Benutzeranleitung / Produktwartung CLP-611 des Produzenten Yamaha
Zur Seite of 72
IMPOR T ANT Check your power supply Make sure that y our local AC mains v oltage matches the voltage specified on the name plate on the bottom panel. In some areas a voltage selector may be provided on the bottom panel of the main keyboard unit near the power cord.
92-469 1 ENVIRONMENTAL ISSUES: Yamaha strives to pro- duce products that are both user safe and environmentally friendly. We sincerely believe that our products and the production methods used to produce them, meet these goals.
Owner’ s Manual English Bedienungsanleitung Deutsch Mode d’emploi Français Manual de instrucciones Español CLP-811 CLP-611 .
Intr oduction Thank you for choosing a Y amaha CLP-81 1/61 1 Clavinova. Y our Clavinova is a fine musical instr ument employing advanced Y amaha music technology . W ith pr oper care, your Clavinova will provide you with many years of musical pleasur e.
1 Contents Getting Ready ........................................................ 2 Music Stand ..................................................... 2 Ke y Cover ......................................................... 2 P owering Up ...............
2 Getting Ready Music Stand CLP-811 T o raise the stand: 1. Using two hands, take hold of the left and right sides of the music stand. Lift the stand upwards while at the same time rotating the top of the stand to ward you.
3 P owering Up 1. Connect the power cord. Insert one end of the po wer cord into the po wer connector on the Cla vinov a, and the other end into a standard w all outlet. (If your unit comes with a plug adaptor and its use is required, please connect it to the end of the cord before plugging in.
4 Panel Controls and Connectors Fr ont P anel CLP-811/611 P anel Controls and Connectors POWER MASTER VOLUME FUNCTION TRANSPOSE SPLIT VARIATION PIANO1 PIANO 2 CLAVI.
5 AC INLET MIDI AUX IN HOST SELECT TO HOST IN OUT RL / L+R THRU PC-2 PC-1 Mac MIDI AUX OUT RL / L+R P Q R ST U (CLP-811) AC INLET MIDI AUX IN HOST SELECT TO HOST IN OUT RL / L+R THRU PC-2 PC-1 Mac MIDI AUX OUT RL / L+R CLP-811/611 P anel Controls and Connectors Rear P anel P MIDI [IN] [OUT] [THRU] .
6 Basic Controls and Functions This section describes the basic controls and operational features of your Clavinova. Please read through this information carefully . Contr olling the Cla vinov a Y ou control the Clavinova functions by pressing the buttons on the panel.
7 Memory Backup The Clavino va includes a memory-backup featur e than can retain settings while po w er is of f and restore them when you r esume play .
8 BRILLIANCE REVERB EFFECT TOUCH TRANSPOSE MELLOW NORMAL BRIGHT ROOM HALL 1 HALL 2 STAGE CHORUS SYMPHONIC TREMOLO ECHO HARD MEDIUM SOFT FIXED SONG MEASURE TEMPO SPLIT FUNCTION MASTER VOLUME TRANSPOSE SPLIT BRILLIANCE REVERB EFFECT TOUCH VARIATION PIANO 1 PIANO 2 CLAVI.
9 Playing the Demos BRILLIANCE REVERB EFFECT TOUCH TRANSPOSE MELLOW NORMAL BRIGHT ROOM HALL 1 HALL 2 STAGE CHORUS SYMPHONIC TREMOLO ECHO HARD MEDIUM SOFT FIXED SONG MEASURE TEMPO SPLIT FUNCTION MASTER VOLUME TRANSPOSE SPLIT BRILLIANCE REVERB EFFECT TOUCH VARIATION PIANO 1 PIANO 2 CLAVI.
10 Playing the Piano Songs BRILLIANCE REVERB EFFECT TOUCH TRANSPOSE MELLOW NORMAL BRIGHT ROOM HALL 1 HALL 2 STAGE CHORUS SYMPHONIC TREMOLO ECHO HARD MEDIUM SOFT FIXED SONG MEASURE TEMPO SPLIT FUNCTION MASTER VOLUME TRANSPOSE SPLIT BRILLIANCE REVERB EFFECT TOUCH VARIATION PIANO 1 PIANO 2 CLAVI.
11 One-Hand Practice with Piano Songs Each piano song has its left-hand and right-hand parts recorded on separate tracks: the right-hand part in T rack [1], and the left-hand part in T rack [2]. This makes it possible for you to switch off either part at any time.
12 Repetition Practice with Piano Songs This feature lets you extract a phrase from any piano song and play it repeatedly . By combining this function with the “one-hand practice” feature described above, you can select and then practice a specific passage as many times as you like.
13 Selecting and Playing V oices Y our Clavinova o f fers you an excellent selection of great-sounding voices ( 1 1 voices on model CLP-6 1 1, 12 voices on model CLP-8 1 1). Y ou can use the V ARI A TION, BRIL- LIANCE, REVERB, and EFFECT features to vary the sound and feel of each voice.
14 Using the P edals This section explains the use of the instru- ment’ s three pedals. Damper (Right) Pedal The damper pedal functions in the same way as a damper pedal on an acoustic piano. While the damper pedal is pressed notes played ha ve a long sustain.
15 [BRILLIANCE] Use this feature to set the brightness of the output sound . Y ou can select from three l e vels. MELL O W Light, mellow tone NORMAL Standard brightness (=default setting) BRIGHT Clear and penetrating sound Procedure Press [BRILLIANCE] as neces- sary to select the desired setting, while w atching the screen.
16 Procedure Press [EFFECT] as necessary to select the desired setting, while w atching the screen. The screen sh o ws the current setting. (Nothing is sh o wn if the e f fect is set to OF F .) Changing the ef fect depth Hold d o wn the [EFFECT] b utton to display the depth setting for the currently selected e f fect.
17 TRANSPOSE This feature allows you to shift the pitch of the entire keyboard, so that you can continue to play in a signature that you are comfortable with while at the same time “transposing” to match the key of a singer or of another instru- ment.
18 Y ou can use function F4 to make v arious settings related to dual play — see page 29 for details. If you select [STRINGS] as one of the v oices, you can use function F4 to select a slo wer string attack. 2 T erminating DUAL mode... Pressing any one of the v oice selectors will select the corre- sponding voice and r eturn you to normal mode.
19 3 Select the voice for the right zone. Press a voice selector to select the voice for the right zone. 4 Select the voice for the left zone. Hold down [SPLIT] and pr ess a voice selector to select the voice. (The v oice indicator for the currently selected left-zone voice lights up while [SPLIT] is held down.
20 CLP-811/611 Using the Recorder Using the Recorder Y our Clavinova includes a two-track recorder that lets you record and play back a key- board performance. If you like, you can build a two-track song by recording separate performances (and separate voices) onto each track.
21 4 Select the track you want to record. The red indicator shows the currently selected track. If you wish to change the selection, press the appro- priate track button ( [1] or [2] ). 5 Start the recording. Recording begins automati- cally when you play a note at the keyboard .
22 Erasing a track T o erase a track, proceed as follows: (a) Press [REC] to enter RECORDING mode. (b) Select the track you want to erase (so that the indicator is red). (c) Press [ST AR T/STOP] twice. CLP-811/611 Using the Recorder Playback T o select a track for playback, press the corresponding track button so that the indicator comes on green.
23 CLP-811/611 Using the Recorder BRILLIANCE REVERB EFFECT TOUCH NORMAL ROOM MEDIUM Flashing TEMPO SONG Synchr o Star t The Synchro Start feature lets you set recorder playback so that it begins auto- matically when you play on the keyboard . T o select this feature simply hold down one of the recorded track buttons and press [ST AR T/STOP] .
24 CLP-811/611 Configuration Functions (FUNCTION mode) Configuration Functions (FUNCTION mode) The Clavinova‘s FUNCTION mode provides a variety of configuration functions that you can use to customize the operating environment. When you first receive the Clavinova, all parameters are preset to their factory defaults.
25 CLP-811/611 Configuration Functions (FUNCTION mode) Subfunctions 13.1 TxCh. (MIDI transmitting channel) 13.2 RxCH. (MIDI receiving channel) 13.3 Local (Local control ON/OFF) 13.4 PrgChg (Progr am Change enable/ disable) 13.5 CtrChg (Control Change enable/ disable) 13.
26 CLP-811/611 Configuration Functions (FUNCTION mode) Basic Pr ocedur e This section explains the procedure for viewing and changing the function settings.
27 CLP-811/611 Configuration Functions (FUNCTION mode) Function descriptions F1.T une (Ke yboard fine tuning) Y ou use this function to fine-tune the pitch over the entire keyboard. This function is useful, for example, when you need to adjust tuning when playing with other instruments.
28 CLP-811/611 Configuration Functions (FUNCTION mode) F3.Scale (T emperament selection) This function selects the tuning system, or tem- perament . The equal temperament now standard on present- day pianos was preceded by a series of other temperaments.
29 CLP-811/611 Configuration Functions (FUNCTION mode) F4.DualFunc. (Settings for DU AL mode .) Y ou use this function to set various parameters for DUAL-mode play . 1 T o access this function: first activate DUAL mode (by pressing two voice selectors at the same time), then press [FUNCTION] , and then pr ess [ t ] or [ s ] to proceed to F4.
30 CLP-811/611 Configuration Functions (FUNCTION mode) 5.2 S.Balance (V oice volume balance) V alues: 0,...,20 [10 = equal balance] [Right voice gets louder as v alue increases.] Default: V aries according to voice combination Sets the relati ve volumes for the two v oices.
31 CLP-811/611 Configuration Functions (FUNCTION mode) Subfunctions 6.1 ****** (Or gan type) [ Where “******” is replaced by the type name, such as “JAZZ ORGAN1”.
32 CLP-811/611 Configuration Functions (FUNCTION mode) F7.Metronome (Metr onome settings) This function sets the beat and volume for the metronome. 1 T o access these settings, enter FUNCTION mode and go to main function F7. 2 Next, press [+/YES] to enter the subfunction group.
33 CLP-811/611 Configuration Functions (FUNCTION mode) VELO (velocity) MIDI • The display for mat for incoming messages is as follo ws. Message T ype Indication Note on/off xxx:V el: yyy (where xxx = note name yyy = velocity) Program Change Prog # zzz Control Change Ctrl # zzz:zzz Exclusiv e Ex.
34 CLP-811/611 Configuration Functions (FUNCTION mode) F11.Damper (Number of damper-pedal le vels) Under normal settings, the length of the damper pedal’ s sustain effect varies according to how far you displace the pedal — the harder you step down, the longer the notes are held.
35 CLP-811/611 Configuration Functions (FUNCTION mode) 13.3 Local (Local control ON/OFF) V alues: ON, OFF Default: ON Selects whether the Clavino va keyboard pr oduces sound from the Clavinov a. More precisely , determines whether the Clavino va’ s keyboard dri ves the Clavino va’ s internal tone- generator system.
36 CLP-811/611 Configuration Functions (FUNCTION mode) 3 At the Cla vinova, select function F13 and mo ve to subfunction 13-8 BulkDump . 4 Press [+/YES] to begin the dump. The screen displays W orking w hile transmission is in progress, and then Completed to indicate that the operation is finished.
37 CLP-811/611 Configuration Functions (FUNCTION mode) P arameter s in Each Gr oup 14.1/15.1 V oice (V oice settings) • V oice selection • DUAL mode ON/OFF status and v oice combination • The [F4.DualFunc.] settings (for eac h voice combination) • SPLIT mode ON/OFF status and voice combination • The [F5.
38 POWER MASTER VOLUME FUNCTION TRANSPOSE SPLIT VARIATION PIANO1 PIANO 2 CLAVI.TONE E.PIANO1 E.PIANO2 VIBES STRINGS CHOIR HARPSI- CHORD PIPE ORGAN ORGAN COMBINATION BASS BRILLIANCE REVERB EFFECT TOUCH.
39 AC INLET MIDI AUX IN HOST SELECT TO HOST IN OUT RL / L+R THRU PC-2 PC-1 Mac MIDI AUX OUT RL / L+R (CLP-811) MIDI AUX IN HOST SELECT TO HOST IN OUT RL / L+R THRU PC-2 PC-1 Mac MIDI AUX OUT RL / L+R .
40 Connecting to a P ersonal Computer Although the CLP-81 1/61 1 can be connected to a personal computer via the MIDI IN/OUT connectors and a MIDI interface, the TO HOST connector and HOST SELECT swit.
41 2. Connecting to an IBM-PC/A T Series Computer Connect the T O HOST connector of the Clavinov a to the RS-232C port on your IBM compu- ter , using a standard 8-pin MINI DIN → 9-pin D-SUB cross cable. Set the HOST SELECT switch to the “PC-2” position.
42 T roubleshooting If you encounter what appears to be a malfunction, please check the follo wing points before assuming that your Cla vinov a is faulty . 1. No Sound When the Power is T urned ON Is the A C plug pr operly connected to the Clavinova and an A C w all outlet? Check the AC connection car efully .
43 CLP-811/611 Options Options ● BC-8 Bench A comfortable bench styled to match your Y amaha Clavino va. ● HPE-160 Stereo Headphones High-performance lightweight dynamic headphones with extra-soft ear pads.
44 CLP-811/611 Inde x Index • For a full overview of the contents of this manual: Refer to Contents on page 1. • T o locate information about specific buttons and connectors: Refer to Panel Controls and Connectors on pages 4 and 5. • T o locate information about FUNCTION-mode parameters: See the Function T able on pages 24 to 25.
45 CLP-811/611 Inde x S Setup File ............................................................ 35 Shor tcuts to FUNCTION mode T o [F4.DualFunc.] .......................................... 29 T o [F5.SplitFunc.] ..................................... 29-30 T o [F6.
46 Demo and Piano Songs Lists Listen der Demo-Songs und der Piano-Songs Liste des morceaux de démonstration et des morceaux de piano Listas de canciones de demostración y piano Demo Songs / Demo-Songs / Morceaux de démonstration / Canciones de demostración V oice Name T itle Composer Piano1 Ballad No.
47 Factor y Defaults / W erksvoreinstellungen Réglages d’usine par défaut / Ajustes de fábrica The following is a listing of the Clavinova’ s factory defaults. Die folgende Liste ist eine Zusammenstellung der werksseitigen V oreinstellungen des Clavinova.
48 MIDI Data Format Intr oduction to MIDI MIDI (for “Musical Instrument Digital Interface”) is an internationally recognized standard for com- munication of musical performance and control data among supporting de vices. Such devices include electronic musical instruments, computers, and sequencers.
49 CLP-811/611 MIDI Data F or mat/MIDI-Datenformat/Format de données MIDI/F or mato de datos MIDI Format de données MIDI Introduction au système MIDI Le système MIDI, de l’anglais “Musical Ins.
50 1. NO TE ON/OFF [9nH] → [kkH] → [vvH] 9nH = Note ON/OFF e vent (n = Channel No.) kkH = Note No. (Sending: 09H~78H = A-2~C8) (Receiving: 00H~7FH = C-2~G8) *1 vvH = velocity (Note ON = 01H~7FH. Note OFF = 00H.) [8nH] → [kkH] → [vvH] 8nH = Note OFF (n = Channel No.
51 (52)~(68) Organ Combination data 2 (69)~(85) Organ Combination data 3 (86)~(102) Organ Combination data 4 (103)~(119) Organ Combination data 5 (120)~(136) Organ Combination data 6 (137)~(153) Organ Combination data 7 (154)~(170) Organ Combination data 8 * T he Clavino va does not accept requests to transfer panel data.
52 <T able 4> Effect MIDI Map (REVERB) MSB LSB 00H 01H 02H 03H~ 00H No effect ←←← 01H HALL 1 HALL 2 HALL 1 ← 02H ROOM ←←← 03H ST AGE ←←← <T able 5> Effect MIDI Map (V A.
53 Specifications / T echnische Daten Spécifications techniques / Especificaciones CLP-811 CLP-611 K eyboard 88 ke ys (A-1 to C7) T one Generator A WM (Advanced W ave Memory) Polyphony 64 notes max.
54 2 3 1 CLP-811 Assembly Procedure NOTE • Be careful not to confuse par ts, and be sure to install all parts in the correct direction. Please assemble in accordance with the sequence given belo w . • Assembly should be carried out by at least two persons .
55 Lower board (E) Unterseite (E) Panneau inférieur (E) Panel inferior (E) Power cord (F) Netzkabel (F) Cordon d’alimentation (F) Cable de alimentación (F) Backboard (D) Rückseite (D) Panneau arr.
56 6 5 5 Install backboard (D). Rest the bottom of backboard (D) on the leg ledges (on both sideboards), and piv ot the top of the board into place. Fasten the upper part of the backboard to the two side- boards using the short roundhead scre ws 5 . Fasten the lower part of the backboard in four places using the tapered screws 4 .
57 7 CLP-811/611 CLP-811 Assembly Procedure/Montage des CLP-811/CLP-811 Montage Procédure/Montaje del modelo CLP-811 5 Installer le panneau arrière (D) Reposer le bas du panneau arrière (D) sur le rebord des pieds (des deux panneaux latéraux) et faire piv oter le dessus du panneau pour le mettre en place.
58 8 AC INLET A C IN LE T Two cord clamps 6 Zwei Kabelhalter 6 Deux pinces de fixation pour câbles 6 Dos bridas de cable 6 8 Connect up the pedal cord and power cord. Hold the pedal-cord connector so that the hook is facing away from the backboard, the backboard, and plug it into the main unit.
59 9 0 240 127 110 220 CLP-811/611 CLP-811 Assembly Procedure/Montage des CLP-811/CLP-811 Montage Procédure/Montaje del modelo CLP-811 8 Raccorder le cordon des pédales et le cordon d’alimentation.
60 Phone jacks Klinkenbuchsen Prises pour casque d’écoute Tomas de auriculares Styrofoam pads Styroporteile Coussinets en mousse Planchas de poliestireno CLP-611 Assembly Procedure NOTE • Be careful not to confuse par ts, and be sure to install all par ts in the correct direction.
61 4 CLP-811/611 CLP-611 Assembly Procedure/Montage des CLP-611/CLP-611 Montage Procédure/Montaje del modelo CLP-611 CLP-611 Montage Procédure REMARQUE • V eiller à ne pas mélanger les pièces et à les installer dans le sens correct. V euillez assembler l’instrument dans l’ordre indiqué ci-dessous.
62 5 Install lower board (E). Unrav el the pedal cord bundled to the bottom of lo wer board (E). Then align the ends of lo wer board (E) with the right sideboard (C) and left sideboard (B). Fasten board (E) in place with the four medium roundhead scre ws 2 .
63 Four medium flathead screws 3 Vier mittlere Flachkopfschrauben 3 Quatre vis moyennes à tête plate 3 Cuatro tornillos medianos de cabeza plana 3 (6 ✕ 20mm) 8 7 CLP-811/611 CLP-611 Assembly Proce.
64 AC INLET Two cord clamps 6 Zwei Kabelhalter 6 Deux pinces de fixation pour câbles 6 Dos bridas de cable 6 A C IN L E T 9 Connect up the pedal cord and power cord. Hold the pedal-cord connector so that the hook is facing away from the backboard, and plug it into the main unit.
65 0 A 240 127 110 220 CLP-811/611 CLP-611 Assembly Procedure/Montage des CLP-611/CLP-611 Montage Procédure/Montaje del modelo CLP-611 9 Raccorder le cordon des pédales et le cordon d’alimentation.
FCC INFORMA TION (U .S.A.) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions con- tained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product.
WARNING- When using any electrical or electronic prod- uct, basic precautions should always be followed. These pre- cautions include, but are not limited to, the following: 1.
IMPOR T ANT Check your power supply Make sure that y our local AC mains v oltage matches the voltage specified on the name plate on the bottom panel. In some areas a voltage selector may be provided on the bottom panel of the main keyboard unit near the power cord.
Ein wichtiger Punkt beim Kauf des Geräts Yamaha CLP-611 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Yamaha CLP-611 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Yamaha CLP-611 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Yamaha CLP-611 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Yamaha CLP-611 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Yamaha CLP-611 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Yamaha CLP-611 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Yamaha CLP-611. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Yamaha CLP-611 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
