Benutzeranleitung / Produktwartung 7404V des Produzenten Billion Electric Company
Zur Seite of 151
BiP AC 7404V Series V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router User ’ s Manual V ersion Release 5.51.rc3 Last Revision Date: 08-15-2006.
T T a a b b l l e e o o f f C C o o n n t t e e n n t t s s CHAPTER 1: INTRODUCTION ............................................................................................................. 4 INTRODUCTION TO YOUR ROUTER ...........................
DHCP Server .................................................................................................................................. 39 W AN - W ide Ar ea Network ..............................................................................
PROBLEMS WITH THE LAN INTERF ACE ..................................................................................... 149 APPENDIX A: PRODUCT SUPPOR T AND CONT ACT INFORMA TION .
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 1: Introduction Chapter 1: Introduction Introduction to your Router Welcome to the V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router .
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 1: Introduction directly for auto detection. Multi-Protocol to Est ablish a Connection It supports PPPoA (RFC 2364 - PPP over A TM Adaptation Laye.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 1: Introduction network, Internet. Rich Packet Filtering Not only filters the packe t based on IP address, but also based on Port numbers. It will filter p ackets from and to the Internet, and also provides a higher level of security control.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 2: Installing the router Chapter 2: Inst alling the Router Import ant note for using this router Wa r n i n g Do not use this router in high humidity or high temperatures. Do not use the same power source for this router as othe r equipment.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 2: Installing the router The Front LEDs LED Meaning 1 PWR Lit when power is ON. 2 SYS Lit when the system is ready . 3 – 6 LAN Port 1X — 4X (RJ-45 connector) Lit when connected to an Ethernet device.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 2: Installing the router The Rear Port s 1 3 5 6 2 4 8 7 The Ethernet Port # 4 can be used as a console port. Y ou need a special console tool which already includes in the p ackage to connect w ith LAN port 4 and PC’ s RS-232 port (9-pin serial port).
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 2: Installing the router 7 ADSL Connect the supplied RJ-1 1 (“telephone”) cable to this port when connecting to the ADSL/telephone network. 8 Antenna (Wireless Router only) Connect the detachable antenna to this port.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 3: Basic Installation 11 Chapter 3: Basic Inst allation The router can be configured with your web browser . A web browser is included as a st andard application in the following operating systems: Linux, Mac OS, Windows 98/NT/2000/X P/Me, etc.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 3: Basic Installation 12 Connecting Y our Router 1. Connect this router to a LAN (Local Area Network) and the ADSL/telephone ( ADSL ) network. 2. Power on the device. 3. Make sure the PWR and SYS LEDs are lit steadily and that the LAN LED is lit.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 3: Basic Installation 13 Configuring PCs in Windows in Window XP 1. Go to St art / Control Panel (in Classic V iew). In the Control Panel, double-click Network Connections . 2. Double-click Local Area Connection .
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 3: Basic Installation 14 Configuring PCs in Windows 2000 1. Go to St art / Settings / Control Panel . In the Control Panel, double-click Network and Dial-up Connections . 2. Double-click Local Area (“LAN”) Connection .
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 3: Basic Installation 15 Configuring PC in Windows 95/98/ME 1. Go to St art / Settings / Control Panel . In the Control Panel, double-click Network and choose the Configuration tab. 2. Select TCP / IP -> NE2000 Compatible , or the name of any Network Interface Card (NIC) in your PC.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 3: Basic Installation 16 Configuring PC in Windows NT4.0 1. Go to St art / Settings / Control Panel . In the Control Panel, double-click Network and choose the Protocols tab. 2. Select TCP/IP Protocol and click Properties .
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 3: Basic Installation 17 Factory Default Settings Before configuring your , you need to know the following default settings. Web Interface (Username and Password) Username: admin Password: admin The default username and password are “ admin ” and “ admin ” respectively .
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 3: Basic Inst allation 18 Information from your ISP Before configuring this device, you have to check wi th your ISP (Internet Service Provider) to find out what kind of service is provided such as DHCP (Obt ain an IP Address Automatically , S tatic IP (Fixed IP Address) and PPPoE.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 3: Basic Installation 19 Configuring with your W eb Browser Open your web browser , enter the IP address of your router , which by default is 192.168.1.254 , and click “ Go ”, a user name and password window prompt will appear .
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Chapter 4: Configuration At the configuration homepage, the lef t navigation pane where bookmarks are provided links you directly.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration S t atus ARP T able This section displays the router’s ARP (Address Resolution Protocol) T able, which shows the mapping of Internet (IP) addresses to Ethernet (MAC) addresses.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Destination: The IP address of the destination network. Netmask: The destination Netmask address. Gateway/Interface: The IP address of the gateway or existing interface that this route will use.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Name: The name you assigned to the Permanent configuration. IP Address: The fixed IP address for the specify client. MAC Address: The MAC Address that you want to assign the fixed IP address.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration L2TP St atus (Only the 7404VGO has VPN features) This shows details of your configured L2TP VPN Connections. Name: The name you assigned to the p articular L2TP connection in your VPN configuration.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration V oIP Call Log This page displays the det ailed log of each call. The maximum number of record is 30 entries for each phone port. (Dialed Calls List: 10, Received Calls List: 10, Missed Calls List: 10).
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Error Log Any errors encountered by the router (e.g. invalid names given to entries) are logged to this window . NA T Sessions This section lists all current NA T sessions between interface of types external (W AN) and internal (LAN).
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration UPnP Portmap The section lists all por t-mapping established u sing UPnP (Universal Plug and Play . See Advanced section of this manual for more details on UPnP and the router ’s UPnP configuration options.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Quick S t art For detailed instructions on configuring your W AN settings, please see the WA N section of this manual.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Select the desired option from the list and click Apply to return to the Quick S tart interface to continue configuring your ISP connection. Please note that the content s of this list will vary , depending on what is supported by your ISP .
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Configuration When you click this item, you get following sub-items to configure the ADSL router . - LAN, W an, System, Firewall, VPN, V oIP , QoS, V irtual Server , Time Schedule and Advanced These functions are described below in the following sections.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Ethernet Primary IP Address IP Address: The default IP on this router . Subnet Mask: The default subnet mask on this router . RIP: RIP v1, RIP v2, and RIP v2 Multicast. Check to enable RIP function.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Ethernet Client Filter The Ethernet Client Filter supports up to 16 Ethernet network machines that help s you to manage your network control to accept traf fic from specific authorized machines or can restrict unwa nted machine(s) to access your LAN.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Active PC in LAN displays a list of individual Ethernet device’s IP Address & MAC Address which connecting to the router . Y ou can easily by checking the box next to the IP address to be blocked or allowed.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration America (N.America), Europe, France, etc. The Channel ID will be dif ferent based on this setting. Channel ID: Select the wireless connection ID channel that you would like to use.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Wireless Security (W ireless Router only) Y ou can disable or enable with WP A or WEP for protecting wireless network.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration WEP WEP Encryption: T o prevent unauthorized wireless station s from accessing data transmitted over the network, the router offers highly secure dat a encryption, known as WEP .
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Wireless Client / MAC Address Filter (Wireless Router only) The MAC Address support s up to 16 wireless network machines and helps you to manage your network control to accept traffic fr om specific authorized mach ines or to restrict unwanted machine(s) to access your LAN.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Port Setting This section allows you to configure the settings for the r outer ’s Ethernet ports t o solve some of the compatibility problems that may be encountered while connecting to the I nternet, as well allowing users to tweak the performance of their network.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration DHCP Server Y ou can disable or enable the DHCP (Dynamic Host C onfiguration Protocol) server or enable the router ’s DHCP relay functions.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration W AN - Wide Area Network W AN refers to your Wi de Area Network connection, i.e. your router ’s connection to your ISP and the Internet. Here are the items within the W AN section: ISP , DNS and ADSL .
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration RFC 1483 Routed Connections Description: User-definable name for the connection. VPI and VCI: Enter the information provided by your ISP . A TM Class: The Quality of Service for A TM layer .
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration RFC 1483 Bridged Connections Description: User-definable name for the connection. VPI and VCI: Enter the information provided by your ISP . A TM Class: The Quality of Service for A TM layer .
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration PPPoA Routed Connections Description: User-definable name for the connection. VPI/VCI: Enter the information provided by your ISP . A TM Class: The Quality of Service for A TM layer .
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Internet). Idle Timeout: Auto-disconnect the broadband firewall gateway when there is no activity on the line for a predetermined period of time. Det ail: Y ou can define the destination port and p acket type (TCP/UDP) without checking by timer .
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration IPoA Routed Connections Description: User-definable name for the connection. VPI/VCI: Enter the information provided by your ISP . A TM Class: The Quality of Service for A TM layer .
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration PPPoE Connections Description: User-definable name for this connection. VPI/VCI: Enter the information provided by your ISP .
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Internet). Idle Timeout: Auto-disconnect the broadband firewall gateway when there is no activity on the line for a predetermined period of time. Det ail: Y ou can define the destination port and p acket type (TCP/UDP) without checking by timer .
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration PPPoE with Pass-through Connections PPPoE with pass-through adapt s the following method: PPPoE Routed mode + 1483 Bridge Mode. With pure PPPoE connection, the router can get one W AN address to the router .
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration automatically re-establish the PPPoE session when disconnected by the ISP . Connect on Dema nd: If you want to est ablish a PPPoE session only when there is a packet requesting access to the Internet (i.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration DNS A Domain Name System (DNS) contains a mapping t able for domain name and IP addresses. On the Internet, every host has a unique and user-friendly name (domain name) such as www .
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration ADSL Connect Mode: This mode will automatically detect your AD SL line code, ADSL2+, ADSL2, G .dmt, G .lite, T1.413, AnnexM2 and AnnexM2+. But in some area, multimode cannot detect the ADSL line code well.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Advanced Options ADSL Parameters help to interpret your ADSL line statistics. SNR Margin: It is known as Signal to Noise Ration Margin. It is the relative of DSL strength to Noise ratio.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration System Here are the items within the System section: Time Zone, Remote Access, Firmware Upgrade, Backup/Restore, Rest art and User Management.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Remote Access T o temporarily permit remote administration of the rout er (i.e. from outside your LAN), select a time period the router will permit remote access for and click Enable.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Firmware Upgrade Y our router ’s “firmware” is the sof tware that allows it to operate and provides all its functionality . Think of your router as a dedicated computer , and the firmware as the software it runs.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Backup / Restore These functions allow you to save and backup your router ’s current settings to a f ile on your PC, or to restore a previously saved backup.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Rest art Router Click Resta rt with option Current Settings to reboot your router (and restore your last saved configuration).
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration User Management In order to prevent unauthorized access to your router ’s configuration interface, it requires all users to login with a password. Y ou can set up multiple user accounts, each with their own password.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Firewall and Access Control Y our router includes a full SPI (S tateful Packet Inspection) f irewall for controlling Internet access from your LAN, as well as helping to prevent att acks from hackers.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration General Settings Y ou can choose not to enable Firewall and still able to a ccess to URL Filter and IM/P2P Blocking or enable the Firewall using preset filter rules and modify the port filter rule s as required.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Packet Filter This function is only available when the Firewall is enabled and one of th ese four security levels is chosen (All blocked, High, Medium and Low). The preset port filter rules in the Packet Filter must modify accordingly to the level of Firewall, which is selected.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Example: Predefined Port Filters Rules The predefined port filter rules for High, Medium and Low security levels are listed. See T able 1. Note: Firewall – All Blocked/User-defined, you must define and create the p ort f ilter rules yourself.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 63 MSN (7001) UDP(17) 7001 7001 YES YES N/A N/A N/A N/A MSN VEDIO (9000) TCP(6) 9000 9000 NO YES N/A N/A N/A N/A Inbound: Internet to LAN ; Outbound: LAN to Internet.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Packet Filter – Add Raw IP Filter Rule Name: Users-define description to iden tify this entry or click to select existing predefined rules. Time Schedule: It is self-defined time period.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Example: Configuring your firewall to allow for a publicly accessible web server on your LAN The predefined port filter rule for HTTP (TCP port 80) is the same no matter whether the firewall is set to a high, medium or low security level.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Configuring Packet Filter: 1. Click Port Filters . Y ou will then be presented with the predefined port filter rules screen (in this case for the low security level), shown below: Note: You may click Edit the predefine d rule instead of Dele te it.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 5. The new port filter rule for HTTP is shown below: 6. Configure your Virtual Server (“port forwarding”) settings so that in.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Intrusion Detection The router ’s Intrusion Detection System (IDS) is used to detect hacker att acks and intrusion attempts from the Internet.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration T able 2: Hacker att ack types recognized by the IDS Intrusion Name Detect Parameter Blacklist T ype of Block Duration Drop Packe.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration URL Filter URL (Uniform Resource Locator – e.g. an address in the form of http://www .abcde.com or http://www .example.com ) filter rules allow you to prevent users on your network from accessing p articular websites by their URL.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration dropped. 3. If the p acket does not match either of the above two items, it is sent to the remote web server . 4. Please be n ote that the completed URL, “www” + domain name shall be specified.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration IM / P2P Blocking IM, short for Instant Message, is required to use client program sof tware that allows users to communicate, in exchanging text message, with other IM users in real time over the Internet.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Firewall Log Firewall Log display log information of any unexpected action with your firewall settings. Check the Enable box to activate the logs. Log information can be seen in the St atus – Event Log after enabling.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration VPN - V irtual Private Networks (BiP AC 7404VGO Only) Virtual Private Networks is ways to e stablish secured communication tunnels to an organization’ s network via the Internet.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration PPTP Connection - Remote Access Connection Name: User-defined name for the connection (e.g. “connection to office”). T ype: Check Dial Out if you want your router to operate as a client (connecting to a remote VPN server , e.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Example: Configuring a Remote Access PPTP VPN Dial-out Connection A company’ s office establishes a PPTP VPN connection with a file server located at a separate location. The router is installed in the of fice, connected to a couple of PCs and Servers.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Configuring the PPTP VPN in the Office Y ou can either input the IP address (69.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration PPTP Connection - LAN to LAN Connection Name: User-define description of the connection. T ype: Check Dial Out if you want your router to operate as a client (connecting to a remote VPN server , e.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Example: Configuring a PPTP LAN-to-LAN VPN Connection The branch office est ablishes a PPTP VPN tunnel with head office to connect two private networks over the Internet. The routers are inst alled in the head office and branch office accordingly .
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Configuring PPTP VPN in the Head Office The IP address 192.168.1.201 will be assigned to the router located in the branch of fice. Please make sure this IP is not used in the head of fice LAN.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Configuring PPTP VPN in the Branch Office The IP address 69.1.12 1.30 is the Public IP address of the router located in head office.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration IPSec (IP Security Protocol) Click Create to create a new IPSec VPN connection account. After you have created the IPSec connection, account information will be displayed. (See example above).
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration IPSec VPN Connection Connection Name: User-defined name for the connection (e.g. “connection to office”). Local Network: Set the IP address, subnet or address range of the local network.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 3DES: S tands for T riple Data Encryption S tandard, it uses 168 (56*3) bit s as an encryption method. AES: S tands for Advanced Encryption S tandards, you can use 128, 192 or 256 bit s as encryption method.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Advanced Option This function is only available after completed creating an IPSec account. Click Advanced Option to change the following settings: IKE (Internet key Exchange) Mode: Select IKE mode to Main mode or Aggressive mode.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration AES: S tands for Advanced Encryption S tandards, you can use 128, 192 or 256 bits as encryption method. Diffie-Hellman Group: It is a public-key cryptography protocol that allows two parties to esta blish a shared secret over an unsecured communication channel (i.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Example: Configuring a IPSec LAN-to-LAN VPN Connection T able 3: Network Configuration and Security Plan Branch Office Head Office Local Network ID 192.168.0.0/24 192.168.1.0/24 Local Router IP 69.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Configuring IPSec VPN in the Head Office 1 2 3 4 5 Item Function Description 1 Connection Name IPSec_HeadOffice Given a name of IPSec connection Subnet Check Subnet radio button IP Address 192.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Configuring IPSec VPN in the Branch Office 1 2 3 4 5 Item Function Description 1 Connection Name IPSec_Branch Office Given a name of IPSec connection Subnet Check Subnet radio button IP Address 192.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Example: Configuring a IPSec Host-to-LAN VPN Connection 90.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Configuring IPSec VPN in the Office 1 2 Item Function Description 1 Connection Name IPSec Given a name of IPSec connection Subnet Check Subnet radio button IP Address 192.168.1.0 2 Netmask 255.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration L2TP (Lay er T wo T unneling Protocol) T wo types of L2TP VPN are supported Remote Access and LAN-to-LAN (please refer below fo r more information.). Click Create to create a new VPN connection account.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration L2TP Connection - Remote Access L2TP VPN Connection Connection Name: User-defined name for the connection (e.g. “connection to office”). T ype: Check Dial Out if you want your router to operate as a client (connecting to a remote VPN server , e.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration the VPN tunnel to the Internet; therefore, active the function may degrade the Internet performance. Click Apply af ter changing settings. L2TP over IPSec (L2TP/IPSec) VPN Connection IPSec: Enable for enhancing your L2TP VPN security .
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Example: Configuring a L2TP VPN - Remote Access Dial-in Connection A remote worker establishes a L2TP VPN connection with the head office using Microsoft's VPN Adapter (included with Windows XP/2000/ME, etc.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Configuring L2TP VPN in the Office The input IP address 192.168.1.200 will be assigned to the remote worker .
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Example: Configuring a Remote Access L2TP VPN Dial-out Connection A company’ s office establishes a L2TP VPN connection with a file server located at a sep arate location. The router is installed in the of fice, connected to a couple of PCs and Servers.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Configuring the L2TP VPN in the Office 1 2 3 5 4 6 Item Function Description 1 Connection Name VPN_L2TP Given name of L2TP connection Dial out Check Dial out 2 Server IP Address (or Hostname) 69.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Example: Configuring your Router to Dial-in to the Server Currently , Microsoft Windows operation system does not support L2TP incoming service. Additional software may be required to set up your L2TP incoming service.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration PPP Authentication T ype: Default is Auto if you want the router to determine the authentication type to use, or else manually sp.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Example: Configuring L2TP LAN-to-LAN VPN Connection The branch office est ablishes a L2TP VPN tunnel with head office to connect two private networks over the Internet. The routers are inst alled in the head office and branch office accordingly .
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Configuring L2TP VPN in the Head Office The IP addr ess 192.168.1.200 will be assigned t o the router located in the branch o ffice. Please make sure this IP is not used in the head of fice LAN.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Configuring L2TP VPN in the Branch Office The IP address 69.1.12 1.30 is the Public IP address of the router located in head office.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration V oIP - V oice over Internet Protocol V oIP enables telephone calls through existing Internet connection instead of goin g through the PSTN (Public Switched T elephone Network).
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Wiza rd This section provides easy setup for your V oIP service. Phone port 1 and 2 can be registered to different SIP Service Provider . V oice QoS DSCP Marking : Differe ntiated Services Code Point (DSCP), it is the first 6 bit s in the T oS byte.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Setting for Phone Port 2 Click box of Same as Phone Port 1 to set phone port 2 be identical as phone port 1. Please refer to descriptions in “Setting for Phone Port 1”. User-defined Profiles Note: User defined profiles are limited to 8 only.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Authentication Password: This parameter holds the p assword used for authentication within V oIP SIP registrar . Confirm Password: Re-enter the password for confirmation. Display Name: This p arameter will be appeared on the Caller ID.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration you talk. Default is set to Enable. RTP Port: Provide the based value from the media (RTP) ports that ar e assigned for various end points and the different call sessions that may exist within an end-point.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Advanced – Parameters V oIP through IP Interface: IP Interface decides where to send/receive the voip traf fic; it includes: ipwan and iplan. Easy way to select the interface is to check the location of t he SIP serv er .
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration OFFHOOK voltage to the lowest setting registered for all your telephones, e.g. if your telephones return values of 4, 5 and 7 then you should set your OFFHOOK voltage to 4.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Authentication Username: Same as Phone Number . Authentication Password: This parameter holds the p assword used for authentication within V oIP SIP registrar . Confirm Password: Re-enter the password for confirmation.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration PSTN Dial Plan (Router with LINE port only) This section enables you to configure “V oIP with PSTN switching” on your system. Y ou can define a range of dial plans to make regular call from V oIP switching t o PSTN line.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration PSTN Dial Plan Examples: 1) Dial with Prefix If you dial 01223 707070, number 01223707070 will be dialed out via FXO to make a regular phone call. 2) Dial without Prefix If you dial 9102, the number 102 will only be dialed out via FXO port to make a regular phone call.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 4) Dial at Timeout no Prefix If you only dial 97070 and no more numbers, after the timeout activates, 7070 will be dialed without prefix to make a regular call via FXO port.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration V oIP Dial Plan This section helps you to make a telephony number dialed as making a regular call via V oIP . Y ou no longer need to memorize a long dial string of number for making a V oIP call.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Appendix A: Product Support and Contact Information Note: Refer to Special Dial Code section in this Manual for more details. T est: It is a tool to help to identify the call number is being properly being processed prior to making a n actual call.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Appendix A: Product Support and Contact Information # (pound sign): It is normal character ‘#’ on phone key pad. Please check if it is pr ovided by your V oIP Service Provider or Local T elephone Serv ice Provider for special service(s).
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Appendix A: Product Support and Contact Information Localcheap.com is the default V oIP provider I set on phone port 1. When I call out any number start with 1 or 2 or 3 and plus rest of the phone number for local call, 03 is alw ays prepended in front of these number .
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Appendix A: Product Support and Contact Information Mobilecheap.com is the default V oIP provider I set on phon e port 2. When I call out 123-39-45678 for a mobile call, 123 is replaced with 09. Therefore, 09-39-45678 is the actual phone n umber called out via Mobilecheap.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Special Dial Codes The following table list s the special dial codes that are built-in to the system: Option Description Flash-hook (Wireless Router with LINE port only) Switch to PSTN line Note: A quick press of the hook.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration QoS - Quality of Service QoS function helps you to control your network traf fic for each application from LAN (Ethernet and/or Wireless) to W AN (Internet).
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Source IP Address Range : The source IP address or range of packets to be monitored. Destination IP address Range : The destination IP address or range of packet s to be monitored.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Outbound IP Throttling (LAN to W AN) IP Throttling allows you to limit the speed of IP traffic. T he value entered will limit the speed of the application that you set to the specified value’s multiple of 32kbp s.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Inbound IP Throttling (W AN to LAN) IP Throttling allows you to limit the speed of IP traffic. T he value entered will limit the speed of the application that you set to the specified value’s multiple of 32kbp s.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Example: QoS for your Network Connection Diagram Normal PCs Vo I P Restricted PC Information and Settings Upstream: 928 kbp s Downstream: 8 Mbps V oIP User : 192.168.1.1 Normal Users : 192.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Mission-critical application Mostly the VPN connection is mission-critical application for doing data exchange between head and branch office. The mission-critical application must be sent out smoothly without any dropping.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Sometime your customers or friends may upload their f iles to your FTP server and that will saturate your downstream bandwidth. The settings below help you to limit bandwidth for the restricted application.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration V irtual Server (known as Port Forw arding) In TCP/IP and UDP networks a port is a 16-bit number used to identify which application program (usually a server) incoming connections should be delivered to.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Add Virtual Server Because NA T can act as a “natural” Internet firewall, your router protect s your network from being acces.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Example: If you like to remote accessing your Router through the W eb/HTTP at all time, you would need to enable port number 80 (Web/H TTP) and map to Router ’s IP Address.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Edit DMZ Host The DMZ Host is a local computer exposed to the Internet. When setting a p articular internal IP address as the DMZ.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Edit One-to-One NA T (Network Address T ranslation) One-to-One NA T map s a specific private/local IP address to a global/public IP address. If you have multiple public/W AN IP addresses fro m you ISP , you are eligible for One-to-One NA T to utilize these IP addresses.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Time Schedule: User-defined time period to enable your virtual server . Y ou ma y specify a time schedule or Always on for the usage of this V irtual Server Entry .
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Example: List of some well-known and registered port numbers. The Internet Assigned Numbers Authority (IANA) is the central coordinat or for the assignment of unique parameter values for Int ernet protocols.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Time Schedule The T ime Schedule supports up to 16 time slot s which helps you to manage your Internet connection. In each time profile, you may schedule specific day(s) i.e. Monday through Sunday to restrict or allowing the usage of the Internet by users or applications.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Configuration of Time Schedule Edit a Time Slot 1. Choose any Time Slot (ID 1 to ID 16) to edit, click Edit. Click Edit Note: Watch it carefully, the days you have selected will presen t in capital letter.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Advanced Configuration options within the Advanced section are for users who wish to take a dvantage of the more advanced features of the router . Users who do not understand the features should not attempt to reconfigure their router , unless advised to do so by support staf f.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Dynamic DNS The Dynamic DNS function allows you to alias a dynamic IP address to a static hostname, allowing users whose ISP does not assign them a st atic IP address to use a domain name.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Check Email This function allows you to have the router check your POP3 mailbox for new Email messages. The Mail LED on your router will light when it detects new messages waiting for download.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Device Management The Device Management advanced configuration settings allow you to control your router ’s security options and device monitoring features.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration address 192.168.1.55 to logon to the W eb GUI by typing: http:// 192.168.1.254:100 in their web browser.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Address T ranslation group IP group ICMP group TCP group UDP group EGP (not applicable) T ransmission.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration IGMP IGMP , known as Internet Group Management Protocol , is used to management host s from multicast group. IGMP Forwarding: Accepting multicast p acket. Default is set to Enable.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Ethernet1: P2, P3 and P4 (Port 2, 3, 4) Please uncheck P2, P3, P4 from Ethernet VLAN Port first. Note: You should setup each VLAN group with caution. Each Bridge Interface is arranged in this order.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration S paces next to VPI and VCI, type 0 and 33 in respectively . Select appropriate A TM Cl ass, Encapsulation Method, Acceptable Frame T ype, Filter T ype and PVID for Unt agged Frames.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Step 3: Setup VLAN Service Go to Configuration Advanced VLAN Bridge DefaultVlan lists all member port s. It is necessary to group specific member ports for each VLAN. From the example, two VLAN groups are requested: Dat a and Video.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Mapping the VLAN Bridge with Bridge Interface created in S tep1, you will see the conformable relationship in these two screenshots. Step 4: IGMP Snooping Enable Go Configuration Advanced IGMP .
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration Logout T o exit the router ’s web interface, choose Logout . Please e nsure that you have saved the configuration settings before you logout. Be aware that the router is restricted to only one PC accessing the configuration we b pages at a time.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Appendix A: Product Support and Contact Information Chapter 5: T roubleshooting If the router is not functioning properly , first check this chapter for simple troubleshooting before contacting your service provider or Billion support.
V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router Appendix A: Product Support and Contact Information APPENDIX A: Product Support and Cont act Information Most problems can be solved by referring to the T roubleshooting section in the User ’s Manual .
Ein wichtiger Punkt beim Kauf des Geräts Billion Electric Company 7404V (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Billion Electric Company 7404V noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Billion Electric Company 7404V - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Billion Electric Company 7404V reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Billion Electric Company 7404V erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Billion Electric Company 7404V besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Billion Electric Company 7404V verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Billion Electric Company 7404V. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Billion Electric Company 7404V gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
