Benutzeranleitung / Produktwartung GE344000-01 des Produzenten Actiontec electronic
Zur Seite of 87
U ser Manual Wir eless C able/DSL Router.
i T able of C ont ents 1I nt ro duc tion 1 P ackage Contents 1 M inimum System Requirements 1 Router F eatures 2 T echnical Support 4 2C onnecting the Router 5 Ethernet Connection 5 USB Connection 6 3.
ii Ac tion tec Wireless-Ready DSL Gatewa y User Manual AS pecifications 39 G eneral 39 Wireless Operating Range 40 Environmental 40 BC onfiguring T CP/IP 43 Windows 95, 98, and Me 43 Windows NT 4.
1 Intr oduc tion Thank you for pur chasing the Ac t ion te c W ireless Cable/DSL Router . This Router is the simplest way t o connect a number of computers t o a single hig h-speed broad- band modem. This easy-to-use product is perf ect for the home office or small business.
2 Ac tion tec Wireless Cable/DSL Router U ser Manual Router F eatures The Router has a series of infor mational LED s (lights) on its front panel, and a variety of ports on its rear panel. I t is recommended that the user become familiar w ith these features before installing or setting up the R outer .
3 Chapter 1 Introduction Wireless LED Wh en the W ireless LED gl ow s steadily , the Router is read y for wireless network- ing. L AN LED The LAN LED gl ow s green when the Rout er is successfully c onnected to a com- puter with the yellow (E thernet) cable.
4 Ac tion tec Wireless Cable/DSL Router U ser Manual C able/DSL Port The Red port is used to connect the Rout er to a cable or DSL modem with an Ether net cable. USB Port The Purpl e po r t is used t o c o nnect the R ou t er t o a c o mpu t e r on the home net- wo rk w ith the Purple (Ethernet) cable.
5 C onnec ting the Router The Router can be ph ysically connected to the c omputers in two ways: by Ethernet cable, or USB cable, as well as wirelessly . Select the type of connection and follo w the instructions. Et hernet Connection 1. Start up the computer .
6 Ac tion tec Wireless Cable/DSL Router U ser Manual USB C onnection 1. Start up the computer . 2. Co nnect the square plug of the pur ple cable to the port labeled “ USB ”o n the back of the Router . Connect the r ectangular plug of the blue cable to a USB port on the co mputer .
7 Basic Setup This section is a guide through a basic configuration of the R0uter , including ho w to co nnect the Router to the ISP . Basic Setup To co nfigure the r outer for basic operation: 1. Open the W eb br owser . I n the address bar , enter http://192.
8 Ac tion tec Wireless Cable/DSL Router U ser Manual 4. Co mplete the three steps list ed in the “Basic Setup” screen, then click N ext . 5. Select either DSL Option 1 , DSL Op tion 2 ,o r Cable (depending on what kind of broadband service is receiv ed) in the “Broadband Connection ” screen , then click N ext .
9 Chapter 3 Basic Setup 6a. If DSL Option 1 is sele ct ed ,e nter the user name and password pro vided by the ISP in the “DSL Broadband C onnection - PPP oE” screen. Click N ext . 6b . If DSL O ption 2 is selected, go directly to step 7. DSL Option 2 should only be selected if the Router cannot connect using DSL Option 1 6c.
10 Ac tion tec Wireless Cable/DSL Router U ser Manual 8. The “C ongratulations” screen appears. The R outer is successfully co nfigured. The power LED flashes rapidly while the R outer restarts, then glows steadily green when fully operational. The R outer is now configured and users can start surfing the W eb .
11 Ad v anc ed S etup This section contains information conc er ning advanced c onfigur ation, such as wi re less settings, remote management, and W eb site blocking. Acc essing Advanc ed Setup To access the A dvanced Setup configuration scr eens, follow these instructions: 1.
12 Ac tion tec Wireless Cable/DSL Router U ser Manual 4. In the next screen, read the rec ommendations. T o perform an advanced setup on the Router , click Begin Ad vanced Setup . 5. The “Configuring the Advanced Settings” screen appears. T o check all the set- tings, or if unsure of w hich settings to modify , select N ext .
13 Chapter 4 Adv anced Setup Af te r selecting a connection ty pe, click N ext to co ntinue configuring the connection. Obtain an IP Address thr ough PPPoE Select this option to allow the R outer to use the P oint-to-P oint over Ethernet pro- toc ol.
14 Ac tion tec Wireless Cable/DSL Router U ser Manual User Name and Password If a Us e r N ame and P assw ord was enter ed during Basic Setup, it should be dis- play ed in the “Broadband Co nnection via PPP oE ” screen. If not, ent er the informa- tion now .
15 Chapter 4 Adv anced Setup Specify a Static IP Addr ess Select this option if assigned a static (specific) IP A ddr ess by the Internet Se rv ice Prov i der ( ISP) . Enter the IP A ddr ess , along with the Su bn et M ask and Default Gateway A ddress (also provided by the ISP ), in the “Broadband C onnection via Static IP A ddr ess” screen.
16 Ac tion tec Wireless Cable/DSL Router U ser Manual ESSID ESSID is the network name assigned to the wireless network. The factory default setting is “ A CTIONTEC .” Althoug h Ac t ion te c recommends k eeping the default value intact, the ESSID value can be modified, using an y combination of alphanu- meric characters (i.
17 Chapter 4 Adv anced Setup 64-bit WEP 64-bit WEP re quires four separate keys. Each key comprises five he xadecimal digit pairs. A hexadecimal digit consists of an alphanumeric character rang ing from 0-9 or A-F . An example of a 64-bit WEP ke y is: 4E-A3-3D-68-72.
18 Ac tion tec Wireless Cable/DSL Router U ser Manual Wir eless MAC A uthentication Selecting Wi re less MA C A uthenticat ion in the “ Ad vanced Configuration ” screen generates the “W ireless MA C A uthentication ” screen. Her e, the user can manage the access other wireless networking devices hav e on the w ireless network.
19 Chapter 4 Adv anced Setup L AN IP Address Selecting LAN IP A ddr ess in the “ Advanced C onfiguration ” screen generates the “ LAN IP A ddress” screen. The value in the LAN IP A ddress te xt bo x is the IP address of the Router as seen on the network.
20 Ac tion tec Wireless Cable/DSL Router U ser Manual Ac t ion te c strongly recommends leaving the DHCP Server option On .I f the DHCP Server option is Off ,e nsure the IP addr esses of the networked c omputers are on the same subnet as the IP address of the Router .
21 Chapter 4 Adv anced Setup DNS Server 1 - the primar y DNS ser ver pr ovided by the Int ernet Serv ice Pr ovider ( ISP) .I f the ISP provided DNS ser ver informa- tion, enter it here. If not, lea ve the text bo x intact. DNS Server 2 - the secondary DNS provided by the Int ernet Service Prov i der ( ISP) .
22 Ac tion tec Wireless Cable/DSL Router U ser Manual Netmeeting To allow the computers on the R outer’ s network to access N etmeeting , enter the Ne tm eeting IP address in the IP te xt bo x, then select On .I fN etmeeting is not needed, select Off .
23 Chapter 4 Adv anced Setup VPN Pass Through Selecting VPN P ass Through in the “ Ad vanced Configuration ” screen generates the “ VPN P ass Through ” screen. T o set up Virtual Private N e tworking ( VPN ) using IPS ec/ L 2 TP (which allows m ultiple, client-initiated VPN pass-through sessions), select On .
24 Ac tion tec Wireless Cable/DSL Router U ser Manual Po rt Fo rw arding Selecting Po r t Fo r warding in the “ Advanced C onfiguration ” screen generates the “P or t Forwarding ” screen.
25 Chapter 4 Adv anced Setup DMZ Hosting Selecting DMZ H osting in the “ Advanced C onfiguration ” screen generates the “ DMZ H osting” screen. T o use DMZ hosting, enter the IP address of the computer on the network to be used as a DMZ host in the “ DMZ H ost IP Addr ess” text bo x, then click On .
26 Ac tion tec Wireless Cable/DSL Router U ser Manual Fir ew all Selecting Firewall in the “ Ad vanced Configuration ” screen generates the “ Firewall Security Level ” screen. Select the level of secur ity needed for the network. See Ap pendix E for details concerning each level of securit y .
27 Chapter 4 Adv anced Setup Static Routing Selecting Stat ic Routing in the “ Advanced Settings ” screen generates the “Static Ro uting” screen. Enter the addresses in their r espective t ext bo xes, then click Add . The address will appear in the “Static Routing T able.
28 Ac tion tec Wireless Cable/DSL Router U ser Manual Status Af te r configuring the Router , settings can be viewed by selecting Status in the M ain M enu.
29 Chapter 4 Adv anced Setup 2. Fr om the Setup/Configuration screen, select Change Admin Passwor d . 3. The “Change Admin P assword” screen appears. Enter the new passwor d in the “N ew P asswor d” text bo x, then ent er it again in the “Re-ent er New P assword” text bo x.
30 Ac tion tec Wireless Cable/DSL Router U ser Manual.
31 Utilities To access the Rout er’ s utilities select Ut ilities from the “Main M enu ” screen. The “Utilities ” screen appears. Fr om here, the W eb activity log can be v iewed, the Router’ s factor y default settings r estored, and the Router’ s firmwar e upgraded.
32 Ac tion tec Wireless Cable/DSL Router U ser Manual Restore Default Settings To r est ore the Rout er to its factor y default settings, select R estore Default Settings from the “U tilities” screen. W hen the “Rest ore Default Settings” screen appears, click R estore Default Settings .
33 Tr oubleshooting This chapter c ontains a list of problems that ma y be encounter ed while using the Ro uter , and solutions t o over come the pr oblem.
34 Ac tion tec Wireless Cable/DSL U ser Manual If still disconnected, click Setup at the top of the page and go through the Basic setup to co nfigure the rout er for your c onnection to the Int ernet. Mak e the appropriate selections for DSL/Cable, Ethernet/USB and Us ername/Passw ord.
35 Chapter 6 Tr oubleshooting 3. Click Ad v anced and in the “Property” list find an entr y for speed or media ty pe and click it to highlight it. T o the right of that should be a “V alue” drop down menu. Click on the drop down arrow and then click on Aut o, Au t oselect, o r A uto sense in that menu.
36 Ac tion tec Wireless Cable/DSL U ser Manual O ther Problems L AN Connection F ailure Ensure the R outer is properly installe d, the LAN connections are co rrect, and the powe r is on. Co nfirm the computer and R outer are on the same netw ork segment.
37 Chapter 6 Tr oubleshooting Unable to get an IP address from Cable/DSL Modem. Ensure the R outer is properly c onnected to the c omputer and is plugged in. Tu rn off the cable/DSL modem and wait a few seconds. T urn the modem back on, wait for it to go through its self-test, then check for the IP address.
38 Ac tion tec Wireless Cable/DSL U ser Manual.
39 Specifications G eneral Model Number GE344000-01 (Single-P ort W ireless Cable/DSL Rout er) Standards IEEE 802.3 (10BaseT) IEEE 802.3u (100BaseTX) IEEE 802.
40 Ac tion tec Wireless Cable/DSL Modem U ser Manual Wir eless Operating Range Indoors Up to 30M (100 ft.) @ 11 Mbps Up to 50M (165 ft.) @ 5.5 Mbps Up to 70M (230 ft.) @ 2 Mbps Up to 91M (300 ft.) @ 1 Mbps Outdoors Up to 152M (500 ft.) @ 11 Mbps Up to 270M (885 ft.
41 App endix A Specifications.
42 Ac tion tec Wireless Cable/DSL Modem U ser Manual.
43 C onfiguring T CP/IP To co nfigure c omputers using operating systems other than W indows XP (for W indows XP instr uctions, see “Before Connecting”), choose the operating system and follow the.
44 Ac tion tec Wireless Cable/DSL Router U ser Manual 4. Select TC P/IP from the “The following network components are installed” list bo x, then click Prop er t ies .I f T CP/IP is not list ed, add it by clicking Add … and following the prompts.
45 App endix B C onfiguring T CP/iP 6. Select Gateway .I f there is an IP addr ess in the “Installed gatewa ys” list bo x, click on it, then click Re move .
46 Ac tion tec Wireless Cable/DSL Router U ser Manual 7. Select DNS Co nfiguration , then click Disable DNS . 8. Select WINS Co nfiguration . Ensure U se DHCP for WINS R esolution is acti- vated, and Disable WINS R esolution is not activated.
47 App endix B C onfiguring T CP/iP 9. Click OK and, in the “N etwork” window , select Id entificat ion . The “Identification ” tab contains thr ee text bo xes: Co mputer N ame - Enter the name of the computer (i.e., M yComputer , J ohn, CPU654) in this text bo x.
48 Ac tion tec Wireless Cable/DSL Router U ser Manual 11. The “Syst em Settings Chang e” w indow appears. Click Ye s to r estart the com- puter . ☞ Not e :I f the “Syst em Settings Change” w indow does not appear , r estart the computer manually after c ompleting step 10.
49 App endix B C onfiguring T CP/iP 3. Wh en the “N etwork ” w indow appears, select Id entificat ion . 4. In the “Identification ” tab, enter a Co mputer N ame (if needed) and Wo r k gr oup in their respective t ext bo xes. 5. R estar t the computer .
50 Ac tion tec Wireless Cable/DSL Router U ser Manual 7 .I n the “N etwork Serv ices ” list box, ensure the following ser vices are listed: Co mputer Bro wser , RPC Co nfigurat ion , Server , and Wo r kstation .T hese serv ices should be present after a T CP/IP installation.
51 App endix B C onfiguring T CP/iP 8. Select Pr ot ocols and verify TC P/IP Pr ot ocol is listed in the “Network Pr otocols ” list bo x. If not, add it by clicking Add … and following the prompts. 9. Select TC P/IP Pro t ocol in the “N etwork Prot ocols ” list box and click Prop er t ies .
52 Ac tion tec Wireless Cable/DSL Router U ser Manual 10. Wh en the “Micr osoft T CP/IP” w indow appears, select IP A ddress . 11. Click Ob tain an IP A ddress from a DHCP Se rver .
53 App endix B C onfiguring T CP/iP 12. Select WINS A ddress and ve rify the only entr y in the “ Adapt er” list box is the E thernet adapte r installed in the compute r . 13. Select Ro u t ing ,v e r ify Enable IP For warding is not che cke d, then click OK to re turn to the “Netwo rk” window .
54 Ac tion tec Wireless Cable/DSL Router U ser Manual 14. Wh en the “N etwork” w indow appears, click A dapters and v erify the installed E thernet adapte r is listed. If the card is not listed, add it by clicking Add… and following the prompts.
55 App endix B C onfiguring T CP/iP 15. Click the B indings tab, select All Ser vices from the “Sho w Bindings for” drop- down list, and verify T CP/IP is bound to the Ethernet adapter , as shown below .
56 Ac tion tec Wireless Cable/DSL Router U ser Manual 17. Select All Adapters from the “Show Bindings for” drop-do wn list in the “Bindings” tab and expand all entr ies shown by clicking the plus signs ( + ).
57 App endix B C onfiguring T CP/iP 18. R estar t the computer . After the co mputer restarts, verify the settings. Click Start , Pr og r ams and Co mmand Prompt .A t the command prompt, enter: ipconfig /all Ve r ify an IP addr ess was recei ved, then close the window .
58 Ac tion tec Wireless Cable/DSL Router U ser Manual 3. Fr om the “N etwork and Dial-U p Connections” window , double-click Local Area Co nnect ion Status .
59 App endix B C onfiguring T CP/iP 5. In the “C onnect using” text box of the “Local Ar ea Connection P roperties” w indow , the Ethernet adapter used b y the Local Ar ea Connection is displayed.
60 Ac tion tec Wireless Cable/DSL Router U ser Manual 4. Wh en the Inte rnet Prot ocol ( T CP/IP ) Pr operties w indow appears, ensure both Ob tain an IP address automatically and Ob tain DNS ser ver address auto- matically are activated. If not, click their r espectiv e radio buttons.
61 App endix B C onfiguring T CP/iP Macintosh The Router supports both the Classic Macint osh operating systems (9.2.1 and below), as well as OS X . ☞ Not e :W hen installing any softwar e, consult the user manual and help files supplied with the software for detailed information.
62 Ac tion tec Wireless Cable/DSL Router U ser Manual 4. Select U sing DHCP Ser ve r from the “ Configure ” drop-do wn list. 5. Ensure the “Use 802.3” option is not checked. 6. Disregard an y addresses in the IP A ddress text bo xes. They w ill be reac quired when the first connection is made.
63 Sharing F iles and Prin ters The Router supports file and printer sharing, allowing an y compute r on the net- wo rk to share files and acc ess a shared printer . T o configure file and printer shar- ing, select the operating system and follo w the inst ructions.
64 Ac tion tec Wireless Cable/DSL Router U ser Manual 4. In the “Select Netw ork Component T ype” window , select Serv ice in the “Click the ty pe of network component y ou want to install” list box, then click A dd… . 5. The “Select N e twork Serv ice ” window appears.
65 App endix C Sharing Files and P rinters 7. The “N etwork” window reappears. Select Id ent ification . The “Identification ” tab contains three t ext bo xes: Co mputer N ame - Enter the name of the computer (i.e., M yComputer , J ohn, CPU654) in this text bo x.
66 Ac tion tec Wireless Cable/DSL Router U ser Manual 8. Select Co nfiguration .I n the “Primar y Network Logon ” list box, ensure Client for Microsoft N etworks is selected. I f not, select it from the drop- down list, then click OK . 9. The “Syst em Settings Chang e” w indow appears.
67 App endix C Sharing Files and P rinters 11. Right-click the file or drive to share. In the pop-up menu that appears, select Shar ing . 12. Select Shared As from the “File Share Screen Pr operties” w indows and ent er a name in the “Share N ame” text box.
68 Ac tion tec Wireless Cable/DSL Router U ser Manual Fu l l - Allo ws other users on the network to read, modify , mov e, and delete any information in the select ed file or drive. Shar ing privileges can be r estricted by entering a passwor d in the “Full Acc ess P assword” text bo x.
69 App endix C Sharing Files and P rinters Depends on P assword - Allo ws both read-only and full acc ess on the shared file or driv e. The lev e l of access depends on the passwords ent ered in the “Read-Only P assword” and “Full A ccess P assword” t ext box es.
70 Ac tion tec Wireless Cable/DSL Router U ser Manual W indow s 2000 1. Af te r configuring the computer (including installing and c onfiguring the net- wo rk adapter), W indows 2000 automatically enables file and print sharing . The only item to be check ed is the computer and workgroup names.
71 App endix C Sharing Files and P rinters 4. In the “W or kgroup ” text box, enter the network name. This name must be the same on every computer on the network. Click OK . 5. The “N etwork Pr operties” window appears. Click OK , and r estart the compute r .
72 Ac tion tec Wireless Cable/DSL Router U ser Manual 5. To allow other users to acc ess the computer without giving out the owner name and owner password, select Us ers and Groups , then Ne w Us e r . 6. Wh en the “N ew U ser” window appears, enter the N ame and P asswor d of the user in their respectiv e text box es.
73 F inding the MA C A ddr ess This appendix explains how t o determine the MA C address of an Ethernet adapter installed on a comput er . Select the operating system and follow the instructions. W indow s 95, 98 1. Click Star t , then Ru n . 2. The “R un ” window appears.
74 Ac tion tec Wireless Cable/DSL Router U ser Manual W indow s 2000 1. Click Star t , Pro g r ams , A cc essories , Co mmand Prompt . 2. Wh en the “C ommand Pr ompt” window appears, enter: ipconfig /all then press Enter on the k e yboard. 3 A list of information about the Ethernet adapter appears.
75 Glossar y Acc ess Point A device that allows wireless clients to connect t o one another . An access point can also act as a bridge between wireless clients and a “w ired” network, suc h as an Ethernet network. Wir e less clients can be mov ed anywher e w ithin the cov er- age area of the access point and remain c onnected to the network.
76 Ac tion tec Wireless Cable/DSL Router U ser Manual Fir ew al l Pr ev ents users outside the netw ork from acc essing and/or damaging files or co mputers on the network. Gat ew ay A device that manages the data tr affic of a network, as well as data traffic to and from the Int ernet.
77 App endix E Glossary Subnet Mask A set of four numbers configur e d like an IP addr ess used to create IP address nu mbers used within a par ticular network only . T CP/IP ( T ransmission Contr ol Protocol/In ternet Protocol) The standard pr otocol for data transmission ov er the Internet.
78 Ac tion tec Wireless Cable/DSL Router U ser Manual.
79 Notic es Regulatory Complianc e Notices Class B Equipment This equipment has been tested and found t o comply with the limits for a Class B digital dev ice, pursuant to P ar t 15 of the FCC Rules. These limits are designed to provide reasonable pr otection against har mful interfer ence in a residential installa- tion.
80 Ac tion tec Wireless Cable/DSL Router U ser Manual 2. This device must accept an y interference rec eived, including interference that may cause un wanted operation.
81 Limited W arran ty Har d ware : Ac t ion te c Elect ronics, Inc., warrants to the end user (“C ustomer”) that this hardwar e product w ill be free fr om defects in workmanship and materials, under normal use and ser vice, for twelve (12) months fr om the date of purchase from Ac t ion te c Electronics or its authorized reseller .
82 Ac tion tec Wireless Cable/DSL Router U ser Manual THIS A CTION TEC ELECTRONICS PRODUCT MA Y INCL UDE OR BE BUNDLED WITH THIRD-P ARTY SOFTW ARE, THE USE OF WHICH IS GOVERNED BY A SEP A- RA TE END-USER LICENSE A GREEMENT . THIS A CTION TEC ELECTRONICS W ARRANTY DOES NOT APPL Y TO SUCH THIRD- PA R TY SOFTW ARE.
83 Limited W arranty NEITHER ASSUMES NOR A UTHORIZES ANY OTHER P ERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INST ALLA TION, MAIN- TEN ANCE OR USE OF ITS PRODUCT S.
84 Ac tion tec Wireless Cable/DSL Router U ser Manual Gov erning Law :T his Limited W arr anty shall be governed by the la ws of the State of California, U .S.A., ex cluding its conflicts of laws and principles, and ex cluding the U nited Nations C on vention on Co ntracts for the International Sale of Goods.
Ein wichtiger Punkt beim Kauf des Geräts Actiontec electronic GE344000-01 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Actiontec electronic GE344000-01 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Actiontec electronic GE344000-01 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Actiontec electronic GE344000-01 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Actiontec electronic GE344000-01 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Actiontec electronic GE344000-01 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Actiontec electronic GE344000-01 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Actiontec electronic GE344000-01. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Actiontec electronic GE344000-01 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
