Benutzeranleitung / Produktwartung K1200 des Produzenten BMW
Zur Seite of 31
Owner’ s Manual, ComSystem K1200 L T BMW of North America, LLC W oodclif f Lake, New Jersey 07677-7731 © 2001 BMW of North America, LLC Logo and trademark are registered Printed in U.
1 W elcome to BMW The BMW ComSystem has been developed to provide riders of BMW K 1200 L T models the most advanced sound and communications management system.
2 In the interest of your personal safety , please r ead this operating manual and particularly the safety notes carefully and in full. Safety Notes The following symbols are used in this operating ma.
3 Check the volume control position of your ComSystem prior to use. If in doubt about the correct setting, turn the volume control counter -clockwise to a minimal level prior to turning on ignition to avoid excessively loud volume when the motorcycle ignition is turned on.
4 Never dial the telephone while riding, unless you have a voice- controlled dialing phone service and the driving situation permits. Note: Only press the transmit button when you really want to transmit via two- way radio.
5 Overview The audio management of the K 1200 L T consists of inputs and outputs fr om numer ous standard and optional devices. T o gain the most benefit from the system, it is necessary to understand what functions are available.
6 1. Auxiliary Audio Input 2. Fairing Speaker / Headset Switch 3. Inter com V olume 4. FRS Radio Input 5. Intercom VOX Sensitivity 6. Cell Phone Input 7. FRS or CB T ransmit Select Switch Motorcycle Connections / Controls 8. Rider T ransmit (PTT) Push-T o-T alk Button for FRS or CB radio 9.
7 Rider / Passenger Intercom Operation The ComSystem intercom is a voice activated system that allows seamless communication between rider and passenger .
8 • The intercom will mute the music from all audio sources when VOX is engaged, and return the music 3.5 seconds after the last VOX input is received. The 3.5 second delay spans the natural gaps that occur from voice inflections and minor turns of the head (away from microphone) that occur while riding.
9 Auxiliary Audio Input The ComSystem provides a port to connect auxiliary audio players (such as MP3 devices) to the audio channel (Level 1). Requirements • Connect the accessory audio device using a connection cable BMW PN 99 99 0 000 204 (short) or 99 99 0 000 205 (long), which has a 3.
10 Cellular T elephone The ComSystem provides an input for cellular phone communication. Given the increased emphasis / local legislation requiring the use of cellular phone headsets while driving a c.
11 oddments compartment. A longer cable is available PN 99 99 0 000 203 to allow placement of the phone in the optional tank utility pouch 71 60 2 342 670.
12 Operation of (FRS) Family Channel Radio Requirement • A FRS radio such as the Kenwood FreeT alk™ (BMW PN 99 99 0 000 041) and corresponding adapter cable (BMW PN 99 99 0 000 199) are required. Several different adapter cables have been developed for the most popular FRS radios (see page 23).
13 • Incoming FRS radio transmissions will activate the intercom system, mute the music (Level 1), and will be heard by rider and passenger . Rider and passenger can discuss what is being heard from the FRS or CB radio without that conversation be transmitted.
14 particularly true of CB, which is AM band (FRS is FM). Therefore, expect less range in mountain areas, greater range in plains areas. Note: For maximum enjoyment of the system, it is imperative that the helmet headset microphone placement be correct, as advised in the headset installation instructions.
15 Operation of (CB) Citizen Band Radio Requirement • A CB radio such as the Midland™ 75-830 CB radio kit (BMW PN 99 99 0 000 196) available from your BMW r etailer . • We recommend that the CB radio kit be installed by your BMW retailer . • The BMW CB antenna kit BMW PN 99 00 0 001 050 / 051 mast and base is required.
16 desired channel. Y ou can select memory functions to remember specific channels. • With intercom volume set at your normal level, adjust the volume of the CB radio to be received at a comfortable level. Use the CB radio volume control to do this (you need to receive a real transmission to do this) before the ride begins.
17 Note: If you receive a cell phone call while riding with the FRS or CB radio in use, the cell phone will mute all Level 1 & 2 communications. How- ever , if (out of habit) you press the PTT button while talking on the phone (something you should not do), that portion of your phone conversation could be transmitted over the FRS or CB radio.
18 Accessory Audio W ar ning Device or GPS BMW has provided a special connection plug in the wiring harness of the ComSystem for connection of an Accessory Audio Warning Device (AAWD) and GPS. Requirements • A GPS system with audio output signal and / or AAWD with audio output signal.
19 volume control to do this (you need to receive a real transmission to do this) before the ride begins. • AAWD or GPS volume level must be set high enough to trigger the audio circuit. V ery low volume levels may produce a “choppy” audio response.
20 Communication Options BMW has developed a wide range of communications options to assist riders with their communications needs. Please review the following items to learn more about BMW communications.
21 1983 - 2001 Kawasaki audio BMW PN 99 99 0 000 030 1986 - 1989 Suzuki audio BMW PN 99 99 0 000 030 1988 - 2000 Honda GL1500 w/J & M passenger control panel BMW PN 99 99 0 000 030 BMW FreeT alk™ Headset Har ness BMW has produced a special harness that connects the BMW helmet headset directly to the Kenwood Fr eeT alk™ FRS radio.
22 BMW ComSystem Parts Listing Main Kits 99 99 0 000 186 ComSystem - Kit Complete (includes main control unit and complete wiring harness) 99 99 0 000 187 ComSystem - Kit Complete for Retrofit of BC1 .
23 99 99 0 000 199 ComSystem - Kenwood FreeT alk™ FRS Adapter Harness 99 99 0 000 200 ComSystem - Motorola T alk-About™ FRS Adapter Harness 99 99 0 000 201 ComSystem - Motorola T alk-About™ (T -.
24 T echnical Data Current Draw System / ignition off Zero System on / standby 100 mA (no audio, no transmission, external music switch off) Maximum (with CB transmission) 1.
25 Frequency Impedence Sensitivity Maximum Input from FRS Radio 1 kHz 100 Ω -35 dbm +10 dbm Input from CB Radio 1 kHz 100 Ω -25 dbm +10 dbm Input from Cell T elephone 1 kHz 1 k Ω -40 dbm -10 dbm.
26 Part # 99 99 0 000 191 Replacement Wiring Harness 2 - Rear Part # 99 99 0 000 190 Replacement Wiring Harness 1 - Main.
27 Part # 99 99 0 000 192 Replacement Wiring Harness 3 - Front Part # 99 99 0 000 199 Kenwood FreeT alk Adapter Har ness.
28 Part # 99 99 0 000 200 Motor ola T alk-About Adapter Har ness Part # 99 99 0 000 201 Motor ola T alk-About (T Series) Adapter Har ness.
29 Part # 99 99 0 000 196 ComSystem CB Wire Diagram.
Owner’ s Manual, ComSystem K1200 L T BMW of North America, LLC W oodclif f Lake, New Jersey 07677-7731 © 2001 BMW of North America, LLC Logo and trademark are registered Printed in U.
Ein wichtiger Punkt beim Kauf des Geräts BMW K1200 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie BMW K1200 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für BMW K1200 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von BMW K1200 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über BMW K1200 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon BMW K1200 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von BMW K1200 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit BMW K1200. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei BMW K1200 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
