Benutzeranleitung / Produktwartung CLP-411 des Produzenten Yamaha
Zur Seite of 54
.
92-469 1 ENVIRONMENTAL ISSUES: Yamaha strives to pro- duce products that are both user safe and environmentally friendly. We sincerely believe that our products and the production methods used to produce them, meet these goals.
English Owner ’ s Manual Deutsch Bedienungsanleitung Français Mode d’emploi Español Manual de instrucciones CLP-411 CLP-511.
Introduction Thank you for choosing a Y amaha CLP-41 1/51 1 Clavinova. Y our Clavinova is a fine musical instrument that employs advanced Y amaha music technology . W ith the pr oper car e, your Clavinova will give you many years of musical pleasur e.
Contents 1 The Control Panel .......................................................... 2 Connections ................................................................... 5 Selecting & Playing V oices ............................................ 6 Playing the Demonstration T unes .
2 The Control Panel CLP-511 CLP-411 MASTER VOLUME FUNCTION TRANSPOSE SPLIT VARIATION PIANO 1 PIANO 2 CLAVI.TONE E.PIANO 1 E.PIANO 2 STRINGS HARPSI- CHORD PIPE ORGAN 1 PIPE ORGAN 2 REVERB ROOM HALL 1 H.
3 The Control Panel 1 [POWER] Switch Press the [POWER] switch once to turn the power ON, a second time to turn the power OFF . When the power is initially turned ON, a voice selector LED will light, and the power indicator located below the left end of the keyboard will light.
4 0 [METRONOME] Button T urns the metronome sound on and off. The [TEMPO/SONG] but- tons, below , are used to set the tempo of the metronome sound, and the volume of the metronome sound if used while the [METRONOME] button is held — page 16.
5 Connections 1 A UX IN L and R Jacks (CLP-511: L/L+R and R) These jacks are intended for use with an external tone generator module such as the Y amaha DOU-10 Disk Orchestra Unit.
6 Selecting & Playing V oices T urn P o wer On .................................................................................................. After making sure that the Clavinova’ s AC cord .
7 Demonstration tunes are provided that eff ectively demonstrate each of the Clavino va ’ s voices . There are also 30 piano songs that you can pla y individually , all in sequence, or in random order . Here ’ s how y ou can select and pla y the demo tunes.
8 Piano Song A-B Repeat The A-B Repeat function can be used to continuously repeat a specified phrase within a piano song. Combined with the Part Cancel function described below , this provides an excellent way to practice difficult phrases. Specify the Beginning (A) of the Phrase .
9 Piano Song P ar t Cancel (CLP-511) The 30 piano songs provided on the CLP-51 1 have separate left- and right-hand parts that can be turned on and off as required so you can practice the corresponding part on the keyboard. The right-hand part is played by the recorder ’ s [1] track, and the left-hand part is played by recorder ’ s [2] track.
10 The Dual Mode The dual mode makes it possible to play two voices simultaneously across the entire range of the keyboard. T o activate the dual mode simply press two voice selectors at the same time (or press one voice selector while holding another).
11 The Split Mode (CLP-511) The split mode makes it possib le to pla y tw o different v oices on the ke yboard — one with the left hand and another with the right hand.
12 Reverb The [REVERB] button selects a n umber of digital re v erb eff ects that you can use f or e xtra depth and e xpressive po wer . T o select a reverb type press the [REVERB] button a few times until the indicator corresponding to the desired type lights (the indica- tors light in sequence each time the [REVERB] button is pressed).
13 The Chorus Effect The [EFFECT] button engages a chorus effect that can giv e your sound greater depth and animation. The [EFFECT] button turns the chorus ef fect on (indicator lit) and of f (indicator off). NOTE • The default effect on/off settings are different for each voice.
14 T ouch Sensitivity F our diff erent types of k eyboard touch sensitivity — HARD , MEDIUM, SOFT or FIXED — can be selected to match diff erent pla ying styles and pref erences.
15 T uning T uning makes it possible to adjust the pitch of the Cla vino va o v er a 427.0 Hz … 453.0 Hz (corresponding to the A3 note ’ s Hz) range in appro ximately 0.2 Her tz inter vals . Pitch control is useful for tuning the Cla vino v a to match other instruments or recorded music.
16 The Metronome & T empo Control The CLP-411/511 built-in metronome is a con v enient f eature f or pr actice, and it can also provide a solid rhythmic guide when recording using the Recorder f eature, described below . The Metronome The metronome sound is alternately turned on and off by pressing the [METRONOME] button.
17 Using the Recorder The CLP-411 has a 1-trac k recorder and the CLP-511 f eatures a two-trac k recorder that let you record what you play on the keyboard and then play it back. T wo trac ks on the CLP-511 mean that you can “ ov erdub ” one par t on top of another , using a different v oice if you like .
18 Using the Recorder Start Recording ................................................................................................ Recording will begin automatically as soon as you play a note on the keyboard or press the [ST ART/ST OP] button. The current measure number will appear on the display while recording.
19 Using the Recorder Pla ybac k T o play back what you’ve recorded on the CLP-41 1, simply press the RECORDER [ST ART/ST OP] button. On the CLP-51 1 first make sure that the green track indicators of the tracks you want to play are lit. If not, press the corresponding track button(s) so that they are lit.
20 The Function Mode The [FUNCTION] button provides access to a range of functions that give the CLP-411/511 e xtraordinary versatility . The functions are categor ized in groups as follows: CLP-411 CLP-511 F1 F1 T uning ..............................
21 The Function Mode F1 T uning F2 Scale In addition to the tuning method described on page 15, overall tuning can also be accom- plished via the F1 function. After selecting “F1”, use the [–/NO] and [+/YES] buttons to lower or raise the pitch in 0.
22 The Function Mode F3 Dual Mode Functions After selecting “ F3.Y ”, press the [+/YES] button to engage the dual-mode function sub- mode, then use the [ < ] and [ > ] buttons to select the desired dual mode function, as listed below . If the Dual mode is not engaged “ F3.
23 The Function Mode F3.5: 1st V oice Effect Depth ............................................................................................................ F3.6: 2nd V oice Effect Depth .............................................................
24 The Function Mode F4.2: Split Balance ..................................................................................................................................... The volume levels of the two voices combined in the split mode can be adjusted as re- quired by using this function.
25 The Function Mode F5 CLP-511 Metr onome Functions After selecting “ F4.Y ” or “ F5.Y ”, press the [+/YES] button to engage the metronome function sub-mode, then use the [ < ] and [ > ] buttons to select the desired metronome func- tion, as listed below .
26 The Function Mode F8 CLP-511 MIDI Functions ● A Brief Intr oduction to MIDI MIDI, the Musical Instrument Digital Interface, is a world- standard communication interface that allows MIDI-compatible musical instruments and equipment to share musical information and control one another .
27 The Function Mode In any MIDI control setup, the MIDI channels of the transmitting and receiving equipment must be matched for proper data transfer .
28 The Function Mode F6.5/F8.5: Control Change ON/OFF ........................................................................................ Normally the Clavinova will respond to MIDI control chang.
29 The Function Mode F9 (CLP-511) Bac kup Functions After selecting “ F9.Y ”, press the [+/YES] button to engage the backup function sub-mode, then use the [ < ] and [ > ] buttons to select the desired backup function, as listed below .
30 Connecting to a Personal Computer Although the CLP-411/511 can be connected to a personal computer via the MIDI IN/OUT connectors and a MIDI interf ace , the TO HOST connector and HOST SELECT s wit.
31 Connecting to an IBM-PC/A T Series Computer ............ Connect the T O HOST connector of the Clavinova to the RS-232C port on your IBM computer , using a standard 8-pin MINI DIN → 9-pin D-SUB cross cable. Set the HOST SELECT switch to the “PC-2” position.
32 T roubleshooting If you encounter what appears to be a malfunction, please check the follow- ing points bef ore assuming that y our Clavino v a is f aulty . 1. No Sound When the P ower is T urned ON Is the AC plug properly connected to the Clavinova and an AC wall outlet? Check the AC connection carefully .
33 Factor y Preset Recall (CLP-511) Options & Expander Modules ● Options BC-8 Bench A comfortable bench styled to match your Y amaha Clavinova. HPE-160 Stereo Headphones High-performance lightweight dynamic headphones with extra-soft ear pads.
34 1 NOTE • We do not recommend attempting to assemble the Clavinova alone. The job can be easily accomplished, however, with only two people. • Use only the screws provided or replacements of exactly the specified size. Using screws of the wrong size can result in damage to the instrument.
35 2 3 CLP-411: Assemblage du support de clavier REMARQUE • Nous ne vous conseillons pas d ’ essayer d ’ assembler le Clavinova seul. Toutefois, ce travail peut ê tre facile- ment ex é cut é par deux personnes. • N ’ utilisez que les vis fournies ou des vis ayant exacte- ment les m ê mes dimensions.
36 4 V Montieren Sie die Tastatureinheit (A). Setzen Sie die Tastatureinheit (A) so auf den fertigen Ständer, daß die beiden Schrauben an ihrer Unterseite hinter den Winkel- blechen mit Führungsschlitz an der Hinterseite des Ständers zu liegen kommen.
37 5 V Posez le clavier (A) Placez le clavier sur les panneaux latéraux (D), avec les vis de son panneau inférieur (situées vers l’arrière du clavier) placées immédiatement derrière les rainu.
38 1 NOTE • We do not recommend attempting to assemble the Clavinova alone. The job can be easily accomplished, however, with only two people. • Use only the screws provided or replacements of exactly the specified size. Using screws of the wrong size can result in damage to the instrument.
39 R L 2 3 CLP-511: Assemblage du support de clavier REMARQUE • Nous ne vous conseillons pas d ’ essayer d ’ assembler le Clavinova seul. Toutefois, ce travail peut ê tre facile- ment ex é cut é par deux personnes. • N ’ utilisez que les vis fournies ou des vis ayant exacte- ment les m ê mes dimensions.
40 R L 4 V Montieren Sie die R ü ckwand (B). Setzen Sie die Rückwand leicht abgewinkelt, wie in der Abbil- dung gezeigt, hinter dem Pedalkasten auf die hervorspringenden Teile der Füße auf.
41 5 V Fixez le panneau arri è re (B) En inclinant légèrement en angle le panneau arrière, comme mentionné sur l’illustration, abaissez-le sur le rebord des pieds, à l’arrière du pédalier.
42 6 N Schlie ß en Sie das Pedalkabel an. Das vom Pedalkasten kommende Kabel wird an die entspre- chende Buchse der Tastatureinheit angeschlossen. Der Kabel- stecker paßt nur in einer Ausrichtung in die Buchse (mit der Führungsnase zur Rückseite des Instruments weisend, wie in der Abbildung verdeutlicht).
43 7 N Raccordez le cordon du p é dalier Le cordon qui sort du pédalier doit être branché sur le connecteur correspondant du clavier. La prise ne s’enclenche que d’une seule manière (la cosse.
44 2.1.(9) Effect4 Depth ( Variation Effect Send Level ) Cntrl# Parameter Data Range 94 Effect4 Depth 0...127 2.2 Mode Messages The following Channel Mode messages are supported.
45 3. PROGRAM CHANGE Data format: [CnH] -> [pp] CnH = program event (n = channel number) pp = Program number CLP-511 pp VOICE NAME 00 PIANO 1 01 PIANO 2 88 CLAVINOVA TONE 05 E. PIANO 1 04 E. PIANO 2 06 HARPSICHORD 48 STRINGS 19 PIPE ORGAN 1 16 PIPE ORGAN 2 CLP-411 pp VOICE NAME 00 PIANO 88 CLAVINOVA TONE 05 E.
46 (5) XG Native Bulk Data (reception only) Data format: [F0H] -> [43H] -> [0nH] -> [4CH] -> [aa] -> [bb] -> [hh] -> [mm] -> [ ll ] -> [dd] ->...-> [cc] -> [F7H] F0 Exclusive status 43 YAMAHA ID 0n When n is received n=0~F, whichever is received.
47 KEYBOARD POLYPHONY VOICE SELECTORS REVERB TOUCH SENSITIVITY RECORDER PEDAL CONTROLS OTHER CONTROLS JACKS/CONNECTORS INPUT & OUTPUT LEVEL/IMPEDANCE MAIN AMPLIFIERS SPEAKERS DIMENTIONS Music stand down (W x D x H) Music stand up WEIGHT CLP-411 CLP-511 88 KEYS (A-1 ~ C7) 32 NOTES MAX.
48 CLP-411 CLP-511 Voice PIANO PIANO 1 Dual Mode OFF Split Mode — OFF Split Mode Left-hand Voice — STRINGS Reverb Type ROOM Reverb Depth 10 Effect OFF Effect Depth Preset for each voice Transpose .
WARNING- When using any electrical or electronic prod- uct, basic precautions should always be followed. These pre- cautions include, but are not limited to, the following: 1.
FCC INFORMA TION (U .S.A.) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions con- tained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product.
Ein wichtiger Punkt beim Kauf des Geräts Yamaha CLP-411 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Yamaha CLP-411 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Yamaha CLP-411 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Yamaha CLP-411 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Yamaha CLP-411 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Yamaha CLP-411 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Yamaha CLP-411 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Yamaha CLP-411. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Yamaha CLP-411 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
