Benutzeranleitung / Produktwartung 1F97W-71 des Produzenten White Rodgers
Zur Seite of 40
OPERA TION GUIDE 7-Day Programmable Electronic Digital Thermostat 1F97W -71 Operator: Save this booklet for future use! WHITE-RODGERS WHITE-RODGERS.
2 About Y our New Thermostat . . . Your new White-Rodgers Digital Thermostat uses the technology of a solid-state microcomputer to provide precise time/temperature control. This thermostat offers you the flexibility to design heating and cooling programs that fit your needs.
3 ENTERING YOUR PROGRAM Set Current Time and Day Select Heating and Cooling Temperatures Program Heating/Cooling Times and Heating Temperatures Program Cooling Temperatures Using the HOLD/COPY Button CHECK YOUR PROGRAMMING QUESTIONS AND ANSWERS ......
4 • Seven independent day programming • Simultaneous heat and cool program storage • Four separate time/temperature settings per 24-hour period • Computed Energy Management Recovery (EMR) • .
5 OPERA TING YOUR THERMOST A T Before you begin programming your thermostat, you should be familiar with its features and with the display and the location and operation of the ther- mostat buttons. The information in this section will help you become familiar with your new thermostat so that you can easily program it.
6 connect the three pin connectors on the lower portion of the thermostat back. Gently push until the snap connectors engage. DO NOT FORCE OR PRY THE THERMOSTAT, as this may dam- age the unit. PARTS OF THE THERMOSTAT The Back of The Thermostat Body Turn the thermostat body over.
7 2. You may adjust the option switches for EMR, keypad lockout, and automatic changeover from heat to cool (see OPERATING FEATURES ). Other than and , the buttons are lo- cated behind the thermostat door. To open the door, pull the door out from the top, then swing the door down on its hinges.
8 The word BATTERY flashes on the display when the "AA" alkaline batteries are weak and should be replaced. The word BATTERY is displayed continuously (non-flashing) when thermostat is running on battery power only. FAN ON is displayed when the blower is operating continuously.
9 1 2 3 4 6 6 A B 2 3 4 FAN AUTO FAN ON FAN AUTO 5 BATTERY TIME FWD SYSTEM HEAT-OFF-COOL-AUTO SET CLOCK VIEW PRGM HOLD COPY TIME BACK FAN ON - AUTO ADV DAY VIEW TEMP RUN PRGM.
10 Used to initiate or review thermostat program- ming. Used to select heating and cooling tempera- tures to be programmed. Used to manually override programming to hold at a selected temperature (when HOLD is displayed). Also used to copy one day's programming into another (when COPY is displayed).
11 10 11 12 13 14 15 16 17 18 9 7 8 FAN AUTO TIME FWD SYSTEM HEAT-OFF-COOL-AUTO SET CLOCK VIEW PRGM HOLD COPY TIME BACK FAN ON - AUTO ADV DAY VIEW TEMP RUN PRGM.
12 OPERATING FEATURES Now that you are familiar with the thermostat display and buttons, read the following information to learn about the many features of the thermostat.
13 AUTOMATIC CHANGEOVER to determine proper positions of Group B option switches #1 and #2. EMR Switch Positions Switch #1 (see AUTOMATIC CHANGEOVER ) Switch #2 (see AUTOMATIC CHANGEOVER ) Switch #3 O.
14 (the setpoint temperature display is blank in the AUTO mode). The system will now auto- matically switch between heating and cooling, depending on the actual room temperature.
15 the selected setting until you press RUN PRGM to start program operation again. This feature is ideal for energy conservation when the build- ing is unoccupied for an extended period of time. • ° F/ ° C CONVERTIBILITY — Press TIME FWD and TIME BACK at the same time until the temperature display is in ° C (Celsius).
16 press TIME BACK to decrease the cycle time. To set cooling anticipation, press SET CLOCK and ADV DAY at the same time again. The display will show COOL 14 (factory preprogrammed cooling anticipation). Use the TIME FWD and TIME BACK but- tons to adjust anticipation.
17 • AUDIO PROMPTING — Each time you press a button, the thermostat will beep. • BACKLIT DISPLAY — When you press any button on the thermostat, the display is lit for approximately eight seconds.
18 Total Keypad Lockout Switch Positions Switch #1 ON Switch #2 OFF To enable total keypad lockout, move Group A option switch #1 to ON (see figure above). To disable total keypad lockout, move option switch #1 to OFF . ON 12 Group A Option Switches PROGRAMMING YOUR THERMOST A T PROGRAMMING Now you are ready to program your thermostat.
19 PLANNING FOR YOUR NEEDS First, answer the following questions to help you decide what your needs are. If you are using the thermostat for a commercial application (a store, office building, etc.), answer questions 1 through 4. If you are using the thermostat in your home, answer questions 5 through 8.
20 6a. What time does the last person leave the house in the morning? b. What temperature should the house be at this time? These will be your DAY temperature settings. 7a. What time does the first person arrive home in the evening? b. What temperature should the house be at this time? These will be your EVE (evening) temperature settings.
21 est heat temperature and the lowest cool tempera- ture (see diagram below). 2. Determine the time periods during which you will program the temperatures you have just selected. You must program four periods for each day (periods 1, 2, 3, and 4). However, you may use the same heating and cooling temperatures for consecutive time periods.
22 different time periods for each day separately (for example, heating/cooling period 1 on Mon- day may begin at 5:00 AM, but heating/cooling period 1 on Saturday may begin at 9:00 AM). Use the following table to plan your program time periods, and the temperatures you want during each period.
23 Period 1 Period 2 Period 3 Period 4 Time Heat Temp. Cool Temp. Time Heat Temp. Cool Temp. Time Heat Temp. Cool Temp. Time Heat Temp. Cool Temp. Monday Tuesday Wednesday Thursday Friday Saturday Sun.
24 Period 1 Period 2 Period 3 Period 4 Time Heat Temp. Cool Temp. Time Heat Temp. Cool Temp. Time Heat Temp. Cool Temp. Time Heat Temp. Cool Temp. Monday Tuesday Wednesday Thursday Friday Saturday Sun.
25 3. Press SET CLOCK once. The display window will show the hour only. EXAMPLE: 4. Press and hold either TIME FWD or TIME BACK until you reach the correct hour and AM/PM designa- tion ( AM begins at midnight; PM begins at noon). 5. Press SET CLOCK once.
26 temperature ( HEAT A ). At the right of the display is the currently programmed HEAT A setting. 3. Press either or to change the temperature to your selected HEAT A setting (if you only want to program a temperature for HEAT A , skip to step 7.) 4.
27 Program Heating/Cooling Times and Heating Temperatures 1. Press SYSTEM HEAT-OFF-COOL-AUTO until HEAT is displayed. 2. Press VIEW PRGM once. MON , the abbreviation for Monday, and the number 1 , representing the first heating/cooling period, will be displayed.
28 time and heating temperature for Monday's period 2 will be displayed. 7. Repeat steps 3 through 5 to select the start time, heating temperature, and fan operation for Monday's heating/cooling period 2. 8. Repeat steps 3 through 7 for Monday's heat- ing/cooling periods 3 and 4.
29 Program Cooling Temperatures If outside temperature is below 50 ° F, we recommend that you remove the thermo- stat from the wall before proceeding with the following steps to program cooling temperatures. Personal injury and/or prop- erty damage could result from air condi- tioner compressor slugging.
30 continuously during this period, press FAN ON – AUTO until PRG FAN is displayed. 5. Repeat step 4 for Monday's heating cooling periods 3 and 4.
31 3. Press HOLD COPY once. COPY will appear on the display. A number from 1 to 7 will also be displayed, representing the day you have se- lected to copy from (Monday is 1, Tuesday is 2, etc.). For example, if in step 2 you selected to copy Wednesday's program, when you press HOLD COPY , COPY 3 will be displayed.
32 day's programming, go back to the program- ming instructions to correct the error. 6. Press RUN PRGM . 7. Press SYSTEM HEAT-OFF-COOL-AUTO until COOL is displayed. 8. Repeat steps 2 through 5 to check cooling temperatures. 9. Press RUN PRGM to begin program operation.
33 1. How can I permanently change a part of my program? Press VIEW PRGM and ADV DAY until you reach the time/temperature schedule you want. Then press TIME FWD or TIME BACK and and to change the program.
34 4. What happens if the electricity goes off or is manually shut off? If you have not installed 3 "AA" alkaline batter- ies, the display will go blank and the program will be lost in approximately one minute.
35 During periods of low humidity (especially during cold weather), you may feel or see a spark discharge when you touch the thermo- stat. This may cause the program to be lost or the thermostat to display incorrectly. To cor- rect this, remove the thermostat from the wall and disconnect the battery.
36 9. The display is flashing BATTERY. What does this mean? The "AA" batteries installed in the thermostat are low and should be replaced with fresh "AA" Energizer ® alkaline batteries. See OPERAT- ING YOUR THERMOSTAT . 10. The thermostat beeps every few minutes.
37 If the outside temperature is below 50 ° F, DO NOT use the button to move the temperature below the setpoint tempera- ture. Property damage may result due to compressor slugging. 13. Why doesn’t the temperature change at the time I programmed? There may be a number of causes for this situation.
38 • The blower delay feature is operating. This energy saving feature continues to blow conditioned air through the ducts after the system has turned off, rather than letting the air dissipate. 15. Why is the system turning on and off so frequently (seldom)? The anticipation setting is too low (high).
39 18. Do I have to reprogram my thermostat after I change the batteries? When the thermostat is on the wall and the system has power, the thermostat is being powered by a 24v AC source.
Part No. 37-5092A 9140 If you need further information on programming or operation, write to: White-Rodgers Division, Emerson Electric Co. 9797 Reavis Road St.
Ein wichtiger Punkt beim Kauf des Geräts White Rodgers 1F97W-71 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie White Rodgers 1F97W-71 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für White Rodgers 1F97W-71 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von White Rodgers 1F97W-71 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über White Rodgers 1F97W-71 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon White Rodgers 1F97W-71 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von White Rodgers 1F97W-71 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit White Rodgers 1F97W-71. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei White Rodgers 1F97W-71 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
