Benutzeranleitung / Produktwartung DVT312 des Produzenten Zenith
Zur Seite of 36
© Copyright 2003, Zenith Electronics Corporation Installation and Operating Guide | W arranty Model Number | DVT312 | DVD/CD Receiver (Speakers: LHS-D6230T/LHS-D6230W).
2 Safety Precautions This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
INTRODUCTION 3 1. Read these instructions. - All these safety and operating instructions should be read before the product is operated. 2. Keep these instructions. - The safety , operating and use instructions should be retained for future reference. 3.
4 T able of Contents Introduction Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . 2 Important Safety Instructions . . . . . . . . . . . . . . . . . 3 T able of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Before Use .
INTRODUCTION 5 Before Use Playable Discs DVD (8 cm / 12 cm disc) Audio CD (8 cm / 12 cm disc) In addition, this unit can play a DVD-RW , DVD+RW , Kodak PICTURE CD and CD-R or CD-RW that contain audio titles, MP3 or JPEG files.
6 Before Use (Continued) Precautions Handling the unit When shipping the unit The original shipping carton and packing materials may come in handy . For maximum protection, re-pack the unit as it was originally packed at the factory . When setting up the unit The picture and sound of a nearby TV , VCR, or radio may be disturbed during playback.
INTRODUCTION 7 Front Panel Controls/ Display Window Indicators Indicates current player function: Playback, Pause, etc. ANGLE available indicator DVD: DVD inserted MP3: MP3 disc inserted Indicates cur.
8 Remote Control Buttons Remote Control Operation Range Point the remote control at the remote sensor and press the buttons. Distance: About 23 ft (7 m) from the front of the remote sensor .
INTRODUCTION 9 Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit. Rear Panel Connections RR L L 300 S-VIDEO OUT Connector FM 30.
10 Connections FM Wire Antenna (supplied) AM Loop Antanna (supplied) RR L L 300 Antenna Connections Connect the supplied FM/AM antennas for listening to the radio. Connect the AM loop aerial to the AM antenna connectors. Connect he FM wire aerial to the FM antenna connectors.
SYSTEM SETUP 11 Connections (Continued) RR L L 300 S-VIDEO INPUT L R AUDIO INPUT L VIDEO INPUT TV Connections Panel S V Make one of the following connections, depending on the capabilities of your existing equipment.
12 Connections (Continued) External Equipment Connections RR L L 300 VCR Connections Panel (or LD* player , etc) L R AUDIO OUTPUT VIDEO OUTPUT Connections Connect the AUX IN (L/R) jacks on the DVD/CD receiver to the AUDIO OUT (L/R) jacks on the VCR, LD player , etc.
SYSTEM SETUP 13 Connections (Continued) Front Speaker (Right) Front Speaker (Left) Center Speaker Rear Speaker (Right Surround) Subwoofer Rear Speaker (Left Surround) RR L L 300 Speaker System Connection Connect the speakers using the supplied speaker cords.
14 Connections Center Speaker Front Speaker (Left) Speaker Positioning Example Rear Speaker (Left) Rear Speaker (Right) Front Speaker (Right) Subwoofer Speaker Positioning For a normal set up use 6 speakers (2 front speakers, center speaker , 2 rear speakers and subwoofer).
SYSTEM SETUP 15 Before Operation Mini Glossary for Audio Stream & Surround mode Allows you to enjoy 5.1(or 6) discrete channels of high quality digital audio from DTS program sources such as discs, DVD and compact discs, etc. bearing the trademark.
16 Before Operation (Continued) General Explanation This manual gives basic instructions for operating the DVD/CD receiver . Some DVDs require specific opera- tion or allow only limited operation during playback.
SYSTEM SETUP 17 Before Operation (Continued) Initial Settings Y ou can set your own Personal Preferences on the DVD/CD receiver . Initial Settings General Operation 1 1 Press SETUP . The Setup menu appears. 2 2 Use 3 3 / 4 4 to select the menu option.
18 Before Operation (Continued) Speaker Setup 5.1 Speaker settings Select speaker settings, including volume balance and delay time, or test the speaker settings. Speaker settings are only active on the Analog Multi- Channel Output. (See “ Speaker Setup ” , page 27.
SYSTEM SETUP 19 Before Operation (Continued) Parental Control Rating Movies on DVDs may contain scenes not suitable for children. Therefore, discs may contain Parental Control information that applies to the complete disc or to certain scenes on the disc.
20 DVD Operation Playing a DVD Playback Setup T urn on the TV and select the video input source con- nected to the DVD/CD receiver . Audio system: T urn on the audio system and select the input source connected to the DVD/CD receiver . 1 1 Press OPEN/CLOSE to open the disc tray .
OPERA TION 21 DVD Operation General Features (continued) Still Picture and Frame-by-Frame Playback 1 Press P AUSE/STEP during playback. The DVD/CD receiver will go into P AUSE mode. 2 Y ou can advance the picture frame-by-frame by pressing P AUSE/STEP repeatedly on the remote control.
22 DVD Operation General Features (continued) Zoom The Zoom function allows you to enlarge the video image and to move through the enlarged image. 1 Press ZOOM during playback or still playback to activate the Zoom function. If you press ZOOM repeatedly , the magnification level increases up to six steps.
OPERA TION 23 Audio and MP3 Disc Operation Playing an Audio CD or MP3 Disc The DVD/CD receiver can play MP3 formatted record- ings on CD-ROM, CD-R or CD-RW discs. Before playing MP3 recordings, read the notes on MP3 Recordings on right. 1 1 Insert a disc and close the tray .
24 Audio and MP3 Disc Operation (Continued) Pause 1 Press P AUSE/STEP during playback. 2 T o return to playback, press PLA Y , P AUSE/STEP or ENTER again. Moving to Another T rack Press SKIP/SCAN . or > briefly during playback to return to the beginning of the current track or to go to the next track.
OPERA TION 25 Viewing a JPEG disc This DVD/CD receiver can play discs with JPEG files and Kodak picture CD. Before playing JPEG recordings, read the notes on JPEG Recordings on right. 1 1 Insert a disc and close the tray . The MP3-JPEG choice menu appears on the TV screen.
26 Programmed Playback MP3 CD Programmed Playback with Audio CD or MP3 Disc The Program function enables you to store your favorite tracks from any disc in the player memory . Program can contain 30 tracks. 1 1 Press PROGRAM during playback or in the stop mode to enter the Program Edit mode.
OPERA TION 27 Speaker Setup Adjust the following settings for the built-in 5.1 channel surround decoder . 1 1 Select “ 5.1 Speaker Setup ” using the 3 3 / 4 4 buttons on the Setup menu. 2 2 While “ 5.1 Speaker Setup ” is selected, press 2 button.
28 Radio Operation Presetting radio stations Y ou can preset 30 stations for FM and AM. Before tun- ing, make sure that you have turned down the volume. 1 1 Press BAND on the remote control until FM or AM appears in the display window . 2 2 With each press of BAND, FM and AM changes alternately .
OPERA TION 29 Radio Operation (Continued) Sleep Timer Setup Y ou can set the DVD/CD receiver to turn off automati- cally at a specified time. 1 1 Press SLEEP to set the desired sleep time. The SLEEP indicator and sleep time appears in the dis- play window .
30 Language Code List Enter the appropriate code number for the initial settings “ Disc Audio ” , “ Disc Subtitle ” and/or “ Disc Menu ” (See page 17).
REFERENCE 31 Code Country AD Andorra AE United Arab Emirates AF Afghanistan AG Antigua and Barbuda AI Anguilla AL Albania AM Armenia AN Netherlands Antilles AO Angola AQ Antarctica AR Argentina AS Ame.
32 T roubleshooting Check the following guide for the possible cause of a problem before contacting service. Symptom No power . The power is on, but the DVD/CD receiver does not work. No picture. There is no sound or only a very low-level sound is heard.
REFERENCE 33 T roubleshooting (Cont ’ d) Symptom Radio stations cannot be tuned in. The remote control does not work properly . Cause • The antenna is positioned or connected poorly . • The signal strength of the stations is too weak (when tuning in with automatic tuning).
34 Specifications [General] [CD/DVD] [Video] [Amplifier] [Speakers] [Supplied Accessories] Power supply Refer to back label Power consumption Refer to back label Weight 12.
Notes.
ZENITH ELECTRONICS CORPORA TION Zenith Part No. 206-3873 2000 MILLBROOK DRIVE GS# 3828R -D031Q LINCOLNSHIRE, IL 60069 Printed in China Issue O Zenith will repair or replace your product, at Zenith’ .
Ein wichtiger Punkt beim Kauf des Geräts Zenith DVT312 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Zenith DVT312 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Zenith DVT312 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Zenith DVT312 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Zenith DVT312 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Zenith DVT312 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Zenith DVT312 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Zenith DVT312. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Zenith DVT312 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
