Benutzeranleitung / Produktwartung RF398PXV des Produzenten Whirlpool
Zur Seite of 28
ELECTRIC RANGE Self-Cleaning Model RF398PXV.
Contents Page BEFORE YOU USE YOUR RANGE. IMPORTANT SAFETY INSTRUCTIONS PARTS AND FEATURES USING YOUR RANGE.. Using the Surface Units Optional Canning Kit About the Electronic Oven Controls Clock Minute Timer Baking .
IMPORTANT SAFETY INSTRUCTIONS 1. DO NOT allow children to use or 6. KEEP pan handles turned in, but play with any part of the range, not over another surface unit to or leave them unattended near avoid burns, injury and to help it. They could be burned or prevent the utensil from being injured.
V 1.
SURFACE UNIT OVEN LIGHT INDICATORS SWITCH / RIGHT REAR ’ RIGHT SURFiCE RIGHT FRO‘NT CONTROL KNOB UNIT SIGNAL CONTROL KNOB Using your range llGHT Using the Surface Units Control knobs must be pushed in before turning them to a setting. They can be set anywhere between HI and OFF.
Use only flat-bottomed utensils for best cooking results and to prevent damage to the cooktop. Specialty items with rounded or ridged bottoms (woks, ridged bottom canners or tea kettles) are not recommended. See the Cooking Guide for important utensil information.
Digital Display/Clock When you are not using the oven, this is an accurate Digital Clock. When using the oven or Minute Timer, this displays time and temperature set- tings, and shows what Number Pads have been touched. The Command Pads tell the oven what to do and in what order.
1. Touch CLOCK SET. “0” appears in the Display. Within 5 seconds, touch Number Pads for the correct time of day The Display will show the numbers you touched, In the order you touched them. If the Number Pads are not touched wlthin 5 seconds, “PF” or the orlglnal tlme will show In the Display.
Baking 1. Position the rack(s) properly before turning on the oven. To change mck position, lift rack at front and pull out. 2. Touch BAKE TEMP”O”F” will appear in the Display 3. Touch Number Pads for desired temperature between 150”-509°F (65.
Bmiling 1. Position the rack before turning the oven on. See “Broil Chart” in the Cooking Guide or a reliable cookbook for recommended rack positions. Close the door to the Broil Stop position (open about 4 inches, 10.2 cm). The door will stay open by itself.
Baking Automatically The electronic controls are designed to turn the oven ON and OFF at the times YOU set, even if you are not around. Automatic baking is ideal for foods which do not require a preheated oven, such as meats and casseroles. Do not use the automatic cycle for cakes, cookies, etc.
To start baking at a later time and shut off automatically: 1. Make sure the Clock is set to the rlght tlme of day. 2. Position the oven rack(s) and place the food in the oven. 3. Touch BAKE TEMP and the desired oven temperature. 350°F is shown above.
KEEP WARM The Keep Warm cycle is preset atl70”F (76.6”C). Use it to keep hot foods warm before serving, or to warm plates, serving dishes, etc. To set the Keep Warm cycle: 1. Touch KEEP WARM. The Display will show “170°F” 2. Touch START. The oven will main- tain 170°F (76.
Other Operating Hints There are a number of things you should know about your electronic oven controls. Some of the items below are reminders, while others will be mentioned for the first time. l The control will accept temperatures between 150” and 509°F (65.
The Storage Drawer The storage drawer is for storing pots and pans. Use care when handling the drawer. Removing the storuge drawer 1. Pull drawer straight out to the first stop. Lift front and pull out to the second stop. Replacing the storage drawer 1.
Optional Door Panel Pat If you would like to change the color of your oven door glass to white or almond, you can order one of these kits; White (Kit No. 814069) or Almond (Kit No. 814070) from your Whirlpool Dealer. The kits include easy installation instructions.
3. Pull the surface unit straight away from the receptacle. Replacing 4. Lift out the reflector bowl and trim ring. See “Cleaning Chart” on page 22 for cleaning instructions. 2. Line up openings in the reflector bowl and notches in the trim ring with the surface unit receptacle and the element hold down clip.
CAUTION: Reflector bowis reflect heat back to the utensils on the surface units. They help catch spiiis. When they are kept clean, they reflect heat better and look new longer. if a trim ring gets discolored, some of five utensils may not be flat enough, or some may be too large for the surface unit.
Using the Self-Cleaning Cycle The Self-Cleaning cycle uses very high heat to burn away soil. Before you start, make sure you understand exactly how to use the Self-Cleaning cycle safely. Before You Start 1. Clean the shaded areas by DO NOT clea hand. They do not get hot enough In the fiberglass seal.
Setting the Controls Be sure the kitchen is ventilated during the Self-Cleaning cycle. This will help normal smoke and heat odors to disappear from the room as quickly as possible. The oven will accept any length of cleaning time up to 4 hours and 59 minutes.
Special Tips l Keep the kitchen well ventilated during the Self-Cleaning cycle to help get rid of normal heat, odors and smoke. l Clean the oven before it gets heavily soiled. Cleaning a very soiled oven takes longer and results in more smoke than usual.
Cleaning Chart PART Exterior surfaces WHAT TO USE Warm soapy water and a soft cloth. Plastic scrubbing pad for stubborn spots. HOW TO CLEAN . Wipe off regularly when oven is cool. l Do not allow food contalnlng acids (such as vinegar, tomato, lemon juice or milk) to remaln on surface.
Using and Replacing the The Cooktop light The fluorescent top light is under the control panel. Push it in and hold it fc Push it again to turn it off. I !C 3r ,ight Bulbs :ontrol panel, The Top Light Switch is on the a second or two to turn on the top light.
The Oven light The oven light will come on when you open the oven door. To turn the light on when the oven door is closed, push the Oven Light Switch on the oven control panel. Push it again to turn off the light. 3. Remove the light bulb from its socket.
If you need service or assistance, we suggest you follow these five steps: 1. Before calling for assistance... Performance problems often result from little things you can find and fix without tools of any kind. If nofhlng operates: l Is the power supply cord plugged into a live circuit with the proper volt- age? (See Installation Instructions.
3. If you need service*... Whirlpool has a nationwide network of fran- TECU-CARE i FRf.Jm~“l~~VICE_~j TECH-CARE serv- ice technicians are trained to fulfill the product war- ranty and provide after-warranty service, anywhere in the United States.
Notes 27.
LENGTH OF WARRANTY 1 WHIRLPOOL WILL PAY FOR FULL ONE-YEAR WARRANTY FSPa replacement parts and repair laborto From Date of Purchase correct defects in materials or workmanship. Service must be orovided bv a franchised 1 TECH-CAREa serv’ice compahy. WHIRLPOOL CORPORATION SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES.
Ein wichtiger Punkt beim Kauf des Geräts Whirlpool RF398PXV (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Whirlpool RF398PXV noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Whirlpool RF398PXV - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Whirlpool RF398PXV reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Whirlpool RF398PXV erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Whirlpool RF398PXV besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Whirlpool RF398PXV verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Whirlpool RF398PXV. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Whirlpool RF398PXV gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
