Benutzeranleitung / Produktwartung Z-6170 (U) des Produzenten Zebex
Zur Seite of 28
.
Revision History Changes to the original m anual are listed below: V ersion Date Description of V ersion 1.0 Aug. 17, 2009 Initial release 1.1 May 03, 2010 Add DOF 1.
Import ant Notice No warranty of any kind is made i n regard to this material, includin g, but not limited to, implied warranties of mercha ntability or fitness for a particular purpos e. We are not liable for any errors contained her ein or incidental or cons equential dama ges in connection with furnishing, performance or use of this material.
Laser Safety The laser scanner complies with safety standar d IEC 60825-1 for a Class I laser produce. It also complies with CDRH as ap plicable to a Class IIa l aser product.
T able of Content s Introducti on.................................................................................................................. 1 Unpackin g ..........................................................................................
1 1. Introduction Elegant and functional, the newly-designed Han ds-Free Single-Laser Omnidirectional Barco de Scanner leads t he trend to the next aesthetical level. Its distinctive white colo r fits perfectly into places like bookstore, boutique and anywhere delica cy is a must.
2. Unp acking The hands-free omnidirect ional scanner p ackage cont ains: 1 ea. Single line omnidirectional sca nner 1 ea. Communication ca ble 1 ea. Power adapter (only for specific RS-232 cables as optional accessory) 1 ea. User ’s manual & programmin g guide in CD-ROM 1 ea.
3. Outline Figure 1: Outline Description Function Scan Window Read barcodes S peaker Exit For beep tone indication Hinge Shaft Allow adjustment of device body forwards or backwards LED Indicator Readi.
4. Inst alling the Device 4.1 Using Suction Cup The device is designed with a cupulate st and, and easily sucks to any smooth surface without making any damage. It is most sugge sted to place on glass surface for best and firmest suction result, or use the transp arent self adhesive mylar provided in pa ckage if your counter top is not 100% smooth.
4.2 Using Mounting Screw The device is reserved with 3 mounting hol es for permanent fixture if required. Refer to the figure below for det ailed information.
5. Adjusting Scan Angle The device has a hinge shaft that allows tilt forwa rds and backwards in cert ain angle. Gently holds the device with one hand and move the scan an gle as needed. Figure 5: Scan angle Do not let the scan beam facing dire ctly to human eyes.
6. Connection 6.1 Interface Cable The interface cable comes with dif fer ent host-end connectors, and there are 3 standard types of interface connection that this device support s: (a) Keyboard wedge .
6.2 Connecting to the Host Follow the steps belo w to connect the interface cable to the host. 1. Make sure the power of the host sy stem is of f. 2. Connect the host-end of the interface cable to the appro priate connector on the host system.
6.4 V erifying Scanner Operation Please follow the procedure below to verify scanning operation. 1. Insert the modular plug of the Inte rface cable into the back of the scanner until a firm click is heard. 2. If necessary , plug the power adapter in to the jack on the interface cable.
10 7 Setting Up the Scanner In certain cases no setup is required. T he scan ner is either pre-programmed to suit the situation, or it automatically detect s and is ready to go. In other cases the scanner must be informed a bout what kind of system it is connected to.
8 How to Scan in Different Mode The device is an omnidirectional present at ion scanner with a 5 directional scan field with a 20 lines scan pattern. The scan volume extends approximately 20cm (8”) in front of the scan window . Barcod e labels can be ea sily read when presented towards the scanning window .
8.2 Single Line Scan Mode In this mode the scanner can emit a si ngle line patt ern for users to handheld scanning of hard-to-rea d or multiple ba rcodes on one obje ct. Sales clerks can switch it to single line scan opt ion simply by pressing one button.
9 Sleep Mode After the scanner has be en inactive for a period of time, the laser and the mot or would automatically turn of f and the sc anner would enter the sleep mode. The blue LED would blink as indicatio n. It takes 2 step s to enter the sleep mode.
14 10 LED Indications There are red and blue d ual color LED indications on the head of the device. They indicate the operational st atus of the scanner . The following are the LED statuses and their indications. LED St atus Indication Off No power supplied to the scann er .
15 11 Sound Indications The device uses a speaker to give audi ble feedback on scanner o peration. The following are the sound indi cations. Beep s Indication One beep A barcode has been succe ssfully decoded. Four be eps in series This indicates the scanner p assed the power on self-test and is operating properly .
12 Controlling the Scanner from the POS Sy stem The scanner can be controlled from the POS system via the RS-232C interface. Controlling can be accomplished by tr ansmitting the following single byte commands to the sca nner .
17 13 T rouble Shooting This section cont ains information about how to solve probl ems that you may encounter when operating the scanner . Ho wever , before referring to the tip s, make sure that the scanner is in stalle d as instructed in this manua l and that all cables are properly con nected.
14 Maint aining the Scanner 14.1 Cleaning the Scan Window The scanner is designed fo r long-term tr ouble-free operation and rarely require s any maintenance. Only an occasional cleani ng of the scanner win dow is necessary in order to remove dirt and fingerp rints.
15 Dimension Unit: mm ( inch ) 19.
16 Reading Field 16.1 Depth of Field 16.2 W id t h of Field 20.
21 17 S pecification Operational Light Source 650nm visible laser diodes (VLD) Depth of Scan Field 0 - 200 mm (UPC/EAN 100%, PCS=90%) Scan Pattern 5 directions of scan field Scan Rate 1400 scans per s.
18 Connector and Pin Out 18.1 Device PIN-OUT CONFIGURA TION FUNCTION PIN Keyboard RS-232C USB 1 USB Power 2 +5V 3 KB_CLK D- 4 PC_CLK RTS_TTL 5 GND 6 TXD_TTL 7 RXD_TTL 8 KB_DA T A D+ 9 PC_DA T A CTS_TTL 10 18.2 Interface Cable Keyboard Wedge Cable (for PS/2) PIN-OUT CONFIGUR A TION MINI DIN (M) MINI DIN(F) DIN FUNCTION DIN FUNCTION 1.
RS-232C Cable – DCE pin ou t PIN-OUT CONFIGURA TION DB-9 (F) FUNCTION 2 RX 3 TX 7 RTS 8 CTS 5 GND 9 +5V USB Cable –USB T ype A Connector Function 1.
Ein wichtiger Punkt beim Kauf des Geräts Zebex Z-6170 (U) (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Zebex Z-6170 (U) noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Zebex Z-6170 (U) - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Zebex Z-6170 (U) reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Zebex Z-6170 (U) erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Zebex Z-6170 (U) besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Zebex Z-6170 (U) verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Zebex Z-6170 (U). Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Zebex Z-6170 (U) gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
