Benutzeranleitung / Produktwartung 18 des Produzenten Z Microsystems
Zur Seite of 29
Doc# 27-0004UM Issued 10/00 Rev 1.2 04/02/02 Z Microsystems User Manu al OR I O N 18 FIELD-READY.
Doc# 27-0004UM Issued 10/00 Rev 1.2 04/02/02 1. Use the power and video cables supplied with the Orion to help prevent interference with radio and television reception. The use of cables and adapters may cause interference with electronic equipment in the vicinity of this unit.
Doc# 27-0004UM Issued 10/00 Rev 1.2 04/02/02 ST ARTING POINT 4 Shipment Contents 4 User Manual 4 System Requirements 4 Product Description 5 T ools Required 6 Precautions 6 INST ALL ORION 7 Remove Pro.
Doc# 27-0004UM Issued 10/00 Rev 1.2 04/02/02 The User Manual is also available on the Z Microsystems website (www .zmicro.com). W e recommend you read this manual as follows: Carefully follow the instructions in the Installation chapter for hookup and initial control settings.
Doc# 27-0004UM Issued 10/00 Rev 1.2 04/02/02 PRODUCT DESCRIPTION 5 Star ting P oint Each Orion 18 features safety glass, front control panel, and low power usage that extends the life of the monitor as well as emanation protection that make it less susceptible to electro- magnetic interference.
Doc# 27-0004UM Issued 10/00 Rev 1.2 04/02/02 TOOLS REQUIRED PRECA UTIONS Required T ools and Equipment for Mechanical Installation #2 Phillips screwdriver In preparation to install the Orion, take the following precautionary steps: T urn off the electrical power to your computer .
Doc# 27-0004UM Issued 10/00 Rev 1.2 04/02/02 Install Orion The following drawing shows the Orion 18 from the back, side, top and front. 7 DRA WING.
Doc# 27-0004UM Issued 10/00 Rev 1.2 04/02/02 The Orion 18 mounts directly to the rails of a standard 19 RETMA rack. 8 Install Orion Bottom: One picture-in-picture (PIP) RCA connector , One RCA connector for future use, and One 15-pin RGB VGA connector .
Doc# 27-0004UM Issued 10/00 Rev 1.2 04/02/02 Install Orion 9 REMOVE PROTECTIVE LENS The Orion 18 comes with an optional protective lens on front of the screen, which is used during shipping or long storage. T o remove the protective lens, slide the release catch on the top of the screen up.
Doc# 27-0004UM Issued 10/00 Rev 1.2 04/02/02 Install Orion CONNECTING CABLES NOTE: Connecting to nonstandard systems will require an adapter . T o obtain a video adapter , contact Customer Services at Z Microsystems, Inc.
Doc# 27-0004UM Issued 10/00 Rev 1.2 04/02/02 Monitor CONTROLS The Orion features push-button controls on the lower front of the display screen to adjust the brightness of the display , to change the image positioning on the screen, and to refine the screen image.
Doc# 27-0004UM Issued 10/00 Rev 1.2 04/02/02 12 The three LED lights on the right of the control panel are labeled A , B and C. Their lighted functions are: A -- Unused B --- Picture-in-Picture (PIP) .
Doc# 27-0004UM Issued 10/00 Rev 1.2 04/02/02 Monitor 13 ON- SCREEN MENU ACCESSING THE MENU SYSTEM Using the display controls: If the display is blank, press the Menu button on the Display Controls. The Main Menu will be displayed. T o change the highlighted line on the Main Menu, push the Down or Up button on the Display Controls.
Doc# 27-0004UM Issued 10/00 Rev 1.2 04/02/02 14 Monitor MENU ADJUSTMENT MAIN SCREEN Brightness Push the Right button to increase the brightness and the Left button to reduce the brightness. Contrast Push the Right button to increase contrast and the Left button to reduce the contrast.
Doc# 27-0004UM Issued 10/00 Rev 1.2 04/02/02 15 Monitor MENU ADJUSTMENT VIDEO PIP (PIP OPTION) PIP Enable Press L eft, Right or Menu buttons to turn ON/OFF the PIP window . PIP Size PIP can be adjusted to any size. PIP Horz. & V ert. P osition moves the PIP window on the display .
Doc# 27-0004UM Issued 10/00 Rev 1.2 04/02/02 Maintenance MAINTENANCE OF FLA T P ANEL DISPLA Y Unplug the monitor from the power outlet before cleaning. T o clean the flat panel display screen, lightly dampen a soft, clean cloth with water or mild detergent.
Doc# 27-0004UM Issued 10/00 Rev 1.2 04/02/02 17 T r oubleshooting NO IMAGE ON DISPLA Y What is the color of the Standby LED? Black -- No power or in Standby mode: Make sure the power cable is plugged in. Connect the power cable to a 110 V outlet, which is turned ON .
Doc# 27-0004UM Issued 10/00 Rev 1.2 04/02/02 T r oubleshooting NO IMAGE ON PIP WINDOW (PIP OPTION) T o activate PIP window , refer to page 11 or 15. What is the color of the PIP LED (the B LED)? Black -- PIP function is OFF or there is no video signal.
Doc# 27-0004UM Issued 10/00 Rev 1.2 04/02/02 19 Specifica tions SIZE Display Image Size Pixel Configuration Video Input Separate Sync Composite Sync Sync on Green Horizontal Sync V ertical Sync Horizontal Frequency V ertical Frequency Pixel Frequency Color P alette Contrast Ratio Pixel Pitch Luminance Diagonal Dim.
Doc# 27-0004UM Issued 10/00 Rev 1.2 04/02/02 20 Specifica tions SIZE Display Image Size Pixel Configuration Video Input Separate Sync Composite Sync Sync on Green Horizontal Sync V ertical Sync Horizontal Frequency V ertical Frequency Pixel Frequency Color P alette Contrast Ratio Pixel Pitch Luminance Diagonal Dim.
Doc# 27-0004UM Issued 10/00 Rev 1.2 04/02/02 21 Specifica tions SIZE Display Image Size Pixel Configuration Video Input Separate Sync Composite Sync Sync on Green Horizontal Sync V ertical Sync Horizontal Frequency V ertical Frequency Pixel Frequency Color P alette Contrast Ratio Pixel Pitch Luminance Diagonal Dim.
Doc# 27-0004UM Issued 10/00 Rev 1.2 04/02/02 Specifica tions 22 CABLING Display Cable P ower Cable TO T AL P ACK AGING SIZE Size WEIGHT T otal Assembled W eight ENVIRONMENT AL Operating T emp.
Doc# 27-0004UM Issued 10/00 Rev 1.2 04/02/02 23 1 YEAR ST ANDARD WARRANTY Extent of Limited W arranty 1. Z Microsystems, Inc. (Z Micro) warrants to the end-user that Z Micro products will be free from defects in materials and workmanship for a specified time after the date of purchase.
Doc# 27-0004UM Issued 10/00 Rev 1.2 04/02/02 such limitations; Grant the customer additional warranty rights, specify the duration of implied warranties which the manufacturer cannot disclaim, or not allow limitations on how long an implied warranty lasts.
Doc# 27-0004UM Issued 10/00 Rev 1.2 04/02/02 25 W ar r anty How long does it take? Are there any extra costs? What about classified data? Y our equipment should be returned to you within 30 days of its receipt at the factory . In many cases it will be less (our goal is to have your equipment on its way back within 5 days).
Doc# 27-0004UM Issued 10/00 Rev 1.2 04/02/02 NOTE: If possible, stay by the computer . The Z Microsystems T echnical Support Representa- tive may wish to go through the problem over the telephone. NOTE: More help, late-breaking news and details of the latest accessories for these products may be found on the worldwide web at: http:// www.
Doc# 27-0004UM Issued 10/00 Rev 1.2 04/02/02 If the Z Microsystems T echnical Support Engineer determines that the product needs to be replaced, a Customer Service Representative will issue a Return Material Authorization (RMA) number and return address.
Doc# 27-0004UM Issued 10/00 Rev 1.2 04/02/02 Z Microsystems, Inc. 5945 P acific Center Blvd., Suite 509 San Diego, CA 92121 Phone: (858) 657-1000 Fax: (858) 657-1001 W ebsite: http://www .
Doc# 27-0004UM Issued 10/00 Rev 1.2 04/02/02 Apollo Z M icrosystems The Leader In R ugged Displays www .zmicro.com/products/displays.htm Command Console Quantico StarGate Glider Gemini Eclipse 17.
Ein wichtiger Punkt beim Kauf des Geräts Z Microsystems 18 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Z Microsystems 18 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Z Microsystems 18 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Z Microsystems 18 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Z Microsystems 18 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Z Microsystems 18 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Z Microsystems 18 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Z Microsystems 18. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Z Microsystems 18 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
