Benutzeranleitung / Produktwartung 701P46985 des Produzenten Xerox
Zur Seite of 34
Version 6.0.xx, May 2007 701P46985 Getting ready for the Xerox ® FreeFlow ® Print Server Installation.
.
Prepared by: Xerox Corporation Global Knowledge and Language Services 800 Philips Road Bldg. 845-17S Webster, New York 14580 USA ©2007 by Xerox Corporation.
Product Recycling and Disposal If you are managing the disposal of y our Xerox product, pl ease note that the product contains lead, mercury, and ot her materials w hose disposal may be regulated due to environmental c onsiderations in certain countries or states.
Table of contents Table of conten ts .............................................................................................................. ...................................... 1 Installation w orksh eets ....................................
.
XEROX FREEFLOW PRINT SERVER 1 GETTING REA DY FOR THE PRINT SERVER INSTALLA TION Installation worksheets The Getting Ready for the Xerox® FreeFlow® Print Server 6.
FREEFLOW PRINT SERVER 6.0.xx 2 XEROX FREEFLOW PRINT SERVER GETTING REA DY FOR THE PRINT SERVER INSTALLA TION Available worksheets The following is a list of the worksheets that support the installation of the FreeFlow Print Server software: • Worksheet W-1: Solaris Operating System software Complete this worksheet fo r each print server.
FREEFLOW PRINT SERVER 6.0.xx XEROX FREEFLOW PRINT SERVER 3 GETTING REA DY FOR THE PRINT SERVER INSTALLA TION • Worksheet W-8: AppleTalk Gateway installation This information is used by t he Xerox service representative to set up the AppleTalk Gateway.
FREEFLOW PRINT SERVER 6.0.xx 4 XEROX FREEFLOW PRINT SERVER GETTING REA DY FOR THE PRINT SERVER INSTALLA TION About the worksheets The worksheets contain a combination of the following elements: • The Data Element column contains a list of the specific items of information needed to perform the procedure identified in the worksheet titl e.
FREEFLOW PRINT SERVER 6.0.xx XEROX FREEFLOW PRINT SERVER 5 GETTING REA DY FOR THE PRINT SERVER INSTALLA TION W-1: Solaris operating system worksheet The Xerox service representative uses the following information during the installation of the Solaris operating system on the print server.
FREEFLOW PRINT SERVER 6.0.xx 6 XEROX FREEFLOW PRINT SERVER GETTING REA DY FOR THE PRINT SERVER INSTALLA TION Domain Name LDAP Profile Name Profile Server IP Address 10 Geographic Region 11 Time Zone 1.
FREEFLOW PRINT SERVER 6.0.xx XEROX FREEFLOW PRINT SERVER 7 GETTING REA DY FOR THE PRINT SERVER INSTALLA TION W-1 data element definitions Primary Network Interface: Product Controller/Server Value iGe.
FREEFLOW PRINT SERVER 6.0.xx 8 XEROX FREEFLOW PRINT SERVER GETTING REA DY FOR THE PRINT SERVER INSTALLA TION your customer’ s com pany. The customer network administrator assigns IP address numbers within this set to each host and workstation on the network.
FREEFLOW PRINT SERVER 6.0.xx XEROX FREEFLOW PRINT SERVER 9 GETTING REA DY FOR THE PRINT SERVER INSTALLA TION Asia, Eastern Asia, Australia /New Zealand, Canada, Europe, Central America, South America, United States, Other (offset from GMT), and Other (specify rules file).
FREEFLOW PRINT SERVER 6.0.xx 10 XEROX FREEFLOW PRINT SERVER GETTING REA DY FOR THE PRINT SERVER INSTALLA TION W-2: Xerox Security worksheet Security is automatically installed and set to the default secure mode of Low. Security can be modified from High (fully secure) to None (not secure) through the FreeFlow Print Server interface.
FREEFLOW PRINT SERVER 6.0.xx XEROX FREEFLOW PRINT SERVER 11 GETTING REA DY FOR THE PRINT SERVER INSTALLA TION Profile Characteristics Value Legacy Compatibility Comments None • Default operating system only For customers that have a physically closed environment Close to DocuSP 2.
FREEFLOW PRINT SERVER 6.0.xx 12 XEROX FREEFLOW PRINT SERVER GETTING REA DY FOR THE PRINT SERVER INSTALLA TION W-3: Xerox FreeFlow Print Server softw are worksheet The Xerox service representative uses the following information during the installation of the FreeFlow Print Server software.
FREEFLOW PRINT SERVER 6.0.xx XEROX FREEFLOW PRINT SERVER 13 GETTING REA DY FOR THE PRINT SERVER INSTALLA TION W-3 data element definitions NOTE: A new user will be created on the print server to accept print jobs from command line clients at either a UNIX or PC workstation, or both.
FREEFLOW PRINT SERVER 6.0.xx 14 XEROX FREEFLOW PRINT SERVER GETTING REA DY FOR THE PRINT SERVER INSTALLA TION W-4: System configuration worksheet The Xerox service representative uses the following information during the set up and configuration of the dC105 diagnostics screen.
FREEFLOW PRINT SERVER 6.0.xx XEROX FREEFLOW PRINT SERVER 15 GETTING REA DY FOR THE PRINT SERVER INSTALLA TION W-4 data element definitions Server Serial Number: The serial number for the print server platform. Printer Serial Number: The serial number for the printer.
FREEFLOW PRINT SERVER 6.0.xx 16 XEROX FREEFLOW PRINT SERVER GETTING REA DY FOR THE PRINT SERVER INSTALLA TION IP Address of Default Router: The default router lP address is a unique 4 byte, 32-bit numeric value that identifies the machine that is acting as the main router .
FREEFLOW PRINT SERVER 6.0.xx XEROX FREEFLOW PRINT SERVER 17 GETTING REA DY FOR THE PRINT SERVER INSTALLA TION W-5: Print Server software and gatew ays worksheet Indicate which gateways and ot her software features have been selected by the customer to be licensed on the print server.
FREEFLOW PRINT SERVER 6.0.xx 18 XEROX FREEFLOW PRINT SERVER GETTING REA DY FOR THE PRINT SERVER INSTALLA TION W-6: Network configuration w orksheet Fill out the appropriate worksheet for the network configuration the customer is using.
FREEFLOW PRINT SERVER 6.0.xx XEROX FREEFLOW PRINT SERVER 19 GETTING REA DY FOR THE PRINT SERVER INSTALLA TION DNS (Domain Name System) DNS provides the ability to map hostnames to IP addresses, as well as a mechanism for storing and retrieving information on the network.
FREEFLOW PRINT SERVER 6.0.xx 20 XEROX FREEFLOW PRINT SERVER GETTING REA DY FOR THE PRINT SERVER INSTALLA TION Active Directory Services (ADS) Active Directory Services is a Windows-based name service typically used with Windows NT or 2000.
FREEFLOW PRINT SERVER 6.0.xx XEROX FREEFLOW PRINT SERVER 21 GETTING REA DY FOR THE PRINT SERVER INSTALLA TION Ethernet MAC Address Automatically filled in W-7: Novell NetWare gateway installation worksheet Fill out this worksheet only if the customer has purchased the Novell Connectivity — QServer gateway.
FREEFLOW PRINT SERVER 6.0.xx 22 XEROX FREEFLOW PRINT SERVER GETTING REA DY FOR THE PRINT SERVER INSTALLA TION W-7 data element definitions This section defines the dat a elements determined by the net.
FREEFLOW PRINT SERVER 6.0.xx XEROX FREEFLOW PRINT SERVER 23 GETTING REA DY FOR THE PRINT SERVER INSTALLA TION Version 3.25 June 17, 1993 Hardware setting: I/O Port 320h to 33Fh, Interrupt 2h Node address: 00009B99E9B9 Frame type: ETHERNET II Boardname: DOCUTECH LAN protocol: ARP LAN protocol: IP address 13.
FREEFLOW PRINT SERVER 6.0.xx 24 XEROX FREEFLOW PRINT SERVER GETTING REA DY FOR THE PRINT SERVER INSTALLA TION W-8: AppleTalk Gateway installation worksheet If the customer has purchased the AppleTalk Connectivity — Apple PAP gateway, fill out this worksheet.
FREEFLOW PRINT SERVER 6.0.xx XEROX FREEFLOW PRINT SERVER 25 GETTING REA DY FOR THE PRINT SERVER INSTALLA TION If the EtherTalk 2.0 icon appears, double-click the icon and see if an Internet router is found.
FREEFLOW PRINT SERVER 6.0.xx 26 XEROX FREEFLOW PRINT SERVER GETTING REA DY FOR THE PRINT SERVER INSTALLA TION W-9: SNMP Gateway installation worksheet If the customer is planning on using the SNMP Gateway, fill out this worksheet. When SNMP is installed and licensed, items such as the Printer ID are automatically configured.
FREEFLOW PRINT SERVER 6.0.xx XEROX FREEFLOW PRINT SERVER 27 GETTING REA DY FOR THE PRINT SERVER INSTALLA TION W-10: Client workstations The client submission software is now available in the following: ♦ CentreWare drivers designed and packaged for each supported printer.
FREEFLOW PRINT SERVER 6.0.xx 28 XEROX FREEFLOW PRINT SERVER GETTING REA DY FOR THE PRINT SERVER INSTALLA TION W-12: Data Overwrite and Backup Configuration If the customer has agreed to enable and use data overwrite and/or backup services, the following information is necessary to configure the FreeFlow Print Server.
Ein wichtiger Punkt beim Kauf des Geräts Xerox 701P46985 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Xerox 701P46985 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Xerox 701P46985 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Xerox 701P46985 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Xerox 701P46985 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Xerox 701P46985 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Xerox 701P46985 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Xerox 701P46985. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Xerox 701P46985 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
