Benutzeranleitung / Produktwartung D65 des Produzenten ACTi
Zur Seite of 33
Indoor Dome Series Hardware Manual D61 , D62 , D64, D65 , E61, E62, E63 , E64, E65, E66, E6 7 201 4/05/07.
w w w .a ct i. co m Hardware Manual 2 T able of Con tents Precautions ............................................................. 4 Safety Instructions .................................................................................... 6 Introduction .
w w w .a ct i. co m Hardware Manual 3 How to Remove the Memory Card ........................................................ 26 A cc essing the Camera ......................................... 27 Configure the IP Addresses ............................
w w w .a ct i. co m Hardware Manual 4 Precautions Read these instructio ns Y ou should read all the safet y and operating instructi ons before usin g this produc t. Heed all warnings Y ou must adhe re to all the warnings on the produc t and in the instruction manual.
w w w .a ct i. co m Hardware Manual 5 Federal Communic ations Commission Statement This equipment has been tested and foun d to compl y with the limits for a class B digital device, p ursuant to Part 15 of the FCC Rules. These lim its are designed to provide reasonable prote ction against harm ful interference in a r esidential installation.
w w w .a ct i. co m Hardware Manual 6 Safety Instructions Cleaning Disconnect this video prod uct from the power supply before c leaning. Attachments Do not use attachm ents not recommended by the video product manufacturer as they m ay cause hazards.
w w w .a ct i. co m Hardware Manual 7 Introduction The List of Models This hardware m anual contains the fol lowing models: D61 1 .3 MP Indoor Dome with SLLS, V ar i-f ocal lens D62 2MP Indoor Dom e w.
w w w .a ct i. co m Hardware Manual 8 Package Contents Camera (D64, D65, E61, E62, E63, E64, E65) Camera (D61, D62, E66, E 67) Mounting Screw Kit Hexagon Screwdriver Quick Installation Gui de War rant.
w w w .a ct i. co m Hardware Manual 9 Physical Descri ption D61, D62, E66, E67 D6 4 , D 65, E61, E62, E63, E64, E65 1) Reset Button The purpose of reset b utton is to restore the f actory def ault settings of the cam era, includin g the adm inistrator ’ s password.
w w w .a ct i. co m Hardware Manual 10 The reset button can be u sed for follow ing purposes: The adm inistrator ’ s password has be en forgotten and theref ore the cam era cannot be accessed. 1. In cas e of IP address, mask , or allow/deny filter relate d issues, resulting with inability to modify these settings.
w w w .a ct i. co m Hardware Manual 11 Mounting Options There are several m ounting options t hat you can use to install the cam era. Select t he most suitable solution for your installation environm ent. Mount T ypes Accessories Surface Mount Suitable w hen mountin g the camera directly o n walls or ceiling s without extra accessories.
w w w .a ct i. co m Hardware Manual 12 Mount T ypes Accessories Straight Wa ll Mount Suitable when mounting the camera on straight walls. PMAX-0308 (L-T ype Wall M ount) PMAX-0101 PMAX-0305 (Heavy Duty Wall Mount) V ertical Pole Mount Suitable when mounting the camera on vertical poles.
w w w .a ct i. co m Hardware Manual 13 Other Mounting Accessories Accessories PMAX-0104 (Extension T ube) NOTE: For more inf ormation about the m ounting solutions and accessories, please check the Mounting Accessory Selector in our website ( http://www .
w w w .a ct i. co m Hardware Manual 14 Installing the Camera on a Surface This section describes the procedures in installing the camera on a flat surf ace such as a h ard or dropped ceiling and stra ight or tilted walls. Before insta llation, make sure the wall or the ceil ing can bear m ore than the weight of th e camera.
w w w .a ct i. co m Hardware Manual 15 Step 2: Open the Dome Co ver NOTE: T o avoid scratches or leaving fingerpri nts on the dom e cover , it is recomm ended to retain the plastic covering the dom e cover until the c amera is com pletely installed. 1.
w w w .a ct i. co m Hardware Manual 16 4. If t he cables will be route d along the ceiling or w all , rem ove the cable ta b from the dom e cover . 5. If t he cables will pass th rough t he ceiling or wall, route and pull the cabl es through the hole on the surf ace.
w w w .a ct i. co m Hardware Manual 17 CAUTION: When u sing electric sc rewdrivers, be caref ul not to touch the cam era components while attaching the screws. Since electric screwdrivers vary in sizes, speed, and force, they m ay bruise and dam age the camera com ponents.
w w w .a ct i. co m Hardware Manual 18 Step 5 : A cce ss the Camera Li ve Vie w See Accessing the Cam era on page 27 for m ore inform ation on how to access th e Live View of the camera. Step 6: A dj ust the Vie w ing Angle and Focus Based on the cam era live view , adjust the vie wing angle, orientation a nd focus of the cam era.
w w w .a ct i. co m Hardware Manual 19 3. Tighten the three (3) scre ws to attach the dome c over to the cam era bod y. 4. Rem ove the plastic coverin g the dom e cover .
w w w .a ct i. co m Hardware Manual 20 Other Adjustments and Acce ssories How to A djust the Ca mera Viewing Angle and Focus This section describes procedures i n adjusting the vie wing angle, foc us, and pan direction of the camera.
w w w .a ct i. co m Hardware Manual 21 1. Loosen the tilt adjustm ent screws, a djust the tilt, and t hen tighten back the screws to f ix the tilt position. 2. Turn the rotation adjustm ent to rotate t he viewing orien tation. 3. Loosen the pan adjustm ent screw , move the pan dir ection, and then tigh ten back the screw to fix the pan pos ition.
w w w .a ct i. co m Hardware Manual 22 D64, D65, E61, E62, E63, E64, E65 Camera Models Camera Parts Overview Adjustment Procedur es 1. Loosen the tilt adjustm ent screws, a djust the tilt, and t hen tighten back the screws to f ix the tilt position. 2.
w w w .a ct i. co m Hardware Manual 23 How to Replace the Dome Co ver For more disc rete surveillance needs , the bundled do me c over can be replaced with a sm oke, vandal proof cover a vailable for purchase. T o rep lace the dom e cover , do th e following: 1.
w w w .a ct i. co m Hardware Manual 24 4. Rem ove the shroud f rom the dome cover . 5. Place the shroud on the re placement dom e cover . 6. Insert the replacem ent dome cover into the co ver h ousing. 7. Align and attach the thre e (3) sc rews to secure the bra cket to the cover ho using.
w w w .a ct i. co m Hardware Manual 25 8. Attach the dome c over to the cam era b y tightening the three (3) scr ews. Final installation should look sim ilar to the illustration be low .
w w w .a ct i. co m Hardware Manual 26 How to Use a Memory Card The camera s upports local video recor ding or saving of snapshots to a m emory card. NOTE: Supports m icroSDHC and m icroSDXC cards. How to Insert the Memory Card Insert a mem ory card into the card slot with the metal lic contacts facing do wn the camera.
w w w .a ct i. co m Hardware Manual 27 Accessing the Camera Configure the I P Addresses In order to b e ab le to com m unicate with the cam era from y our PC, both the cam era and the PC have to be within the same network segment.
w w w .a ct i. co m Hardware Manual 28 Double-click on the cam era model name, the default bro wser of the PC is automatically launched and the IP address of the target cam era is alread y filled in the address bar of the br owser .
w w w .a ct i. co m Hardware Manual 29 Use the default IP address of a c amera: If there is no DHCP server in the give n network, the us er m ay have to assign the IP addresses to both PC and cam era manuall y to make sure the y are in the sam e network s egment.
w w w .a ct i. co m Hardware Manual 30 Manually adjust the IP addresses of mu ltiple cam eras : If there are more than 1 cam era to be used in the same local area network and there is no DHCP server to assign u nique IP address es to e ach of them, all of th e cam eras would then have the initial IP address of 192.
w w w .a ct i. co m Hardware Manual 31 Access the Ca mera Now that the cam era and the PC are bot h having their unique IP addresses and are under the same network s egment, it is possible to use the Web browser of the PC to access the cam era.
w w w .a ct i. co m Hardware Manual 32 The following examples in this manual ar e b ased o n Int ernet Explorer brow ser in order to cover all functions of the camera.
w w w .a ct i. co m Hardware Manual 33 T o check the firm ware version through the W eb Configurator , access the Setup page and click System > S ystem Info .
Ein wichtiger Punkt beim Kauf des Geräts ACTi D65 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie ACTi D65 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für ACTi D65 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von ACTi D65 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über ACTi D65 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon ACTi D65 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von ACTi D65 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit ACTi D65. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei ACTi D65 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
