).
108 en | Operation Vide oJ et X1 0 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems 6.10 Operation Using Sof tware Decoders The VideoJet X10 video server combin es with VIDOS to provide a high-performance system solution.
Vide oJ et X1 0 Maintenance and Upgrades | en 109 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 7 Maintenance and Upgrades 7.1 Testing the Netw ork Connection You can use the ping command to check the connection between two IP addresses.
110 en | Maintenance and Upgrades Vide oJ et X1 0 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems 7.3 Repairs Ensure that all maintenance or repair work is carried out only by qualified perso nnel (electrical engineers or network technology spec ialists).
Vide oJ et X1 0 Appendix | en 111 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 8 Appendix 8.1 T roubleshoo ting If you are unable to resolve a malfunction, plea se contact your supplier or systems integrator, or go directly to Bosch Secu rity Systems Customer Service.
112 en | Appendix Vid eoJ et X 10 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems 8.2 G eneral Malfunctions Malfunction Possible caus es Recommended so lution No connection between the unit and terminal program. Incorrect cable connections.
Vide oJ et X1 0 Appendix | en 113 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 The unit does not report an alarm. Alarm source is not selected. S elect possible alarm sources on the Alarm Sources configuration page. No alarm response specifie d.
114 en | Appendix Vid eoJ et X 10 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems 8.3 Malfunctions with iSCSI Connections Malfunction Possible caus es Recommended so lution After connecting to the iSCSI destin ation, no LUNs are displayed.
Vide oJ et X1 0 Appendix | en 115 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 8.4 LEDs The VideoJet X10 network video server has a number of LEDs on its front and rear p anels that show the operating status and can give indications of possible malfunctions: 8.
116 en | Appendix Vid eoJ et X 10 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems 8.5 Processor L o ad If the VideoJet X10 is accessed via the Web browse r, you will see the processor load indicator in the top left of the window ne xt to the manufacturer's logo.
Vide oJ et X1 0 Appendix | en 117 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 8.7 Terminal Block The terminal block has several contacts for: – 4 alarm inputs –4 r e l a y o u t p u t s – Serial data transmission 8.7.
118 en | Appendix Vid eoJ et X 10 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems 8.8 Communication with Terminal Program 8.8.1 Data Terminal If a VideoJet X10 cannot be found .
Vide oJ et X1 0 Appendix | en 119 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 8.8.4 Assigning an IP Address To use a VideoJet X10 in your network, you must as sign it an IP address that is valid for your networ k. The following default address is preset at the factory: 192.
120 en | Appendix Vid eoJ et X 10 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems.
Vide oJ et X1 0 Glossary | en 121 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 9G l o s s a r y Symbols 10/100 Base-T IEEE-802.3 specification for 10 or 100 Mbps Ethernet 802.1x The IEEE 802.1x standard provides a general method for authentication and authorization in IEEE-802 networks.
122 en | Glossar y Vide oJ et X1 0 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems HTTPS H ypertext Transfer Protoc ol Secure: encryp ts and authenticates co mmunication betwee.
Vide oJ et X1 0 Glossary | en 123 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 N Net mask A mask that explains which part of an I P address is the network addr ess and which part is the host address. It is usually written in dotted decimal notation, for example "2 55.
124 en | Glossar y Vide oJ et X1 0 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems Telnet Login protocol with wh ic h users can access a remote co mputer (Host) on the Internet TLS Transport Layer Security; TLS 1.0 and 1 .1 and the standard advanced developments of SSL 3.
Vide oJ et X1 0 Specif icat ions | en 125 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 10 Specifications 10.1 Unit Operating voltage 10 to 30 V DC, power supply via extern al unit Power consumption Approx.
126 en | Specifica tions Vide oJ et X1 0 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems 10.2 Prot ocols/Standards Video st andards PAL, NTS C Video coding pr otocols MPEG-4, M-JPEG, JPEG Video data rate 9.
Vide oJ et X1 0 Inde x | en 127 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 11 Inde x A Activating the recording 60 Activation key 90 Actuator 22 Alarm 17 , 32 , 98 Alarm .
128 en | Index Vide oJ et X1 0 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems Linear mode 55 Live video images 27 , 95 Livepage 86 Low Voltage Directive 8 Low-pass filter 37 M.
Vide oJ et X1 0 Inde x | en 129 Bosch Security Syst ems Installation and Operating Manual V3.0 | 2007.09 Termination 43 Test 93 Time 24 , 32 , 35 Time se rver 35 Time serv er IP address 36 Time server.
130 en | Index Vide oJ et X1 0 V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems.
.
Bosch Security Systems Robert-Koch-Straße 100 D-85521 Ottobrunn Germany Telefon 089 6290-0 Fax 089 6290-1020 www.bosch-securitysystems.com © Bosch Security Systems , 2007.
Ein wichtiger Punkt beim Kauf des Geräts Bosch Appliances X10 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Bosch Appliances X10 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Bosch Appliances X10 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Bosch Appliances X10 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Bosch Appliances X10 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Bosch Appliances X10 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Bosch Appliances X10 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Bosch Appliances X10. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Bosch Appliances X10 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.