Benutzeranleitung / Produktwartung LB9213A des Produzenten Black Box
Zur Seite of 28
Max Express Ethernet Switch 17 Ports 10/100Base-TX/FX Base Unit: LB9217A-R2 Modules: LB9213A, LB9214A, LB9215A LB9216A, LB9218A, LB9219A LB9220C-ST, LB9220C-SC Order toll-free in the U.
Max Express Ethernet Switch LB9217A-R2 & Applicable Modules 2 FEDERAL COMMUNICATIONS COMMIS SION AND CANADIAN DEPARTMENT O F COMMUNICATIONS RADIO FREQUENCY INTERFE RENCE STATEMENT This equipment g.
Max Express Ethernet Switch LB9217A-R2 & Applicable Modules 3 8. Servicio—El usuar io no debe inte ntar dar servici o al equipo eléctrico más allá a lo descrito en las instrucci ones de operación. Tod o otro servicio deberá ser r eferido a personal de servicio calificado.
Max Express Ethernet Switch LB9217A-R2 & Applicable Modules 4 Preface This manual describes how to install and use the 17-Port modular Fast Ethernet Switch LB9217A. The switch introduced here is a base unit providing 3 expansion slots, including two slots for 8-port modules and one slot for single-port module.
Max Express Ethernet Switch LB9217A-R2 & Applicable Modules 5 Table of Contents PREFACE ...........................................................................................4 TABLE OF CONTENTS ................................................
Max Express Ethernet Switch LB9217A-R2 & Applicable Modules 6 Introduction LB9217A: 17-Port Modular Fast Ethernet Switch The 17-Port Switch is a modular switch consisting of three expansion slots: two for 8-port 10/100BaseTX/FX module , and one for 1-port 100BaseFX module.
Max Express Ethernet Switch LB9217A-R2 & Applicable Modules 7 Product Features ♦ Base unit wi th three expansion slots ♦ Auto-negotiation for speed and duplexity on TX ports ♦ True non-blocking architecture ♦ Full wire-speed forwarding rate ♦ Store-and-forward mechanism ♦ Back-pressure and IEEE 802.
Max Express Ethernet Switch LB9217A-R2 & Applicable Modules 8 Packing List When you unpack this product package, you will find the items listed below. Please insp ect the cont ents, and re port any apparent damage or missing items immediately to our authorized reseller.
Max Express Ethernet Switch LB9217A-R2 & Applicable Modules 9 Modules There are total 8 different modules available to choose that fit best with your network environment needs.
Max Express Ethernet Switch LB9217A-R2 & Applicable Modules 10 Module Installation There are two sets of different modules available for LB9217A-R2, the base unit for Max Express Ethernet Switch.
Max Express Ethernet Switch LB9217A-R2 & Applicable Modules 11 Step by Step Installation for Sing le Port Module: LB9220C-ST & LB9220C-SC 1. Remove the module from the st atic-free container. 2. Unscrew the cover plate(s) from base un it on position C.
Max Express Ethernet Switch LB9217A-R2 & Applicable Modules 12 o Reset q Port S tatus on S in g le-Port Module LEDs & Reset Button The array of LED indicators on the front panel conveys status and configuration information to help you m onitor and troubleshoot the switch.
Max Express Ethernet Switch LB9217A-R2 & Applicable Modules 13 q Port Status on Single- Port Module A set of three LEDs conveys the port status on the single-port module. Consult Table 2 for details. Table 2: Port status on single-port Module LED State Indication Steady A valid 100Mbps network connection established.
Max Express Ethernet Switch LB9217A-R2 & Applicable Modules 14 Switch Configuratio n This section explains the configuration of VLAN and t runking settings. Setting up Console Port Connection To configure your switch t hrough the console port, it i s necessary to first configure a terminal emulation program .
Max Express Ethernet Switch LB9217A-R2 & Applicable Modules 15 Main Menu This main menu shows you the default configuration of the switch. By default, all TX ports are set at auto-negotiation and flow control on, all FX ports are set at 100Mbps with full duplex and flow control off, and all ports are grouped into V1 (VLAN group 1).
Max Express Ethernet Switch LB9217A-R2 & Applicable Modules 16 Port Settings The duplex mode and speed can be altere d and the flow control can be turned on/off to accommodate special needs.
Max Express Ethernet Switch LB9217A-R2 & Applicable Modules 17 Port-based VLAN & Settings The 17-Port Switch allows up to sixteen port-based VLAN domains. Assign each port to a VLAN group or a couple of VL AN groups according to accessibility needs.
Max Express Ethernet Switch LB9217A-R2 & Applicable Modules 18 y Press [ENTER] to apply and save the setting, then all the other ports will be assigned to each different VLAN group and use the desired port as the routing (uplink) port For example, here we have the port 17 assigned as routing (uplink) port.
Max Express Ethernet Switch LB9217A-R2 & Applicable Modules 19 <NOTE> Can only choose port1 and port2 for 2-port trunking Follow these steps to configure the 4-port trunking.
Max Express Ethernet Switch LB9217A-R2 & Applicable Modules 20 Installation This chapter gives step-by-step installation instructions for the 17-Port Switch.
Max Express Ethernet Switch LB9217A-R2 & Applicable Modules 21 Connecting to Your Network Cabling y First, ensure the power of the switch and end devices is turned off. <NOTE> Always ensure that the power is off before any installation. y Prepare cable with corres ponding connectors for each type of port in use.
Max Express Ethernet Switch LB9217A-R2 & Applicable Modules 22 Technical Spec ifications 17-Port 10/100Base-TX/FX: LB9217A-R2 Applica ble Standards IEEE 802.
Max Express Ethernet Switch LB9217A-R2 & Applicable Modules 23 Physical S pecificat ions 9217A 17-Port Switch Dimensions 440 × 285 × 45 mm 19” Rackmo unt Size, 1U Weight 3.4kg (7.5lb) Power Input 100 ~ 240 Vac, 50~60 Hz Input Fuse 2A Power Consumption 52W Max.
Max Express Ethernet Switch LB9217A-R2 & Applicable Modules 24 Trouble-shooting Guide This tr ouble-shoot ing guide desc ribes pr oblems that could occu r with the Express Eth ernet Sw itch. The gu ide st ates p ossible re asons for the symptoms , and prop er steps to t ake to solv e the probl ems.
Max Express Ethernet Switch LB9217A-R2 & Applicable Modules 25 No Connectivity to the Data Terminal Equipment. Symptom: An Ethernet switch cannot communicate to the directly connected computers or network segments. Possible Pr oblem Solution Incorrect or faulty cabling 1.
Max Express Ethernet Switch LB9217A-R2 & Applicable Modules 26 No Connectivity to Certain Nodes on the Network Symptom: Data terminal equipment (DTE) conn ected to the switch can not send or receive information from certain segments on the same network or across to another LAN or WAN.
Max Express Ethernet Switch LB9217A-R2 & Applicable Modules 27 Trademarks Any trademarks are ac knowledged to be the property of the trade mark owners.
Max Express Ethernet Switch LB9217A-R2 & Applicable Modules 28 Glossary 10BASE-T Net working standard for twisted-pair cablin g capable of carrying data at 10 Mbps. 100BASE- TX Networking standard for two pairs of high-quality twisted-pair wires carrying data at 100 Mbps.
Ein wichtiger Punkt beim Kauf des Geräts Black Box LB9213A (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Black Box LB9213A noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Black Box LB9213A - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Black Box LB9213A reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Black Box LB9213A erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Black Box LB9213A besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Black Box LB9213A verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Black Box LB9213A. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Black Box LB9213A gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
