Benutzeranleitung / Produktwartung PW80 (2009) des Produzenten Yamaha
Zur Seite of 72
3RV-28199-8K PW80(Z) OWNER’S MANUAL MANUEL DU PROPRIÉTAIRE BEDIENUNGSANLEITUNG Read this manual carefully before operating this vehicle. Il convient de lire attentivement ce manuel avant la pre- mière utilisation du véhicule. Bitte lesen Sie diese Bedienungsanleitung sorgfältig durch, bevor Sie das Fahrzeug in Betrieb nehmen.
Y AMAHA MO T OR CO. , L TD . PRINTED IN JAPAN 2009.04–0.2 × 1 ! (E, F, G) PRINTED ON RECYCLED PAPER AUF RECYCLINGPAPIER GEDRUCKT IMPRIMÉ SUR PAPIER RECYCLÉ Y AMAHA MO T OR CO.
3RV-28199-8K-E0 PW80(Z) OWNER’S MANUAL Read this manual carefully before operating this vehicle..
EAU48180 Read this manual carefully before operating this vehicle. This manual should stay with this vehicle if it is sold. EC Declaration of Conformity conforming to Directive 98/ 37/ EC, 2006/42/EC We, Y AMAHA MOT OR CO .
INTRODUCTION EAU41582 Congratulations on your purchase of the Yamaha PW80(Z). This model is the result of Yamaha’s vast experience in the pro- duction of fine sporting, touring, and pacesetting racing machines. It represents the high degree of craftsmanship and reli- ability that have made Yamaha a leader in these fields.
INTRODUCTION AN IMPORTANT NOTE TO PARENTS: This motorcycle is not a toy. Before you let your child ride this motorcycle, you should understand the instructions and warn- ings in this Owner’s Manual. Then be sure your child understands and will follow them.
IMPORTANT MANUAL INFORMATION EAU10132 Particularly important information is distinguished in this manual by the following notations: This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follo w this symbol to av oid possib le injury or death.
IMPORTANT MANUAL INFORMATION EAU10200 PW80(Z) O WNER’S MANU AL ©2009 by Y amaha Motor Co., Ltd. 1st edition, Mar ch 2009 All rights reserved. Any reprinting or unauthorized use without the written permission of Y amaha Motor Co., Ltd. is expressl y prohibited.
TABLE OF CONTENTS LOCATION OF IMPORTANT LABELS ............................................. 1-1 SAFETY INFORMATION .................. 2-1 DESCRIPTION .................................. 3-1 Left view .......................................... 3-1 Right view .
TABLE OF CONTENTS SPECIFICATIONS ............................. 9-1 CONSUMER INFORMATION ........... 10-1 Identification numbers .................. 10-1.
1-1 1 2 3 4 5 6 7 8 9 LOCATION OF IMPORTANT LABELS EAU48130 Read and understand all of the labels on your vehicle. They contain important information for safe and proper operation of your vehicle. Never remove any labels from your vehicle. If a label becomes difficult to read or comes off, a replacement label is available from your Yamaha dealer.
LOCATION OF IMPORTANT LABELS 1-2 1 2 3 4 5 6 7 8 9 For Europe 4 5PG-2817L-10 100 1.00 15 100 1.00 15 5PG-2816R-00 1 2 3.
LOCATION OF IMPORTANT LABELS 1-3 1 2 3 4 5 6 7 8 9 Familiarize yourself with the following pictograms and read the explanatory text. **.* kP a *.** kgf/cm² *.* psi **.* kP a *.** kgf/cm² *.* psi Read the Owner’ s man ual. This unit contains high-pressure nitrogen gas.
LOCATION OF IMPORTANT LABELS 1-4 1 2 3 4 5 6 7 8 9 For Oceania and South Africa 1 3 2.
LOCATION OF IMPORTANT LABELS 1-5 1 2 3 4 5 6 7 8 9 For Oceania and South Africa Before y ou operate this v ehicle, read the owner ’ s manual. 5P A-21568-01 Prima di usare il veicolo , leggete il manuale di istruzioni. Lire le manuel du propri é taire av ant d ’ utiliser ce v é hicule.
2-1 1 2 3 4 5 6 7 8 9 SAFETY INFORMATION EAU41214 Be a Responsible Owner As the vehicle’s owner, you are respon- sible for the safe and proper operation of your motorcycle. Motorcycles are single-track vehicles. Their safe use and operation are de- pendent upon the use of proper riding techniques as well as the expertise of the operator.
2-2 2 3 4 5 6 7 8 9 SAFETY INFORMATION erator is veering wide on a turn due to excessive speed or under- cornering (insufficient lean angle for the speed). Never travel faster than warranted by conditions. ● Ride cautiously in unfamiliar ar- eas. You may encounter hidden obstacles that could cause an ac- cident.
2-3 1 2 3 4 5 6 7 8 9 SAFETY INFORMATION dling if the weight distribution of the mo- torcycle is changed. To avoid the possibility of an accident, use extreme caution when adding accessories to your motorcycle. Use extra care when riding a motorcycle that has added ac- cessories.
2-4 2 3 4 5 6 7 8 9 SAFETY INFORMATION bar or the front fork area can create instability due to improper weight distribution. If accesso- ries are added to the handlebar or front fork area, they must be as lightweight as possible and should be kept to a minimum.
3-1 1 2 3 4 5 6 7 8 9 DESCRIPTION EAU10410 Left view 1 23 4 5 6 7 1. Air filter element (page 7-8) 2. Fuel cock (page 4-5) 3. Throttle stop screw (page 7-10) 4. Star ter (choke) le v er (page 4-6) 5. 2-stroke engine oil tank (page 4-4) 6. Sidestand (page 4-8) 7.
DESCRIPTION 3-2 2 3 4 5 6 7 8 9 EAU10420 Right view 6 12 3 4 5 1. Spark arrester (page 7-9) 2. Seat (page 4-7) 3. T ransmission oil filler cap (page 7-7) 4.
DESCRIPTION 3-3 1 2 3 4 5 6 7 8 9 EAU10430 Controls and instruments 12 43 1. Handlebar switch (page 4-1) 2. Brake le v er (page 4-2) 3. Throttle grip (page 7-11) 4.
4-1 2 3 4 5 6 7 8 9 INSTRUMENT AND CONTROL FUNCTIONS EAU40660 Handlebar switch EAU41130 Engine stop switch “ ENGINE STOP ” Set this switch to “RUN” before starting the engine. Set this switch to “OFF” to stop the engine. EAU41590 Power reduction plate Your motorcycle was delivered with a power reduction plate.
INSTRUMENT AND CONTROL FUNCTIONS 4-2 1 2 3 4 5 6 7 8 9 EAU12890 Brake lever The brake lever is located at the right handlebar grip. To apply the front brake, pull the lever toward the handle- bar grip. EAU12941 Brake pedal The brake pedal is on the right side of the motorcycle.
INSTRUMENT AND CONTROL FUNCTIONS 4-3 2 3 4 5 6 7 8 9 EAU13221 Fuel Make sure there is sufficient gasoline in the tank. W ARNING EWA10881 Gasoline and gasoline vapors are extremely flammable. To avoid fires and explosions and to reduce the risk of injury when refueling, follow these instructions.
INSTRUMENT AND CONTROL FUNCTIONS 4-4 1 2 3 4 5 6 7 8 9 curs, use a gasoline of a different brand or premium unleaded fuel. Use of un- leaded fuel will extend spark plug life and reduce maintenance costs. EAU13412 Fuel tank breather hose Before operating the motorcycle: ● Check the fuel tank breather hose connection.
INSTRUMENT AND CONTROL FUNCTIONS 4-5 2 3 4 5 6 7 8 9 tank cap and add the recommend- ed oil. 3. Install the 2-stroke engine oil tank cap. NO TICE ECA16670 Make sure that the 2-stroke engine oil tank cap is properly installed.
INSTRUMENT AND CONTROL FUNCTIONS 4-6 1 2 3 4 5 6 7 8 9 This indicates reserve. If you run out of fuel while riding, move the lever to this position. Fill the tank at the first oppor- tunity.
INSTRUMENT AND CONTROL FUNCTIONS 4-7 2 3 4 5 6 7 8 9 EAU41140 Seat To remove the seat Remove the nuts, and then pull the seat off. To install the seat 1. Insert the projection on the front of the seat into the seat holder as shown. 2. Place the seat in the original posi- tion, and then tighten the nuts.
INSTRUMENT AND CONTROL FUNCTIONS 4-8 1 2 3 4 5 6 7 8 9 EAU37490 Sidestand The sidestand is located on the left side of the frame. Raise the sidestand or lower it with your foot while holding the vehicle upright.
5-1 2 3 4 5 6 7 8 9 FOR YOUR SAFETY – PRE-OPERATION CHECKS EAU15596 Inspect your vehicle each time you use it to make sure the vehicle is in safe operating condition. Always follow the inspection and maintenance procedures and schedules described in the Owner ’ s Manual.
FOR YOUR SAFETY – PRE-OPERATION CHECKS 5-2 1 2 3 4 5 6 7 8 9 Drive chain ● Check chain slac k. ● Adjust if necessary . ● Check chain condition. ● Lubricate if necessar y . 7-16, 7-17 Wheels and tires ● Check f or damage. ● Check tire condition and tread depth.
6-1 2 3 4 5 6 7 8 9 OPERATION AND IMPORTANT RIDING POINTS EAU15951 Read the Owner ’ s Manual carefully to become familiar with all controls. If there is a control or function you do not understand, ask your Yamaha dealer.
OPERATION AND IMPORTANT RIDING POINTS 6-2 1 2 3 4 5 6 7 8 9 EAU16660 Starting a warm engine Follow the same procedure as for start- ing a cold engine with the exception that the starter (choke) is not required when the engine is warm. Instead, start the engine with the throttle slightly open.
OPERATION AND IMPORTANT RIDING POINTS 6-3 2 3 4 5 6 7 8 9 3. Open the throttle gradually. 4. Once the motorcycle has reached a speed high enough to change gears, close the throttle. 5. Shift into second gear and release the shift pedal. 6. Open the throttle gradually.
OPERATION AND IMPORTANT RIDING POINTS 6-4 1 2 3 4 5 6 7 8 9 EAU17191 Parking When parking, stop the engine, and then turn the fuel cock lever to “ OFF ” . W ARNING EWA10311 ● Since the engine and exhaust system can become very hot, park in a place where pedestri- ans or children are not likely to touch them and be burned.
7-1 2 3 4 5 6 7 8 9 PERIODIC MAINTENANCE AND ADJUSTMENT EAU41951 Periodic inspection, adjustment, and lu- brication will keep your vehicle in the safest and most efficient condition pos- sible.
PERIODIC MAINTENANCE AND ADJUSTMENT 7-2 1 2 3 4 5 6 7 8 9 EAU41765 Periodic maintenance and lubrication chart TIP ● From 160 hours, repeat the maintenance intervals starting from 40 hours. ● Items marked with an asterisk should be performed by a Yamaha dealer as they require special tools, data and technical skills.
PERIODIC MAINTENANCE AND ADJUSTMENT 7-3 2 3 4 5 6 7 8 9 8* Tires Check tread depth and f or damage. Replace if necessary . Check air pressure . Correct if necessary . 9* Wheel bearings Check bearings f or smooth operation. Replace if necessary . 10 * Steering bearings Check bearing assemblies f or looseness.
PERIODIC MAINTENANCE AND ADJUSTMENT 7-4 1 2 3 4 5 6 7 8 9 TIP The air filter needs more frequent service if you are riding in unusually wet or dusty areas. 17 * Autolube pump Check operation. Correct if necessary . 18 T ransmission oil Check for oil leakage .
PERIODIC MAINTENANCE AND ADJUSTMENT 7-5 2 3 4 5 6 7 8 9 EAU19603 Checking the spark plug The spark plug is an important engine component, which is easy to check. Since heat and deposits will cause any spark plug to slowly erode, the spark plug should be removed and checked in accordance with the periodic mainte- nance and lubrication chart.
PERIODIC MAINTENANCE AND ADJUSTMENT 7-6 1 2 3 4 5 6 7 8 9 spark plug threads. 3. Install the spark plug with the spark plug wrench, and then tight- en it to the specified torque. TIP If a torque wrench is not available when installing a spark plug, a good estimate of the correct torque is 1/4 – 1/2 turn past finger tight.
PERIODIC MAINTENANCE AND ADJUSTMENT 7-7 2 3 4 5 6 7 8 9 EAU19943 Transmission oil The transmission oil level should be checked before each ride. In addition, the transmission oil must be changed at the intervals specified in the periodic maintenance and lubrication chart.
PERIODIC MAINTENANCE AND ADJUSTMENT 7-8 1 2 3 4 5 6 7 8 9 NO TICE ECA10452 ● In order to prevent clutch slip- page (since the transmission oil also lubricates the clutch), do not mix any chemical additives. Do not use oils with a diesel specification of “ CD ” or oils of a higher quality than specified.
PERIODIC MAINTENANCE AND ADJUSTMENT 7-9 2 3 4 5 6 7 8 9 4. Apply oil of the recommended type to the entire surface of the sponge material, and then squeeze the ex- cess oil out. TIP The sponge material should be wet but not dripping. 5. Install the sponge material onto the air filter case cover.
PERIODIC MAINTENANCE AND ADJUSTMENT 7-10 1 2 3 4 5 6 7 8 9 carbon deposits from the spark ar- rester portion of the tailpipe and in- side of the tailpipe housing. 3. Insert the tailpipe into the muffler, and then install and tighten the bolt to the specified torque.
PERIODIC MAINTENANCE AND ADJUSTMENT 7-11 2 3 4 5 6 7 8 9 TIP If the specified idling speed cannot be obtained as described above, have a Yamaha dealer make the adjustment. EAU21370 Adjusting the throttle cable free play The throttle cable free play should mea- sure 3.
PERIODIC MAINTENANCE AND ADJUSTMENT 7-12 1 2 3 4 5 6 7 8 9 EAU39821 Tires To maximize the performance, durabil- ity, and safe operation of your motorcy- cle, note the following points regarding the specified tires. Tire air pressure The tire air pressure should be checked and, if necessary, adjusted before each ride.
PERIODIC MAINTENANCE AND ADJUSTMENT 7-13 2 3 4 5 6 7 8 9 sively worn tires decreases riding stability and can lead to loss of control. ● The replacement of all wheel-and brake-related parts, including the tires, should be left to a Yamaha dealer, who has the necessary professional knowledge and experience.
PERIODIC MAINTENANCE AND ADJUSTMENT 7-14 1 2 3 4 5 6 7 8 9 3. If the specified brake lever free play could be obtained as de- scribed above, tighten the locknut and skip the rest of the procedure, otherwise proceed as follows. 4. Fully turn the adjusting bolt at the brake lever in direction (a) to loos- en the brake cable.
PERIODIC MAINTENANCE AND ADJUSTMENT 7-15 2 3 4 5 6 7 8 9 W ARNING EWA10680 ● After adjusting the drive chain slack or removing and installing the rear wheel, always check the brake pedal free play. ● If proper adjustment cannot be obtained as described, have a Yamaha dealer make this ad- justment.
PERIODIC MAINTENANCE AND ADJUSTMENT 7-16 1 2 3 4 5 6 7 8 9 EAU22760 Drive chain slack The drive chain slack should be checked before each ride and adjusted if necessary. EAU22773 To check the drive chain slack 1. Place the motorcycle on the side- stand.
PERIODIC MAINTENANCE AND ADJUSTMENT 7-17 2 3 4 5 6 7 8 9 in the specified limits. [ECA10571] TIP Using the alignment marks on each side of the swingarm, make sure that both adjusting nuts are in the same po- sition for proper wheel alignment. 3. Tighten both locknuts and the axle nut to the specified torques.
PERIODIC MAINTENANCE AND ADJUSTMENT 7-18 1 2 3 4 5 6 7 8 9 EAU41842 Checking and lubricating the cables The operation of all control cables and the condition of the cables should be checked before each ride, and the ca- bles and cable ends should be lubricat- ed if necessary.
PERIODIC MAINTENANCE AND ADJUSTMENT 7-19 2 3 4 5 6 7 8 9 EAU43622 Checking and lubricating the brake lever The operation of the brake lever should be checked before each ride, and the lever pivot should be lubricated if nec- essary.
PERIODIC MAINTENANCE AND ADJUSTMENT 7-20 1 2 3 4 5 6 7 8 9 EAU23272 Checking the front fork The condition and operation of the front fork must be checked as follows at the intervals specified in the periodic main- tenance and lubrication chart. To check the condition Check the inner tubes for scratches, damage and excessive oil leakage.
PERIODIC MAINTENANCE AND ADJUSTMENT 7-21 2 3 4 5 6 7 8 9 EAU23290 Checking the wheel bearings The front and rear wheel bearings must be checked at the intervals specified in the periodic maintenance and lubrica- tion chart. If there is play in the wheel hub or if the wheel does not turn smoothly, have a Yamaha dealer check the wheel bearings.
PERIODIC MAINTENANCE AND ADJUSTMENT 7-22 1 2 3 4 5 6 7 8 9 frame in front of the rear wheel or under each side of the swingarm. EAU24360 Front wheel EAU41532 To remove the front wheel W ARNING EWA10821 To avoid injury, securely support the vehicle so there is no danger of it falling over.
PERIODIC MAINTENANCE AND ADJUSTMENT 7-23 2 3 4 5 6 7 8 9 4. Disconnect the brake cable from the front brake lever. 5. Disconnect the brake cable from the brake camshaft lever. 6. Remove the brake cable free play adjusting bolt and the brake cable locknut at the front wheel hub.
PERIODIC MAINTENANCE AND ADJUSTMENT 7-24 1 2 3 4 5 6 7 8 9 3. Insert the wheel axle, and then in- stall the washer and axle nut. 4. Lower the front wheel so that it is on the ground. 5. Connect the brake cable at the wheel hub. 6. Connect the brake cable at the front brake lever.
PERIODIC MAINTENANCE AND ADJUSTMENT 7-25 2 3 4 5 6 7 8 9 the brake rod from the brake cam- shaft lever. 3. Disconnect the brake torque rod from the brake shoe plate by re- moving the cotter pin, the nut, and the bolt. 4. Loosen the locknut and drive chain adjusting nut on each end of the swingarm.
PERIODIC MAINTENANCE AND ADJUSTMENT 7-26 1 2 3 4 5 6 7 8 9 8. Tighten the axle nut to the speci- fied torque. 9. Adjust the brake pedal free play. (See page 7-14.) EAU25851 Troubleshooting Although Yamaha motorcycles receive a thorough inspection before shipment from the factory, trouble may occur dur- ing operation.
PERIODIC MAINTENANCE AND ADJUSTMENT 7-27 2 3 4 5 6 7 8 9 EAU25972 Troubleshooting chart Check the fuel level in the fuel tank. 1. Fuel There is enough fuel. There is no fuel. Supply fuel. Operate the kickstarter. 2. Compression There is compression. There is no compression.
8-1 1 2 3 4 5 6 7 8 9 MOTORCYCLE CARE AND STORAGE EAU37833 Matte color caution NO TICE ECA15192 Some models are equipped with matte colored finished parts. Be sure to consult a Yamaha dealer for advice on what products to use be- fore cleaning the vehicle.
MOTORCYCLE CARE AND STORAGE 8-2 2 3 4 5 6 7 8 9 off any detergent residue using plenty of water, as it is harmful to plastic parts. ● Do not use any harsh chemical products on plastic parts.
MOTORCYCLE CARE AND STORAGE 8-3 1 2 3 4 5 6 7 8 9 7. Wax all painted surfaces. 8. Let the motorcycle dry completely before storing or covering it. W ARNING EWA14501 Contaminants on the brakes or tires can cause loss of control. ● Make sure that there is no oil or wax on the tires.
MOTORCYCLE CARE AND STORAGE 8-4 2 3 4 5 6 7 8 9 “ OFF ” . 3. Drain the carburetor float chamber by loosening the drain bolt; this will prevent fuel deposits from building up.
9-1 1 2 3 4 5 6 7 8 9 SPECIFICATIONS EAU2633X Dimensions: Overall length: 1540 mm (60.6 in) Overall width: 640 mm (25.2 in) Overall height: 880 mm (34.6 in) Seat height: 635 mm (25.0 in) Wheelbase: 1055 mm (41.5 in) Ground clearance: 185 mm (7.28 in) Minimum turning radius: 1700 mm (66.
SPECIFICATIONS 9-2 2 3 4 5 6 7 8 9 26.00 ° Trail: 62.0 mm (2.44 in) Front tire: Type: With tube Size: 2.50-14 4PR Manufacturer/model: CHENG SHIN/KNOBBY Rear tire: Type: With tube Size: 3.00-12 4PR Manufacturer/model: CHENG SHIN/KNOBBY Loading: Maximum rider weight: 40.
10-1 1 2 3 4 5 6 7 8 9 10 CONSUMER INFORMATION EAU40791 Identification numbers Record the vehicle identification num- ber and model label information in the spaces provided below for assistance when ordering spare parts from a Yamaha dealer or for reference in case the vehicle is stolen.
INDEX A Air filter element, cleaning ......................... 7-8 Autolube pump, adjusting ........................ 7-19 B Brake lever ................................................ 4-2 Brake lever, checking and lubricating ...... 7-19 Brake lever free play, adjusting .
PRINTED ON RECYCLED PAPER Y AMAHA MO T OR CO. , L TD . PRINTED IN JAPAN 2009.04–0.2 × 1 ! (E).
Ein wichtiger Punkt beim Kauf des Geräts Yamaha PW80 (2009) (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Yamaha PW80 (2009) noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Yamaha PW80 (2009) - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Yamaha PW80 (2009) reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Yamaha PW80 (2009) erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Yamaha PW80 (2009) besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Yamaha PW80 (2009) verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Yamaha PW80 (2009). Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Yamaha PW80 (2009) gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
