Benutzeranleitung / Produktwartung A5 des Produzenten Bosch Appliances
Zur Seite of 142
DiBos 610–4.998.137.176 V ersion: A5 Date: 1 1–2004 INST ALLA TION MANUAL.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 2 –.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 3 – Safety instructions Important Safeguards 1. Read, Follow , and Retain Instructions – All safety and operating instructions should be read and followed before operating the unit.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 4 – Safety instructions (continued) 12. Grounding or Polarization – This unit may be equipped with a polarized alternating current line plug ( a plug with one blade wider than the other).
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 5 – Safety instructions (continued) For Indoor Product 1. W ater and Moisture – Do not use this unit near water – for example, in a wet basement, in an unprotected outdoor installation, or in any area classified as a wet location.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 6 – Safety instructions (continued) Safety Precautions CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN! CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 7 – T ABLE OF CONTENTS Section Page 1 Introduction 9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1 System Description 9 .
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 8 – T able of Contents (continued) Section Page 5 XP Administration 59 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.1 Changing from video system to XP administrator level 59 .
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 9 – 1 Introduction 1.1 System Description The video system is a digital monitoring system with which video images ca n be saved on location in order to transmit and evaluate them anyplace you designate regardless of distance and location.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 10 – Introduction (continued) 1.3 Recommended Virus Scanners/Firewalls Windows XP embedded is the operating system of the video system. The use of a virus scanner and a firewall is recommended.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 1 1 – Introduction (continued) 1.4 Component Overview System board VGA monitor 1.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 12 – Introduction (continued) 1.5 Laws/Norms/Guidelines Electromagnetic com- patibility (EMC) USA FCC Part 15, Class .
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 13 – 2 Computer Slots Installation of the internal hardware components of the computer may only be per- formed by the video system manufacturer . Any field configuration changes to the internal hardware will void the system warranty .
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 14 – 3 Quick installation For information about the device connections, please see Chapter 2. 1. Connect the mouse and keyboard (put ferrite on the cables). 2. Plug the 26–pin D–sub plug of the grabber cable on the corresponding plug of the grabber card.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 15 – Quick installation (continued) Logon as administrator No. Name Description 1 Name Enter the name here. Y ou have to logon in the video system with this name in the future to oper- ate the system.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 16 – Quick installation (continued) Display of the existing hardware The existing video hardware is displayed in this dialog box. No. Name Description 1 Grabber type: The built–in grabber type is displayed.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 17 – Quick installation (continued) Changing the camera name Y ou can change the camera name in this dialog box. No. Name Description 1 Click on the camera whose name you wish to change.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 18 – Quick installation (continued) Select storage method Y ou can determine the following for each camera in this dialog box: if a recording (storage of images) should take place and how many images per camera should be displayed.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 19 – Quick installation (continued) 3 Images per second Enter the number of images per second that are to be recorded in the Images per second box. Note: The system checks the plausibility of the config- ured recording rate here.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 20 – Quick installation (continued) Select the drive for storage and finish Basic Configuration. In this dialog box, select the drive for storage of the image data. No.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 21 – Quick installation (continued) Note: When finishing Basic Configuration, the system proceeds according to the fol- lowing convention: A ring archive is created for each camera (this can be overwritten).
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 22 – 4 Connections This section describes the following connections/installation: Grabber card MVT itan/MVSigma .
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 23 – Connections (continued) 4.1 Grabber Card MVTitan (max. 2) May only be executed by authorized trained personnel! .
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 24 – Connections (continued) J1 to J8 Position 1 –2 Relay contact N/O contact Position 4 –5 Common Position 2 –.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 25 – Connections (continued) 4.2 Grabber Card MVSigma May only be executed by authorized trained personnel! Pin 1 2 3.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 26 – Connections (continued) 4.3 Connection to a T oken Ring or Ethernet Network May only be executed by authorized trained personnel! In addition to the Ethernet connection on–board, there is an optional to- ken ring card available.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 27 – Connections (continued) Integration into a customer network with static assignment of IP ad- dresses (for Ethernet and token ring) Ask the system administrator for the IP and subnet address and proceed as follows: 1.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 28 – Connections (continued) 4.4 Connecting the ISDN Controller May only be executed by authorized trained personnel! The ISDN connection is established via a supplied adapter cable (with W estern connector) to the S o interface of the computer .
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 29 – Connections (continued) 4.5 Connecting the VSCom 200 H (Interface Expansion) May only be executed by authorized trained personnel! Note: only use the VSCom 200 H PCI card.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 30 – Connections (continued) 4.7 Connecting the Cameras Note that one input is needed per B&W and CCVS camera and two inputs per Y/C camera.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 31 – Connections (continued) 4.8 Connecting the V–DOG and T amper Contact May only be executed by authorized trained personnel! The module is used to monitor the tamper contact and power supply of the power unit.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 32 – Connections (continued) 4.9 Connecting the Software Dongle and the Printer The programs are protected against unauthorized use by a dongle. The system cannot be operated without this dongle.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 33 – Connections (continued) 4.1 1 Connecting the A TM via the Interface Processor (Serial) A maximum of 4 automatic teller machines or three automatic teller ma- chines and 1 access control system can be connected to the video sys- tem via an interface processor .
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 34 – Connections (continued) Method 2: Problem: The automatic teller machines (A TMs) are located further away from the video system.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 35 – Connections (continued) Method 3: Problem: The automatic teller machines (A TMs) are located further away from the video system.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 36 – Connections (continued) 4.12 Connecting the Barcode Reader 4.12.1 Barcode Reader V3300–N Only the barcode readers listed below should be used. With other types of barcode readers, you must check whether their protocol matches that of the video system.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 37 – Connections (continued) Selecting communication protocol Use the default protocol.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 38 – Connections (continued) 4.13 Connecting Foyer Card Reader MINITER RS 485 The foyer card reader MINITER RS 485 is connected via a serial inter- face. A maximum of four foyer card readers can be connected in series.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 39 – Connections (continued) Programming the foyer card reader MINITER RS 485 Programming is carried out using MINITER RS 485 software. This can be installed on a service laptop or on a video system.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 40 – Connections (continued) 7. Set dif ferent authorization for credit cards (track 2) and EC cards (track 3), so th.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 41 – Connections (continued) 4.14 Connecting Radio Clock DCF 77 May only be executed by authorized trained personnel! The connection must be made to a serial interface.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 42 – Connections (continued) 10. Make the following settings in the configuration menu: Language: ”German” Port: ”COM x” (interface in use) Synchronization: ”Automatic”.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 43 – Connections (continued) 4.15 Web Connection for Access Via Browser May only be executed by authorized trained personnel! The master disk contains the preinstalled W eb application for accessing the image archive via the browser .
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 44 – Connections (continued) 4.16 Connecting a Modem May only be executed by authorized trained personnel! Y ou must have administrator rights to carry out the following steps: 4.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 45 – Connections (continued) Enable dial–in (if incoming calls should be accepted) 1. From the Windows XP desktop, select ”Start → Control Panel”. 2. From the ”Control Panel” folder , select the ”Network Connections” icon.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 46 – Connections (continued) 4.17 Connecting AutoDome/SAE–Dome Connecting AutoDome RS 232 RS 232/BiPhase conver.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 47 – Connections (continued) Connecting SAE Dome directly RS 232 RS 232/RS 485 converter COM x video system i.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 48 – Connections (continued) 4.18 Connecting a Security System 4.18.1 General remarks The video system is connected to a SecSys via an RS 232 interface at COM x, e. g. by connecting an interface converter OVS in between.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 49 – Connections (continued) Jumper assignment for interface converter OVS V ariant 1: 1 2 3 1 2 3 1 2 3 1 2 3 C3: Pi.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 50 – Connections (continued) 4.18.2 Connecting to NZ 500 (20 mA) video system OVS SDI+ SDI– SDO+ SDO– C3 OPTO COM x 9 5 6 1 NZ 500 SU 500 Range max. 1000 m Only connect shield to NZ 500.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 51 – Connections (continued) 4.18.4 Connecting to AZ 1010/NZ 1008 V .
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 52 – Connections (continued) 4.18.5 Connecting to NZ 1012 V .24 connection to NZ 1012 Dip–Fix switches (S) and jumpers (V) on SSM NZ 1012 EAN SSM ZSN S3 S2 S0 V4 V2 Software versions: 18508.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 53 – Connections (continued) 4.18.6 Connecting to BZ 1012 (20 mA) BZ 1012 Range max.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 54 – Connections (continued) 4.18.7 Connecting to NZ 1060 V .24 connection to NZ 1060 NZ 1060 ZAN SIE ZVE Software versions: 18033.0 A6.2 18033.2 A6.2 SDO 0 V SDI 2 3 5 18033.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 55 – Connections (continued) 4.18.8 Connecting to BZ 1060 (20 mA) BZ 1060 Range max. 1000 m SDI SDO GOM +24V SDI SDO ZAB It is preferable to use interfaces 6 through 9, but connection to interfaces 2 through 5 is also possible depending on the project.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 56 – Connections (continued) 4.18.9 Connecting to UEZ 1000 (20 mA) OVS SDI+ SDI– SDO+ SDO– C3 OPTO 9 5 6 1 UEZ 1000 AV K Range max. 1000 m Only connect shield to UEZ 1000.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 57 – Connections (continued) 4.18.1 1 Connecting to UGM 2020 20 mA connection to UGM 2020 or TESP (by telephony) TESP SGK EPC/EPC2 Software versions: SGKUGM DLA0 DLB0 DLA1 DLB1 from EAPS–4 Jumper 1 – 4 open EAPS–5 OVS C3 OPTO 1 6 9 5 Range max.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 58 – Connections (continued) 4.18.12 Connecting to Bosch D9000 Series D9133 SDI–B Common Bosch D9000 COM x video sy.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 59 – 5 XP Administration 5.1 Changing from video system to XP administrator level May only be executed by authorized personnel! Proceed as follows in order to change from the video system to the XP administrator level.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 60 – 6 Configuration If you are starting the video system for the first time, a dialog box appears with the following configuration possibility: Basic configuration with the wizard The basic configuration is intended for inexperienced users.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 61 – Configuration (continued) 6.2 Standard configuration (expert configuration) 6.2.1 Configuration Drives (Database/drives menu) This dialog box shows you an overview of the hard drives and network drives available.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 62 – Configuration (continued) Note: Several drives can be made available for archives. In this case, the archive images are evenly distributed amongst the acti- vated drives.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 63 – Configuration (continued) 6.2.2 Configuration Archives (Database/archives menu) The archives presented in the overview box are located on the activated drives.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 64 – Configuration (continued) 6 T ype Select an archive type. For most applications, it is advisable to set up a separate archive for each camera. This enables a fast search in the image archive later .
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 65 – Configuration (continued) Used The available memory is indicated. If the total of all configured archives exceeds 90% of the entire avail- able memory , a message appears.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 66 – Configuration (continued) 6.2.3 Configuration of hardware connections (Hardware/connections menu) Y ou can set–up numerous hardware options in this dialog box.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 67 – Configuration (continued) 4 ISDN* When connecting to other systems of this type via ISDN 5 Network When connecting to other systems of this type via a network 6 Modem* For modem connections A RAS capable modem must be connected and RAS service must be installed.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 68 – Configuration (continued) 6.2.4 Configuration of automatic teller machine (option) (Hardware/automatic teller machine menu) A maximum of 4 automatic teller machines each with 2 alarm inputs can be con- nected (must be activated under Hardware/Connections).
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 69 – Configuration (continued) 6.2.5 Configuration of the foyer card reader inputs (option) (Hardware/foyer card read.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 70 – Configuration (continued) 5 Foyer card reader time controlled Activate Foyer card reader time controlled and implement the following settings.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 71 – Configuration (continued) 6.2.6 Configuration of the foyer–card reader lockouts (option) (Hardware/foyer card reader/lockouts menu) In this dialog box it is possible to lockout certain bank routing codes, i.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 72 – Configuration (continued) Deleting lockouts No . Name Description 3 Locked bank reference numbers Select the lockout you wish to delete from the list box. 4 Delete Click on Delete .
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 73 – Configuration (continued) 6.2.7 Configuration of barcode reader (option) (Hardware/barcode reader menu) Y ou can connect a barcode reader (must be activated under Hardware/Con- nections).
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 74 – Configuration (continued) 6.2.8 Configuration of security system inputs for Bosch D9000 Series (option) (Hardware/SecSys inputs menu) The serial connection of a Bosch D9000 Series SecSys allows for many Sec- Sys inputs to be assigned to each video system input.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 75 – Configuration (continued) 5 “Assignment of ad- dresses” dialog box Select the SecSys addresses that you would like to assign to the input and click OK . The address is assigned to the input.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 76 – Configuration (continued) 6.2.9 Configuration of security system inputs for Bosch alarm systems – excluding D9.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 77 – Configuration (continued) 4 Line status Click on Assign , in the Line status column if you would like to change or view the standard assign- ment of the line status (only for LSN security sys- tems).
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 78 – Configuration (continued) 6.2.10 Configuration of alarm simulation (Hardware/alarm simulation menu) Th e video system supports 4 alarm inputs, which can be simulated for triggering test alarms.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 79 – Configuration (continued) 6.2.1 1 Configuration of virtual detectors (Hardware/virtual detector menu) The virtual detectors offer the same functionalities as the other detectors in the system.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 80 – Configuration (continued) Note: External software can communicate with the virtual detectors via a COM interface (COM stands for Component Object Model). For a simple connection, please see a type library (V irtualInputs.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 81 – Configuration (continued) 6.2.12 Configuration of detector inputs (Hardware/Frame grabber/Detector menu With this dialog box you can activate and deactivate the contact inputs of the grabber card and select the stable state.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 82 – Configuration (continued) 4 Open contact Determine whether the alarm input should be an open or closed contact. The input is an open contact. The input is a closed contact.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 83 – Configuration (continued) 6.2.13 Configuration of cameras (Hardware/Frame grabber/camera menu) With this dialog box you can select which camera you would like to activate and which camera type it should be.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 84 – Configuration (continued) 4 Setup These settings can be set individually for each camera.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 85 – Configuration (continued) Image settings for all camera types Implement the setting for each camera as required. No. Name Description 1 Image settings Click on Image settings .
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 86 – Configuration (continued) Set the monitoring area for the sensor camera (movement detection) Implement the setting for each camera as required. No. Name Description 1 Motion detection Click on Motion detection .
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 87 – Configuration (continued) 4 Sensitivity Change the sensitivity if the results of the movement detection are not satisfactory . high The sensitivity is higher; i.e.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 88 – Configuration (continued) Set dome cameras Implement the setting for each camera as required.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 89 – Configuration (continued) Saving camera positions Y ou can set the positions of dome cameras to which you can automatically swivel time and time again. Users can quickly select these positions in the live image, provided they are authorized to do this.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 90 – Configuration (continued) Entering control commands via the command line Here using the command line you can specify different settings for dome cameras or matrixes that you can call up automatically again and again.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 91 – Configuration (continued) 6.2.14 Configuring relays (Hardware/Frame grabber/Relays menu) A maximum of 4 or 8 relay outputs can be connected to each MVT itan grabber card.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 92 – Configuration (continued) 6.2.15 Configuring IP cameras (Hardware/IP cameras menu) A maximum of 16 IP cameras (network cameras) can be connected. The IP cameras can also be connected to the available cameras through Frame grabber.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 93 – Configuration (continued) 4 Setup Click on Setup and implement the settings for each camera. Enter the following – Address (URL) of the camera under which JPEG images can be called up.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 94 – Configuration (continued) 6.2.16 Configuring time periods (T ime periods menu) T o ensure that jobs are activated at specific times, you can define dif ferent times for specific events, such as triggering a save job at certain times.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 95 – Configuration (continued) 4 T ime interval The times (from ... to) for the selected weekdays, holidays and special dates can be entered here. New A new time can be entered.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 96 – Configuration (continued) 6.2.17 Configuration of the ISDN connections (option) (Connections/ISDN menu) In this .
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 97 – Configuration (continued) 5 Incoming calls Activate the corresponding option .. only accept if in list of remote stations –if the system should check whether the calls are coming from a configured remote station.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 98 – Configuration (continued) 6.2.18 Configuring network connections (Connections/network menu) In this dialog box you can determine the video systems to which—via the network—a two–way connection should be connected.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 99 – Configuration (continued) 5 Incoming calls Activate the corresponding option .. only accept if in list of remote stations – if the system should check whether the calls are coming from a configured remote station.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 100 – Configuration (continued) 6.2.19 Configuring modem connections (Connections/modem menu) In this dialog box you can determine the video systems to which—via the modem—a two–way connection should be connected.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 101 – Configuration (continued) 4 Modem Select the connected modem in the Modem list box. 5 Password Click Password in order to change the RAS password for incoming calls.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 102 – Configuration (continued) 6.2.20 Configuring storage job macros (Job macros/save menu) Job macros, e.g. saving images automatically (so–called storage job macros), define sequences (jobs) that should either run continuously or when an alarm is triggered.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 103 – Configuration (continued) 6 T otal duration Activate the corresponding option As long as input status unchanged – if recording (with possible pauses) should be repeated as long as the input status of the alarm input exists.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 104 – Configuration (continued) 6.2.21 Configuring alarm transmission job macro (Job macros/alarm transmission menu) Job macros define sequences (jobs) that should either run continuously or when an alarm is triggered.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 105 – Configuration (continued) Configuring an alarm transmission job macro: No. Name Description 1 New Creates a new transmission job macro. Click on New and enter the name in the input box.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 106 – Configuration (continued) 7 Authorization level Select the authorization level. This job macro will only be available to the user with the authorization level selected.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 107 – Configuration (continued) 6.2.22 Configuring backup job macro (Job macros/backup menu) Job macros define sequences (jobs) that should either run continuously or when an alarm is triggered.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 108 – Configuration (continued) Configuring a backup job macro: No. Name Description 1 New Creates a new backup job macro. Click on New and enter the name in the input box.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 109 – Configuration (continued) 6.2.23 Configuration of job activations (Job activations menu) Any number of system reactions for the alarm inputs can be specified in this menu.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 1 10 – Configuration (continued) 6 T rigger Select the triggering criteria that are to trigger the job activation. Alarm The job is activated as soon as the alarm input is triggered.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 1 1 1 – Configuration (continued) 13 Priority Determine the priority of the job. Priority 1 (high) to priority 5 (low). Note: A priority can only be specified in connection with a job macro.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 1 12 – Configuration (continued) 6.2.24 Configuration of authorization levels (User management/authorization levels menu) Y ou can create dif ferent authorization groups in this menu if you have adminis- trator rights.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 1 13 – Configuration (continued) 4 Outp Dome Activate the check boxes of those elements (cameras, relays) that are to be avail able for the person with this authoriz ation level.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 1 14 – Configuration (continued) 6.2.25 Configuration of the users (User management/user menu) T o protect access to system components and data, operating procedures can only be carried out by logged–on users.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 1 15 – Configuration (continued) 5 Dual authorization Activate the function when the user is only allowed to login to the system together with another user . 6 Accept Click on Accept .
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 1 16 – Configuration (continued) 6.2.26 Configuration of options (Settings/options menu) This dialog box enables you to implement optional settings for the live image, the image archive and for an automatic disconnection.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 1 17 – Configuration (continued) 6.2.27 Configuration of security settings (Settings/security menu) Y ou have the option of implementing security settings in this dialog box, e.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 1 18 – Configuration (continued) 4 Key management for unique key This item is only to be carried out if you want to use a unique key . New – Generating a unique key: Click on New and enter a name for the encod- ing.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 1 19 – Configuration (continued) 6.2.28 Configuration of audio signals (Settings/audio signals menu) In this dialog box, you can allocate dif ferent audio signals to incoming mes- sages from network / modem and ISDN connections.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 120 – Configuration (continued) Deleting an audio signal: No. Name Description 1 Incoming connections Select the connection whose audio signal you wish to delete. 3 Reference The wav file is displayed to you in the Reference text box located there.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 121 – Configuration (continued) 6.2.29 Configuration of the dongle (Settings/dongle menu) In this dialog field, you c.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 122 – Configuration (continued) 6.2.30 Administration configuration (Administration menu) This dialog box contains the following options: No. Name Description 1 Configuration data Save The configuration can be saved on the network drive or data medium.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 123 – Configuration (continued) 4 Upload of the holiday program Y ou have the option here to adapt the holidays for the time program according to specific countries. The adjustment must be made in the Holidays.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 124 – 7 Startup Proceed as follows to start up the computer: Switch on the PC Check ISDN connection Check grabber dri.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 125 – Startup (continued) 7.1 Connecting the System Components See Section 4. 7.2 Activating External Hard Disks External hard disks must be activated before starting up the PC.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 126 – Startup (continued) 7.5 Checking the Optional Network Connection Networking details The following details are r.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 127 – Startup (continued) 7.6 Checking the Grabber Driver Make sure the grabber driver has started. 1. Start up your computer as far as the live image. 2. Exit the video system as the Administrator .
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 128 – Startup (continued) 7.8 Checking the Optional A TM Connection The data telegram between the video system and A TM can be checked using the ”Hyper T erminal” program in Windows XP .
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 129 – Startup (continued) 7.9 Checking the Optional W eb Connection Check whether access can be obtained after activating the web applica- tion whether access can actually occur .
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 130 – 8 Fault Indication/Correction This section contains notes on faults that may occur when first starting up or during operation. If you cannot determine the cause of the fault, please contact ”Product Service V ideo” of the video system manufacturer .
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 131 – 9 Maintenance and Service 9.1 Maintenance T asks to be Carried Out Perform the following maintenance tasks: .
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 132 – Maintenance and Service (continued) Attention: All work carried out on the system that can interfere with recording may only be carried out after consulting the customer .
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 133 – Maintenance and Service (continued) 9.3 Error Forwarding Three methods are pre–configured and provided as examples. The ”er- ror_forwarding.cmd” file contains calls for all methods.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 134 – Maintenance and Service (continued) 9.3.3 Sending an SMS If the computer is connected via an ISDN or analog modem with the tele- phone network, an SMS can be sent (not possible with T–DSL).
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 135 – Maintenance and Service (continued) 9.4 T roubleshooting The following faults have to be rectified if necessary: Counter light If recordings show impairment due to counter light, either block out the light source, e.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 136 – 10 T echnical data V ideo System in 19” Housing Operating system Windows XP Hard disk 120 GB minimum RAM .
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 137 – T echnical Data (continued) Grabber card MVTitan max. 2x V ideo inputs 16 Contact inputs 16 (either N/C contact or N/O contact) Relay outputs 8 (or 7x output and 1x fault indicator for 1st grabber card) Compression rate Can be set between 10 .
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 138 – 1 1 End user license agreement (EULA) Y ou have acquired a device (DiBos) that includes software licensed by Bosch Secu- rity Systems from Microsoft Licensing Inc.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 139 – End user license agreement (continued) Limitations on Reverse Engineering, Decompilation, and Disassembly .
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 140 – Notes.
Installation Manual for DiBos Video System A5/1 1–2004 610–4.998.137.176 – 141 – Notes.
610–4.998.137.176 V ersion: A5 Date: 1 1–2004 Bosch Security Systems,Inc. 850 Greenfield Road Lancaster , P A 17601 U.S.A. T el: 800–326–3270 Fax: 1–717–735–6560 Bosch Security Systems B.
Ein wichtiger Punkt beim Kauf des Geräts Bosch Appliances A5 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Bosch Appliances A5 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Bosch Appliances A5 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Bosch Appliances A5 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Bosch Appliances A5 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Bosch Appliances A5 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Bosch Appliances A5 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Bosch Appliances A5. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Bosch Appliances A5 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
